CD4536BDW - 24-Stage CMOS Programmable Timer | Texas Instruments
MPN: CD4536BDW ✓ Hoạt độngCD4536BDW Tóm tắt
A programmable timer is a timing and counting semiconductor that converts elapsed time or external clock pulses into selectable digital outputs. The CD4536 belongs to the CMOS timer and counter hierarchy, combining a monostable oscillator, a ripple-binary counter, a stage-bypass function, and a four-output decoder in one integrated circuit. This integration allows a single package to replace separate oscillator, counter, and output-selection circuitry in periodic or one-shot timing systems.
The manufacturer describes 24 ripple-binary stages, a selectable output from any of 16 stages after bypassing the first eight, and operation from an external clock or an RC oscillator. Four selector inputs labeled A, B, C, and D provide the output-stage code. A logic high at the 8-BYPASS input bypasses the first eight stages, while the timer also includes a monostable input and an external reset function. Its CMOS implementation and symmetric output characteristics suit low-power digital control and timing designs.
The timer architecture supports both continuous counting and one-shot operation. The monostable input receives the triggering event, and grounding it through a resistor of 10 kΩ or higher disables the one-shot function as described by the manufacturer. When an external clock is used, the counter advances on clock transitions, while the four decoded outputs provide multiple timing taps that can reduce the need for external decoding logic.
Typical applications include industrial pulse and interval timing, delayed-event sequencing, periodic process control, laboratory pulse generators, and embedded control systems that need several related time bases. The four selectable outputs are particularly useful when one timer must provide multiple coordinated intervals instead of requiring four separate counters. An external oscillator or clock source can also establish the operating frequency for the timing system.
When designing the circuit, verify the reset polarity, oscillator component values, and selected output timing in the CD4536B datasheet. Keep bypass and selector inputs away from noisy switching nodes, use a clean clock source when timing accuracy matters, and account for supply-voltage variation. Decoupling near the supply pins and controlled input rise times are especially important when the timer is used as a long-duration counter in electrically noisy equipment.
This page combines the manufacturer's timer architecture and ordering information with practical oscillator, bypass, output-selection, and PCB guidance. It also organizes compatible CD4536B family ordering codes and distinguishes verified device characteristics from specification fields that require engineering confirmation.
Bộ thay thế dễ dàng lắp đặt cho CD4536BDW — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với CD4536BDW (cùng hình factor và footprint) — khác nhau ở Package, Product Type, Counter Stages, Maximum Count, Minimum Count.
CD4536BD
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →CD4536BPW
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →CD4536BPWE4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CD4536BDW Thông số kỹ thuật
| Product Type | CMOS programmable timer and ripple-binary counter |
| Tần số xung maksimum | 5 MHz |
| Counter Stages | 24 stages |
| Maximum Count | 2^24 |
| Minimum Count | 1 count |
| Bypassable Counter Stages | 8 stages |
| Selectable Output Stages | 16 stages |
| Output Selection Code | 4-bit code |
| Selector Inputs | A, B, C, and D |
| Clock Sources | External clock or on-chip RC oscillator |
| Điện áp cung cấp | 5 V |
| Quiescent Current Test Voltage | 20 V |
| Monostable Disable Resistance | 10 kOhm or higher |
| Hộp | 16-SOIC |
| Package Width | 7.50 mm |
| Body Width | 0.295 mm |
| JEDEC Qualification | Meets JEDEC Tentative Standard No. 13B for B-series CMOS devices |
| Quiescent Current Test Coverage | 100% tested at 20 V |
Hướng dẫn cấu hình chân CD4536BDW 7.50 mm
Cấu hình chân cho CD4536BDW (7.50 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho CD4536BDW.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
CD4536BDW phù hợp cho 6 Áp dụngs: Industrial Interval and Pulse Timing, Sequential Event Control, Periodic Process Control, Laboratory Pulse and Delay Generator, Delay-Line and Timeout Circuit, Automotive and Environmental Test Timing.
Industrial Interval and Pulse Timing
The CD4536BDW fits industrial interval timing because its 24 ripple-binary stages can count from 1 to 2^24 while four decoded outputs expose several selectable timing points. Place the timer between a sensor-conditioned pulse source and the controller input, then use the A, B, C, and D selector inputs to choose the required delay. The external-clock option makes the circuit suitable for systems where a stable system clock is preferable to the on-chip RC oscillator. Its 16-SOIC package also supports dense control boards, while the multiple outputs can reduce the number of separate timers needed for related process intervals.
Được đề xuất
Sequential Event Control
The CD4536BDW is useful for sequential event control because one 24-stage counter can generate multiple related timing outputs instead of requiring independent timers for each step. The first eight stages can be bypassed, allowing a four-bit selection code to address any of 16 remaining stages. A controller can therefore enable the timer, select the required timing output, and use that output to advance a machine sequence. The reset and monostable functions support retriggerable or one-shot behavior, while a 5 MHz maximum clock rating provides substantial timing headroom for digitally controlled equipment.
Được đề xuất
Periodic Process Control
The CD4536BDW can implement a compact periodic process controller when the required timing interval can be derived from a clock pulse stream. The 24-stage binary counter supports a count range from 1 to 2^24, and the selectable decoded output determines which accumulated count triggers the control action. This arrangement is appropriate for pump cycles, sampling intervals, actuator delays, and repetitive test sequences. Using an external clock allows the process timing to remain synchronized with a system oscillator, whereas the RC oscillator offers a simpler standalone implementation when moderate frequency stability is sufficient.
Được đề xuất
Laboratory Pulse and Delay Generator
The CD4536BDW supports laboratory pulse and delay generation by combining a clock source, a programmable counter, and four selectable outputs in one device. A user can change the A, B, C, and D selection code to move the output point among 16 stages after bypassing the first eight. The one-shot capability is useful for generating a defined-duration pulse after a trigger, while continuous counting supports repetitive waveforms. The 5 MHz clock capability gives designers substantial timing range, and the 16-SOIC package simplifies construction in a reusable instrument or automated test fixture.
Được đề xuất
Delay-Line and Timeout Circuit
The CD4536BDW can serve as a programmable timeout or delay element in equipment that must react after a defined number of clock cycles. Feed a controlled pulse train into the clock input and use one of the four decoded outputs as the timeout indication. Because the output is selectable across 16 stages after the bypass function, a single timer can provide several related delay thresholds rather than a fixed single interval. The monostable input and reset function add useful trigger and restart behavior, although external logic should ensure that the input pulse shape satisfies the timing requirements in the manufacturer datasheet.
Được đề xuất
Automotive and Environmental Test Timing
The CD4536BDW can provide deterministic timing for automated test and validation systems that need selectable delay taps or repeated count intervals. Drive it from the test sequencer's clock and use the decoded outputs to trigger measurement, relay, or fixture events. Its counter architecture permits long intervals from a compact 16-SOIC package, while the external-clock input keeps events aligned with the rest of the instrument. For automotive or extended-temperature equipment, verify the exact ordering code's qualification and temperature limits before deployment; the CD4536BDW suffix should not be treated as an automatic statement of automotive approval.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho CD4536BDW — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | CD4536BD | CD4536BPW | CD4536BPWE4 |
|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Maximum Clock Frequency | 5 MHz | 5 MHz | 5 MHz | 5 MHz |
| Counter Stages | 24 stages | 24 stages | 24 stages | 24 stages |
| Maximum Count | 2^24 | 2^24 | 2^24 | 2^24 |
| Bypassable Stages | 8 stages | 8 stages | 8 stages | 8 stages |
| Selectable Output Stages | 16 stages | 16 stages | 16 stages | 16 stages |
| Output Selector | 4-bit code on A, B, C, and D | 4-bit code on A, B, C, and D | 4-bit code on A, B, C, and D | 4-bit code on A, B, C, and D |
| Clocking Method | External clock or on-chip RC oscillator | External clock or on-chip RC oscillator | External clock or on-chip RC oscillator | External clock or on-chip RC oscillator |
Bảo phân biệt quan trọng
- Selectable timing across 16 counter stages (vsCD4536BD)
- Four decoded outputs from one timer (vsCD4536BPW)
- External-clock and RC-oscillator flexibility (vsCD4536BPWE4)
Ghi chú thiết kế
Place the decoupling capacitor and oscillator components directly beside their associated CD4536BDW pins, and route the external clock away from the four decoded outputs. The bypass and A, B, C, and D selector inputs should have short, quiet traces because switching-node coupling can change the selected timing point. When an external clock drives the counter, provide a low-impedance return path and keep the clock source isolated from relay coils, motor drivers, and high-current switching nodes.
Use clean, monotonic transitions at the clock, reset, bypass, and selector inputs to prevent false counting. The CD4536B is a CMOS timer, so slow or noisy transitions can consume additional switching energy and make behavior sensitive to board-level interference. If the source is outside the timer package, buffer or Schmitt-condition it as required. Keep the monostable input away from adjacent high-voltage switching nodes and follow the manufacturer guidance concerning reset release and input timing.
Do not assume that every CD4536B ordering code has the same environmental qualification. Confirm the operating-temperature range, package drawing, and suffix meaning for CD4536BDW against the manufacturer documentation before substitution. Also note that the 8-BYPASS input changes which 16 counter stages are decoded; leaving it in the wrong state produces valid-looking output pulses at unintended timing intervals. Validate all four selector combinations after power-up.
Decouple the supply locally and validate operation across the complete input-voltage range used by the finished equipment. The CD4536B family is characterized at 5 V, 10 V, and 15 V, and its quiescent current is 100% tested at 20 V, but these facts do not define a universal operating range for every application. Use the manufacturer's absolute maximum and recommended operating tables, and account for supply noise and ground bounce when the timer drives sensitive control signals.
Thông tin tuân thủ
The manufacturer states that the CD4536B meets JEDEC Tentative Standard No. 13B for B-series CMOS devices. No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code.