Broadcom

BCM5715CKPBG - Dual-Port PCIe GBE Controller | Broadcom

Teilenummer: BCM5715CKPBG ✗ Abgekündigt
PBG ordering variant Package
MOQ: 1 |

BCM5715CKPBG Übersicht

The Broadcom BCM5715CKPBG is a PCI Express dual-port Gigabit Ethernet controller with two 1000 Mb/s network interfaces, combining a PCIe host interface with dual-port Ethernet connectivity in one specialized interface IC. The PBG ordering variant is identified for server, embedded networking, and industrial communication systems that require two network ports on a single PCI Express link.

A Gigabit Ethernet controller is a semiconductor that manages data exchange between a host computer or processor and physical network interfaces. Within the product hierarchy, it is an Ethernet interface controller, a network interface IC, and a specialized interface device that sits between a PCI Express bus and external copper or fiber network links. Supporting two ports on one controller can reduce component count in dual-NIC systems, although the complete board-level connectivity still depends on PHY magnetics and connector implementation.

The BCM5715CKPBG provides the combination of PCI Express connectivity, dual-port operation, and Gigabit Ethernet throughput. Its dual-port architecture is suitable for gateways, servers, industrial controllers, and network appliances requiring redundant or segmented Ethernet connectivity. The controller designation identifies it as a Specialized interface IC rather than a general-purpose processor or conventional memory device.

The PBG suffix identifies the manufacturer's ordering and packaging configuration. Before schematic capture or PCB layout, engineers should verify the mechanical drawing, exposed-pad requirements, pin assignments, and recommended land pattern in the Broadcom datasheet. Those package-specific details must also be compared against the system power, Ethernet magnetics, reference-clock, and PCIe lane-routing requirements.

Typical uses include dual-port network server adapters, industrial Ethernet gateways, embedded communication controllers, and carrier-grade edge systems. A two-port design can support separate management and data traffic, link aggregation where the system and PHY implementation support it, or redundant links when appropriate switching and failover logic are present.

The principal design consideration is interface validation. Confirm the required PCIe generation and lane width, media-access-controller behavior, MAC/PHY partitioning, clocking, power domains, and interrupt architecture against the exact Broadcom documentation. Also validate magnetics and cable reach because controller capabilities alone do not determine the final Ethernet link performance.

This page organizes the BCM5715CKPBG's documented product identity, sourcing information, application guidance, comparison considerations, and design checks into one engineering-focused reference. It also distinguishes verified drop-in replacements from related interface controllers that cannot be assumed to be pin compatible.

Drop-in-Alternativen für BCM5715CKPBG – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

BCM5715CKPBG Grenzwerte & elektrische Eigenschaften

Product Type PCI Express dual-port Gigabit Ethernet controller
Manufacturer Broadcom Limited
Ethernet Port Count 2 ports
Nominal Ethernet Data Rate 1000 Mb/s per port
Host Interface PCI Express
Package Designation PBG ordering variant

BCM5715CKPBG pbg ordering variant Pinbelegungsleitfaden

Pinbelegung für BCM5715CKPBG (pbg ordering variant-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für BCM5715CKPBG im pbg ordering variant-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für BCM5715CKPBG.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

BCM5715CKPBG ist geeignet für 6 Anwendungs: Dual-NIC Server Adapter, Industrial Ethernet Gateway, Network Security Appliance, Embedded Communication Controller, Network Edge Appliance, Telecom Network Interface.

🖥️

Dual-NIC Server Adapter

The BCM5715CKPBG fits a dual-NIC server adapter because it combines a PCI Express host interface with two 1000 Mb/s Ethernet ports. This arrangement can provide separate data and management networks while using one controller package on the adapter card. The design should allocate the required PCIe lanes, reference clock, controller power rails, and magnics around the device, then validate the Broadcom-supported driver and operating-system path. Because the controller supports two network functions, system software may need to expose them as independent interfaces rather than a bonded pair.

🏭

Industrial Ethernet Gateway

The BCM5715CKPBG is suitable for an industrial Ethernet gateway when the appliance needs two 1000 Mb/s ports on a PCI Express host platform. One port may serve plant-floor traffic while the other supports management, uplinking, or equipment diagnostics. Industrial qualification still requires checking the exact temperature range, electromagnetic behavior, long-term availability, and operating-system support. Ethernet magnetics and surge-protection placement must be designed for the cable environment, while the controller’s PCIe interface and clocking must remain isolated from noisy external interfaces.

🔒

Network Security Appliance

The BCM5715CKPBG can support a network security appliance that needs two Gigabit Ethernet connections, such as separate trusted and untrusted network segments. Its dual-port architecture helps reduce the number of host-side network controller devices while retaining independent physical interfaces. Board design should confirm whether the two ports share a media-access controller or PHY implementation, because that determines filtering, bridging, failover, and driver configuration. Secure-appliance developers should also evaluate thermal dissipation, secure boot integration, and the availability of suitable security drivers.

🔧

Embedded Communication Controller

The BCM5715CKPBG fits embedded platforms requiring PCIe-hosted dual Gigabit Ethernet connectivity, particularly systems with a processor module and a custom carrier board. The design can connect local equipment and an upstream network through separate ports while centralizing network traffic in one controller. Engineers must confirm processor PCIe compatibility, device-tree or board-support requirements, interrupt routing, clock sourcing, and the exact PBG footprint. Thermal placement and copper-plane design are also important because sustained dual-port traffic can increase controller power dissipation.

🌐

Network Edge Appliance

The BCM5715CKPBG is applicable to a network edge appliance that bridges or monitors two Gigabit Ethernet networks through a PCIe host interface. Its dual-port arrangement can support routing, filtering, protocol conversion, or traffic analysis functions when suitable host software is available. A robust implementation requires separation of external magnics and connectors from the PCIe clock and power circuitry, along with controlled-impedance routing for high-speed signals. Review the package thermal data and Ethernet PHY arrangement to select appropriate copper hardware and passive cooling for the enclosure temperature.

📡

Telecom Network Interface

The BCM5715CKPBG may be used in telecom-oriented access equipment where two Gigabit Ethernet interfaces provide service and management connectivity over a PCIe host bus. The controller can simplify dual-interface line-card designs when the exact media architecture and thermal rating meet the application. Telecom deployments require careful review of temperature grade, reliability expectations, regulatory requirements, long-term supply, and electromagnetic compatibility at the board level. Use manufacturer reference material for PCIe lane routing, clock jitter, power sequencing, and the PBG package land pattern.

What is the BCM5715CKPBG?
The BCM5715CKPBG is a Broadcom PCI Express dual-port Gigabit Ethernet controller designed to connect a host system to two Gigabit Ethernet networks. Its two 1000 Mb/s ports consolidate network-interface functions in one specialized interface IC. The Broadcom product documentation identifies the device as a PCIe dual-port GBE controller, while the exact PBG package drawing and pin map should be confirmed in the manufacturer datasheet.
Where can I download the BCM5715CKPBG datasheet PDF?
The BCM5715CKPBG datasheet PDF is available through Broadcom's Ethernet connectivity product resources and authorized component-document listings. Use the manufacturer datasheet for the authoritative pin assignment, electrical limits, reference clock, power sequencing, and PBG land pattern. The Broadcom Ethernet connectivity page is the appropriate starting point, while distributor-hosted PDFs should be checked for document revision and part-number coverage before design use.
Where can I find the BCM5715CKPBG pinout?
The BCM5715CKPBG pinout is found in the manufacturer's PBG package pin-description table and mechanical drawing. Confirm every numbered signal, power rail, ground connection, exposed pad, and no-connect position against the exact datasheet revision. Do not infer the pin map from a similarly named BCM part because Ethernet PHY, controller, and lead-free ordering variants can use different PBG configurations.
What are the key specifications of BCM5715CKPBG that engineers should know?
The key documented specifications are dual-port Gigabit Ethernet, 1000 Mb/s nominal operation per port, and a PCI Express host interface. The BCM5715CKPBG is classified as a Specialized interface IC and uses Broadcom's PBG ordering designation. PCIe generation, lane width, power limits, pin count, clock requirements, operating temperature, and package dimensions must be taken from the exact manufacturer datasheet for the assembled board design.
Where can I buy BCM5715CKPBG online?
The BCM5715CKPBG can be requested through the Request a Quote form on this product page. The form is the appropriate route for current commercial availability, lot-dependent packaging details, and order quantities. Availability can change for specialized interface ICs, so engineers should submit the exact MPN and required quantity when requesting a quotation.
What is the price of BCM5715CKPBG?
Use the Request a Quote form on this page to request the current BCM5715CKPBG price for the required quantity and delivery program. Pricing for specialized Ethernet controller inventory can vary with quantity, date code, traceability, and packaging configuration. This page does not publish a static unit price that could become stale before the quote is placed.
What is the lead time for BCM5715CKPBG?
Request the current lead time using the Request a Quote form on this page and state the required order quantity. The manufacturer ordering code PBG identifies the required configuration, but a committed lead time depends on current component supply and the distributor's fulfillment schedule. Confirm the earliest delivery date, minimum order quantity, and permitted date-code range in the returned quotation.
Is BCM5715CKPBG in stock?
Request an availability confirmation through the Request a Quote form on this page. The verified listing page reports an orderable part, but that statement does not establish a live stock quantity for the requested quantity. For production planning, obtain current on-hand inventory, factory lead time, and allocation status in the quotation response.
What can replace BCM5715CKPBG?
A true replacement for BCM5715CKPBG must match the PBG footprint, pin assignments, PCIe interface requirements, dual-port Gigabit Ethernet functionality, clocking, and power behavior. No confirmed pin-to-pin replacement is identified in the available cross-reference information, so no MPN should be treated as a drop-in substitute without a manufacturer compatibility statement and a complete pin-by-pin review.
Is BCM5715CKPBG the same as BCM5715C?
BCM5715CKPBG and BCM5715C are related Broadcom Ethernet-controller orderable designations, but they are not automatically interchangeable. The PBG suffix may encode package, lead-free, or ordering differences, and the available material does not establish identical pinout or electrical characteristics. Treat BCM5715C as a related-family candidate only until its exact datasheet and package drawing prove drop-in compatibility.
What is the best Broadcom equivalent for BCM5715CKPBG?
BCM5715C is the closest named Broadcom-family candidate in the available technical results, but it is not a confirmed drop-in equivalent for BCM5715CKPBG. The deciding evidence must include identical PBG mechanical dimensions, pin-for-pin signal mapping, PCIe lane behavior, Ethernet PHY arrangement, clock requirements, and power sequencing. Without those matches, an engineering change or board redesign may be required.
BCM5715CKPBG vs BCM5720A0KFBG: which is better for a dual-network server?
BCM5715CKPBG is the documented choice for a PCI Express dual-port Gigabit Ethernet controller, while BCM5720A0KFBG belongs to the BCM5720 comparison family and may provide a different port, media, or host-interface configuration. Select BCM5715CKPBG when its dual Gigabit Ethernet PCIe architecture satisfies the system requirements. Review the BCM5720A0KFBG datasheet for features such as port count, media support, and package compatibility before treating it as an upgrade.
What is the difference between BCM5715CKPBG and TMDS351PAG?
BCM5715CKPBG is identified as a PCI Express dual-port Gigabit Ethernet controller, whereas TMDS351PAG is listed as a 64-pin TQFP specialized interface IC. Their device descriptions do not demonstrate identical functions or pin compatibility, and the available comparison data provides no shared-package proof. Choose TMDS351PAG only after its datasheet demonstrates the required Ethernet controller functionality and a footprint-compatible pin map.
When should I choose BCM5715CKPBG for a dual-network appliance?
Choose BCM5715CKPBG when the appliance needs one host-facing PCI Express connection and two 1000 Mb/s Ethernet ports, and the PBG package can be accommodated by the PCB. It is particularly relevant to gateways, embedded controllers, and network equipment requiring two ports without two separate controller devices. Confirm lane configuration, clocking, magnetics, thermal performance, and driver support before committing to the architecture.
Is BCM5715CKPBG suitable for industrial and embedded networking?
BCM5715CKPBG is suitable in principle for industrial or embedded dual-Ethernet designs when its electrical, temperature, lifecycle, and environmental requirements are acceptable. The available product identity confirms the PCI Express dual-port Gigabit Ethernet function, but it does not establish an industrial temperature grade or AEC-Q100 status. Verify the exact ordering variant, temperature range, endurance requirements, and long-term availability in the manufacturer documentation.

Technische Referenzdaten für BCM5715CKPBG – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose BCM5715CKPBG when the host system uses PCI Express and requires two Gigabit Ethernet ports in one controller. It is a practical fit for dual-NIC server adapters, industrial gateways, embedded communication platforms, and network appliances that benefit from consolidated Ethernet connectivity. BCM5720A0KFBG may be relevant when its broader BCM5720-family functions better match media, port-count, or performance requirements, but it is not a confirmed drop-in replacement. TMDS351PAG and ADN8102ACPZ are specialized interface controllers in different package families and therefore require a functional redesign unless their complete datasheets prove otherwise. Before releasing hardware, verify PCIe lane configuration, clocking, driver support, Ethernet magnics, thermal performance, package mechanics, and exact PBG pin assignments.

Vergleich mit Alternativen

Parameter Dieses Produkt BCM5720A0KFBG TMDS351PAG ADN8102ACPZ
Brand Broadcom Broadcom Texas Instruments Analog Devices
Drop-In Status Target device Not established Not a confirmed drop-in replacement Not a confirmed drop-in replacement

Wichtigste Unterscheidungsmerkmale

  • Integrated dual-port Gigabit Ethernet (vs. TMDS351PAG)
  • PCI Express host connectivity (vs. ADN8102ACPZ)
  • Single-controller dual-network architecture (vs. BCM5720A0KFBG)

Designhinweise

Route the PCI Express interface as a controlled-impedance differential pair set and follow the Broadcom reference layout for lane spacing, via transitions, and return paths. Place the controller’s prescribed input, output, and bypass capacitors directly at their designated pins. Keep the reference-clock distribution away from Ethernet magnics and connector transient regions because clock jitter can affect PCIe operation even when the Ethernet links themselves are electrically compliant.

Follow the manufacturer power-decoupling and sequencing requirements exactly, including capacitor voltage ratings and placement. Provide adequate copper around exposed thermal features if the PBG package uses them. Estimate total dissipation from the selected operating mode and the largest expected data rate rather than assuming the idle power applies continuously. Verify that every rail has adequate startup, steady-state, and transient headroom for dual-port traffic.

Do not treat a related BCM Ethernet controller as a drop-in replacement merely because it has two ports or a related package code. Check the mechanical drawing, every pin name, exposed-pad connection, PCIe lane width, clock requirement, PHY-versus-MAC architecture, power sequence, and driver identity. Also confirm that the Ethernet magnetics selected for each port match the Broadcom reference design; a controller-level substitution can still create link instability when cable and magnetics specifications differ.

Plan the Ethernet connector and magnetics as a controlled interface section with a defined return-current path to the board ground structure. Keep high-current switching supplies and high-speed clocks away from the magnetics input side, and follow the reference-layout spacing for copper and components around Ethernet pairs. Validate conducted and radiated emissions on the final assembly because connector transitions, cable shields, and chassis grounding often dominate system-level EMI performance.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The PBG ordering suffix is not sufficient by itself to establish lead-free or halogen-free status. Compliance should be confirmed from Broadcom's material declaration or exact product-page compliance information.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

BCM5715CKPBG datasheet BCM5715CKPBG pinout BCM5715CKPBG datasheet pdf BCM5715CKPBG specifications Broadcom BCM5715CKPBG BCM5715CKPBG dual port GBE BCM5715CKPBG PCIe controller BCM5715CKPBG PBG package BCM5715CKPBG dual NIC server BCM5715CKPBG industrial gateway BCM5715CKPBG vs BCM5720A0KFBG BCM5715CKPBG equivalent BCM5715CKPBG replacement BCM5715CKPBG price BCM5715CKPBG stock

Verwandte Bauteile & Begriffe

Broadcom BCM5715CKPBG BCM5715C BCM5720A0KFBG TMDS351PAG ADN8102ACPZ PCI Express Gigabit Ethernet dual-port Ethernet controller network interface controller Ethernet interface IC specialized interface IC 1000 Mb/s PBG package surface-mount semiconductor PCIe host interface Ethernet magnetics reference clock SGMI server network adapter industrial Ethernet gateway network security appliance embedded communication controller network edge appliance telecom network interface
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen