Broadcom

BCM5693A2KEB - 12-Port Gigabit Ethernet Switch | Broadcom

Teilenummer: BCM5693A2KEB ✓ Aktiv
480-pin eBGA Package
MOQ: 1 |

BCM5693A2KEB Übersicht

Broadcom BCM5693A2KEB is a 12-port Gigabit Ethernet Layer 2 switch IC with 1000 Mbps port performance, supplied in a 480-pin eBGA package. It is designed for high-density Ethernet switching systems in which multiple copper Gigabit Ethernet links must be combined with centralized Layer 2 traffic management. The combination of 12 Gigabit Ethernet ports and a large ball-grid-array package makes the device suitable for enterprise access switching, network-edge equipment, and other multiport Ethernet platforms.

An Ethernet switch is a semiconductor that receives Ethernet frames on multiple ports, examines their destination information, and forwards each frame only toward the appropriate port or output group. A Gigabit Ethernet interface supports data rates up to 1000 Mbps. As a Layer 2 switch, BCM5693A2KEB operates at the data-link layer, where frames and media access control information are handled. This device therefore belongs to the hierarchy Ethernet switch, Layer 2 switch, network interface IC, and integrated circuit.

The principal documented features are its 12-port Gigabit Ethernet configuration and 480-pin eBGA construction. Scalability is a defining characteristic of the BCM5693 family, allowing a single switching device to consolidate numerous Gigabit Ethernet connections rather than requiring a separate physical interface component for every port. The large eBGA package also provides the land-grid area needed for complex mixed-signal, digital, power, and high-speed networking connections in a multiport switching design.

BCM5693A2KEB is intended for equipment requiring numerous Gigabit Ethernet endpoints and centralized Layer 2 switching. Relevant installations include enterprise Ethernet switches, access-switch line cards, industrial Ethernet aggregation equipment, and communication systems with multiple network-facing ports. Its 1000 Mbps capability is appropriate for workstation access, network-device uplinks, embedded networking, and infrastructure equipment where copper Ethernet links must be consolidated without moving traffic through an external host processor.

Board design requires careful attention to the 480-ball eBGA footprint, high-speed differential routing, reference-clock integration, power-delivery architecture, and thermal performance. Because the package exposes a large number of mixed networking and supply connections, the manufacturer datasheet and pin-description table should govern land patterns, layer stack-up, decoupling, clock routing, and differential-pair geometry. Validate the assembled board for signal integrity at Gigabit Ethernet data rates and for adequate temperature rise at the highest expected port activity.

Selection should focus on port count, package compatibility, protocol requirements, clocking, power rails, and the complete manufacturer qualification process rather than on the MPN suffix alone. BCM5693A2KEB is the specific 12-port, 480-pin eBGA ordering option identified for the BCM5693 family. Its suitability for a new design should be confirmed against the current Broadcom product documentation, supported interfaces, electrical limits, and intended operating environment.

This product page organizes the confirmed BCM5693A2KEB identity, package information, application context, and engineering guidance. It also distinguishes confirmed manufacturer characteristics from electrical and pin-level details that require direct review of the Broadcom datasheet, helping designers evaluate switch-density and PCB implementation requirements before committing the complex eBGA device to a production layout.

Drop-in-Alternativen für BCM5693A2KEB – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

BCM5693A2KEB Grenzwerte & elektrische Eigenschaften

Device Type 12-port Gigabit Ethernet Layer 2 switch
Port Count 12 ports
Maximum Port Data Rate 1000 Mbps
Network Layer Layer 2
Gehäuse 480-pin eBGA
Montageart Surface Mount
Ethernet Standard Gigabit Ethernet

BCM5693A2KEB 480-pin ebga Pinbelegungsleitfaden

Pinbelegung für BCM5693A2KEB (480-pin ebga-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für BCM5693A2KEB im 480-pin ebga-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für BCM5693A2KEB.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

BCM5693A2KEB ist geeignet für 6 Anwendungs: Enterprise Access Switching, Industrial Ethernet Aggregation, Network-Equipment Line Cards, Embedded Network Gateways, Secure Network Appliances, Communication Infrastructure.

🌐

Enterprise Access Switching

BCM5693A2KEB fits enterprise access-switch line cards that consolidate 12 Gigabit Ethernet connections into one Layer 2 switching device. Its confirmed 12-port, 1000 Mbps capability provides the port density needed for workstation access, network-device uplinks, and service-node connectivity. The 480-pin eBGA package accommodates a complex mixed-signal switching design, but implementation must follow Broadcom's exact ball map, power architecture, clock requirements, and reference layout. The main engineering trade-off is high routing and assembly complexity compared with a small discrete Ethernet interface, balanced against the integration offered by a 12-port switch IC.

