C8051F021-GQ - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
Teilenummer: C8051F021-GQ ✓ AktivC8051F021-GQ Übersicht
A mixed-signal microcontroller is an embedded controller that combines digital processing with analog conversion and comparison functions. The C8051F021 belongs to the C8051 family and integrates an 8-bit CPU, nonvolatile program memory, volatile data memory, ADC channels, DAC outputs, comparators, timers, and communication interfaces into one device. This integration can reduce external component count in compact control and instrumentation designs while keeping analog measurements and control loops close to the CPU.
Principal features include a 25 MHz maximum operating frequency, 64 KB of ISP Flash, and 4.25 KB of on-chip RAM. The analog subsystem includes a 12-bit, eight-channel ADC capable of 100 ksps, a 12-bit, two-channel DAC, and two comparators. Five 16-bit timers support precise timing, waveform generation, and periodic control tasks. A second ADC subsystem is identified as 8-bit with a maximum rate of 500 ksps, providing a high-speed sampling path for applications that do not require 12-bit resolution.
The device uses the C8051-compatible CIP-51 core and is described as a high-speed pipelined 8-bit architecture. Its hardware peripherals execute ADC sampling, DAC output, comparisons, and timer functions independently of software instruction execution, allowing the main core to handle control logic and communications concurrently. The 64-lead TQFP outline is larger than contemporary low-pin-count packages but exposes a broad set of mixed-signal I/O and peripheral connections.
Typical uses include multichannel sensor acquisition, industrial process monitoring, laboratory measurement equipment, and embedded control panels. The 100 ksps 12-bit ADC supports general-purpose analog measurements, while the 500 ksps 8-bit ADC can serve higher-speed sampling tasks. The two comparators are useful for threshold detection, and the DAC permits analog output generation without a separate converter.
PCB design should account for analog and digital return paths, provide clean supply decoupling at the device pins, and route high-speed or sensitive analog signals away from switching nodes. Use the manufacturer pin-description table and connection guidance when assigning every TQFP-64 lead and analog reference connection. Confirm operating voltage, programming interface details, clock requirements, and unused-pin termination in the manufacturer datasheet before final schematic release.
This page consolidates the C8051F021-GQ device specifications, verified drop-in replacement information, package details, and application-specific engineering guidance into a single selection reference. It also identifies the limits of currently documented alternatives so engineers can distinguish exact replacement paths from merely similar mixed-signal microcontrollers.
Drop-in-Alternativen für C8051F021-GQ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit C8051F021-GQ (gleiche Bauform und Footprint) – abweichend in Package, Flash Memory, ADC Resolution, Comparator Count, DAC Resolution.
CLM8051F021-GQ
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
C8051F020-GQ
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →C8051F021-GQ Grenzwerte & elektrische Eigenschaften
| Microcontroller Type | Mixed-signal 8-bit microcontroller (MCU) |
| CPU Core | 8051-compatible CIP-51 core |
| Maximum CPU Frequency | 25 MHz |
| Flash Memory | 64 KB in-system programmable Flash |
| Flash Organization | 64K x 8 bits |
| On-Chip RAM | 4.25 KB (4352 bytes: 4096 + 256 bytes) |
| Primary ADC Resolution | 12 bits |
| Primary ADC Channels | 8 channels |
| Primary ADC Sampling Rate | 100 ksps |
| Secondary ADC Resolution | 8 bits |
| Secondary ADC Sampling Rate | 500 ksps |
| DAC Resolution | 12 bits |
| DAC Channels | 2 channels |
| Comparator Count | 2 comparators |
| Timer Count | 5 x 16-bit timers |
| Gehäuse | 64-pin TQFP, 10 x 10 mm |
| Montageart | Surface mount |
| Programmable Memory Type | ISP Flash |
| Architecture | High-speed pipelined 8-bit architecture |
C8051F021-GQ 64-pin tqfp, 10 x 10 mm Pinbelegungsleitfaden
Pinbelegung für C8051F021-GQ (64-pin tqfp, 10 x 10 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für C8051F021-GQ.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
C8051F021-GQ ist geeignet für 6 Anwendungs: Multichannel Industrial Sensor Acquisition, Precision Process Control, Laboratory Measurement Equipment, Embedded Data Logger, Threshold Monitoring and Safety Control, Analog Signal Generation and Test.
Multichannel Industrial Sensor Acquisition
The C8051F021-GQ fits multichannel sensor acquisition because its primary ADC provides eight 12-bit inputs at up to 100 ksps while the 25 MHz core performs filtering, calibration, and control calculations. Eight analog inputs can monitor temperature, pressure, level, or process-voltage channels without requiring a separate multiplexer and converter. The separate 8-bit, 500 ksps ADC path can capture faster events, while five 16-bit timers organize sampling intervals. Design the analog front end around the device input limits and reference requirements, and separate sensitive sensor returns from digital switching paths to preserve measurement quality.
Empfohlen
Precision Process Control
The C8051F021-GQ supports closed-loop process control by combining an 8-bit core with a 12-bit ADC, two comparators, and five 16-bit timers. Comparators can detect setpoints or fault thresholds independently of the main polling loop, while timers provide repeatable control and sampling periods. The two 12-bit DAC channels can represent command or actuator-control values. Compared with a discrete analog controller, the integrated MCU simplifies signal coordination, yet firmware must define filtering, scaling, fault handling, and safe output states during startup or fault conditions.
Empfohlen
Laboratory Measurement Equipment
The C8051F021-GQ is appropriate for compact laboratory instruments that combine waveform acquisition with local control and display processing. Its 12-bit ADC at 100 ksps supports general measurement accuracy, while the 8-bit ADC at 500 ksps offers a faster sampling route for monitoring or trigger-related tasks. The five 16-bit timers can divide the system clock for acquisition timing and control intervals, and the 64 KB Flash accommodates instrument firmware and calibration constants. Use careful grounding, guarded analog routing, and calibrated references to prevent PCB leakage and layout-related errors from dominating the measurement chain.
Empfohlen
Embedded Data Logger
A compact data logger can use the C8051F021-GQ to acquire sensor values, apply local processing, and coordinate storage or external communications. The 25 MHz CPU is suitable for filtering and preprocessing before data is transferred, while 64 KB of ISP Flash supports firmware updates and 4.25 KB of RAM provides working space for buffers. The eight-channel 12-bit ADC supports multiple environmental or equipment inputs, and the DAC channels can provide calibration or test stimuli. Plan memory endurance, write-cycle behavior, data retention, and communication timing in the application firmware rather than relying only on raw acquisition throughput.
Empfohlen
Threshold Monitoring and Safety Control
The two integrated comparators make the C8051F021-GQ useful for independent threshold monitoring of voltage, current, temperature-derived signals, or other analog conditions. A comparator can indicate when an input crosses a programmed limit while the 25 MHz core handles configuration, status reporting, and higher-level control. The 12-bit ADC complements comparator use when more detailed measurements are required, and five 16-bit timers can coordinate sampling or watchdog-like timing. For safety-critical behavior, keep deterministic hardware response paths separate from non-real-time software tasks and confirm all electrical limits in the manufacturer documentation.
Empfohlen
Analog Signal Generation and Test
The C8051F021-GQ can generate controlled analog test signals through its 12-bit, two-channel DAC while simultaneously sampling feedback or stimulus responses through the ADC. This combination is useful for equipment calibration, actuator simulation, loop testing, and automated test fixtures. The two DAC channels allow two coordinated outputs, while the 100 ksps ADC supports feedback measurements and the faster 8-bit ADC can observe rapidly changing events. Accurate results depend on stable reference design, output buffering, reconstruction filtering, and software correction for analog-path error.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für C8051F021-GQ – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CLM8051F021-GQ | C8051F020-GQ |
|---|---|---|---|
| Brand | Silicon Labs | CHIPLON | Silicon Labs |
| Package | 64-pin TQFP, 10 x 10 mm | TQFP-64 | 64-pin TQFP |
Wichtigste Unterscheidungsmerkmale
- Higher-resolution primary ADC than the 8-bit fast conversion path (vs. C8051F020-GQ)
- Integrated dual-channel DAC and dual comparators (vs. C8051F020-GQ)
- Exact-base-device cross-brand replacement path (vs. CLM8051F021-GQ)
Designhinweise
Separate analog and digital return currents and keep the analog input network away from digital clock and switching-node traces. Place the ADC input protection, filtering, and reference components near the associated device pins, and use a continuous ground plane with carefully controlled analog and digital partitioning. Because the complete TQFP-64 lead map is not reproduced on this page, assign every net from the manufacturer pin-description table rather than inferring analog or power pins from package position alone.
Verify supply voltage, absolute maximum ratings, current limits, decoupling requirements, and analog-reference connections in the manufacturer datasheet before releasing the schematic. Place required bypass capacitors close to their intended power pins and provide a low-impedance return path. The mixed-signal architecture may combine digital switching with sensitive analog conversion, so adequate local decoupling and reference filtering are important even when the CPU itself operates from a relatively clean supply.
Use the 12-bit, 100 ksps ADC for precision-oriented measurements and the 8-bit, 500 ksps ADC for faster sampling where its reduced resolution is acceptable. Avoid treating the faster path as a transparent substitute for the 12-bit path because its resolution, noise behavior, and acquisition characteristics differ. Validate channel bandwidth, source impedance, acquisition time, and anti-aliasing requirements in the electrical design and with representative signals on the assembled board.
Do not substitute the base C8051F021 name, a reel-packaging suffix, or a same-family MCU without checking the exact lead functions, memory configuration, peripheral map, clock limits, and programming interface. A matching 64-pin outline is necessary but insufficient for a true drop-in decision. Review errata, programming guidance, reset requirements, and unused-pin instructions, then revalidate firmware and analog calibration after any substitution.
Compliance-Informationen
Compliance declarations for the exact C8051F021-GQ ordering code were not included in the retrieved product information. The device is not presented as an AEC-Q100-qualified automotive part; confirm automotive qualification separately if required.