BCM5715CKPBG - Dual-Port PCIe GBE Controller | Broadcom
MPN: BCM5715CKPBG ✗ اختتامِ زندگیBCM5715CKPBG جائزہ
A Gigabit Ethernet controller is a semiconductor that manages data exchange between a host computer or processor and physical network interfaces. Within the product hierarchy, it is an Ethernet interface controller, a network interface IC, and a specialized interface device that sits between a PCI Express bus and external copper or fiber network links. Supporting two ports on one controller can reduce component count in dual-NIC systems, although the complete board-level connectivity still depends on PHY magnetics and connector implementation.
The BCM5715CKPBG provides the combination of PCI Express connectivity, dual-port operation, and Gigabit Ethernet throughput. Its dual-port architecture is suitable for gateways, servers, industrial controllers, and network appliances requiring redundant or segmented Ethernet connectivity. The controller designation identifies it as a Specialized interface IC rather than a general-purpose processor or conventional memory device.
The PBG suffix identifies the manufacturer's ordering and packaging configuration. Before schematic capture or PCB layout, engineers should verify the mechanical drawing, exposed-pad requirements, pin assignments, and recommended land pattern in the Broadcom datasheet. Those package-specific details must also be compared against the system power, Ethernet magnetics, reference-clock, and PCIe lane-routing requirements.
Typical uses include dual-port network server adapters, industrial Ethernet gateways, embedded communication controllers, and carrier-grade edge systems. A two-port design can support separate management and data traffic, link aggregation where the system and PHY implementation support it, or redundant links when appropriate switching and failover logic are present.
The principal design consideration is interface validation. Confirm the required PCIe generation and lane width, media-access-controller behavior, MAC/PHY partitioning, clocking, power domains, and interrupt architecture against the exact Broadcom documentation. Also validate magnetics and cable reach because controller capabilities alone do not determine the final Ethernet link performance.
This page organizes the BCM5715CKPBG's documented product identity, sourcing information, application guidance, comparison considerations, and design checks into one engineering-focused reference. It also distinguishes verified drop-in replacements from related interface controllers that cannot be assumed to be pin compatible.
کے لیے ڈراپ اِن متبادل BCM5715CKPBG — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔
متبادل کی درخواست کریںBCM5715CKPBG زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات
| Product Type | PCI Express dual-port Gigabit Ethernet controller |
| Manufacturer | Broadcom Limited |
| Ethernet Port Count | 2 ports |
| Nominal Ethernet Data Rate | 1000 Mb/s per port |
| Host Interface | PCI Express |
| Package Designation | PBG ordering variant |
BCM5715CKPBG pbg ordering variant پن کنفیگریشن گائیڈ
BCM5715CKPBG (pbg ordering variant پیکیج) کے لیے پن کنفیگریشن۔ اس اینالاگ کمپوننٹ میں اِن پٹ، آؤٹ پٹ اور پاور سپلائی پنز شامل ہیں۔ آفسیٹ نل، کمپنسیشن اور اِن ایبل پن کنفیگریشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ سگنل کنڈیشننگ اور ایمپلیفائر سرکٹس کے لیے مثالی۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں BCM5715CKPBG.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
BCM5715CKPBG کے لیے موزوں ہے 6 ایپلیکیشنs: Dual-NIC Server Adapter, Industrial Ethernet Gateway, Network Security Appliance, Embedded Communication Controller, Network Edge Appliance, Telecom Network Interface.
Dual-NIC Server Adapter
The BCM5715CKPBG fits a dual-NIC server adapter because it combines a PCI Express host interface with two 1000 Mb/s Ethernet ports. This arrangement can provide separate data and management networks while using one controller package on the adapter card. The design should allocate the required PCIe lanes, reference clock, controller power rails, and magnics around the device, then validate the Broadcom-supported driver and operating-system path. Because the controller supports two network functions, system software may need to expose them as independent interfaces rather than a bonded pair.
تجویز کردہ
Industrial Ethernet Gateway
The BCM5715CKPBG is suitable for an industrial Ethernet gateway when the appliance needs two 1000 Mb/s ports on a PCI Express host platform. One port may serve plant-floor traffic while the other supports management, uplinking, or equipment diagnostics. Industrial qualification still requires checking the exact temperature range, electromagnetic behavior, long-term availability, and operating-system support. Ethernet magnetics and surge-protection placement must be designed for the cable environment, while the controller’s PCIe interface and clocking must remain isolated from noisy external interfaces.
تجویز کردہ
Network Security Appliance
The BCM5715CKPBG can support a network security appliance that needs two Gigabit Ethernet connections, such as separate trusted and untrusted network segments. Its dual-port architecture helps reduce the number of host-side network controller devices while retaining independent physical interfaces. Board design should confirm whether the two ports share a media-access controller or PHY implementation, because that determines filtering, bridging, failover, and driver configuration. Secure-appliance developers should also evaluate thermal dissipation, secure boot integration, and the availability of suitable security drivers.
تجویز کردہ
Embedded Communication Controller
The BCM5715CKPBG fits embedded platforms requiring PCIe-hosted dual Gigabit Ethernet connectivity, particularly systems with a processor module and a custom carrier board. The design can connect local equipment and an upstream network through separate ports while centralizing network traffic in one controller. Engineers must confirm processor PCIe compatibility, device-tree or board-support requirements, interrupt routing, clock sourcing, and the exact PBG footprint. Thermal placement and copper-plane design are also important because sustained dual-port traffic can increase controller power dissipation.
تجویز کردہ
Network Edge Appliance
The BCM5715CKPBG is applicable to a network edge appliance that bridges or monitors two Gigabit Ethernet networks through a PCIe host interface. Its dual-port arrangement can support routing, filtering, protocol conversion, or traffic analysis functions when suitable host software is available. A robust implementation requires separation of external magnics and connectors from the PCIe clock and power circuitry, along with controlled-impedance routing for high-speed signals. Review the package thermal data and Ethernet PHY arrangement to select appropriate copper hardware and passive cooling for the enclosure temperature.
تجویز کردہ
Telecom Network Interface
The BCM5715CKPBG may be used in telecom-oriented access equipment where two Gigabit Ethernet interfaces provide service and management connectivity over a PCIe host bus. The controller can simplify dual-interface line-card designs when the exact media architecture and thermal rating meet the application. Telecom deployments require careful review of temperature grade, reliability expectations, regulatory requirements, long-term supply, and electromagnetic compatibility at the board level. Use manufacturer reference material for PCIe lane routing, clock jitter, power sequencing, and the PBG package land pattern.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا BCM5715CKPBG — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | BCM5720A0KFBG | TMDS351PAG | ADN8102ACPZ |
|---|---|---|---|---|
| Brand | Broadcom | Broadcom | Texas Instruments | Analog Devices |
| Drop-In Status | Target device | Not established | Not a confirmed drop-in replacement | Not a confirmed drop-in replacement |
اہم امتیازی خصوصیات
- Integrated dual-port Gigabit Ethernet (بمقابلہTMDS351PAG)
- PCI Express host connectivity (بمقابلہADN8102ACPZ)
- Single-controller dual-network architecture (بمقابلہBCM5720A0KFBG)
ڈیزائن نوٹس
Route the PCI Express interface as a controlled-impedance differential pair set and follow the Broadcom reference layout for lane spacing, via transitions, and return paths. Place the controller’s prescribed input, output, and bypass capacitors directly at their designated pins. Keep the reference-clock distribution away from Ethernet magnics and connector transient regions because clock jitter can affect PCIe operation even when the Ethernet links themselves are electrically compliant.
Follow the manufacturer power-decoupling and sequencing requirements exactly, including capacitor voltage ratings and placement. Provide adequate copper around exposed thermal features if the PBG package uses them. Estimate total dissipation from the selected operating mode and the largest expected data rate rather than assuming the idle power applies continuously. Verify that every rail has adequate startup, steady-state, and transient headroom for dual-port traffic.
Do not treat a related BCM Ethernet controller as a drop-in replacement merely because it has two ports or a related package code. Check the mechanical drawing, every pin name, exposed-pad connection, PCIe lane width, clock requirement, PHY-versus-MAC architecture, power sequence, and driver identity. Also confirm that the Ethernet magnetics selected for each port match the Broadcom reference design; a controller-level substitution can still create link instability when cable and magnetics specifications differ.
Plan the Ethernet connector and magnetics as a controlled interface section with a defined return-current path to the board ground structure. Keep high-current switching supplies and high-speed clocks away from the magnetics input side, and follow the reference-layout spacing for copper and components around Ethernet pairs. Validate conducted and radiated emissions on the final assembly because connector transitions, cable shields, and chassis grounding often dominate system-level EMI performance.
تعمیل کی معلومات
The PBG ordering suffix is not sufficient by itself to establish lead-free or halogen-free status. Compliance should be confirmed from Broadcom's material declaration or exact product-page compliance information.