🏭

Industrial Ethernet Aggregation

BCM5693A2KEB is a candidate for industrial Ethernet aggregation equipment requiring multiple 1000 Mbps links in one switching engine. Twelve Layer 2 ports can connect programmable controllers, sensors, industrial computers, and plant-network infrastructure while centralizing frame forwarding. The 480-pin eBGA is well suited to a multilayer board with extensive high-speed routing, although designers must confirm operating-temperature limits, isolation requirements, electromagnetic-compatibility architecture, and environmental qualification. Its advantage is integration and port density; its tradeoff is a demanding package that needs disciplined power delivery, thermal design, and signal-integrity validation.

🖥️

Network-Equipment Line Cards

BCM5693A2KEB can support Ethernet line cards that add a dense bank of copper Gigabit Ethernet ports to routers, gateways, or communication platforms. Its 12-port Layer 2 configuration allows multiple system and service connections to be handled behind a single switching component. The large eBGA footprint provides access to a high pin count for networking, clocking, control, and supply connections, making it practical for multilayer PCB construction. Designers should balance switching density against heat dissipation, routing congestion, and assembly yield, and should use the Broadcom reference layout rather than extrapolating from a generic 480-pin BGA footprint.

🧩

Embedded Network Gateways

BCM5693A2KEB is applicable to embedded network gateways that must expose numerous Gigabit Ethernet interfaces for local equipment interconnection. A 12-port Layer 2 switch can connect cameras, controllers, industrial endpoints, and management devices while reducing the number of discrete switching blocks required. The 1000 Mbps port rate supports high-volume local traffic, while the 480-pin eBGA enables a compact but complex multilayer implementation. The primary design concern is integration of the switch with the gateway processor, clocks, PHYs or integrated transceiver interfaces, power sequencing, and thermal-control strategy required by the surrounding platform.

🔒

Secure Network Appliances

BCM5693A2KEB can serve as the Ethernet switching foundation in a secure gateway or firewall appliance with numerous internal and external connections. Twelve Gigabit Ethernet ports provide a practical way to segment management, service, storage, and user-facing traffic through Layer 2 switching. This role benefits from the device's high port density, but it also requires an architecture in which security policy, frame handling, and traffic-management functions are verified alongside the base switch behavior. Board-level validation should cover clock jitter, power sequencing, differential routing, thermal operation, and interoperability across every connected port configuration.

📡

Communication Infrastructure

BCM5693A2KEB is suitable for communication infrastructure equipment that aggregates 12 Gigabit Ethernet service or access links. Layer 2 forwarding can provide a consistent local transport foundation before traffic enters wider network fabrics, while 1000 Mbps operation aligns with Ethernet equipment interfaces. The 480-pin eBGA package supports the pin density expected in complex infrastructure boards, but the implementation must account for synchronized reference clocks, low-noise supplies, layer transitions, lossless routing practices, and heat removal from the densely connected switch. The design trade-off is substantial integration and BGA assembly complexity in exchange for fewer separate Ethernet interface components.

