CD4541BFX Programmable Timer IC 6MHz 14-CERDIP | Harris
MPN: CD4541BFX ✓ AktifCD4541BFX Ringkasan
A programmable timer is a timing IC that generates a stable frequency from external timing components and divides or shapes that frequency into useful timing outputs. The CD4541B belongs to the CMOS logic and clock-and-timing IC families, where low power consumption, broad supply-voltage operation, and noise immunity are useful for industrial control, automotive, medical, and consumer electronics. Its internal architecture supports oscillator timing, counter division, reset control, and selectable output operation.
The CD4541BFX provides oscillator and counter functions in one package. The oscillator frequency is set by external resistors and a capacitor, while the binary counter can provide outputs from selected stages. The device includes an automatic power-on reset circuit and a MASTER RESET input, helping establish a defined starting state in timing systems. The manufacturer identifies the operating frequency as approximately 100 kHz to 6 MHz.
The CD4541BFX is suitable for pulse generation, periodic switching, delay and retriggerable timing, automotive control logic, industrial timing modules, and low-power embedded systems. Designers should select the external resistor and capacitor values to keep the oscillator operating point within the intended frequency range and should account for the counter stage selected at the output when determining the final output frequency.
For layout, use a ceramic timing capacitor close to the oscillator capacitor pin and route the associated oscillator resistors away from high-current switching nodes. Because this is a CMOS timer, unused inputs should not be left floating. The 14-pin CERDIP package is intended for through-hole PCB assembly, and its thermal performance should be checked against the surrounding enclosure temperature and switching activity.
This product page combines the CD4541BFX timing architecture, package information, operating-frequency details, comparison guidance, and practical application notes. Use the manufacturer CD4541B datasheet for the authoritative pin description table, truth tables, oscillator equations, electrical limits, and ordering information before finalizing a design.
Pilihan pengganti yang segera untuk CD4541BFX — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera CD4541BFX (sama faktor bentuk dan kaki) — berbeza dalam Master Reset, Package, Product Type.
CD4541BFX
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →CD4541BFX
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →CD4541BE
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →CD4541B-MIL
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CD4541BFX Spesifikasi
| Product Type | Programmable timer IC |
| Technology | CMOS |
| Operating Frequency Range | 100 kHz to 6 MHz |
| Counter Architecture | 16-stage binary counter |
| Oscillator Control | External resistor-capacitor timing components |
| External Timing Components | 2 resistors and 1 capacitor |
| Automatic Power-On Reset | Yes |
| Master Reset | Yes |
| Output Control | Selectable Q or Q-bar output operation |
| Output Modes | Continuous square-wave or single pulse |
| Kemasan | 14-pin CERDIP |
| Package Form Factor | Through-hole ceramic dual in-line package |
| Suhu Operasi | -55C to +125C |
| Terminal Finish | Tin/lead (Sn/Pb) |
| Jenis Pemasangan | Through-hole |
Konfigurasi Pin CD4541BFX
| Pin 1 | [DATA_NEEDED: pin 1 name] — Refer to the CD4541B datasheet pin-description table. |
| Pin 2 | [DATA_NEEDED: pin 2 name] — Refer to the CD4541B datasheet pin-description table. |
| Pin 3 | [DATA_NEEDED: pin 3 name] — Refer to the CD4541B datasheet pin-description table. |
| Pin 4 | [DATA_NEEDED: pin 4 name] — Refer to the CD4541B datasheet pin-description table. |
| Pin 5 | [DATA_NEEDED: pin 5 name] — Refer to the CD4541B datasheet pin-description table. |
| Pin 6 | [DATA_NEEDED: pin 6 name] — Refer to the CD4541B datasheet pin-description table. |
| Pin 7 | [DATA_NEEDED: pin 7 name] — Refer to the CD4541B datasheet pin-description table. |
| Pin 8 | [DATA_NEEDED: pin 8 name] — Refer to the CD4541B datasheet pin-description table. |
| Pin 9 | [DATA_NEEDED: pin 9 name] — Refer to the CD4541B datasheet pin-description table. |
| Pin 10 | MODE — Output-mode selection input; continuous square-wave or single-pulse operation. |
| Pin 11 | MASTER RESET — Counter reset input. |
| Pin 12 | Q — Timer output. |
| Pin 13 | Q-bar — Complementary timer output. |
| Pin 14 | VSS — Ground reference. |
Aplikasi Biasa
CD4541BFX patut untuk 6 aplikasis: Industrial pulse and delay generation, Automotive periodic-control module, Medical-device timing reference, Consumer flashing and periodic indicator, Test and measurement trigger circuit, Power-system repetitive sequencer.
Industrial pulse and delay generation
The CD4541BFX is well suited to industrial pulse-generation and delay circuits because its oscillator, 16-stage binary counter, MASTER RESET input, and selectable outputs are combined in one CMOS device. The external timing network establishes the base oscillator frequency, and the counter stage determines the division factor presented at the output. This allows a controller to create repetitive pulses or delayed transitions without a separate counter IC. The specified 100 kHz to 6 MHz frequency range should be treated as the design envelope, while the actual operating point must remain within the manufacturer timing limits. Use the datasheet oscillator equations to select the two resistors and capacitor, and validate tolerance across temperature if timing accuracy is important.
Disebarkan
Automotive periodic-control module
The CD4541BFX can implement periodic switching, flashing, or delayed actuation in an automotive control module because it combines an external RC oscillator with a programmable counter and reset logic. Its listed -55C to +125C operating-temperature range supports applications across harsh ambient conditions, although AEC-Q100 qualification for the exact selected source is not established by the available product information. The timing capacitor and resistors should be placed close to the oscillator pins, with traces kept away from ignition, motor, and relay switching nodes. The designer must verify voltage limits, qualification status, output polarity, and reset behavior against the manufacturer datasheet before production release.
Disebarkan
Medical-device timing reference
The CD4541BFX can provide a compact timing reference in medical equipment where periodic sampling, flashing, watchdog-style indication, or delayed control actions are required. Its integrated oscillator, automatic power-on reset, and binary counter reduce component count compared with a discrete oscillator-and-counter implementation. The CMOS implementation is also consistent with low-power systems. However, medical equipment design requires controlled component sourcing, documented operating limits, and validation of timing behavior over the full environmental range. The timing network should be designed for the required accuracy, and the oscillator section should be isolated from high-energy analog and switching circuitry to prevent timing perturbation.
Disebarkan
Consumer flashing and periodic indicator
The CD4541BFX is suitable for simple consumer products requiring blinking indicators, repetitive alarms, delayed switch activation, or periodic enable pulses. The internal oscillator is set with external passive components, while the counter divides the signal and provides selectable output timing. This allows a low-cost design to avoid a microcontroller when the timing pattern does not require software configurability. Designers should use the MODE input and MASTER RESET according to the truth table, ensure unused inputs remain in defined states, and select resistor and capacitor tolerances appropriate to the visible or functional timing requirements. The 14-pin CERDIP package is especially convenient for through-hole hobby, education, and legacy-product assemblies.
Disebarkan
Test and measurement trigger circuit
The CD4541BFX can generate periodic trigger signals, delayed strobes, or divided clock references for test and measurement equipment. The 16-stage binary counter provides multiple division options, and the oscillator can be tuned with external R-C components instead of a crystal when moderate frequency accuracy is acceptable. This is useful in bench instruments, repetitive test fixtures, and simple signal-generation modules. The output stage and counter stage must be chosen carefully because the final output frequency is the oscillator frequency divided by the selected factor. Confirm propagation behavior, output polarity, and reset timing from the datasheet before driving external instrumentation.
Disebarkan
Power-system repetitive sequencer
The CD4541BFX can provide repetitive timing for power-system control boards, including periodic sampling commands, staged enable pulses, and delayed acknowledgment sequences. Automatic power-on reset establishes an initial counter state, while MASTER RESET allows the sequencer to be restarted by another control block. The CMOS timer can be paired with a switching regulator or relay driver when a fixed timing interval is required. Layout is critical: keep the RC timing network short, maintain a quiet ground reference, and separate oscillator traces from power-converter switching nodes. Verify supply-voltage tolerance, output rise and fall behavior, and maximum operating frequency in the final power-supply environment.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CD4541BFX — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | CD4541BFX | CD4541BFX | CD4541B | CD4541B-MIL |
|---|---|---|---|---|---|
| Brand | Harris | Rochester Electronics | Intersil | Texas Instruments | Texas Instruments |
| Package | 14-pin CERDIP | 14-pin CDIP | 14-pin CERDIP | 14-pin CERDIP | 14-pin CERDIP |
| Product Type | Programmable timer IC | Programmable timer IC | Programmable timer IC | Programmable timer IC | CMOS programmable timer |
| Technology | CMOS | CMOS | CMOS | CMOS | CMOS |
Penyeberangsung Jelas
- Combines oscillator, counter, and reset functions (vsCS82C54-12)
- Broad timing-frequency envelope (vsCD4541B-MIL)
- Defined temperature range for harsh environments (vsCD4541B)
Catatan Desain
Place the timing capacitor and its associated resistor network close to the CD4541BFX oscillator pins. Keep oscillator traces short and route them away from switching-regulator power nodes, relay drivers, inductors, and high-voltage timing edges. A compact timing loop reduces parasitic capacitance and susceptibility to injected noise. Use a solid ground reference and avoid sharing narrow ground paths with high-current output stages.
Do not assume that the oscillator frequency equals the output frequency. The output is divided by the selected binary-counter stage, and the MODE input determines whether the output is a continuous square wave or a single pulse. Check the CD4541B datasheet truth table for output polarity, MASTER RESET behavior, and the exact counter stage used. Also keep unused CMOS inputs in defined states rather than allowing them to float.
Validate supply-voltage range and timing performance at the minimum and maximum operating voltages expected in the finished equipment. RC oscillator accuracy can be affected by resistor and capacitor tolerances, temperature, and supply variation. For applications requiring a precise time base, calculate the timing tolerance from the actual component limits or choose a crystal-based timer with a specified frequency accuracy. Confirm the output-drive requirements for any attached load before finalizing the circuit.
The CD4541BFX is a low-power CMOS timer in a 14-pin CERDIP package, but the through-hole package and its solder joints still require attention in elevated-temperature assemblies. Mount the device in accordance with the manufacturer package information and keep it away from heat-generating components when practical. Check the maximum operating temperature of -55C to +125C against the actual enclosure temperature, including temperature rise at the device location rather than only ambient temperature.
Maklumat Kesediaan
The available product records identify tin/lead termination for an Intersil-associated CD4541BFX record and describe RoHS-related product information, but they do not establish a definitive compliance status for the Harris CD4541BFX orderable part.