C8051F560-IQ - 50MHz 32KB Automotive 8051 MCU | Silicon Labs
Teilenummer: C8051F560-IQ ✓ AktivC8051F560-IQ Übersicht
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The C8051F560-IQ belongs to the 8051 family and the C8051F56x series, combining embedded flash memory, mixed-signal peripherals, serial communications, and automotive qualification in a surface-mount package. It is intended for systems that need deterministic 8-bit control with integrated communication and analog measurement.
Key features include a 50 MHz clock, 32 KB of flash, 2.25 KB of RAM, CAN and LIN interfaces, and mixed-signal acquisition capability. The manufacturer documentation identifies operation to 200 ksps, up to 32 external single-ended inputs, and selectable internal or external voltage-reference options. Its 1.8 V to 5.25 V supply range supports industrial, automotive, and embedded control environments operating from low-voltage rails through traditional 5 V systems.
The C8051F56x architecture supports an integrated 8051-compatible processing core with dedicated communications and mixed-signal resources. Flash program memory permits field reprogramming and in-system configuration, while RAM supports protocol stacks, control state, and data acquisition. The automotive-qualified variant adds extended temperature capability for engine-adjacent, vehicle-network, and industrial controller applications where ambient conditions exceed consumer-temperature limits.
Typical uses include CAN and LIN vehicle-network nodes, motor and actuator controllers, industrial sensing nodes, building-control interfaces, and embedded data-acquisition systems. Its communications peripherals allow the device to participate in distributed networks without requiring a separate protocol controller, while the analog resources can reduce the number of external components in monitoring designs.
Designers should verify clock, pin, and peripheral assignments against the manufacturer pinout and ordering tables before PCB release. Place decoupling capacitors close to the supply pins, route high-speed and communications signals away from noisy analog inputs, and confirm that the selected operating voltage, temperature range, oscillator configuration, and programming method match the complete system requirements.
This product summary consolidates the C8051F560-IQ identity, electrical characteristics, package information, qualification details, and replacement considerations into a single engineering reference, while the manufacturer datasheet remains the controlling document for final design validation.
Drop-in-Alternativen für C8051F560-IQ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit C8051F560-IQ (gleiche Bauform und Footprint) – abweichend in Package, Flash Program Memory, Processor Core, RAM, Series.
C8051F565-IQ
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
C8051F503-IQ
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →C8051F506-IQ
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
C8051F560-IQ Grenzwerte & elektrische Eigenschaften
| Microcontroller Family | C8051F56x |
| Processor Core | 8051 8-bit |
| Maximale Taktfrequenz | 50 MHz |
| Maximum CPU Throughput | 50 MIPS |
| Flash Program Memory | 32 KB |
| RAM | 2.25 KB |
| Supply Voltage Range | 1.8 V to 5.25 V |
| Nominal Supply Voltages | 2.5 V, 3.3 V, 5 V |
| ADC Conversion Rate | Up to 200 ksps |
| External Single-Ended Inputs | Up to 32 |
| Communications Interfaces | CAN 2.0 and LIN 2.1 |
| Gehäuse | 32-QFP, 7 x 7 mm |
| Montageart | Surface mount |
| Automotive Qualification | AEC-Q100 |
| Maximum Operating Temperature | 125 °C |
| Reference Options | Internal VREF, external pin, or VDD |
| RoHS-Status | Compliant |
| Lead-Free Status | Lead-free |
C8051F560-IQ 32-qfp, 7 x 7 mm Pinbelegungsleitfaden
Pinbelegung für C8051F560-IQ (32-qfp, 7 x 7 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für C8051F560-IQ.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
C8051F560-IQ ist geeignet für 6 Anwendungs: Automotive CAN Network Nodes, Industrial Sensor and Actuator Control, LIN Automotive Sub-Networks, Embedded Data Acquisition, Building and Facility Control, Motor and Actuator Controllers.
Automotive CAN Network Nodes
The C8051F560-IQ fits vehicle CAN nodes that require local control, communication, and mixed-signal measurement. Its 50 MHz 8-bit core executes protocol and control tasks, while 32 KB of flash provides room for application code and update logic. CAN 2.0 and LIN 2.1 support allows the same controller family to participate in hierarchical vehicle networks. AEC-Q100 qualification and operation to 125 °C strengthen its suitability for automotive environments. Designers should isolate communication lines appropriately, validate termination and transient protection, and verify every peripheral pin against the 32-QFP assignment before releasing the PCB.
Empfohlen
Industrial Sensor and Actuator Control
The C8051F560-IQ is suitable for distributed industrial sensing and actuator modules that combine local processing with serial communication. Its 32 KB flash and 2.25 KB RAM support protocol handling, calibration data, diagnostics, and real-time control, while the ADC resources support monitoring of analog plant signals. Operation across 1.8 V to 5.25 V accommodates systems built around different industrial supply rails. The automotive qualification provides useful environmental robustness for harsh installations. Use the internal or external voltage-reference option according to measurement accuracy requirements, and isolate analog inputs from high-current switching paths to preserve signal quality.
