Silicon Labs

C8051F560-IQ - 50MHz 32KB Automotive 8051 MCU | Silicon Labs

N.º da peça: C8051F560-IQ ✓ Ativo
1.8 V to 5.25 V Vdss 32-QFP, 7 x 7 mm Package 50 MHz Speed 32 KB Memory
MOQ: 1 |

C8051F560-IQ Visão geral

Silicon Labs C8051F560-IQ is an automotive-grade 8-bit 8051 microcontroller operating up to 50 MHz, with 32 KB of flash program memory, 2.25 KB of RAM, CAN and LIN connectivity, and a 32-QFP 7 x 7 mm package. The device operates from 1.8 V to 5.25 V and is AEC-Q100 qualified for enhanced operation up to 125 °C.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The C8051F560-IQ belongs to the 8051 family and the C8051F56x series, combining embedded flash memory, mixed-signal peripherals, serial communications, and automotive qualification in a surface-mount package. It is intended for systems that need deterministic 8-bit control with integrated communication and analog measurement.

Key features include a 50 MHz clock, 32 KB of flash, 2.25 KB of RAM, CAN and LIN interfaces, and mixed-signal acquisition capability. The manufacturer documentation identifies operation to 200 ksps, up to 32 external single-ended inputs, and selectable internal or external voltage-reference options. Its 1.8 V to 5.25 V supply range supports industrial, automotive, and embedded control environments operating from low-voltage rails through traditional 5 V systems.

The C8051F56x architecture supports an integrated 8051-compatible processing core with dedicated communications and mixed-signal resources. Flash program memory permits field reprogramming and in-system configuration, while RAM supports protocol stacks, control state, and data acquisition. The automotive-qualified variant adds extended temperature capability for engine-adjacent, vehicle-network, and industrial controller applications where ambient conditions exceed consumer-temperature limits.

Typical uses include CAN and LIN vehicle-network nodes, motor and actuator controllers, industrial sensing nodes, building-control interfaces, and embedded data-acquisition systems. Its communications peripherals allow the device to participate in distributed networks without requiring a separate protocol controller, while the analog resources can reduce the number of external components in monitoring designs.

Designers should verify clock, pin, and peripheral assignments against the manufacturer pinout and ordering tables before PCB release. Place decoupling capacitors close to the supply pins, route high-speed and communications signals away from noisy analog inputs, and confirm that the selected operating voltage, temperature range, oscillator configuration, and programming method match the complete system requirements.

This product summary consolidates the C8051F560-IQ identity, electrical characteristics, package information, qualification details, and replacement considerations into a single engineering reference, while the manufacturer datasheet remains the controlling document for final design validation.

Alternativas drop-in para C8051F560-IQ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com C8051F560-IQ (mesmo formato e footprint) — diferindo em Package, Flash Program Memory, Processor Core, RAM, Series.

Silicon Labs
Package: 32-LQFP (7 x 7 mm)
Series: C8051F50x
Comparar com C8051F560-IQ →
Silicon Labs
Package: 32-LQFP (7 mm × 7 mm)
Flash Program Memory: 16 KB (16K x 8)
Processor Core: 8051
Comparar com C8051F560-IQ →

C8051F565-IQ

✅ Drop-In
📦 32-QFP (7x7)
Flash memory is 16 KB versus 32 KB, a 50% reduction; clock remains 50 MHz

📋 Alternativa de referência (fora do catálogo)

C8051F503-IQ

✅ Drop-In
Silicon Labs
📦 32-QFP (7x7)
Silicon Labs · C8051F50x · 8-bit 8051-compatible CISC · 50 MHz · 50 MIPS · 64 KB (64K x 8) · 4 KB · 12-bit

Consulte o preço

Ver ficha técnica →

C8051F506-IQ

✅ Drop-In
📦 32-QFP (7x7)
Same 50 MHz C8051F56x class; peripheral configuration differs, with flash and RAM details requiring comparison

📋 Alternativa de referência (fora do catálogo)

C8051F560-IQ Classificações máximas e características elétricas

Microcontroller Family C8051F56x
Processor Core 8051 8-bit
Frequência máxima de clock 50 MHz
Maximum CPU Throughput 50 MIPS
Flash Program Memory 32 KB
RAM 2.25 KB
Supply Voltage Range 1.8 V to 5.25 V
Nominal Supply Voltages 2.5 V, 3.3 V, 5 V
ADC Conversion Rate Up to 200 ksps
External Single-Ended Inputs Up to 32
Communications Interfaces CAN 2.0 and LIN 2.1
Encapsulamento 32-QFP, 7 x 7 mm
Tipo de montagem Surface mount
Automotive Qualification AEC-Q100
Maximum Operating Temperature 125 °C
Reference Options Internal VREF, external pin, or VDD
Status RoHS Compliant
Lead-Free Status Lead-free

Guia de Configuração de Pinos do C8051F560-IQ 32-qfp, 7 x 7 mm

Configuração de pinos para C8051F560-IQ (pacote 32-qfp, 7 x 7 mm). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 32-qfp, 7 x 7 mm para C8051F560-IQ

Nenhum dado detalhado de pinagem disponível para C8051F560-IQ.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

C8051F560-IQ é adequado para 6 aplicaçãos: Automotive CAN Network Nodes, Industrial Sensor and Actuator Control, LIN Automotive Sub-Networks, Embedded Data Acquisition, Building and Facility Control, Motor and Actuator Controllers.

🚗

Automotive CAN Network Nodes

The C8051F560-IQ fits vehicle CAN nodes that require local control, communication, and mixed-signal measurement. Its 50 MHz 8-bit core executes protocol and control tasks, while 32 KB of flash provides room for application code and update logic. CAN 2.0 and LIN 2.1 support allows the same controller family to participate in hierarchical vehicle networks. AEC-Q100 qualification and operation to 125 °C strengthen its suitability for automotive environments. Designers should isolate communication lines appropriately, validate termination and transient protection, and verify every peripheral pin against the 32-QFP assignment before releasing the PCB.

🏭

Industrial Sensor and Actuator Control

The C8051F560-IQ is suitable for distributed industrial sensing and actuator modules that combine local processing with serial communication. Its 32 KB flash and 2.25 KB RAM support protocol handling, calibration data, diagnostics, and real-time control, while the ADC resources support monitoring of analog plant signals. Operation across 1.8 V to 5.25 V accommodates systems built around different industrial supply rails. The automotive qualification provides useful environmental robustness for harsh installations. Use the internal or external voltage-reference option according to measurement accuracy requirements, and isolate analog inputs from high-current switching paths to preserve signal quality.

🚗

LIN Automotive Sub-Networks

The C8051F560-IQ can serve as the local controller for LIN-connected vehicle sub-networks where fast task execution and mixed-signal monitoring are needed. Its 50 MHz processor provides scheduling margin for protocol handling and application tasks, and the 32 KB flash supports a larger control program than the 16 KB C8051F565-IQ option. LIN 2.1 support simplifies integration with sensors and actuators commonly used for body, comfort, and powertrain-adjacent functions. Qualification to AEC-Q100 and an operating temperature of up to 125 °C align the MCU with demanding vehicle environments, although transient protection and bus EMC validation remain essential.

📟

Embedded Data Acquisition

The C8051F560-IQ supports compact embedded data-acquisition systems that combine analog measurement with local control or communications. The manufacturer documentation identifies conversion performance up to 200 ksps and support for as many as 32 external single-ended inputs, while selectable VREF sources permit measurement designs to use the internal reference, an external reference, or VDD. With 2.25 KB of RAM and 32 KB of flash, the device can maintain acquisition state and transmit results through CAN or LIN. Buffer and conversion timing should be reviewed against the actual signal bandwidth, and analog routing should use short traces with suitable grounding and filtering.

🏠

Building and Facility Control

The C8051F560-IQ can implement local building-control nodes for lighting, HVAC interfaces, occupancy sensing, or equipment monitoring. Its 50 MHz 8-bit core provides deterministic control performance, while CAN and LIN allow integration into larger building and industrial communication networks. The 1.8 V to 5.25 V supply range supports low-voltage sensors and legacy 5 V controller boards. Flash memory permits field configuration and firmware maintenance, while the mixed-signal section can supervise analog environment or equipment conditions. Validate communication timing, watchdog behavior, and fail-safe outputs before using the MCU for safety-critical loads.

⚙️

Motor and Actuator Controllers

The C8051F560-IQ is applicable to compact motor-position, valve, or actuator controllers that require fast control loops and network communication. The 50 MHz core supports deterministic task execution, and the 32 KB flash provides capacity for motion algorithms, diagnostics, and communication stacks. CAN and LIN connectivity enables command reception and status reporting, while analog resources can monitor position or current-related signals. The automotive qualification and 125 °C operating capability are useful in vehicle and industrial machinery. Use appropriate driver isolation, current sensing, overvoltage protection, and fault-handling circuits because the MCU alone does not replace power-stage hardware.

Resumo dos produtos recomendados

C8051F565-IQ Same-family CAN controller candidate Usado em: Automotive CAN Network Nodes, Industrial Sensor and Actuator Control, LIN Automotive Sub-Networks, Embedded Data Acquisition, Motor and Actuator Controllers C8051F503-IQ Silicon Labs Usado em: Automotive CAN Network Nodes, LIN Automotive Sub-Networks, Building and Facility Control, Motor and Actuator Controllers C8051F506-IQ Same-family embedded control alternative Usado em: Industrial Sensor and Actuator Control, Embedded Data Acquisition, Building and Facility Control
What are the key specifications of C8051F560-IQ that engineers should know?
The C8051F560-IQ is a 50 MHz, 8-bit 8051 microcontroller with 32 KB of flash, 2.25 KB of RAM, and CAN and LIN interfaces in a 32-QFP package. According to the Silicon Labs C8051F55x-F56x-F57x datasheet, it operates from 1.8 V to 5.25 V, supports analog conversion up to 200 ksps, and is AEC-Q100 qualified for operation up to 125 °C.
What is the operating voltage of C8051F560-IQ?
The C8051F560-IQ operates from 1.8 V to 5.25 V. Manufacturer and distributor technical information identifies nominal operating rails of 2.5 V, 3.3 V, and 5 V, so the device can support both low-voltage embedded systems and conventional 5 V control equipment. Confirm external analog, communications, and programming-circuit voltage levels against the datasheet before connecting them to the MCU.
Where can I download the C8051F560-IQ datasheet PDF?
The official C8051F560-IQ datasheet PDF is available from Silicon Labs at the C8051F55x-F56x-F57x document link. It contains the ordering information, electrical characteristics, pin descriptions, package drawings, and mixed-signal block diagram. Use the ordering table to confirm that the C8051F560-IQ corresponds to the required 32-QFP industrial and automotive configuration.
Where can I find the C8051F560-IQ pinout?
The C8051F560-IQ pinout is documented in the Silicon Labs C8051F55x-F56x-F57x datasheet, where the 32-QFP pin assignment and package drawings are grouped with the device-ordering information. Assign PCB nets from that pin-description table rather than inferring locations from another C8051F56x member, because package variants can differ even when their core clock and memory sizes are similar.
What can replace C8051F560-IQ?
C8051F565-IQ is a same-family candidate with a 32-pin package and 50 MHz class operation, but its 16 KB flash is 50% below the C8051F560-IQ's 32 KB. Other C8051F56x members may also provide similar pin arrangements. A replacement should be accepted only after checking flash size, RAM, CAN and LIN support, analog resources, pin functions, timing, qualification, and the complete datasheet.
Is C8051F560-IQ the same as C8051F565-IQ?
No. Both are 50 MHz, 8-bit C8051 family devices with CAN, SPI, UART, and comparable 2 KB-class memory, but the C8051F560-IQ has 32 KB of flash while the C8051F565-IQ has 16 KB. The C8051F560-IQ therefore provides twice the program capacity. Code size, bootloader assumptions, and timeout behavior must be checked before treating the smaller-flash device as interchangeable.
Is C8051F560-IQ suitable for automotive CAN and LIN applications?
Yes. The C8051F560-IQ is AEC-Q100 qualified, supports operation up to 125 °C, and includes CAN and LIN interfaces. According to the Silicon Labs C8051F55x-F56x-F57x datasheet, its 50 MHz 8051 core, 32 KB flash, and 2.25 KB RAM suit distributed vehicle-network nodes, actuator controllers, and automotive sensing modules requiring mixed-signal and communication resources.
What is the best Silicon Labs equivalent for C8051F560-IQ?
C8051F565-IQ is the closest identified same-family candidate because it retains a 50 MHz 8-bit architecture, 32-pin package class, and CAN, SPI, and UART connectivity. Its 16 KB flash is 50% smaller than the C8051F560-IQ's 32 KB, however, so it is suitable only when the application image fits the smaller memory and all pin-level functions have been verified.
C8051F560-IQ vs C8051F565-IQ: which is better for a CAN controller?
Choose the C8051F560-IQ when firmware size, application memory, or code-update headroom matters; choose the C8051F565-IQ only after confirming that its 16 KB flash can hold the final image and boot logic. Both support 50 MHz operation and CAN communication, but the C8051F560-IQ provides 32 KB of flash versus 16 KB, a 16 KB or 100% increase in program capacity.
When should I choose C8051F560-IQ over C8051F565-IQ?
Choose the C8051F560-IQ when the design needs more than 16 KB of program memory, mixed-signal measurement, LIN support, or extended automotive-temperature operation. The C8051F565-IQ may simplify a smaller application by matching the 50 MHz class and communication architecture, but its 16 KB flash reduces firmware headroom. Pin configuration and peripheral assignment still require comparison against the manufacturer datasheets.
How much power supply decoupling does C8051F560-IQ need?
Place the required bypass capacitors directly beside the C8051F560-IQ supply and ground pins, following the values and layout shown in the manufacturer datasheet. Keep the high-current return path compact and separate analog return routing from switching-node currents where possible. The 1.8 V to 5.25 V operating range does not remove the need for local decoupling, especially when CAN, LIN, or analog inputs are active.
Can C8051F560-IQ operate at 125 °C?
Yes. The C8051F560-IQ is automotive-grade and tested to AEC-Q100 with enhanced temperature operation up to 125 °C. The manufacturer documentation identifies it as an automotive and industrial MCU option. Final thermal reliability still depends on correct supply regulation, PCB construction, enclosure temperature, and operating duty cycle.
What programming and peripheral resources does C8051F560-IQ provide?
The C8051F560-IQ combines 32 KB of flash with 2.25 KB of RAM, an 8051-compatible 8-bit core, CAN and LIN communications, and mixed-signal conversion resources. According to the Silicon Labs C8051F55x-F56x-F57x datasheet, the ADC supports operation up to 200 ksps and the reference can be selected from an internal VREF, an external pin, or VDD.
Where to buy C8051F560-IQ online?
Use the Request a Quote form on this page to request C8051F560-IQ pricing, current stock, and lead time. The request should include the exact 32-QFP ordering code, target quantity, and delivery location. This approach avoids static commercial information becoming stale and lets procurement confirm the current manufacturer and distribution channel status.
What is the price and lead time of C8051F560-IQ?
Current C8051F560-IQ pricing and lead time should be obtained through the Request a Quote form on this page. Submit the required quantity, package form, and destination so procurement can confirm current commercial terms. The C8051F560-IQ identifier is the complete ordering code for the 32-QFP device, and production planning should be based on the quote response rather than a cached market figure.

Dados de referência de engenharia para C8051F560-IQ — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the C8051F560-IQ when the design needs 32 KB of flash, 2.25 KB of RAM, both CAN and LIN, analog acquisition, and AEC-Q100 qualification for operation to 125 °C. Its 50 MHz 8-bit core and 32-QFP package suit compact automotive, industrial, sensing, and actuator-control designs. Consider the C8051F565-IQ when its 16 KB flash and 2 KB RAM are sufficient and the application does not require the C8051F560-IQ's additional memory headroom or confirmed LIN capability. C8051F503-IQ and C8051F506-IQ remain same-family candidates, but their flash, RAM, and pin-level peripheral mappings require direct datasheet validation before substitution. A production swap should confirm package land pattern, pin multiplexing, clock setup, programming method, communications timing, analog resources, qualification, and firmware size.

Comparação com alternativas

Parâmetro Este produto C8051F565-IQ C8051F503-IQ C8051F506-IQ
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 32-QFP (7x7) 32-QFP (7x7) 32-QFP (7x7) 32-QFP (7x7)
Processor Core 8-bit 8051 8-bit 8051 8-bit 8051 8-bit 8051
Maximum Clock Frequency 50 MHz 50 MHz 50 MHz 50 MHz
Maximum CPU Throughput 50 MIPS 50 MIPS 50 MIPS 50 MIPS
CAN Interface CAN 2.0 CAN 2.0 CAN 2.0 CAN 2.0

Principais diferenciais

  • Twice the flash capacity of the identified same-family alternative (vs C8051F565-IQ)
  • Supports CAN and LIN in one automotive MCU (vs C8051F565-IQ)
  • More RAM for communications and control state (vs C8051F565-IQ)

Notas de projeto

Place the manufacturer-specified bypass capacitors beside the C8051F560-IQ supply and ground pins rather than distributing them around the board. The device supports 1.8 V to 5.25 V operation, but the selected rail must also satisfy the requirements of its analog inputs, communications interfaces, and programming connections. Validate startup behavior at the minimum and maximum specified supply voltages, especially when CAN or LIN transients can disturb the rail.

Assign every net from the C8051F560-IQ pin-description table and preserve the package's recommended land pattern. Keep analog inputs short, isolate them from switching and communications routes, and provide a quiet reference path for the selected VREF configuration. The MCU supports up to 32 external single-ended inputs, so connector routing and return paths should be planned to minimize shared impedance and coupling between measured channels.

Do not treat every C8051F56x device as an automatic substitution. The C8051F565-IQ has 16 KB of flash rather than 32 KB, and other family members may differ in RAM, LIN, ADC, timer, and pin assignments. Check the complete pin list, peripheral configuration, clock requirements, memory footprint, boot code, qualification, and package drawing before approving a replacement.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
Sem chumbo
Yes
Sem halogênios
Unknown
Minerais de conflito
Unknown

The Silicon Labs C8051F55x-F56x-F57x datasheet states that package options are lead-free and RoHS compliant. The C8051F560-IQ is identified as AEC-Q100 qualified and tested for enhanced temperature operation up to 125 °C.

Dados verificados em: 2026-11-10 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

C8051F560-IQ datasheet C8051F560-IQ pinout C8051F560-IQ datasheet pdf C8051F560-IQ specifications C8051F560-IQ equivalent C8051F560-IQ replacement C8051F560-IQ cross reference C8051F560-IQ vs C8051F565-IQ Silicon Labs C8051F560-IQ C8051F560-IQ 50MHz 32KB MCU C8051F560-IQ 32-QFP C8051F560-IQ CAN LIN C8051F560-IQ price C8051F560-IQ stock C8051F560-IQ application circuit

Componentes & termos relacionados

Silicon Labs C8051F560-IQ C8051F565-IQ C8051F503-IQ C8051F506-IQ C8051F56x 8051 8-bit microcontroller embedded microcontroller semiconductor 50 MHz 32 KB flash 2.25 KB RAM CAN 2.0 LIN 2.1 SPI UART mixed-signal ADC 200 ksps VREF AEC-Q100 RoHS lead-free 32-QFP surface-mount package
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