CD4536BDW - 24-Stage CMOS Programmable Timer | Texas Instruments
Teilenummer: CD4536BDW ✓ AktivCD4536BDW Übersicht
A programmable timer is a timing and counting semiconductor that converts elapsed time or external clock pulses into selectable digital outputs. The CD4536 belongs to the CMOS timer and counter hierarchy, combining a monostable oscillator, a ripple-binary counter, a stage-bypass function, and a four-output decoder in one integrated circuit. This integration allows a single package to replace separate oscillator, counter, and output-selection circuitry in periodic or one-shot timing systems.
The manufacturer describes 24 ripple-binary stages, a selectable output from any of 16 stages after bypassing the first eight, and operation from an external clock or an RC oscillator. Four selector inputs labeled A, B, C, and D provide the output-stage code. A logic high at the 8-BYPASS input bypasses the first eight stages, while the timer also includes a monostable input and an external reset function. Its CMOS implementation and symmetric output characteristics suit low-power digital control and timing designs.
The timer architecture supports both continuous counting and one-shot operation. The monostable input receives the triggering event, and grounding it through a resistor of 10 kΩ or higher disables the one-shot function as described by the manufacturer. When an external clock is used, the counter advances on clock transitions, while the four decoded outputs provide multiple timing taps that can reduce the need for external decoding logic.
Typical applications include industrial pulse and interval timing, delayed-event sequencing, periodic process control, laboratory pulse generators, and embedded control systems that need several related time bases. The four selectable outputs are particularly useful when one timer must provide multiple coordinated intervals instead of requiring four separate counters. An external oscillator or clock source can also establish the operating frequency for the timing system.
When designing the circuit, verify the reset polarity, oscillator component values, and selected output timing in the CD4536B datasheet. Keep bypass and selector inputs away from noisy switching nodes, use a clean clock source when timing accuracy matters, and account for supply-voltage variation. Decoupling near the supply pins and controlled input rise times are especially important when the timer is used as a long-duration counter in electrically noisy equipment.
This page combines the manufacturer's timer architecture and ordering information with practical oscillator, bypass, output-selection, and PCB guidance. It also organizes compatible CD4536B family ordering codes and distinguishes verified device characteristics from specification fields that require engineering confirmation.
Drop-in-Alternativen für CD4536BDW – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit CD4536BDW (gleiche Bauform und Footprint) – abweichend in Package, Product Type, Counter Stages, Maximum Count, Minimum Count.
CD4536BD
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →CD4536BPW
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →CD4536BPWE4
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CD4536BDW Technische Daten
| Product Type | CMOS programmable timer and ripple-binary counter |
| Maximale Taktfrequenz | 5 MHz |
| Counter Stages | 24 stages |
| Maximum Count | 2^24 |
| Minimum Count | 1 count |
| Bypassable Counter Stages | 8 stages |
| Selectable Output Stages | 16 stages |
| Output Selection Code | 4-bit code |
| Selector Inputs | A, B, C, and D |
| Clock Sources | External clock or on-chip RC oscillator |
| Versorgungsspannung | 5 V |
| Quiescent Current Test Voltage | 20 V |
| Monostable Disable Resistance | 10 kOhm or higher |
| Gehäuse | 16-SOIC |
| Package Width | 7.50 mm |
| Body Width | 0.295 mm |
| JEDEC Qualification | Meets JEDEC Tentative Standard No. 13B for B-series CMOS devices |
| Quiescent Current Test Coverage | 100% tested at 20 V |
CD4536BDW 7.50 mm Pinbelegungsleitfaden
Pinbelegung für CD4536BDW (7.50 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für CD4536BDW.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
CD4536BDW ist geeignet für 6 Anwendungs: Industrial Interval and Pulse Timing, Sequential Event Control, Periodic Process Control, Laboratory Pulse and Delay Generator, Delay-Line and Timeout Circuit, Automotive and Environmental Test Timing.
Industrial Interval and Pulse Timing
The CD4536BDW fits industrial interval timing because its 24 ripple-binary stages can count from 1 to 2^24 while four decoded outputs expose several selectable timing points. Place the timer between a sensor-conditioned pulse source and the controller input, then use the A, B, C, and D selector inputs to choose the required delay. The external-clock option makes the circuit suitable for systems where a stable system clock is preferable to the on-chip RC oscillator. Its 16-SOIC package also supports dense control boards, while the multiple outputs can reduce the number of separate timers needed for related process intervals.
Empfohlen
Sequential Event Control
The CD4536BDW is useful for sequential event control because one 24-stage counter can generate multiple related timing outputs instead of requiring independent timers for each step. The first eight stages can be bypassed, allowing a four-bit selection code to address any of 16 remaining stages. A controller can therefore enable the timer, select the required timing output, and use that output to advance a machine sequence. The reset and monostable functions support retriggerable or one-shot behavior, while a 5 MHz maximum clock rating provides substantial timing headroom for digitally controlled equipment.
Empfohlen
Periodic Process Control
The CD4536BDW can implement a compact periodic process controller when the required timing interval can be derived from a clock pulse stream. The 24-stage binary counter supports a count range from 1 to 2^24, and the selectable decoded output determines which accumulated count triggers the control action. This arrangement is appropriate for pump cycles, sampling intervals, actuator delays, and repetitive test sequences. Using an external clock allows the process timing to remain synchronized with a system oscillator, whereas the RC oscillator offers a simpler standalone implementation when moderate frequency stability is sufficient.
Empfohlen
Laboratory Pulse and Delay Generator
The CD4536BDW supports laboratory pulse and delay generation by combining a clock source, a programmable counter, and four selectable outputs in one device. A user can change the A, B, C, and D selection code to move the output point among 16 stages after bypassing the first eight. The one-shot capability is useful for generating a defined-duration pulse after a trigger, while continuous counting supports repetitive waveforms. The 5 MHz clock capability gives designers substantial timing range, and the 16-SOIC package simplifies construction in a reusable instrument or automated test fixture.
Empfohlen
Delay-Line and Timeout Circuit
The CD4536BDW can serve as a programmable timeout or delay element in equipment that must react after a defined number of clock cycles. Feed a controlled pulse train into the clock input and use one of the four decoded outputs as the timeout indication. Because the output is selectable across 16 stages after the bypass function, a single timer can provide several related delay thresholds rather than a fixed single interval. The monostable input and reset function add useful trigger and restart behavior, although external logic should ensure that the input pulse shape satisfies the timing requirements in the manufacturer datasheet.
Empfohlen
Automotive and Environmental Test Timing
The CD4536BDW can provide deterministic timing for automated test and validation systems that need selectable delay taps or repeated count intervals. Drive it from the test sequencer's clock and use the decoded outputs to trigger measurement, relay, or fixture events. Its counter architecture permits long intervals from a compact 16-SOIC package, while the external-clock input keeps events aligned with the rest of the instrument. For automotive or extended-temperature equipment, verify the exact ordering code's qualification and temperature limits before deployment; the CD4536BDW suffix should not be treated as an automatic statement of automotive approval.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CD4536BDW – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CD4536BD | CD4536BPW | CD4536BPWE4 |
|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Maximum Clock Frequency | 5 MHz | 5 MHz | 5 MHz | 5 MHz |
| Counter Stages | 24 stages | 24 stages | 24 stages | 24 stages |
| Maximum Count | 2^24 | 2^24 | 2^24 | 2^24 |
| Bypassable Stages | 8 stages | 8 stages | 8 stages | 8 stages |
| Selectable Output Stages | 16 stages | 16 stages | 16 stages | 16 stages |
| Output Selector | 4-bit code on A, B, C, and D | 4-bit code on A, B, C, and D | 4-bit code on A, B, C, and D | 4-bit code on A, B, C, and D |
| Clocking Method | External clock or on-chip RC oscillator | External clock or on-chip RC oscillator | External clock or on-chip RC oscillator | External clock or on-chip RC oscillator |
Wichtigste Unterscheidungsmerkmale
- Selectable timing across 16 counter stages (vs. CD4536BD)
- Four decoded outputs from one timer (vs. CD4536BPW)
- External-clock and RC-oscillator flexibility (vs. CD4536BPWE4)
Designhinweise
Place the decoupling capacitor and oscillator components directly beside their associated CD4536BDW pins, and route the external clock away from the four decoded outputs. The bypass and A, B, C, and D selector inputs should have short, quiet traces because switching-node coupling can change the selected timing point. When an external clock drives the counter, provide a low-impedance return path and keep the clock source isolated from relay coils, motor drivers, and high-current switching nodes.
Use clean, monotonic transitions at the clock, reset, bypass, and selector inputs to prevent false counting. The CD4536B is a CMOS timer, so slow or noisy transitions can consume additional switching energy and make behavior sensitive to board-level interference. If the source is outside the timer package, buffer or Schmitt-condition it as required. Keep the monostable input away from adjacent high-voltage switching nodes and follow the manufacturer guidance concerning reset release and input timing.
Do not assume that every CD4536B ordering code has the same environmental qualification. Confirm the operating-temperature range, package drawing, and suffix meaning for CD4536BDW against the manufacturer documentation before substitution. Also note that the 8-BYPASS input changes which 16 counter stages are decoded; leaving it in the wrong state produces valid-looking output pulses at unintended timing intervals. Validate all four selector combinations after power-up.
Decouple the supply locally and validate operation across the complete input-voltage range used by the finished equipment. The CD4536B family is characterized at 5 V, 10 V, and 15 V, and its quiescent current is 100% tested at 20 V, but these facts do not define a universal operating range for every application. Use the manufacturer's absolute maximum and recommended operating tables, and account for supply noise and ground bounce when the timer drives sensitive control signals.
Compliance-Informationen
The manufacturer states that the CD4536B meets JEDEC Tentative Standard No. 13B for B-series CMOS devices. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code.