CS8421-CZZ - 32-Bit 192kHz Stereo Audio SRC | Cirrus Logic
料号: CS8421-CZZ ✗ 停产CS8421-CZZ 概述
An asynchronous sample-rate converter sits between digital audio domains that do not share the same clock. The CS8421 converts the incoming audio stream to a new sample rate while supporting fully asynchronous operation, synchronization to an external data clock, or operation from its integrated oscillator. This makes it suitable for digital audio equipment, broadcast systems, consumer converters, and test equipment that must reconcile mismatched audio clocks.
The converter uses 32-bit internal processing and supports digital audio word lengths of 16, 20, 24, or 32 bits. Its stereo architecture handles two audio channels in a single package. Input and output interfaces operate from low-voltage digital supply rails, supporting both 2.38 V to 2.62 V and 3.14 V to 5.25 V supply conditions according to the device documentation.
The 20-pin TSSOP package reduces board area compared with larger audio converter packages. Its gull-wing lead geometry supports conventional surface-mount assembly and inspection. Commercial-grade ordering information identifies a temperature range of -10°C to +70°C for this package variant.
Typical uses include asynchronous digital audio routing, sample-rate normalization between playback and recording domains, professional audio conversion, multimedia equipment, and audio processing subsystems. Because the part can operate without an external clock through its integrated oscillator, it also supports clock-independent conversion where a clean external reference is unavailable.
When laying out a design, treat the converter as a precision digital signal-processing block. Keep input and output interface traces short, follow the recommended decoupling arrangement, and provide a stable low-noise supply. Confirm master and slave clock relationships, audio data format, channel assignment, and de-emphasis requirements against the manufacturer pin-description and application guidance before releasing a PCB.
直接替换替代料: CS8421-CZZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: CS8421-CZZ (相同外形与封装尺寸) ——差异在于 Package.
CS8416-CZZ
✅ 直接替换联系询价
查看数据手册 →CS8421-CZZ 最大额定值与电气特性
| Device Type | Asynchronous stereo sample-rate converter |
| Internal Data Width | 32 bit |
| Maximum Sample Rate | 192 kHz |
| Maximum Supported Sample Rate | 211 kHz |
| Audio Channels | 2 channels (stereo) |
| Input Data Widths | 32 bit, 24 bit, 20 bit, or 16 bit |
| Output Data Widths | 32 bit, 24 bit, 20 bit, or 16 bit |
| Operating Principle | Monolithic CMOS |
| Clock Modes | Asynchronous, external data-clock synchronous, or integrated oscillator |
| Integrated Oscillator | Yes |
| Low Supply Voltage Range | 2.38 V to 2.62 V |
| High Supply Voltage Range | 3.14 V to 5.25 V |
| 接口类型 | 3-wire serial |
| 封装 | 20-pin TSSOP |
| Terminal Count | 20 |
| 安装类型 | Surface mount |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Commercial |
| 工作温度范围 | -10°C to +70°C |
| Automotive-Grade Variants | Available in the CS8421 family at -40°C to +85°C and -40°C to +105°C |
| Evaluation Platform | CDB8421 customer demonstration board |
CS8421-CZZ rectangular 引脚配置指南
CS8421-CZZ(rectangular 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: CS8421-CZZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
CS8421-CZZ 适用于 6 应用s: Asynchronous Digital Audio Routing, Professional Digital Audio Converters, Consumer Hi-Fi Network Audio, USB and Digital Audio Adapters, Broadcast and Studio Clock Adaptation, Audio Test and Measurement Equipment.
Asynchronous Digital Audio Routing
The CS8421-CZZ fits systems in which the incoming PCM stream and outgoing audio bus use unrelated clock domains. Its asynchronous stereo conversion mode continuously reconciles the two rates while accepting and producing 16-, 20-, 24-, or 32-bit words. The 32-bit internal architecture preserves headroom for high-resolution audio, while the integrated oscillator provides a fallback when an external master clock is unavailable. Place the converter at the boundary between the two clock domains and verify that the source and destination formats, channel mappings, and serialization timing comply with the manufacturer interface requirements.
推荐
Professional Digital Audio Converters
The CS8421-CZZ is suited to professional and studio-oriented equipment that must normalize sample rates across multiple digital audio sources. Its stereo 32-bit processing supports high-resolution word lengths, and the 192 kHz nominal maximum rate covers high-resolution studio formats. The 20-pin TSSOP package also allows the converter to fit into compact breakout boards and modular audio equipment. In such systems, use the asynchronous mode when source and destination clocks are independent, and confirm supported audio serial formats and clock-output behavior in the manufacturer datasheet.
推荐
Consumer Hi-Fi Network Audio
The CS8421-CZZ can serve as the sample-rate reconciliation stage in a network-audio player that receives PCM from a transport and feeds a DAC operating under a different clock. Fully asynchronous operation avoids forcing the entire system onto one master clock, while 24-bit and 32-bit paths accommodate high-resolution music formats. The integrated oscillator offers an additional implementation option when the transport interface cannot provide a suitable reference. Validate the required I2S-compatible data framing, channel order, and de-emphasis settings against the device's supported interface configurations before finalizing the board.
推荐
USB and Digital Audio Adapters
The CS8421-CZZ is useful in USB audio adapters and digital front ends where audio arrives from a transport with one clock and is converted for a DAC or codec with another. Its 16- through 32-bit word-length flexibility allows a common conversion stage to support multiple source formats. The device's integrated oscillator and three operating modes help designers accommodate asynchronous, synchronous, and clock-independent architectures. The TSSOP-20 footprint reduces board area, but the design must still provide clean supply decoupling and properly terminated digital interfaces.
推荐
Broadcast and Studio Clock Adaptation
The CS8421-CZZ can bridge digital audio sources with incompatible sampling clocks in broadcast monitoring and studio signal-chain equipment. Its asynchronous stereo architecture supports conversion up to a 192 kHz nominal rate while maintaining selectable 16-, 20-, 24-, or 32-bit data paths. The integrated oscillator is helpful when a transport does not expose a usable master clock. For dependable operation, derive the correct operating mode from the control interface and validate the converter against the studio clocking and digital-audio format standards used by the target equipment.
推荐
Audio Test and Measurement Equipment
The CS8421-CZZ is appropriate for test systems that must present audio data at a sample rate different from the incoming stream. Its ability to run asynchronously or from an integrated oscillator makes it useful for standalone conversion fixtures and automated audio test platforms. The 32-bit processing and support for 16- through 32-bit words accommodate both conventional and high-resolution test vectors. Because the part is obsolete, test-equipment designers should also evaluate current converters when building new platforms, while the CS8421 remains useful for maintaining and reproducing existing designs.
推荐
推荐产品汇总
工程参考数据: CS8421-CZZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Product Type | Asynchronous stereo sample-rate converter |
| Brand | Cirrus Logic |
| Package | 20-pin TSSOP |
| Internal Data Width | 32 bit |
| Maximum Sample Rate | 192 kHz |
| Audio Channels | 2 channels (stereo) |
| Input and Output Data Widths | 32 bit, 24 bit, 20 bit, or 16 bit |
| Clocking Modes | Asynchronous, external data-clock synchronous, or integrated oscillator |
| Supply Voltage Ranges | 2.38 V to 2.62 V or 3.14 V to 5.25 V |
| Temperature Grade | Commercial, -10°C to +70°C |
关键差异点
- Supports a complete set of asynchronous operating options (对比 CS8416-CZZ)
- Provides broad digital audio word-length flexibility (对比 CS8420-CSZ)
- Uses a compact surface-mount package (对比 CS8427-CSR)
设计说明
The CS8421 supports both 2.38 V to 2.62 V and 3.14 V to 5.25 V supply conditions. Follow the manufacturer's recommended decoupling network and keep each supply pin close to its local bypass capacitor. Place the input, output, and internal digital-supply return paths in a way that prevents converter switching energy from sharing a noisy return segment with the incoming audio interface.
Route serial audio and clock signals as short, controlled-impedance traces and keep them away from analog or switching-supply nodes. Provide a continuous ground reference beneath the TSSOP footprint. Because the CS8421 supports asynchronous, externally synchronized, and integrated-oscillator modes, leave the required configuration options accessible and avoid adding long stub branches that could degrade clock-edge quality.
Do not treat a related CS84xx converter as a drop-in substitute without comparing its pin assignment, channel count, supported serial formats, clock architecture, and supply requirements. The CS8421-CZZ is obsolete, so check the original board revision and the exact ordering suffix before ordering replacements. Also confirm whether the design relies on asynchronous conversion, external clock synchronization, or the integrated oscillator, because these modes have different control requirements.
合规信息
The manufacturer product page identifies the CS8421 as discontinued. Commercial-grade CS8421-CZZ ordering information covers -10°C to +70°C; the CS8421 family also includes automotive-temperature options. Package-specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, MSL, and AEC-Q100 details require confirmation from current manufacturer documentation.