BCM5693A2KEB - 12-Port Gigabit Ethernet Switch | Broadcom
MPN: BCM5693A2KEB ✓ Hoạt độngBCM5693A2KEB Tóm tắt
An Ethernet switch is a semiconductor that receives Ethernet frames on multiple ports, examines their destination information, and forwards each frame only toward the appropriate port or output group. A Gigabit Ethernet interface supports data rates up to 1000 Mbps. As a Layer 2 switch, BCM5693A2KEB operates at the data-link layer, where frames and media access control information are handled. This device therefore belongs to the hierarchy Ethernet switch, Layer 2 switch, network interface IC, and integrated circuit.
The principal documented features are its 12-port Gigabit Ethernet configuration and 480-pin eBGA construction. Scalability is a defining characteristic of the BCM5693 family, allowing a single switching device to consolidate numerous Gigabit Ethernet connections rather than requiring a separate physical interface component for every port. The large eBGA package also provides the land-grid area needed for complex mixed-signal, digital, power, and high-speed networking connections in a multiport switching design.
BCM5693A2KEB is intended for equipment requiring numerous Gigabit Ethernet endpoints and centralized Layer 2 switching. Relevant installations include enterprise Ethernet switches, access-switch line cards, industrial Ethernet aggregation equipment, and communication systems with multiple network-facing ports. Its 1000 Mbps capability is appropriate for workstation access, network-device uplinks, embedded networking, and infrastructure equipment where copper Ethernet links must be consolidated without moving traffic through an external host processor.
Board design requires careful attention to the 480-ball eBGA footprint, high-speed differential routing, reference-clock integration, power-delivery architecture, and thermal performance. Because the package exposes a large number of mixed networking and supply connections, the manufacturer datasheet and pin-description table should govern land patterns, layer stack-up, decoupling, clock routing, and differential-pair geometry. Validate the assembled board for signal integrity at Gigabit Ethernet data rates and for adequate temperature rise at the highest expected port activity.
Selection should focus on port count, package compatibility, protocol requirements, clocking, power rails, and the complete manufacturer qualification process rather than on the MPN suffix alone. BCM5693A2KEB is the specific 12-port, 480-pin eBGA ordering option identified for the BCM5693 family. Its suitability for a new design should be confirmed against the current Broadcom product documentation, supported interfaces, electrical limits, and intended operating environment.
This product page organizes the confirmed BCM5693A2KEB identity, package information, application context, and engineering guidance. It also distinguishes confirmed manufacturer characteristics from electrical and pin-level details that require direct review of the Broadcom datasheet, helping designers evaluate switch-density and PCB implementation requirements before committing the complex eBGA device to a production layout.
Bộ thay thế dễ dàng lắp đặt cho BCM5693A2KEB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếBCM5693A2KEB Tỷ lệ tối đa & tính chất điện
| Device Type | 12-port Gigabit Ethernet Layer 2 switch |
| Port Count | 12 ports |
| Maximum Port Data Rate | 1000 Mbps |
| Network Layer | Layer 2 |
| Hộp | 480-pin eBGA |
| Kiểu lắp đặt | Surface Mount |
| Ethernet Standard | Gigabit Ethernet |
Hướng dẫn cấu hình chân BCM5693A2KEB 480-pin ebga
Cấu hình chân cho BCM5693A2KEB (480-pin ebga gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho BCM5693A2KEB.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
BCM5693A2KEB phù hợp cho 6 Áp dụngs: Enterprise Access Switching, Industrial Ethernet Aggregation, Network-Equipment Line Cards, Embedded Network Gateways, Secure Network Appliances, Communication Infrastructure.
Enterprise Access Switching
BCM5693A2KEB fits enterprise access-switch line cards that consolidate 12 Gigabit Ethernet connections into one Layer 2 switching device. Its confirmed 12-port, 1000 Mbps capability provides the port density needed for workstation access, network-device uplinks, and service-node connectivity. The 480-pin eBGA package accommodates a complex mixed-signal switching design, but implementation must follow Broadcom's exact ball map, power architecture, clock requirements, and reference layout. The main engineering trade-off is high routing and assembly complexity compared with a small discrete Ethernet interface, balanced against the integration offered by a 12-port switch IC.
Được đề xuất
Industrial Ethernet Aggregation
BCM5693A2KEB is a candidate for industrial Ethernet aggregation equipment requiring multiple 1000 Mbps links in one switching engine. Twelve Layer 2 ports can connect programmable controllers, sensors, industrial computers, and plant-network infrastructure while centralizing frame forwarding. The 480-pin eBGA is well suited to a multilayer board with extensive high-speed routing, although designers must confirm operating-temperature limits, isolation requirements, electromagnetic-compatibility architecture, and environmental qualification. Its advantage is integration and port density; its tradeoff is a demanding package that needs disciplined power delivery, thermal design, and signal-integrity validation.