Zusammenfassung der empfohlenen Produkte

BCM5693A2KEB Broadcom Verwendet in: Enterprise Access Switching, Industrial Ethernet Aggregation, Network-Equipment Line Cards, Embedded Network Gateways, Secure Network Appliances, Communication Infrastructure BCM5693 Broadcom switch family associated with the exact ordering code Verwendet in: Enterprise Access Switching, Industrial Ethernet Aggregation, Network-Equipment Line Cards, Embedded Network Gateways, Secure Network Appliances, Communication Infrastructure
What is BCM5693A2KEB?
BCM5693A2KEB is a Broadcom 12-port Gigabit Ethernet Layer 2 switch IC in a 480-pin eBGA package. According to the Broadcom BCM5693 datasheet, the device is a scalable 12-port Gigabit Ethernet Layer 2 switch intended for high-density Ethernet switching systems. Its principal confirmed characteristics are 12 Gigabit Ethernet ports, operation through the data-link layer, and a surface-mount eBGA package.
How many Gigabit Ethernet ports does BCM5693A2KEB provide?
BCM5693A2KEB provides 12 Gigabit Ethernet ports. The Broadcom BCM5693 datasheet identifies the device as a scalable 12-port Gigabit Ethernet Layer 2 switch, while the BCM5693A2KEB listing identifies the same 12-port configuration for the exact ordering code. Each supported port is associated with Gigabit Ethernet operation up to 1000 Mbps, subject to the electrical and interface limits in the manufacturer documentation.
What package does BCM5693A2KEB use?
BCM5693A2KEB uses a 480-pin eBGA package. The exact BCM5693A2KEB product listing states the package configuration as 480-pin eBGA. Because this is a large ball-grid-array package, PCB design must follow the manufacturer land pattern and ball assignments rather than relying on a generic dual-inline package footprint. Pin-level implementation should be checked directly against the Broadcom pin-description table.
Where can I download the BCM5693A2KEB datasheet PDF?
The BCM5693A2KEB datasheet can be accessed through the Broadcom BCM5693 documentation link listed on this page. The manufacturer-family PDF is available at the official Broadcom BCM5693 datasheet URL, while a separate indexed PDF provides additional access to the same device-family documentation. Use the document revision matching the BCM5693A2KEB ordering information for final design decisions.
Where can I find the BCM5693A2KEB pinout?
The BCM5693A2KEB pinout is defined by the Broadcom BCM5693 datasheet's pin-description table and package drawing. The exact ordering code is associated with a 480-pin eBGA, so its ball map and board land pattern must be matched carefully. Because a generic package diagram cannot establish the exact function of every ball, use the manufacturer table before assigning power, ground, clocks, interfaces, and control signals.
Is BCM5693A2KEB suitable for a 12-port access switch?
Yes, BCM5693A2KEB is suitable for evaluating a 12-port Gigabit Ethernet access-switch design. Its confirmed 12-port configuration and Layer 2 switching function align directly with access equipment that aggregates multiple 1000 Mbps copper links. Qualification still depends on the required management interfaces, clock architecture, power rails, thermal conditions, PHY strategy, and whether the full switch subsystem meets the product's performance targets.
What can replace BCM5693A2KEB?
A valid drop-in replacement for BCM5693A2KEB must use the same 480-pin eBGA footprint and match its electrical, clocking, protocol, and management interfaces. No specifically verified pin-compatible replacement was identified for this exact ordering code, so another switch should not be treated as a drop-in part without engineering validation. When availability becomes the priority, submit the BCM5693A2KEB requirement through the Request a Quote form on this page.
Is BCM5693A2KEB the same as the BCM5693 family base device?
BCM5693A2KEB is an ordering code associated with the Broadcom BCM5693 family and its 12-port Gigabit Ethernet Layer 2 switch implementation. The family description and the exact-part listing are consistent, but a family name alone does not establish that every BCM5693 ordering code has identical package, temperature, lead-finish, or qualification attributes. Confirm the complete suffix meaning against Broadcom ordering information.
What are the key specifications of BCM5693A2KEB that engineers should know?
The key confirmed specifications are 12 Gigabit Ethernet ports, operation up to 1000 Mbps per supported port, Layer 2 switching, and a 480-pin eBGA package. Broadcom describes BCM5693 as a scalable 12-port Gigabit Ethernet Layer 2 switch. These facts make port density and package implementation the principal initial selection considerations, while voltage, clock, thermal, and protocol details require confirmation from the manufacturer datasheet.
BCM5693A2KEB vs a generic 12-port Ethernet switch IC: which is better?
BCM5693A2KEB is the better choice when the design specifically calls for Broadcom's 12-port Gigabit Ethernet Layer 2 switch in a 480-pin eBGA package. A generic switch may offer lower cost or a simpler interface, but it is not a drop-in substitute unless its ball assignment, electrical limits, clocking, management interfaces, and protocol behavior all match. Compare those requirements before selecting a different manufacturer.
When should I choose BCM5693A2KEB over another switching option?
Choose BCM5693A2KEB when the design benefits from 12 integrated Gigabit Ethernet Layer 2 ports and can support a 480-pin eBGA implementation. It is especially relevant to dense access-switch and line-card architectures where several 1000 Mbps interfaces must be consolidated. Choose another controller if the application needs fewer ports, a smaller package, different media interfaces, or a feature set not supported by the BCM5693 family.
Is BCM5693A2KEB suitable for industrial Ethernet equipment?
BCM5693A2KEB can be considered for industrial Ethernet equipment that requires 12 Gigabit Ethernet ports and a large eBGA switching device. Its confirmed port count and Layer 2 function suit multiport network infrastructure, but industrial suitability also depends on operating-temperature limits, qualification, power behavior, long-term availability, and product-specific environmental requirements. Verify those specifications with Broadcom before releasing an industrial design.
What is the lifecycle status of BCM5693A2KEB?
BCM5693A2KEB is presented as an orderable Broadcom Integrated Circuits product with a dedicated distributor listing and a broad distribution footprint. For a production program, request current lifecycle confirmation, lead time, minimum order quantity, and package delivery information through the Request a Quote form on this page. This avoids relying on a historical catalog status when the product's commercial state is time-sensitive.
Where can I buy BCM5693A2KEB and check lead time?
Use the Request a Quote form on this page to request BCM5693A2KEB availability, lead time, and minimum order quantity. The part is identified as a Broadcom 12-port Gigabit Ethernet Layer 2 switch in a 480-pin eBGA package. A direct sourcing request is especially useful for a complex surface-mount IC because allocation, date code, moisture-packaging condition, and shipment quantity should be confirmed for the production build.
How do I evaluate BCM5693A2KEB thermal and PCB requirements?
Evaluate BCM5693A2KEB thermal performance by combining the device power specification with the actual input voltage, port utilization, ambient temperature, and PCB thermal path. The 480-pin eBGA demands careful plane assignment, via placement, layer-stack construction, and heat spreading. Because the exact thermal and electrical limits are not stated in the basic part listing, use the Broadcom datasheet and application guidance for final copper and via design.

Technische Referenzdaten für BCM5693A2KEB – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose BCM5693A2KEB when the design needs a concentrated 12-port Gigabit Ethernet Layer 2 switching function and can accommodate a 480-pin eBGA assembly. It is a strong candidate for enterprise access-switch line cards, industrial Ethernet aggregation, embedded gateways, network appliances, and communication infrastructure. Its principal benefits are port density and integration at 1000 Mbps per port. A smaller or lower-port-count device may be easier to route, cool, and assemble when only a few Ethernet links are required. Before selecting another switching device as a substitute, verify the identical 480-pin ball assignment, electrical limits, reference-clock architecture, management interfaces, protocol behavior, and thermal requirements. Do not treat a functionally similar Ethernet switch as drop-in without those checks. Use the exact Broadcom documentation and ordering information as the controlling references for the BCM5693A2KEB implementation.

Vergleich mit Alternativen

Parameter Dieses Produkt
Brand Broadcom
Package 480-pin eBGA
Port Count 12 ports
Maximum Port Data Rate 1000 Mbps
Network Layer Layer 2
Device Function Ethernet switch
Mounting Type Surface Mount
Scalability Scalable 12-port Gigabit Ethernet switch

Wichtigste Unterscheidungsmerkmale

  • Consolidates 12 Gigabit Ethernet ports in one switching device (vs. Generic 8-port Gigabit Ethernet switch)
  • Uses a large 480-pin eBGA for complex multiport networking integration (vs. Generic 12-port switch in a smaller leaded package)
  • Targets Layer 2 Ethernet switching at 1000 Mbps per port (vs. Generic single-port Ethernet transceiver)

Designhinweise

Implement BCM5693A2KEB on a multilayer PCB using the exact Broadcom 480-pin eBGA land pattern, ball assignments, reference layers, and escape-routing guidance. Treat every high-speed Ethernet differential pair as a controlled-impedance structure, and verify pair symmetry, return paths, and connector or PHY escape geometry against the manufacturer's reference design. Avoid substituting a generic 480-ball library footprint because ball-map and substrate differences can prevent reliable operation.

Partition the BCM5693A2KEB supply network according to the manufacturer power architecture, placing local decoupling at the relevant package balls and using low-impedance plane connections for current return. Validate startup sequencing, voltage tolerance, noise behavior, and supply droop under simultaneous port activity. Any power rail not clearly identified in the datasheet should be treated as unresolved until its nominal value, tolerance, sequencing relationship, and decoupling requirements are established.

Estimate the worst-case switching loss from the device power specification, port activity, ambient temperature, and the actual PCB construction rather than relying on package size alone. Provide uninterrupted thermal planes where the pin map permits, distribute thermal vias under the device according to the manufacturer layout, and model the assembled board with its enclosure and neighboring heat sources. Validate the hottest operating corner because a 12-port, 1000 Mbps switching load can be materially more demanding than an idle condition.

Design reference-clock and Ethernet signal paths for the impedance and topology required by the Broadcom interface specification. Check clock jitter, skew between related signals, insertion loss, return loss, and crosstalk through simulation or hardware measurement. Maintain the manufacturer-defined spacing from noisy switching and power circuitry, and include controlled test points that allow clock quality and individual Ethernet links to be measured without altering production routing.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact BCM5693A2KEB ordering code. Confirm these attributes with Broadcom or the authorized source before production release.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

BCM5693A2KEB BCM5693A2KEB datasheet BCM5693A2KEB datasheet pdf BCM5693A2KEB pinout Broadcom BCM5693A2KEB BCM5693A2KEB 12 port Gigabit switch BCM5693A2KEB 480 pin eBGA BCM5693A2KEB access switch BCM5693A2KEB equivalent BCM5693A2KEB replacement BCM5693A2KEB price BCM5693A2KEB stock

Verwandte Bauteile & Begriffe

Broadcom BCM5693A2KEB BCM5693 12-port Gigabit Ethernet switch Ethernet switch Layer 2 switch network interface IC integrated circuit Gigabit Ethernet 1000 Mbps 480-pin eBGA BGA package family surface-mount package semiconductor enterprise access switching industrial Ethernet aggregation network line card embedded network gateway network security appliance communication infrastructure Ethernet frame forwarding reference clock differential pair signal integrity surface mount
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen