Harris Corporation

CD4541BFX Programmable Timer IC 6MHz 14-CERDIP | Harris

Teilenummer: CD4541BFX ✓ Aktiv
14-pin CERDIP Package 100 kHz to 6 MHz Speed
MOQ: 1 |

CD4541BFX Übersicht

The Harris Corporation CD4541BFX is a CMOS programmable timer IC with an operating frequency range of 6 MHz to 100 kHz, housed in a 14-pin CERDIP package. It combines a 16-stage binary counter, an external-component-controlled oscillator, automatic power-on reset, and output control logic in one timer device. The oscillator requires two external resistors and a capacitor, while the counter supports programmable division ratios for timing and pulse-generation applications.

A programmable timer is a timing IC that generates a stable frequency from external timing components and divides or shapes that frequency into useful timing outputs. The CD4541B belongs to the CMOS logic and clock-and-timing IC families, where low power consumption, broad supply-voltage operation, and noise immunity are useful for industrial control, automotive, medical, and consumer electronics. Its internal architecture supports oscillator timing, counter division, reset control, and selectable output operation.

The CD4541BFX provides oscillator and counter functions in one package. The oscillator frequency is set by external resistors and a capacitor, while the binary counter can provide outputs from selected stages. The device includes an automatic power-on reset circuit and a MASTER RESET input, helping establish a defined starting state in timing systems. The manufacturer identifies the operating frequency as approximately 100 kHz to 6 MHz.

The CD4541BFX is suitable for pulse generation, periodic switching, delay and retriggerable timing, automotive control logic, industrial timing modules, and low-power embedded systems. Designers should select the external resistor and capacitor values to keep the oscillator operating point within the intended frequency range and should account for the counter stage selected at the output when determining the final output frequency.

For layout, use a ceramic timing capacitor close to the oscillator capacitor pin and route the associated oscillator resistors away from high-current switching nodes. Because this is a CMOS timer, unused inputs should not be left floating. The 14-pin CERDIP package is intended for through-hole PCB assembly, and its thermal performance should be checked against the surrounding enclosure temperature and switching activity.

This product page combines the CD4541BFX timing architecture, package information, operating-frequency details, comparison guidance, and practical application notes. Use the manufacturer CD4541B datasheet for the authoritative pin description table, truth tables, oscillator equations, electrical limits, and ordering information before finalizing a design.

Drop-in-Alternativen für CD4541BFX – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit CD4541BFX (gleiche Bauform und Footprint) – abweichend in Master Reset, Package, Product Type.

Texas Instruments
Master Reset: Supported
Package: 14-pin PDIP
Product Type: CMOS programmable timer
Vergleichen mit CD4541BFX →

CD4541BFX

✅ Drop-In
Harris Corporation
📦 14-pin CDIP
Programmable timer IC · CMOS · 100 kHz to 6 MHz · 16-stage binary counter · External resistor-capacitor timing components · 2 resistors and 1 capacitor · Yes · Yes

Preis auf Anfrage

Datenblatt ansehen →

CD4541BFX

✅ Drop-In
Harris Corporation
📦 14-pin CERDIP
Programmable timer IC · CMOS · 100 kHz to 6 MHz · 16-stage binary counter · External resistor-capacitor timing components · 2 resistors and 1 capacitor · Yes · Yes

Preis auf Anfrage

Datenblatt ansehen →

CD4541BE

✅ Drop-In
Texas Instruments
📦 14-pin CERDIP
CMOS programmable timer · 100 kHz · 20 V high-voltage rating · 16 stages · 2 resistors and 1 capacitor · Automatic power-on reset · Pin 10; logic 1 for continuous square-wave mode and logic 0 for reset-dependent output mode · Oscillator frequency divided by 2N

Preis auf Anfrage

Datenblatt ansehen →

CD4541B-MIL

✅ Drop-In
📦 14-pin CERDIP
Same CD4541B timer function with a MIL-qualified ordering option; qualification, temperature, and exact package suffix must be checked against the Harris CD4541BFX.

📋 Referenzalternative (nicht im Katalog)

CD4541BFX Technische Daten

Product Type Programmable timer IC
Technology CMOS
Operating Frequency Range 100 kHz to 6 MHz
Counter Architecture 16-stage binary counter
Oscillator Control External resistor-capacitor timing components
External Timing Components 2 resistors and 1 capacitor
Automatic Power-On Reset Yes
Master Reset Yes
Output Control Selectable Q or Q-bar output operation
Output Modes Continuous square-wave or single pulse
Gehäuse 14-pin CERDIP
Package Form Factor Through-hole ceramic dual in-line package
Betriebstemperatur -55C to +125C
Terminal Finish Tin/lead (Sn/Pb)
Montageart Through-hole

CD4541BFX Pin-Konfiguration

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Pin 1 [DATA_NEEDED: pin 1 name] — Refer to the CD4541B datasheet pin-description table.
Pin 2 [DATA_NEEDED: pin 2 name] — Refer to the CD4541B datasheet pin-description table.
Pin 3 [DATA_NEEDED: pin 3 name] — Refer to the CD4541B datasheet pin-description table.
Pin 4 [DATA_NEEDED: pin 4 name] — Refer to the CD4541B datasheet pin-description table.
Pin 5 [DATA_NEEDED: pin 5 name] — Refer to the CD4541B datasheet pin-description table.
Pin 6 [DATA_NEEDED: pin 6 name] — Refer to the CD4541B datasheet pin-description table.
Pin 7 [DATA_NEEDED: pin 7 name] — Refer to the CD4541B datasheet pin-description table.
Pin 8 [DATA_NEEDED: pin 8 name] — Refer to the CD4541B datasheet pin-description table.
Pin 9 [DATA_NEEDED: pin 9 name] — Refer to the CD4541B datasheet pin-description table.
Pin 10 MODE — Output-mode selection input; continuous square-wave or single-pulse operation.
Pin 11 MASTER RESET — Counter reset input.
Pin 12 Q — Timer output.
Pin 13 Q-bar — Complementary timer output.
Pin 14 VSS — Ground reference.

Typische Anwendungen

CD4541BFX ist geeignet für 6 Anwendungs: Industrial pulse and delay generation, Automotive periodic-control module, Medical-device timing reference, Consumer flashing and periodic indicator, Test and measurement trigger circuit, Power-system repetitive sequencer.

🏭

Industrial pulse and delay generation

The CD4541BFX is well suited to industrial pulse-generation and delay circuits because its oscillator, 16-stage binary counter, MASTER RESET input, and selectable outputs are combined in one CMOS device. The external timing network establishes the base oscillator frequency, and the counter stage determines the division factor presented at the output. This allows a controller to create repetitive pulses or delayed transitions without a separate counter IC. The specified 100 kHz to 6 MHz frequency range should be treated as the design envelope, while the actual operating point must remain within the manufacturer timing limits. Use the datasheet oscillator equations to select the two resistors and capacitor, and validate tolerance across temperature if timing accuracy is important.

🚗

Automotive periodic-control module

The CD4541BFX can implement periodic switching, flashing, or delayed actuation in an automotive control module because it combines an external RC oscillator with a programmable counter and reset logic. Its listed -55C to +125C operating-temperature range supports applications across harsh ambient conditions, although AEC-Q100 qualification for the exact selected source is not established by the available product information. The timing capacitor and resistors should be placed close to the oscillator pins, with traces kept away from ignition, motor, and relay switching nodes. The designer must verify voltage limits, qualification status, output polarity, and reset behavior against the manufacturer datasheet before production release.

💊

Medical-device timing reference

The CD4541BFX can provide a compact timing reference in medical equipment where periodic sampling, flashing, watchdog-style indication, or delayed control actions are required. Its integrated oscillator, automatic power-on reset, and binary counter reduce component count compared with a discrete oscillator-and-counter implementation. The CMOS implementation is also consistent with low-power systems. However, medical equipment design requires controlled component sourcing, documented operating limits, and validation of timing behavior over the full environmental range. The timing network should be designed for the required accuracy, and the oscillator section should be isolated from high-energy analog and switching circuitry to prevent timing perturbation.

📱

Consumer flashing and periodic indicator

The CD4541BFX is suitable for simple consumer products requiring blinking indicators, repetitive alarms, delayed switch activation, or periodic enable pulses. The internal oscillator is set with external passive components, while the counter divides the signal and provides selectable output timing. This allows a low-cost design to avoid a microcontroller when the timing pattern does not require software configurability. Designers should use the MODE input and MASTER RESET according to the truth table, ensure unused inputs remain in defined states, and select resistor and capacitor tolerances appropriate to the visible or functional timing requirements. The 14-pin CERDIP package is especially convenient for through-hole hobby, education, and legacy-product assemblies.

🔧

Test and measurement trigger circuit

The CD4541BFX can generate periodic trigger signals, delayed strobes, or divided clock references for test and measurement equipment. The 16-stage binary counter provides multiple division options, and the oscillator can be tuned with external R-C components instead of a crystal when moderate frequency accuracy is acceptable. This is useful in bench instruments, repetitive test fixtures, and simple signal-generation modules. The output stage and counter stage must be chosen carefully because the final output frequency is the oscillator frequency divided by the selected factor. Confirm propagation behavior, output polarity, and reset timing from the datasheet before driving external instrumentation.

⚡

Power-system repetitive sequencer

The CD4541BFX can provide repetitive timing for power-system control boards, including periodic sampling commands, staged enable pulses, and delayed acknowledgment sequences. Automatic power-on reset establishes an initial counter state, while MASTER RESET allows the sequencer to be restarted by another control block. The CMOS timer can be paired with a switching regulator or relay driver when a fixed timing interval is required. Layout is critical: keep the RC timing network short, maintain a quiet ground reference, and separate oscillator traces from power-converter switching nodes. Verify supply-voltage tolerance, output rise and fall behavior, and maximum operating frequency in the final power-supply environment.

What is the CD4541BFX?
The CD4541BFX is a Harris Corporation CMOS programmable timer IC in a 14-pin CERDIP package. According to the manufacturer datasheet information, it combines a 16-stage binary counter, an external RC-controlled oscillator, an automatic power-on reset circuit, and output control logic. The device is used for frequency generation, timing, pulse generation, and periodic control functions.
What is the operating frequency range of CD4541BFX?
The CD4541BFX operates over an approximately 100 kHz to 6 MHz timing-frequency range. The manufacturer datasheet information identifies the part as a programmable timer with an external oscillator, so the actual operating frequency depends on the selected external resistors and capacitor. Use the datasheet oscillator equations when sizing those components.
Where can I download the CD4541B datasheet PDF?
The CD4541B datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/cd4541b.pdf. It is the appropriate document for checking the CD4541BFX pin functions, oscillator equations, counter truth table, reset behavior, electrical characteristics, and operating limits. The datasheet is also the authoritative source for validating a Harris-produced CD4541BFX.
Where can I find the CD4541BFX pinout?
The CD4541BFX pinout is documented in the manufacturer CD4541B datasheet, including the oscillator connections, MASTER RESET input, MODE input, and Q or Q-bar output pins. The CD4541BFX uses a 14-pin through-hole CERDIP outline. Use the pin-description table and truth table when assigning PCB nets and verifying signal polarity.
How is the CD4541BFX oscillator configured?
The CD4541BFX oscillator is controlled by two external resistors and one external capacitor. According to the manufacturer datasheet information, the oscillator generates the clock used by the internal 16-stage binary counter. The timing components must be selected from the datasheet equations and placed close to the oscillator pins for predictable timing behavior.
What are the main outputs of the CD4541BFX?
The CD4541BFX provides selectable timer outputs based on the counter stage and output configuration. The manufacturer information describes Q or Q-bar outputs from selected counter stages, with a MODE input that can select continuous square-wave operation or a single-pulse output after MASTER RESET. Check the datasheet truth table for the exact polarity and stage relationship.
Does the CD4541BFX have automatic power-on reset?
Yes. The CD4541BFX includes an automatic power-on reset circuit according to the manufacturer datasheet information. This helps initialize the internal counter during startup, while the MASTER RESET input provides a dedicated reset path for controlled system operation. The timing of external reset release should still be checked against the system power sequence.
Is the CD4541BFX suitable for automotive applications?
The CD4541BFX is used in automotive systems according to the manufacturer product information, and its specified operating-temperature range is -55C to +125C. However, the available product data does not confirm AEC-Q100 qualification for this exact orderable part. Automotive designs should verify qualification, temperature performance, availability, and any vehicle-specific requirements before release.
What is the difference between the CD4541BFX and CD4541B?
The CD4541BFX is the Harris Corporation 14-pin CERDIP orderable designation, while CD4541B is the family designation used for the programmable timer function. The CD4541B datasheet describes the underlying architecture and electrical behavior. Package, manufacturer, qualification, and ordering suffixes should be checked separately before treating one orderable MPN as a direct replacement for the other.
Can CD4541BFX be used for pulse generation?
Yes, the CD4541BFX is suitable for pulse-generation and periodic-timing applications. Its oscillator and 16-stage binary counter can create a divided timing reference, and the MODE and MASTER RESET controls allow the output to be configured for a continuous square wave or a triggered single pulse. The external timing network determines the base frequency and output timing.
What is the best drop-in replacement for CD4541BFX?
A true drop-in replacement for the CD4541BFX should use the same 14-pin CERDIP footprint, provide the same pin functions, and match the oscillator, counter, supply-voltage, and timing characteristics. The available product information identifies Harris, Rochester Electronics, and Intersil versions associated with the CD4541BFX family, but it does not establish enough package and pinout detail to certify every variant as a drop-in replacement. Request a quote for the exact qualified source and confirm the datasheet before substitution.
Can Rochester Electronics CD4541BFX replace the Harris CD4541BFX?
The Rochester Electronics CD4541BFX is a strong candidate for replacement because the manufacturer-related product records associate it with the same CD4541BFX family and a 14-pin CDIP format. Final drop-in approval still requires matching the Harris CERDIP pin configuration, electrical limits, oscillator equations, and temperature requirements against the Rochester-specific datasheet. The available listing does not establish a complete cross-reference matrix.
When should I choose CD4541BFX instead of a crystal-based timer?
Choose the CD4541BFX when the required timing frequency can be set conveniently with external resistors and a capacitor and when adjustable division through the internal counter is useful. It avoids the discrete crystal and load-capacitor network normally associated with a crystal-based timer. For applications requiring very tight frequency accuracy or long-term stability, choose a timing solution with a specified crystal tolerance and aging characteristic instead.
How should I request a quote for CD4541BFX?
Use the Request a Quote form on this page to request CD4541BFX pricing, stock confirmation, lead time, and minimum order quantity. The available product listings do not provide a verifiable quantity-break price table for this exact MPN, so no fixed commercial price should be assumed. Provide the required package variant, quantity, and target date when submitting the request.
What should I check when designing with the CD4541BFX?
Check the external oscillator resistor and capacitor values, the selected counter output stage, reset polarity, and the required output frequency in the manufacturer datasheet. Keep the timing capacitor close to its associated pin, avoid leaving CMOS inputs floating, and validate the operating-temperature range for the assembled product. Also confirm that the 14-pin through-hole footprint matches the selected production source.

Technische Referenzdaten für CD4541BFX – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the Harris CD4541BFX when the design needs a through-hole 14-pin CERDIP programmable timer with an external RC oscillator, 16-stage binary counter, automatic power-on reset, and a specified 100 kHz-to-6 MHz frequency range. It is particularly suitable for legacy, industrial, automotive, and educational designs that can use through-hole assembly and fixed timing networks. Select the Rochester Electronics CD4541BFX when source availability or lifecycle support is the deciding factor, after confirming its CDIP pin and electrical equivalence. Consider the Intersil CD4541BFX when its sourcing terms or qualification documentation are preferred, and validate the exact termination and datasheet limits. CD4541B and CD4541B-MIL from Texas Instruments are sensible sourcing alternatives, but their exact orderable package, qualification, temperature, and electrical details must be checked. Do not select a CD4541-family substitute unless its pinout, oscillator equations, reset polarity, and supply limits match the original PCB design.

Vergleich mit Alternativen

Parameter Dieses Produkt CD4541BFX CD4541BFX CD4541B CD4541B-MIL
Brand Harris Rochester Electronics Intersil Texas Instruments Texas Instruments
Package 14-pin CERDIP 14-pin CDIP 14-pin CERDIP 14-pin CERDIP 14-pin CERDIP
Product Type Programmable timer IC Programmable timer IC Programmable timer IC Programmable timer IC CMOS programmable timer
Technology CMOS CMOS CMOS CMOS CMOS

Wichtigste Unterscheidungsmerkmale

  • Combines oscillator, counter, and reset functions (vs. CS82C54-12)
  • Broad timing-frequency envelope (vs. CD4541B-MIL)
  • Defined temperature range for harsh environments (vs. CD4541B)

Designhinweise

Place the timing capacitor and its associated resistor network close to the CD4541BFX oscillator pins. Keep oscillator traces short and route them away from switching-regulator power nodes, relay drivers, inductors, and high-voltage timing edges. A compact timing loop reduces parasitic capacitance and susceptibility to injected noise. Use a solid ground reference and avoid sharing narrow ground paths with high-current output stages.

Do not assume that the oscillator frequency equals the output frequency. The output is divided by the selected binary-counter stage, and the MODE input determines whether the output is a continuous square wave or a single pulse. Check the CD4541B datasheet truth table for output polarity, MASTER RESET behavior, and the exact counter stage used. Also keep unused CMOS inputs in defined states rather than allowing them to float.

Validate supply-voltage range and timing performance at the minimum and maximum operating voltages expected in the finished equipment. RC oscillator accuracy can be affected by resistor and capacitor tolerances, temperature, and supply variation. For applications requiring a precise time base, calculate the timing tolerance from the actual component limits or choose a crystal-based timer with a specified frequency accuracy. Confirm the output-drive requirements for any attached load before finalizing the circuit.

The CD4541BFX is a low-power CMOS timer in a 14-pin CERDIP package, but the through-hole package and its solder joints still require attention in elevated-temperature assemblies. Mount the device in accordance with the manufacturer package information and keep it away from heat-generating components when practical. Check the maximum operating temperature of -55C to +125C against the actual enclosure temperature, including temperature rise at the device location rather than only ambient temperature.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available product records identify tin/lead termination for an Intersil-associated CD4541BFX record and describe RoHS-related product information, but they do not establish a definitive compliance status for the Harris CD4541BFX orderable part.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

CD4541BFX CD4541BFX datasheet CD4541BFX datasheet pdf CD4541BFX pinout CD4541BFX equivalent CD4541BFX replacement CD4541BFX drop-in substitute CD4541BFX cross reference CD4541BFX 14-CERDIP CD4541BFX programmable timer CD4541BFX 6MHz CD4541BFX price CD4541BFX stock Harris CD4541BFX

Verwandte Bauteile & Begriffe

Harris CD4541BFX CD4541B CD4541B-MIL Rochester Electronics Intersil Texas Instruments programmable timer CMOS clock and timing IC 16-stage binary counter RC oscillator automatic power-on reset MASTER RESET MODE input continuous square wave single-pulse output Q output Q-bar output 100 kHz 6 MHz 14-pin CERDIP through-hole package industrial control automotive electronics
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen