C8051F021-GQ - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
MPN: C8051F021-GQ ✓ 啟用中C8051F021-GQ 概覽
A mixed-signal microcontroller is an embedded controller that combines digital processing with analog conversion and comparison functions. The C8051F021 belongs to the C8051 family and integrates an 8-bit CPU, nonvolatile program memory, volatile data memory, ADC channels, DAC outputs, comparators, timers, and communication interfaces into one device. This integration can reduce external component count in compact control and instrumentation designs while keeping analog measurements and control loops close to the CPU.
Principal features include a 25 MHz maximum operating frequency, 64 KB of ISP Flash, and 4.25 KB of on-chip RAM. The analog subsystem includes a 12-bit, eight-channel ADC capable of 100 ksps, a 12-bit, two-channel DAC, and two comparators. Five 16-bit timers support precise timing, waveform generation, and periodic control tasks. A second ADC subsystem is identified as 8-bit with a maximum rate of 500 ksps, providing a high-speed sampling path for applications that do not require 12-bit resolution.
The device uses the C8051-compatible CIP-51 core and is described as a high-speed pipelined 8-bit architecture. Its hardware peripherals execute ADC sampling, DAC output, comparisons, and timer functions independently of software instruction execution, allowing the main core to handle control logic and communications concurrently. The 64-lead TQFP outline is larger than contemporary low-pin-count packages but exposes a broad set of mixed-signal I/O and peripheral connections.
Typical uses include multichannel sensor acquisition, industrial process monitoring, laboratory measurement equipment, and embedded control panels. The 100 ksps 12-bit ADC supports general-purpose analog measurements, while the 500 ksps 8-bit ADC can serve higher-speed sampling tasks. The two comparators are useful for threshold detection, and the DAC permits analog output generation without a separate converter.
PCB design should account for analog and digital return paths, provide clean supply decoupling at the device pins, and route high-speed or sensitive analog signals away from switching nodes. Use the manufacturer pin-description table and connection guidance when assigning every TQFP-64 lead and analog reference connection. Confirm operating voltage, programming interface details, clock requirements, and unused-pin termination in the manufacturer datasheet before final schematic release.
This page consolidates the C8051F021-GQ device specifications, verified drop-in replacement information, package details, and application-specific engineering guidance into a single selection reference. It also identifies the limits of currently documented alternatives so engineers can distinguish exact replacement paths from merely similar mixed-signal microcontrollers.
直接替換替代品,適用於 C8051F021-GQ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: C8051F021-GQ (相同外形與佔位) — 差異在於 Package, Flash Memory, ADC Resolution, Comparator Count, DAC Resolution.
CLM8051F021-GQ
✅ 直接替換📋 參考替代品(不在目錄中)
C8051F020-GQ
✅ 直接替換聯絡詢價
查看資料表 →C8051F021-GQ 最大額定值與電氣特性
| Microcontroller Type | Mixed-signal 8-bit microcontroller (MCU) |
| CPU Core | 8051-compatible CIP-51 core |
| Maximum CPU Frequency | 25 MHz |
| Flash Memory | 64 KB in-system programmable Flash |
| Flash Organization | 64K x 8 bits |
| On-Chip RAM | 4.25 KB (4352 bytes: 4096 + 256 bytes) |
| Primary ADC Resolution | 12 bits |
| Primary ADC Channels | 8 channels |
| Primary ADC Sampling Rate | 100 ksps |
| Secondary ADC Resolution | 8 bits |
| Secondary ADC Sampling Rate | 500 ksps |
| DAC Resolution | 12 bits |
| DAC Channels | 2 channels |
| Comparator Count | 2 comparators |
| Timer Count | 5 x 16-bit timers |
| 封裝 | 64-pin TQFP, 10 x 10 mm |
| 安裝類型 | Surface mount |
| Programmable Memory Type | ISP Flash |
| Architecture | High-speed pipelined 8-bit architecture |
C8051F021-GQ 64-pin tqfp, 10 x 10 mm 腳位配置指南
C8051F021-GQ(64-pin tqfp, 10 x 10 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: C8051F021-GQ.
請參閱 資料表 以查看完整腳位配置。
典型應用
C8051F021-GQ 適用於 6 應用s: Multichannel Industrial Sensor Acquisition, Precision Process Control, Laboratory Measurement Equipment, Embedded Data Logger, Threshold Monitoring and Safety Control, Analog Signal Generation and Test.
Multichannel Industrial Sensor Acquisition
The C8051F021-GQ fits multichannel sensor acquisition because its primary ADC provides eight 12-bit inputs at up to 100 ksps while the 25 MHz core performs filtering, calibration, and control calculations. Eight analog inputs can monitor temperature, pressure, level, or process-voltage channels without requiring a separate multiplexer and converter. The separate 8-bit, 500 ksps ADC path can capture faster events, while five 16-bit timers organize sampling intervals. Design the analog front end around the device input limits and reference requirements, and separate sensitive sensor returns from digital switching paths to preserve measurement quality.
推薦
Precision Process Control
The C8051F021-GQ supports closed-loop process control by combining an 8-bit core with a 12-bit ADC, two comparators, and five 16-bit timers. Comparators can detect setpoints or fault thresholds independently of the main polling loop, while timers provide repeatable control and sampling periods. The two 12-bit DAC channels can represent command or actuator-control values. Compared with a discrete analog controller, the integrated MCU simplifies signal coordination, yet firmware must define filtering, scaling, fault handling, and safe output states during startup or fault conditions.
推薦
Laboratory Measurement Equipment
The C8051F021-GQ is appropriate for compact laboratory instruments that combine waveform acquisition with local control and display processing. Its 12-bit ADC at 100 ksps supports general measurement accuracy, while the 8-bit ADC at 500 ksps offers a faster sampling route for monitoring or trigger-related tasks. The five 16-bit timers can divide the system clock for acquisition timing and control intervals, and the 64 KB Flash accommodates instrument firmware and calibration constants. Use careful grounding, guarded analog routing, and calibrated references to prevent PCB leakage and layout-related errors from dominating the measurement chain.
推薦
Embedded Data Logger
A compact data logger can use the C8051F021-GQ to acquire sensor values, apply local processing, and coordinate storage or external communications. The 25 MHz CPU is suitable for filtering and preprocessing before data is transferred, while 64 KB of ISP Flash supports firmware updates and 4.25 KB of RAM provides working space for buffers. The eight-channel 12-bit ADC supports multiple environmental or equipment inputs, and the DAC channels can provide calibration or test stimuli. Plan memory endurance, write-cycle behavior, data retention, and communication timing in the application firmware rather than relying only on raw acquisition throughput.
推薦
Threshold Monitoring and Safety Control
The two integrated comparators make the C8051F021-GQ useful for independent threshold monitoring of voltage, current, temperature-derived signals, or other analog conditions. A comparator can indicate when an input crosses a programmed limit while the 25 MHz core handles configuration, status reporting, and higher-level control. The 12-bit ADC complements comparator use when more detailed measurements are required, and five 16-bit timers can coordinate sampling or watchdog-like timing. For safety-critical behavior, keep deterministic hardware response paths separate from non-real-time software tasks and confirm all electrical limits in the manufacturer documentation.
推薦
Analog Signal Generation and Test
The C8051F021-GQ can generate controlled analog test signals through its 12-bit, two-channel DAC while simultaneously sampling feedback or stimulus responses through the ADC. This combination is useful for equipment calibration, actuator simulation, loop testing, and automated test fixtures. The two DAC channels allow two coordinated outputs, while the 100 ksps ADC supports feedback measurements and the faster 8-bit ADC can observe rapidly changing events. Accurate results depend on stable reference design, output buffering, reconstruction filtering, and software correction for analog-path error.
推薦
推薦產品摘要
工程參考資料,適用於 C8051F021-GQ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | CLM8051F021-GQ | C8051F020-GQ |
|---|---|---|---|
| Brand | Silicon Labs | CHIPLON | Silicon Labs |
| Package | 64-pin TQFP, 10 x 10 mm | TQFP-64 | 64-pin TQFP |
主要差異化特點
- Higher-resolution primary ADC than the 8-bit fast conversion path (對比C8051F020-GQ)
- Integrated dual-channel DAC and dual comparators (對比C8051F020-GQ)
- Exact-base-device cross-brand replacement path (對比CLM8051F021-GQ)
設計說明
Separate analog and digital return currents and keep the analog input network away from digital clock and switching-node traces. Place the ADC input protection, filtering, and reference components near the associated device pins, and use a continuous ground plane with carefully controlled analog and digital partitioning. Because the complete TQFP-64 lead map is not reproduced on this page, assign every net from the manufacturer pin-description table rather than inferring analog or power pins from package position alone.
Verify supply voltage, absolute maximum ratings, current limits, decoupling requirements, and analog-reference connections in the manufacturer datasheet before releasing the schematic. Place required bypass capacitors close to their intended power pins and provide a low-impedance return path. The mixed-signal architecture may combine digital switching with sensitive analog conversion, so adequate local decoupling and reference filtering are important even when the CPU itself operates from a relatively clean supply.
Use the 12-bit, 100 ksps ADC for precision-oriented measurements and the 8-bit, 500 ksps ADC for faster sampling where its reduced resolution is acceptable. Avoid treating the faster path as a transparent substitute for the 12-bit path because its resolution, noise behavior, and acquisition characteristics differ. Validate channel bandwidth, source impedance, acquisition time, and anti-aliasing requirements in the electrical design and with representative signals on the assembled board.
Do not substitute the base C8051F021 name, a reel-packaging suffix, or a same-family MCU without checking the exact lead functions, memory configuration, peripheral map, clock limits, and programming interface. A matching 64-pin outline is necessary but insufficient for a true drop-in decision. Review errata, programming guidance, reset requirements, and unused-pin instructions, then revalidate firmware and analog calibration after any substitution.
合規資訊
Compliance declarations for the exact C8051F021-GQ ordering code were not included in the retrieved product information. The device is not presented as an AEC-Q100-qualified automotive part; confirm automotive qualification separately if required.