Được đề xuất
Network-Equipment Line Cards
BCM5693A2KEB can support Ethernet line cards that add a dense bank of copper Gigabit Ethernet ports to routers, gateways, or communication platforms. Its 12-port Layer 2 configuration allows multiple system and service connections to be handled behind a single switching component. The large eBGA footprint provides access to a high pin count for networking, clocking, control, and supply connections, making it practical for multilayer PCB construction. Designers should balance switching density against heat dissipation, routing congestion, and assembly yield, and should use the Broadcom reference layout rather than extrapolating from a generic 480-pin BGA footprint.
Được đề xuất
Embedded Network Gateways
BCM5693A2KEB is applicable to embedded network gateways that must expose numerous Gigabit Ethernet interfaces for local equipment interconnection. A 12-port Layer 2 switch can connect cameras, controllers, industrial endpoints, and management devices while reducing the number of discrete switching blocks required. The 1000 Mbps port rate supports high-volume local traffic, while the 480-pin eBGA enables a compact but complex multilayer implementation. The primary design concern is integration of the switch with the gateway processor, clocks, PHYs or integrated transceiver interfaces, power sequencing, and thermal-control strategy required by the surrounding platform.
Được đề xuất
Secure Network Appliances
BCM5693A2KEB can serve as the Ethernet switching foundation in a secure gateway or firewall appliance with numerous internal and external connections. Twelve Gigabit Ethernet ports provide a practical way to segment management, service, storage, and user-facing traffic through Layer 2 switching. This role benefits from the device's high port density, but it also requires an architecture in which security policy, frame handling, and traffic-management functions are verified alongside the base switch behavior. Board-level validation should cover clock jitter, power sequencing, differential routing, thermal operation, and interoperability across every connected port configuration.
Được đề xuất
Communication Infrastructure
BCM5693A2KEB is suitable for communication infrastructure equipment that aggregates 12 Gigabit Ethernet service or access links. Layer 2 forwarding can provide a consistent local transport foundation before traffic enters wider network fabrics, while 1000 Mbps operation aligns with Ethernet equipment interfaces. The 480-pin eBGA package supports the pin density expected in complex infrastructure boards, but the implementation must account for synchronized reference clocks, low-noise supplies, layer transitions, lossless routing practices, and heat removal from the densely connected switch. The design trade-off is substantial integration and BGA assembly complexity in exchange for fewer separate Ethernet interface components.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho BCM5693A2KEB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Broadcom |
| Package | 480-pin eBGA |
| Port Count | 12 ports |
| Maximum Port Data Rate | 1000 Mbps |
| Network Layer | Layer 2 |
| Device Function | Ethernet switch |
| Mounting Type | Surface Mount |
| Scalability | Scalable 12-port Gigabit Ethernet switch |
Bảo phân biệt quan trọng
- Consolidates 12 Gigabit Ethernet ports in one switching device (vsGeneric 8-port Gigabit Ethernet switch)
- Uses a large 480-pin eBGA for complex multiport networking integration (vsGeneric 12-port switch in a smaller leaded package)
- Targets Layer 2 Ethernet switching at 1000 Mbps per port (vsGeneric single-port Ethernet transceiver)
Ghi chú thiết kế
Implement BCM5693A2KEB on a multilayer PCB using the exact Broadcom 480-pin eBGA land pattern, ball assignments, reference layers, and escape-routing guidance. Treat every high-speed Ethernet differential pair as a controlled-impedance structure, and verify pair symmetry, return paths, and connector or PHY escape geometry against the manufacturer's reference design. Avoid substituting a generic 480-ball library footprint because ball-map and substrate differences can prevent reliable operation.
Partition the BCM5693A2KEB supply network according to the manufacturer power architecture, placing local decoupling at the relevant package balls and using low-impedance plane connections for current return. Validate startup sequencing, voltage tolerance, noise behavior, and supply droop under simultaneous port activity. Any power rail not clearly identified in the datasheet should be treated as unresolved until its nominal value, tolerance, sequencing relationship, and decoupling requirements are established.
Estimate the worst-case switching loss from the device power specification, port activity, ambient temperature, and the actual PCB construction rather than relying on package size alone. Provide uninterrupted thermal planes where the pin map permits, distribute thermal vias under the device according to the manufacturer layout, and model the assembled board with its enclosure and neighboring heat sources. Validate the hottest operating corner because a 12-port, 1000 Mbps switching load can be materially more demanding than an idle condition.
Design reference-clock and Ethernet signal paths for the impedance and topology required by the Broadcom interface specification. Check clock jitter, skew between related signals, insertion loss, return loss, and crosstalk through simulation or hardware measurement. Maintain the manufacturer-defined spacing from noisy switching and power circuitry, and include controlled test points that allow clock quality and individual Ethernet links to be measured without altering production routing.
Thông tin tuân thủ
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact BCM5693A2KEB ordering code. Confirm these attributes with Broadcom or the authorized source before production release.