BCM56315A0KFEB - 24-Port Gigabit Ethernet L2 Switch ASIC | Broadcom
MPN: BCM56315A0KFEB ✓ सक्रियBCM56315A0KFEB अवलोकन
A network controller, in Broadcom's terminology, is a highly integrated switching silicon device that combines multiple Gigabit Ethernet MAC/PHY interfaces, frame processing, and Layer-2 switching control logic into a single IC. In the broader product hierarchy a switch controller sits below the networking switch category, below Ethernet switch ICs, and ultimately below integrated circuits and semiconductors. Instead of building a switch from dozens of discrete PHY and switching chips, an OEM designs one PCB around a single controller, which reduces board area, power consumption, and assembly cost while giving one programmable control plane for port configuration, QoS, and link management.
The headline characteristics of the BCM56315A0KFEB are its 24 Gigabit Ethernet ports and its Layer-2 multilayer switching architecture. Broadcom markets this device in its switch controller interface category, and the Broadcom Helix 1.5 designation identifies the generation of the silicon feature set it belongs to. Because the controller integrates the full switching datapath, the design engineer programs port speed, VLAN membership, and forwarding behaviour through a host interface rather than through discrete registers scattered across multiple devices.
The device is intended for designs where a single ASIC drives many copper ports. In practice this means access-layer switches, stackable or chassis-style access platforms, industrial and building-automation Ethernet switches, and smart-edge equipment with a large number of 10/100/1000BASE-T ports. Because all ports are served by one controller, port-to-port latency, per-port power, and system boot time are functions of the controller itself rather than of a chain of discrete devices, and thermal design must account for the concentrated dissipation of a single large die in a compact BGA footprint.
For board-level design, the critical first step is to obtain the package outline, ball map, and reference design from Broadcom's product documentation. The exact pin count, ball assignment, and exposed thermal land pattern must be taken directly from the manufacturer package drawing, because controller-level BGA packages are rarely publicly documented in detail and a wrong ball map is not recoverable in production. The controller also requires a stable clock reference, correct power-up sequencing across its core and I/O rails, and adequate PCB copper for heat spreading away from the exposed pad.
This page brings together the confirmed distributor catalogue footprint of the BCM56315A0KFEB, the documented package and ordering-code variants, the same-family drop-in alternatives, and the practical design guidance that a datasheet alone does not summarise - helping engineers qualify the part for a new Ethernet switching platform faster.
के लिए ड्रॉप-इन विकल्प BCM56315A0KFEB — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं BCM56315A0KFEB (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Switching Layer.
BCM56315A0KFEBG
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
BCM56315A0KFBEG
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
BCM56316A0KFEB
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
BCM56317A0KFEB
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
BCM56314A0KFBG
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
BCM56319A0KFEB
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →BCM56315A0KFEB Maximum Ratings और Electrical Characteristics
| Device Type | Network Controller / Switch Controller ASIC |
| Manufacturer | Broadcom Limited |
| Port Count | 24 Gigabit Ethernet ports |
| Switching Layer | Layer-2 multilayer switch |
| Product Family Designation | Helix 1.5 |
| Category (Distributor Listing) | Interface - Controllers |
| इंटरफ़ेस प्रकार | Ethernet switch controller with host/management interface |
| Ethernet Speed Class | Gigabit Ethernet (10/100/1000BASE-T class ports) |
| Package Type | BGA, surface mount |
| Lead-Free / Green Ordering Code Variant | BCM56315A0KFEBG listed separately by Broadcom Limited |
| माउंटिंग प्रकार | Surface Mount |
BCM56315A0KFEB bga, surface mount पिन कॉन्फ़िगरेशन गाइड
BCM56315A0KFEB (bga, surface mount पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: BCM56315A0KFEB.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
BCM56315A0KFEB के लिए उपयुक्त है 6 अनुप्रयोगs: Enterprise Access-Layer Switch, Industrial and Building-Automation Ethernet Switch, Smart Edge and IoT Gateway, Network Equipment Controller and Chassis Platform, Gigabit Ethernet Media and Copper-to-Copper Aggregation, Automotive and Vehicle Network Switching.
Enterprise Access-Layer Switch
The BCM56315A0KFEB suits access-layer switch platforms that terminate 24 copper Gigabit Ethernet ports behind a single ASIC. Concentrating 24 ports in one controller reduces board area, per-port power dissipation, and assembly cost compared with a design assembled from discrete PHY and switching devices, and it gives the system one management path for port speed, VLAN assignment, and QoS. The trade-off is thermal concentration: a single large die in a compact BGA must be matched with adequate copper pour and via arrays around the exposed pad, and the host software must drive all 24 ports through the controller's management interface rather than through scattered discrete register sets.
अनुशंसित
Industrial and Building-Automation Ethernet Switch
Industrial gateways and building-automation panels often need many deterministic Ethernet ports in a small, rugged enclosure, which is exactly where the BCM56315A0KFEB's integrated 24-port Gigabit Ethernet Layer-2 controller pays off. A single device reduces the number of components that must be qualified for vibration, temperature extremes, and long-life supply, while the Layer-2 multilayer switching fabric keeps traffic handling local to the panel. Designers should still plan for the controller's concentrated die heat inside a sealed enclosure, keep high-speed port traces short and length-matched, and isolate the switch's noisy power rails from adjacent sensor and actuator circuitry.
अनुशंसित
Smart Edge and IoT Gateway
Smart-edge gateways that aggregate many sensor and camera feeds benefit from the BCM56315A0KFEB because 24 Gigabit Ethernet ports and Layer-2 forwarding are consolidated into one ASIC with one host interface. This lowers per-port power in battery- or PoE-adjacent designs and keeps switching latency deterministic at the edge rather than pushing aggregation to a back-end switch. The engineering constraint is system power budget: since switching is handled on-chip, the controller's own consumption scales with port activity, so port-speed policing and unused-port shutdown should be enabled in firmware to avoid paying full cost with idle links.
अनुशंसित
Network Equipment Controller and Chassis Platform
Equipment controllers, chassis-based access platforms, and management appliances frequently need a high port count with a single, coherent switching silicon element, and the BCM56315A0KFEB delivers 24 Gigabit Ethernet ports with Layer-2 multilayer switching in one device. Using one controller simplifies the control-plane software model, because every port shares the same configuration and status register set instead of being spread across multiple parts. When integrating it into such a platform, confirm the Broadcom host interface requirements - reference clock, management bus, and reset timing - and reserve clean, separated supply rails for the controller core and its port I/O.
अनुशंसित
Gigabit Ethernet Media and Copper-to-Copper Aggregation
Aggregation nodes that combine multiple Gigabit Ethernet segments into a denser managed switch can use the BCM56315A0KFEB to terminate up to 24 links on one board. Doing so raises port density per square inch of PCB and reduces the number of clock, power, and reset domains a bring-up engineer has to characterise, which usually shortens schedule on first article builds. Care is needed at the signal layer: keep each 10/100/1000BASE-T PHY path over continuous reference planes, provide clean filtering and isolation between port supply and the controller, and validate magnetics placement against the port impedance budget in the Broadcom reference layout.
अनुशंसित
Automotive and Vehicle Network Switching
Vehicle Ethernet domain controllers and industrial-vehicle gateways are natural users of a 24-port Gigabit Ethernet Layer-2 controller such as the BCM56315A0KFEB, because one ASIC can terminate many network ports and localise Layer-2 traffic handling. Broadcom's Helix-generation controller family is used exactly for this kind of multi-port Ethernet termination. Before committing, confirm the automotive qualification status, the operating temperature grade, and the AEC-Q100 documentation for the exact ordering code, and design the thermal path so the controller's heat is spread into chassis copper rather than trapped against a sealed, low-conductivity enclosure.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा BCM56315A0KFEB — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | BCM56315A0KFEBG | BCM56315A0KFBEG | BCM56316A0KFEB | BCM56317A0KFEB | BCM56314A0KFBG | BCM56319A0KFEB |
|---|---|---|---|---|---|---|---|
| Package | BGA, surface mount (Broadcom BCM56315 controller land pattern) | BGA - identical land pattern | BGA - identical land pattern | BGA - same family, confirm ball map | BGA - same family, confirm ball map | BGA - adjacent family | BGA - same family, confirm ball map |
| Brand | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom |
| Device Type | 24-port Gigabit Ethernet L2 multilayer switch controller (network controller) | 24-port Gigabit Ethernet L2 switch controller | Same-family Layer-2 switch controller | Layer-2 multilayer switch controller | Layer-2 multilayer switch controller | Layer-2 switch controller, reduced capability | Layer-2 switch controller, expanded capability |
| Switching Layer | Layer-2 multilayer switch | Layer-2 multilayer switch | Layer-2 multilayer switch | Layer-2 multilayer switch | Layer-2 multilayer switch | Layer-2 switch controller | Layer-2 switch controller |
| Ordering Code / Lead-Free Suffix | BCM56315A0KFEB (base ordering code) | G-suffixed green/lead-free ordering code | G-suffixed ordering code | Base ordering code | Base ordering code | G-suffixed ordering code | Base ordering code |
मुख्य विशेषताएँ
- 24 Gigabit Ethernet ports consolidated into one Layer-2 controller ASIC (बनामBCM56314A0KFBG)
- Lead-free ordering code available without any electrical change (बनामBCM56315A0KFEB)
- Single-host-control-plane switching architecture (बनामBCM56319A0KFEB)
डिज़ाइन नोट्स
Estimated: concentrating 24 Gigabit Ethernet ports in one controller concentrates the die heat in a single area of the PCB. The controller's dissipation depends on port activity, which you control, so enable unused-port shutdown and port-speed policing in firmware to lower average power. Route the exposed-pad land pattern into a broad copper pour with a regular via array rather than into a thin thermal strip, and keep inductors, magnetics, and other heat sources physically away from the controller's under-bump area. Junction targets, thermal pad geometry, and the via pattern must come from the Broadcom package drawing and reference design.
The ball map and exposed-pad geometry for this BGA controller are defined in the Broadcom package drawing, and they must be transcribed without interpretation. Assign tracks directly from the ball map table in the datasheet and the package outline, and verify the land pattern against the exact ordering code placed, since ordering-code variants change the finish marking but not the land pattern. Reserve clean, separate supply rails for the controller core and its port I/O, place the decoupling network at the associated ball group, and provide a defined reset/clock sequence so that port links come up in a controlled order.
Because one controller serves all 24 ports, the power budget of the switch board is set by the controller rather than by a sum of many small PHYs. Sequence the rails so the core supply is stable before the port I/O supply ramps, keep the switching core's supply free of the port-side switching noise, and use separate filtering paths for the management/host rails. Validate the rail sequencing and current step at power-up in the hardware bring-up plan, since an uncontrolled inrush from 24 simultaneous port starts is a common early-revision failure mode in multi-port designs.
Two recurring mistakes derail multi-port switch bring-up. First, treating the controller as a generic PHY and distributing its host interface across several bus segments without following the Broadcom reference design; the management path must be a single coherent topology with defined timing. Second, leaving per-port magnetics and the Ethernet traces unmanaged, which can introduce crosstalk between adjacent ports once all 24 ports run at line rate simultaneously. Bring up one port at a time with the loopback and link-training checks defined by the platform, and only then enable the full port population.
Estimated: a 24-port controller switching at line rate generates significant high-frequency activity on a compact board. Keep the Layer-2 datapath and its clocking away from low-level analog, sensor, or audio paths on the same assembly, and use the recommended spread-spectrum or filtered reference clock arrangement where the platform design guide specifies it. Provide a solid, continuous ground reference under the controller region so the exposed pad and the ball field share a low-impedance return, and keep high-current port supply paths from crossing under the clock distribution network.
अनुपालन जानकारी
The G-suffixed ordering code BCM56315A0KFEBG indicates a green/lead-free variant in the Broadcom catalogue, but no RoHS, REACH, halogen-free, or conflict-minerals declaration was published in the distributor listings for either ordering code, so all fields remain unknown pending the Broadcom product documentation.