Empfohlen
LIN Automotive Sub-Networks
The C8051F560-IQ can serve as the local controller for LIN-connected vehicle sub-networks where fast task execution and mixed-signal monitoring are needed. Its 50 MHz processor provides scheduling margin for protocol handling and application tasks, and the 32 KB flash supports a larger control program than the 16 KB C8051F565-IQ option. LIN 2.1 support simplifies integration with sensors and actuators commonly used for body, comfort, and powertrain-adjacent functions. Qualification to AEC-Q100 and an operating temperature of up to 125 °C align the MCU with demanding vehicle environments, although transient protection and bus EMC validation remain essential.
Empfohlen
Embedded Data Acquisition
The C8051F560-IQ supports compact embedded data-acquisition systems that combine analog measurement with local control or communications. The manufacturer documentation identifies conversion performance up to 200 ksps and support for as many as 32 external single-ended inputs, while selectable VREF sources permit measurement designs to use the internal reference, an external reference, or VDD. With 2.25 KB of RAM and 32 KB of flash, the device can maintain acquisition state and transmit results through CAN or LIN. Buffer and conversion timing should be reviewed against the actual signal bandwidth, and analog routing should use short traces with suitable grounding and filtering.
Empfohlen
Building and Facility Control
The C8051F560-IQ can implement local building-control nodes for lighting, HVAC interfaces, occupancy sensing, or equipment monitoring. Its 50 MHz 8-bit core provides deterministic control performance, while CAN and LIN allow integration into larger building and industrial communication networks. The 1.8 V to 5.25 V supply range supports low-voltage sensors and legacy 5 V controller boards. Flash memory permits field configuration and firmware maintenance, while the mixed-signal section can supervise analog environment or equipment conditions. Validate communication timing, watchdog behavior, and fail-safe outputs before using the MCU for safety-critical loads.
Empfohlen
Motor and Actuator Controllers
The C8051F560-IQ is applicable to compact motor-position, valve, or actuator controllers that require fast control loops and network communication. The 50 MHz core supports deterministic task execution, and the 32 KB flash provides capacity for motion algorithms, diagnostics, and communication stacks. CAN and LIN connectivity enables command reception and status reporting, while analog resources can monitor position or current-related signals. The automotive qualification and 125 °C operating capability are useful in vehicle and industrial machinery. Use appropriate driver isolation, current sensing, overvoltage protection, and fault-handling circuits because the MCU alone does not replace power-stage hardware.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für C8051F560-IQ – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | C8051F565-IQ | C8051F503-IQ | C8051F506-IQ |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 32-QFP (7x7) | 32-QFP (7x7) | 32-QFP (7x7) | 32-QFP (7x7) |
| Processor Core | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Maximum CPU Throughput | 50 MIPS | 50 MIPS | 50 MIPS | 50 MIPS |
| CAN Interface | CAN 2.0 | CAN 2.0 | CAN 2.0 | CAN 2.0 |
Wichtigste Unterscheidungsmerkmale
- Twice the flash capacity of the identified same-family alternative (vs. C8051F565-IQ)
- Supports CAN and LIN in one automotive MCU (vs. C8051F565-IQ)
- More RAM for communications and control state (vs. C8051F565-IQ)
Designhinweise
Place the manufacturer-specified bypass capacitors beside the C8051F560-IQ supply and ground pins rather than distributing them around the board. The device supports 1.8 V to 5.25 V operation, but the selected rail must also satisfy the requirements of its analog inputs, communications interfaces, and programming connections. Validate startup behavior at the minimum and maximum specified supply voltages, especially when CAN or LIN transients can disturb the rail.
Assign every net from the C8051F560-IQ pin-description table and preserve the package's recommended land pattern. Keep analog inputs short, isolate them from switching and communications routes, and provide a quiet reference path for the selected VREF configuration. The MCU supports up to 32 external single-ended inputs, so connector routing and return paths should be planned to minimize shared impedance and coupling between measured channels.
Do not treat every C8051F56x device as an automatic substitution. The C8051F565-IQ has 16 KB of flash rather than 32 KB, and other family members may differ in RAM, LIN, ADC, timer, and pin assignments. Check the complete pin list, peripheral configuration, clock requirements, memory footprint, boot code, qualification, and package drawing before approving a replacement.
Compliance-Informationen
The Silicon Labs C8051F55x-F56x-F57x datasheet states that package options are lead-free and RoHS compliant. The C8051F560-IQ is identified as AEC-Q100 qualified and tested for enhanced temperature operation up to 125 °C.