Broadcom

BCM5698B0IPBG - 12-Port Gigabit Ethernet Switch | Broadcom

Teilenummer: BCM5698B0IPBG ✓ Aktiv
PBG Package
MOQ: 1 |

BCM5698B0IPBG Übersicht

Broadcom BCM5698B0IPBG is a 12-port Layer 2 Gigabit Ethernet switch designed for high-speed network aggregation, switching, and industrial Ethernet equipment. The device provides 12 Gigabit Ethernet ports in a Broadcom PBG package and is identified as a Layer 2 switching IC within the integrated interface semiconductor hierarchy. Its architecture supports the aggregation of multiple Gigabit Ethernet links into higher-bandwidth network backbones, making it suitable for managed network infrastructure, industrial automation systems, and embedded communication equipment.

An Ethernet switch is a semiconductor that receives frames on one port, examines addressing information, and forwards traffic to the appropriate destination port. A Layer 2 switch performs this operation at the data-link layer rather than routing packets through the network layer. By integrating 12 Gigabit Ethernet ports into one package, the BCM5698B0IPBG reduces the component count and board complexity required for a multiport Ethernet aggregation point.

The primary documented performance attribute is support for 12 Gigabit Ethernet ports. Gigabit Ethernet corresponds to a nominal 1 Gbit/s network rate per port, allowing the switch fabric to aggregate substantial aggregate traffic when several ports operate simultaneously. The exact forwarding rate, latency, internal memory configuration, host interface, management features, and supported PHY types must be confirmed in the manufacturer datasheet before final system qualification.

The PBG package designation identifies the physical assembly used by this ordering code, but detailed dimensions, pin assignments, thermal limits, and exposed-pad requirements are not stated in the available product records. Engineers should use the BCM5698 datasheet and the package drawing when assigning power, ground, reference-clock, management, and media signals. The B0 revision suffix should also be checked against the latest manufacturer change notices.

Typical deployments include industrial Ethernet switches, factory-floor control networks, access-network aggregation, embedded telecom equipment, and network appliances requiring multiple copper or fiber-facing ports. In these systems, the switch can consolidate several 1 Gbit/s links before forwarding traffic to an uplink, storage system, or controller.

Power delivery, clock quality, thermal management, and signal-integrity layout are critical design considerations. Follow the manufacturer’s recommended decoupling network, provide a stable low-noise reference clock where required, and validate magnetics or PHY integration according to the supported copper-media architecture. Confirm lane ratings, auto-negotiation behavior, and environmental limits on the selected board revision.

This page consolidates the verified port count, Layer 2 function, package designation, sourcing information, replacement constraints, and engineering guidance needed to evaluate the BCM5698B0IPBG for a 12-port Gigabit Ethernet design.

Drop-in-Alternativen für BCM5698B0IPBG – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

BCM5698B0KPBG

✅ Drop-In
Broadcom
📦 PBG
12-port enhanced Layer 2 Gigabit Ethernet switch · Gigabit Ethernet · 12 ports · Layer 2 · Ethernet frame switching · Drivers, receivers, and transceivers · Lead-free · Broadcom Limited

Preis auf Anfrage

Datenblatt ansehen →

BCM5698B0IPBG Grenzwerte & elektrische Eigenschaften

Product Type Layer 2 Gigabit Ethernet switch
Ethernet Port Count 12 ports
Nominal Ethernet Rate 1 Gbit/s per port
Network Layer Layer 2
Manufacturer Broadcom
Orderable MPN BCM5698B0IPBG
Revision Code B0
Package Designation PBG

BCM5698B0IPBG pbg Pinbelegungsleitfaden

Pinbelegung für BCM5698B0IPBG (pbg-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für BCM5698B0IPBG im pbg-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für BCM5698B0IPBG.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

BCM5698B0IPBG ist geeignet für 6 Anwendungs: Industrial Ethernet Aggregation, Managed Network Appliance, Factory Control Network Gateway, Access Network Uplink Concentrator, Embedded Telecom Equipment, Power and Building Automation.

🏭

Industrial Ethernet Aggregation

The Broadcom BCM5698B0IPBG fits an industrial Ethernet aggregation point because it integrates 12 nominal 1 Gbit/s Layer 2 ports in one PBG package. A controller can use the switching fabric to consolidate traffic from machines, sensors, and remote I/O before forwarding it to a plant uplink. The multiport integration reduces the number of discrete switch devices and associated PCB routing. Before design release, confirm the exact temperature grade, copper PHY configuration, clock requirements, power budget, and industrial qualification in the manufacturer documentation.

🌐

Managed Network Appliance

BCM5698B0IPBG is suitable for a managed network appliance that needs to aggregate twelve Gigabit Ethernet connections while performing Layer 2 forwarding. Its 12-port arrangement provides a practical front-panel scale for access equipment, and the 1 Gbit/s-per-port nominal rate supports common Ethernet endpoints. The system designer must allocate pins and board area for the PBG package, provide the required reference clock and power rails, and validate management, address-table, and traffic-control behavior against the selected firmware and device revision.

⚙️

Factory Control Network Gateway

The BCM5698B0IPBG can serve as the central switching element in a factory control-network gateway, where controllers and machine vision nodes require dedicated Gigabit Ethernet paths. Twelve Layer 2 ports allow local traffic to remain within the switched network while selected traffic reaches a higher-level uplink. Because the product is a switch IC rather than a complete interface module, the enclosure also needs magnetics or supported PHY integration, isolation requirements, clock distribution, thermal provisions, and management software selected for the target system.

📡

Access Network Uplink Concentrator

BCM5698B0IPBG is appropriate for an access-network concentrator that combines multiple Gigabit Ethernet service links behind a common uplink. The 12-port Layer 2 architecture gives a compact platform for local subscriber aggregation while maintaining 1 Gbit/s service rates on each nominal port. Implementation requires careful PBG footprint design, specified supply sequencing, low-noise clocking, and a copper-media subsystem compatible with the device’s supported interface configuration. Verify buffering and forwarding performance in the manufacturer datasheet before sizing an uplink beyond individual port rates.

📞

Embedded Telecom Equipment

The Broadcom BCM5698B0IPBG can support embedded telecom equipment that requires multiple Layer 2 Ethernet ports for internal routing, service handoff, or test interfaces. Combining twelve Gigabit Ethernet ports in a PBG package simplifies the PCB compared with a design using many single-port devices. Thermal performance and signal integrity remain central because the switch fabric sits close to high-speed PHY, magnetics, and clock circuitry. Validate conducted emissions, isolation, grounding, reference-clock jitter, and startup behavior against the product’s electrical and environmental limits.

🏢

Power and Building Automation

BCM5698B0IPBG can be evaluated for power and building automation systems that connect controllers, meters, cameras, and access points over separate Gigabit Ethernet links. Twelve Layer 2 ports offer centralized switching in control cabinets or edge gateways and help isolate local traffic from the backbone uplink. The integration must account for the PBG package footprint, the device’s electrical requirements, thermal environment, and supported media interface. Confirm operating-temperature limits and lifecycle commitments before deployment in continuously energized building or utility infrastructure.

Zusammenfassung der empfohlenen Produkte

BCM5698B0IPBG Broadcom Verwendet in: Industrial Ethernet Aggregation, Managed Network Appliance, Factory Control Network Gateway, Access Network Uplink Concentrator, Embedded Telecom Equipment, Power and Building Automation BCM5698B0KPBG Closest documented same-family switching candidate Verwendet in: Industrial Ethernet Aggregation, Managed Network Appliance, Factory Control Network Gateway, Access Network Uplink Concentrator, Embedded Telecom Equipment, Power and Building Automation
What is the BCM5698B0IPBG?
The BCM5698B0IPBG is a Broadcom 12-port Layer 2 Gigabit Ethernet switch integrated circuit in a PBG package. According to the Broadcom BCM5698 family datasheet, the device is a 12-port Gigabit Ethernet Layer 2 switch, making it appropriate for Ethernet aggregation equipment, industrial networking, access systems, and embedded network infrastructure. Its 1 Gbit/s-per-port port count allows multiple Gigabit Ethernet links to be consolidated behind a higher-capacity uplink.
How many Gigabit Ethernet ports does BCM5698B0IPBG have?
The BCM5698B0IPBG has 12 Gigabit Ethernet ports. The Broadcom BCM5698 family datasheet identifies it as a 12-port Gigabit Ethernet Layer 2 switch, and the manufacturer product record confirms the same 12-port configuration for BCM5698B0IPBG. This makes the device suitable for multiport aggregation where twelve 1 Gbit/s links must be switched through a common network fabric.
Where can I download the BCM5698B0IPBG datasheet PDF?
The BCM5698B0IPBG datasheet can be accessed through the Broadcom BCM5698 family PDF linked on this page. The available document describes the device as a 12-port Gigabit Ethernet Layer 2 switch. Before releasing a PCB, obtain the current manufacturer document and package drawing to verify pin assignments, electrical limits, clocking, power sequencing, and thermal requirements for the exact ordering code.
Where can I find the BCM5698B0IPBG pinout?
The BCM5698B0IPBG pinout is located in the pin-description section and package drawing of the Broadcom BCM5698 family datasheet. Use that table when assigning power supplies, grounds, port signals, management signals, and reference-clock connections. The public product records establish the PBG package designation but do not enumerate every terminal, so no incomplete pin list is substituted for the manufacturer pin table.
What is the best drop-in replacement for BCM5698B0IPBG?
BCM5698B0KPBG is the closest documented same-family candidate for BCM5698B0IPBG because both use the B0 revision and PBG package designation. A valid drop-in qualification still requires confirmation of temperature grade, pin mapping, electrical limits, management firmware, and media-interface compatibility. Do not approve a replacement solely from the package suffix; compare the manufacturer ordering table and complete a hardware and traffic test.
Can BCM5698B0KPBG replace BCM5698B0IPBG?
BCM5698B0KPBG may serve as a hardware replacement candidate for BCM5698B0IPBG, but final approval depends on the ordering-code differences. Both parts appear in the BCM5698 B0 PBG family and are associated with the same 12-port Gigabit Ethernet Layer 2 function. Verify the temperature grade, power and clock requirements, pinout, PHY configuration, management behavior, and any approved product-change notices before substituting it in production.
When should I choose BCM5698B0IPBG over another Ethernet switch?
Choose BCM5698B0IPBG when the design requires a Broadcom 12-port Gigabit Ethernet Layer 2 switch in the PBG package and the system can support its specified electrical, clocking, thermal, and management requirements. Choose another device only when the interface, environmental qualification, media support, software model, lifecycle status, or supply arrangement offers a concrete engineering advantage rather than merely a different port count.
Is BCM5698B0IPBG suitable for industrial Ethernet equipment?
BCM5698B0IPBG can be evaluated for industrial Ethernet equipment because it provides 12 Gigabit Ethernet Layer 2 ports, but suitability depends on the exact operating-temperature grade, reliability requirements, and environmental qualification documented for this ordering code. Confirm the temperature range, isolation needs, surge requirements, thermal performance, and product qualification in the manufacturer documentation before industrial deployment.
What can replace BCM5698B0IPBG?
BCM5698B0KPBG is the leading documented replacement candidate because it shares the Broadcom BCM5698 B0 family, the 12-port Gigabit Ethernet Layer 2 function, and the PBG package designation. Treat it as a conditional replacement until temperature, pin, clock, electrical, management, and lifecycle differences are resolved. The available cross-reference information does not establish five fully qualified pin-to-pin drop-in alternatives.
Is BCM5698B0IPBG the same as BCM5698B0KPBG?
BCM5698B0IPBG and BCM5698B0KPBG are closely related Broadcom BCM5698 B0 PBG devices, but they should not be assumed identical without checking the manufacturer ordering table. Their likely distinction is an order-code or qualification attribute rather than the core 12-port Gigabit Ethernet Layer 2 function. Review temperature grade, pin configuration, electrical characteristics, firmware support, and lifecycle status before treating either part as an exact substitute.
BCM5698B0IPBG vs BCM5698B0KPBG — which is better for an industrial switch?
The better choice is determined by the exact industrial temperature and qualification requirements of BCM5698B0IPBG versus BCM5698B0KPBG. Both devices share the documented B0 revision, PBG package, and 12-port Gigabit Ethernet Layer 2 basis. Select the ordering code whose temperature grade, electrical ratings, lifecycle commitments, and supported configuration match the product design, then verify software and firmware compatibility.
Where can I buy BCM5698B0IPBG and check current availability?
Use the Request a Quote form on this page to request BCM5698B0IPBG availability, lead time, and a current quotation. The form is the appropriate channel for order quantities, delivery schedules, and lifecycle planning. The device is listed by Broadcom as a 12-port Layer 2 Gigabit Ethernet switch in the PBG package, and its availability should be confirmed against the selected B0 ordering code.
What is the price of BCM5698B0IPBG?
The current BCM5698B0IPBG quotation is obtained through the Request a Quote form on this page. Quote requests should state the required quantity, target delivery date, and approved packaging or reel configuration. Because commercial terms and component availability can change, the page’s structured pricing panel and quotation response are more appropriate than a static price claim.
What is the lead time for BCM5698B0IPBG?
The current lead time for BCM5698B0IPBG is confirmed through the Request a Quote form on this page. Include the annual and build quantities, production start date, and required package delivery format in the request. For new or changing programs, also request lifecycle-status confirmation and any schedule for last-time-buy notifications.
What are the key specifications of BCM5698B0IPBG that engineers should know?
The essential confirmed specifications of BCM5698B0IPBG are its Broadcom origin, 12-port Gigabit Ethernet configuration, Layer 2 switching function, B0 revision code, and PBG package designation. The device therefore integrates twelve nominal 1 Gbit/s network ports into a multiport switching component. Supply voltage, pin count, package dimensions, thermal limits, management interfaces, PHY support, and operating-temperature limits must be taken from the manufacturer datasheet before schematic release.

Technische Referenzdaten für BCM5698B0IPBG – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose BCM5698B0IPBG when the system requires a Broadcom 12-port Gigabit Ethernet Layer 2 switch in the PBG package and its documented B0 revision is acceptable. It is a strong fit for industrial aggregation, access concentration, managed network appliances, and embedded telecom equipment. BCM5698B0KPBG is the closest identified hardware candidate because it shares the B0 revision, PBG package designation, and 12-port Gigabit Ethernet function. Select that candidate only after confirming the ordering-code difference, temperature range, electrical limits, pin behavior, clocking, management configuration, and lifecycle commitments. No additional drop-in alternatives were established from the available records, so do not substitute a different switch family merely because it also offers 12 ports. A different device is appropriate only if its package, Layer 2 behavior, media interfaces, management architecture, thermal design, and qualification are deliberately approved as a redesign rather than a drop-in replacement.

Vergleich mit Alternativen

Parameter Dieses Produkt BCM5698B0KPBG
Package PBG PBG - same package designation
Brand Broadcom Broadcom
Ethernet Port Count 12 ports 12 ports
Nominal Port Rate 1 Gbit/s per port 1 Gbit/s per port
Switching Layer Layer 2 Layer 2
Revision Code B0 B0
Ordering-Code Difference I suffix designation K suffix designation; exact qualification difference requires manufacturer confirmation

Wichtigste Unterscheidungsmerkmale

  • Documented 12-port integration (vs. BCM5698B0KPBG)
  • Single-package network aggregation (vs. BCM5698B0KPBG)
  • B0 revision continuity (vs. BCM5698B0KPBG)

Designhinweise

Use the manufacturer PBG land pattern and pin-description table as the authority for placement and routing. Keep power and ground connections short, place required bypass capacitors at their designated pins, and preserve the package’s thermal-current path through board copper or other approved heat-spreading features. A high-layer-count PCB may be necessary because a 12-port Gigabit Ethernet design also requires controlled-impedance traces, careful return paths, and separation between sensitive clock or media signals and switching nodes.

Treat the reference clock, management interfaces, and high-speed media connections as separate signal-integrity domains. Follow the manufacturer’s clock topology and impedance guidance, avoid routing the reference clock adjacent to noisy digital nets, and use continuous reference planes where the stackup permits. For copper media, apply the vendor-recommended line geometry, component placement, isolation spacing, and magnetics or PHY interface layout; otherwise nominal 1 Gbit/s compliance may be compromised by reflections, crosstalk, or jitter.

Calculate heat dissipation from the actual input voltage, core current, switching activity, and ambient temperature rather than relying only on nominal port count. Validate the PBG package with the manufacturer’s recommended PCB construction and airflow assumptions, and monitor the hottest locations in a fully populated, worst-case traffic test. Estimated: if the design dissipates 4 W, an assumed 25 C/W junction-to-ambient path would produce about 100 C rise before allowing for copper spreading; this calculation is illustrative and must be replaced with the datasheet thermal model and measured board data.

Do not treat a shared PBG package suffix as sufficient proof of interchangeability. Before substituting BCM5698B0KPBG for BCM5698B0IPBG, compare the ordering table, temperature grade, supply limits, pin functions, clock requirements, PHY configuration, management interfaces, firmware support, and lifecycle notices. After hardware equivalence is established, run traffic, thermal, reset, power-sequencing, and interoperability tests because a package-compatible device can still behave differently at the system level.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance attributes are not stated in the available product records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status using the current Broadcom product documentation before procurement release.

Daten verifiziert am: 2026-11-20 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

BCM5698B0IPBG datasheet BCM5698B0IPBG specifications BCM5698B0IPBG pinout BCM5698B0IPBG datasheet pdf Broadcom BCM5698B0IPBG BCM5698B0IPBG PBG package BCM5698B0IPBG equivalent BCM5698B0IPBG replacement BCM5698B0IPBG vs BCM5698B0KPBG 12 port Gigabit Ethernet switch IC BCM5698B0IPBG price BCM5698B0IPBG stock Where to buy BCM5698B0IPBG BCM5698B0IPBG industrial Ethernet switch What is BCM5698B0IPBG used for

Verwandte Bauteile & Begriffe

Broadcom BCM5698B0IPBG BCM5698B0KPBG BCM5698 12-port Gigabit Ethernet switch Layer 2 switching Ethernet switch Gigabit Ethernet 1 Gbit/s Ethernet integrated circuit interface semiconductor network aggregation industrial Ethernet access network managed network appliance PBG package surface-mount semiconductor reference clock switching fabric frame buffer copper PHY power management thermal management signal integrity RoHS REACH AEC-Q100
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen