Cirrus Logic Inc.

CS8421-CZZ - 32-Bit 192kHz Stereo Audio SRC | Cirrus Logic

Teilenummer: CS8421-CZZ ✗ Abgekündigt
2.38 V to 2.62 V Vdss 20-pin TSSOP Package Asynchronous, external data-clock synchronous, or integrated oscillator Speed
MOQ: 1 |

CS8421-CZZ Übersicht

The Cirrus Logic CS8421-CZZ is a 32-bit, high-performance monolithic CMOS asynchronous stereo sample-rate converter capable of supporting sample rates up to 192 kHz. The device accepts and produces 32-bit, 24-bit, 20-bit, or 16-bit digital audio data and is packaged in a space-saving 20-pin TSSOP.

An asynchronous sample-rate converter sits between digital audio domains that do not share the same clock. The CS8421 converts the incoming audio stream to a new sample rate while supporting fully asynchronous operation, synchronization to an external data clock, or operation from its integrated oscillator. This makes it suitable for digital audio equipment, broadcast systems, consumer converters, and test equipment that must reconcile mismatched audio clocks.

The converter uses 32-bit internal processing and supports digital audio word lengths of 16, 20, 24, or 32 bits. Its stereo architecture handles two audio channels in a single package. Input and output interfaces operate from low-voltage digital supply rails, supporting both 2.38 V to 2.62 V and 3.14 V to 5.25 V supply conditions according to the device documentation.

The 20-pin TSSOP package reduces board area compared with larger audio converter packages. Its gull-wing lead geometry supports conventional surface-mount assembly and inspection. Commercial-grade ordering information identifies a temperature range of -10°C to +70°C for this package variant.

Typical uses include asynchronous digital audio routing, sample-rate normalization between playback and recording domains, professional audio conversion, multimedia equipment, and audio processing subsystems. Because the part can operate without an external clock through its integrated oscillator, it also supports clock-independent conversion where a clean external reference is unavailable.

When laying out a design, treat the converter as a precision digital signal-processing block. Keep input and output interface traces short, follow the recommended decoupling arrangement, and provide a stable low-noise supply. Confirm master and slave clock relationships, audio data format, channel assignment, and de-emphasis requirements against the manufacturer pin-description and application guidance before releasing a PCB.

Drop-in-Alternativen für CS8421-CZZ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit CS8421-CZZ (gleiche Bauform und Footprint) – abweichend in Package.

Cirrus Logic Inc.
Package: 20-QFN, 5 mm × 5 mm
Vergleichen mit CS8421-CZZ →

CS8416-CZZ

✅ Drop-In
Cirrus Logic Inc.
📦 20-pin TSSOP
Digital audio interface receiver · 192 kHz · IEC60958, S/PDIF, EIAJ CP1201, or AES3 · 8 pairs · 8:2 · 3 pins · 200 ps · Monolithic CMOS

Preis auf Anfrage

Datenblatt ansehen →

CS8421-CZZ Grenzwerte & elektrische Eigenschaften

Device Type Asynchronous stereo sample-rate converter
Internal Data Width 32 bit
Maximum Sample Rate 192 kHz
Maximum Supported Sample Rate 211 kHz
Audio Channels 2 channels (stereo)
Input Data Widths 32 bit, 24 bit, 20 bit, or 16 bit
Output Data Widths 32 bit, 24 bit, 20 bit, or 16 bit
Operating Principle Monolithic CMOS
Clock Modes Asynchronous, external data-clock synchronous, or integrated oscillator
Integrated Oscillator Yes
Low Supply Voltage Range 2.38 V to 2.62 V
High Supply Voltage Range 3.14 V to 5.25 V
Schnittstellentyp 3-wire serial
Gehäuse 20-pin TSSOP
Terminal Count 20
Montageart Surface mount
Terminal Form Gull wing
Package Shape Rectangular
Temperature Grade Commercial
Betriebstemperaturbereich -10°C to +70°C
Automotive-Grade Variants Available in the CS8421 family at -40°C to +85°C and -40°C to +105°C
Evaluation Platform CDB8421 customer demonstration board

CS8421-CZZ rectangular Pinbelegungsleitfaden

Pinbelegung für CS8421-CZZ (rectangular-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für CS8421-CZZ im rectangular-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für CS8421-CZZ.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

CS8421-CZZ ist geeignet für 6 Anwendungs: Asynchronous Digital Audio Routing, Professional Digital Audio Converters, Consumer Hi-Fi Network Audio, USB and Digital Audio Adapters, Broadcast and Studio Clock Adaptation, Audio Test and Measurement Equipment.

🎧

Asynchronous Digital Audio Routing

The CS8421-CZZ fits systems in which the incoming PCM stream and outgoing audio bus use unrelated clock domains. Its asynchronous stereo conversion mode continuously reconciles the two rates while accepting and producing 16-, 20-, 24-, or 32-bit words. The 32-bit internal architecture preserves headroom for high-resolution audio, while the integrated oscillator provides a fallback when an external master clock is unavailable. Place the converter at the boundary between the two clock domains and verify that the source and destination formats, channel mappings, and serialization timing comply with the manufacturer interface requirements.

🏭

Professional Digital Audio Converters

The CS8421-CZZ is suited to professional and studio-oriented equipment that must normalize sample rates across multiple digital audio sources. Its stereo 32-bit processing supports high-resolution word lengths, and the 192 kHz nominal maximum rate covers high-resolution studio formats. The 20-pin TSSOP package also allows the converter to fit into compact breakout boards and modular audio equipment. In such systems, use the asynchronous mode when source and destination clocks are independent, and confirm supported audio serial formats and clock-output behavior in the manufacturer datasheet.

🌐

Consumer Hi-Fi Network Audio

The CS8421-CZZ can serve as the sample-rate reconciliation stage in a network-audio player that receives PCM from a transport and feeds a DAC operating under a different clock. Fully asynchronous operation avoids forcing the entire system onto one master clock, while 24-bit and 32-bit paths accommodate high-resolution music formats. The integrated oscillator offers an additional implementation option when the transport interface cannot provide a suitable reference. Validate the required I2S-compatible data framing, channel order, and de-emphasis settings against the device's supported interface configurations before finalizing the board.

🖥️

USB and Digital Audio Adapters

The CS8421-CZZ is useful in USB audio adapters and digital front ends where audio arrives from a transport with one clock and is converted for a DAC or codec with another. Its 16- through 32-bit word-length flexibility allows a common conversion stage to support multiple source formats. The device's integrated oscillator and three operating modes help designers accommodate asynchronous, synchronous, and clock-independent architectures. The TSSOP-20 footprint reduces board area, but the design must still provide clean supply decoupling and properly terminated digital interfaces.

📻

Broadcast and Studio Clock Adaptation

The CS8421-CZZ can bridge digital audio sources with incompatible sampling clocks in broadcast monitoring and studio signal-chain equipment. Its asynchronous stereo architecture supports conversion up to a 192 kHz nominal rate while maintaining selectable 16-, 20-, 24-, or 32-bit data paths. The integrated oscillator is helpful when a transport does not expose a usable master clock. For dependable operation, derive the correct operating mode from the control interface and validate the converter against the studio clocking and digital-audio format standards used by the target equipment.

🧪

Audio Test and Measurement Equipment

The CS8421-CZZ is appropriate for test systems that must present audio data at a sample rate different from the incoming stream. Its ability to run asynchronously or from an integrated oscillator makes it useful for standalone conversion fixtures and automated audio test platforms. The 32-bit processing and support for 16- through 32-bit words accommodate both conventional and high-resolution test vectors. Because the part is obsolete, test-equipment designers should also evaluate current converters when building new platforms, while the CS8421 remains useful for maintaining and reproducing existing designs.

What is the CS8421-CZZ used for?
The CS8421-CZZ is a 32-bit asynchronous stereo sample-rate converter that reconciles digital audio streams running from different clock domains. It supports input and output data widths of 16, 20, 24, or 32 bits and can operate asynchronously, synchronize to an external data clock, or run from its integrated oscillator. According to the Cirrus Logic product overview, it is intended for high-performance digital audio conversion at rates up to 192 kHz.
What are the key specifications of CS8421-CZZ?
The CS8421-CZZ provides 32-bit processing, stereo operation, 192 kHz nominal maximum sample rate, and support for 16-, 20-, 24-, or 32-bit input and output words. It uses a 3-wire serial interface and operates in a 20-pin TSSOP package. The family also supports sample rates up to 211 kHz and can run without an external clock by using an integrated oscillator, according to the manufacturer datasheet.
Where can I download the CS8421-CZZ datasheet PDF?
The official CS8421 manufacturer product page is the preferred starting point for the CS8421-CZZ datasheet and family documentation. The linked document is titled CS8421 and describes the 32-bit, 192 kHz asynchronous stereo converter. It also covers the CS8421 family pin descriptions, interface formats, clocking modes, electrical characteristics, ordering information, and the CDB8421 demonstration board.
Where can I find the CS8421-CZZ pinout?
The CS8421-CZZ pinout is documented in the pin-description section of the CS8421 manufacturer datasheet. The component uses a 20-pin TSSOP package with gull-wing leads. Use the datasheet pin-description table when assigning signals, especially the serial audio data, clock, serial-control, power, and ground connections, because assigning signals from a generic audio converter diagram can produce incompatible clocking or control connections.
Does CS8421-CZZ support asynchronous operation without an external clock?
Yes. The CS8421 can perform fully asynchronous conversion, synchronize to an external data clock, or operate without any external clock by using its integrated oscillator. This flexibility supports systems where the source and destination audio domains use unrelated clocks or where a dedicated external clock source is undesirable. Configuration details and mode-selection requirements should be confirmed in the manufacturer application guidance.
What audio bit depths are supported by the CS8421-CZZ?
The CS8421-CZZ accepts and produces digital audio data in 32-bit, 24-bit, 20-bit, or 16-bit formats. These formats cover high-resolution PCM streams as well as conventional consumer audio word lengths. The manufacturer describes the CS8421 as a 32-bit high-performance monolithic CMOS converter, allowing 32-bit-capable interfaces to retain full word length while also supporting lower-resolution source and destination formats.
Is CS8421-CZZ still active?
No. Cirrus Logic identifies the CS8421 as discontinued on its official product page, so the lifecycle status of the CS8421-CZZ is obsolete. The manufacturer page remains useful for documentation, but new production designs should confirm roadmap and availability before committing. For new designs, request the current recommended successor or migration path through the Request a Quote form on this page.
What is the best drop-in replacement for CS8421-CZZ?
No verified drop-in replacement is identified for the CS8421-CZZ. A true drop-in replacement must use the same 20-pin TSSOP footprint, preserve pin-to-pin signal assignments, and maintain compatible audio word lengths, clock modes, supply conditions, and control behavior. The CS8416-CZZ appears in manufacturer-related cross-reference listings, but its converter configuration must be validated before it is treated as a substitute rather than a related family device.
Can CS8416-CZZ replace CS8421-CZZ?
The CS8416-CZZ should not be assumed to be a direct substitute for the CS8421-CZZ without a detailed interface review. It belongs to the same manufacturer's related sample-rate-converter family and appears in cross-reference listings, but replacement requires verification of pin assignments, channel count, supported data formats, clock architecture, operating modes, and supply sequencing. Treat it as a design-review candidate rather than a confirmed drop-in replacement.
What is the best Cirrus Logic equivalent for CS8421-CZZ?
The closest documented alternatives are Cirrus Logic's related CS8400-family converters, including the CS8416-CZZ, CS8420-CSZ, and CS8427-CSR. Their suitability depends on package, pinout, channel count, clocking architecture, and interface features. Because the CS8421-CZZ is a 20-pin TSSOP stereo converter, select a related device only after confirming mechanical and pin-level compatibility with the existing board footprint.
When should I choose the CS8421-CZZ over a switching-clock audio converter?
Choose the CS8421-CZZ when the design requires a dedicated asynchronous stereo sample-rate converter with 32-bit processing and flexible external or internal clocking. It avoids placing a switching clock generator directly in the audio data path, which can simplify filtering of high-frequency clock-related energy. The trade-off is that the CS8421-CZZ is obsolete, so long-term supply continuity and lifecycle risk must be balanced against board redesign effort.
Is CS8421-CZZ suitable for professional audio equipment?
The CS8421-CZZ is technically suitable for digital audio equipment requiring stereo asynchronous conversion, 16- through 32-bit audio words, and support for sample rates up to 192 kHz. Its 20-pin TSSOP package also suits compact designs. However, the commercial temperature grade covers -10°C to +70°C, so it is not the appropriate selection for industrial or automotive temperature ranges without additional qualification.
How do I choose between CS8421-CZZ and CS8420-CSZ?
The CS8421-CZZ is a 20-pin TSSOP stereo asynchronous converter, while the CS8420-CSZ belongs to a related Cirrus Logic converter family. Selection should begin with the required package and board footprint, then compare channel count, supported audio formats, clock sources, control interface, operating modes, supply range, and lifecycle status. Because the CS8421-CZZ is obsolete, a footprint-compatible newer device may offer better long-term availability.
What power supplies does CS8421-CZZ require?
The CS8421-CZZ supports low-voltage operation from 2.38 V to 2.62 V and higher-voltage operation from 3.14 V to 5.25 V. These ranges allow integration into both low-voltage digital audio designs and conventional 3.3 V or 5 V systems. Decoupling values, sequencing requirements, and the exact internal supply arrangement should be taken from the manufacturer's recommended application circuit.
How do I request a quote and current lead time for CS8421-CZZ?
Use the Request a Quote form on this page to request current pricing, minimum order quantity, stock status, and lead time for the CS8421-CZZ. Because the manufacturer lists the CS8421 as discontinued, include the target quantity, required date, and whether the exact 20-pin TSSOP ordering code is mandatory. The request should also state whether an engineering redesign to a current converter is acceptable.
Can CS8421-CZZ run without an external master clock?
Yes. The CS8421 includes an integrated oscillator and can operate without an external clock when configured for the appropriate operating mode. It also supports fully asynchronous conversion and synchronization to an external data clock. This gives designers three distinct clocking approaches, although the software or hardware control settings must be configured correctly for the intended source and destination rate relationship.

Technische Referenzdaten für CS8421-CZZ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the CS8421-CZZ when maintaining an existing design that requires a 32-bit asynchronous stereo sample-rate converter in a 20-pin TSSOP footprint. Its combination of fully asynchronous operation, external-clock synchronization, integrated-oscillator capability, and 16- through 32-bit audio words is useful when source and destination clocks cannot share a common reference. The main disadvantage is lifecycle risk: Cirrus Logic identifies the CS8421 as discontinued, so availability, traceability, and long-term procurement require confirmation. For new production designs, evaluate current Cirrus Logic or other manufacturers' converters against package, pinout, channel count, serial format, and clocking requirements rather than assuming a related CS84xx device is pin-compatible. If board rework is acceptable, a current converter may provide better lifecycle assurance; if not, confirm the exact obsolete part's condition and supply using the Request a Quote form on this page.

Vergleich mit Alternativen

Parameter Dieses Produkt
Product Type Asynchronous stereo sample-rate converter
Brand Cirrus Logic
Package 20-pin TSSOP
Internal Data Width 32 bit
Maximum Sample Rate 192 kHz
Audio Channels 2 channels (stereo)
Input and Output Data Widths 32 bit, 24 bit, 20 bit, or 16 bit
Clocking Modes Asynchronous, external data-clock synchronous, or integrated oscillator
Supply Voltage Ranges 2.38 V to 2.62 V or 3.14 V to 5.25 V
Temperature Grade Commercial, -10°C to +70°C

Wichtigste Unterscheidungsmerkmale

  • Supports a complete set of asynchronous operating options (vs. CS8416-CZZ)
  • Provides broad digital audio word-length flexibility (vs. CS8420-CSZ)
  • Uses a compact surface-mount package (vs. CS8427-CSR)

Designhinweise

The CS8421 supports both 2.38 V to 2.62 V and 3.14 V to 5.25 V supply conditions. Follow the manufacturer's recommended decoupling network and keep each supply pin close to its local bypass capacitor. Place the input, output, and internal digital-supply return paths in a way that prevents converter switching energy from sharing a noisy return segment with the incoming audio interface.

Route serial audio and clock signals as short, controlled-impedance traces and keep them away from analog or switching-supply nodes. Provide a continuous ground reference beneath the TSSOP footprint. Because the CS8421 supports asynchronous, externally synchronized, and integrated-oscillator modes, leave the required configuration options accessible and avoid adding long stub branches that could degrade clock-edge quality.

Do not treat a related CS84xx converter as a drop-in substitute without comparing its pin assignment, channel count, supported serial formats, clock architecture, and supply requirements. The CS8421-CZZ is obsolete, so check the original board revision and the exact ordering suffix before ordering replacements. Also confirm whether the design relies on asynchronous conversion, external clock synchronization, or the integrated oscillator, because these modes have different control requirements.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer product page identifies the CS8421 as discontinued. Commercial-grade CS8421-CZZ ordering information covers -10°C to +70°C; the CS8421 family also includes automotive-temperature options. Package-specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, MSL, and AEC-Q100 details require confirmation from current manufacturer documentation.

Ähnliche Suchanfragen

cs8421 czz cs8421 datasheet cirrus cs8421 CS8421-CZZ datasheet pdf CS8421-CZZ pinout CS8421-CZZ 20-pin TSSOP CS8421-CZZ 192kHz stereo SRC CS8421-CZZ equivalent CS8421-CZZ replacement CS8421-CZZ price and stock

Verwandte Bauteile & Begriffe

Cirrus Logic CS8421-CZZ CS8421 CS8416-CZZ CS8420-CSZ CS8427-CSR asynchronous sample-rate converter stereo audio converter audio sample-rate conversion digital audio interface 32-bit audio 192 kHz sample rate integrated oscillator asynchronous clocking external data clock PCM audio 20-pin TSSOP TSSOP package family surface-mount device gull-wing lead monolithic CMOS CDB8421 demonstration board digital audio routing professional audio conversion USB audio adapter
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen