CSB-01 - 850/1900 MHz Cellular Signal Booster | Taoglas
Teilenummer: CSB-01 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
CSB-01 Übersicht
A cellular signal booster (also called a bi-directional amplifier, BDA, or repeater) is an RF subsystem that captures weak outdoor cellular signals with a donor antenna, amplifies them, and re-radiates the boosted signal indoors through a coverage antenna. The CSB-01 belongs to the RF module family within RF & Wireless subsystems, sitting between the antenna infrastructure and the cellular handset or modem it serves.
Key features include dual-band 850/1900 MHz operation covering the North American 2G/3G voice and data spectrum, microprocessor-controlled automatic gain and oscillation detection, integrated band-pass filtering to suppress out-of-band interference, and SMA female RF connectors for easy integration into existing coaxial cable runs. The unit is typically enclosed in a shielded metal housing to provide EMI isolation between the donor and coverage paths.
The CSB-01 uses a software-controlled feedback architecture that continuously monitors the uplink and downlink paths for instability, automatically reducing gain or shutting down the affected band if feedback oscillation is detected. This automatic gain control (AGC) and oscillation-shutdown feature enables compliance with FCC Part 20 rules for consumer-signal boosters, which require self-monitoring to prevent the booster from interfering with the carrier network.
Typical applications include residential in-building cellular coverage, small office SOHO coverage, basement and below-grade coverage, remote cabin or vacation home signal extension, and vehicle/RV mobile booster systems. The dual-band 850/1900 MHz coverage supports legacy AT&T, Verizon, T-Mobile, and Sprint 2G/3G voice and HSPA/CDMA data services throughout North America.
When designing with the CSB-01, plan the antenna isolation between the outdoor donor antenna and the indoor coverage antenna carefully. Insufficient isolation causes feedback oscillation that will trigger the automatic gain reduction; aim for at least 20 dB of physical separation or vertical/horizontal isolation. Power the unit from a clean +12 VDC supply rated for at least 1 A continuous current.
This page synthesizes distributor inventory, dual-band specifications, and application guidance not consolidated in the Taoglas datasheet, giving cellular equipment installers and product designers a single reference for evaluating the CSB-01.
Drop-in-Alternativen für CSB-01 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
CSB.01.A.001
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CSB-01-A-001
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CSB-01 Grenzwerte & elektrische Eigenschaften
| Product Type | Cellular Signal Booster / Bi-directional RF Amplifier |
| Supported Frequency Bands | 850 MHz (Cellular) and 1900 MHz (PCS) |
| Geographic Coverage | North American 2G/3G networks |
| Architecture | Microprocessor-controlled, bi-directional |
| RF Connectors | SMA female (donor and coverage ports) |
| Automatic Gain Control (AGC) | Yes |
| Oscillation Detection / Shutdown | Yes (self-monitoring per FCC Part 20) |
| Supported Carrier Services | 2G/3G voice, CDMA, GSM, HSPA, UMTS |
| Enclosure | Shielded metal housing |
| Versorgungsspannung | +12 VDC nominal (typical) |
| Compliance | FCC Part 20 (consumer signal booster ruleset) |
| RoHS-Status | Compliant (per Taoglas product page) |
CSB-01 standard Pinbelegungsleitfaden
Pinbelegung für CSB-01 (standard-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für CSB-01.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
CSB-01 ist geeignet für 6 Anwendungs: Residential In-Building Cellular Coverage, Small Office / SOHO Coverage, Below-Grade / Basement Coverage, Remote Cabin / Vacation Home Coverage, Vehicle / RV Mobile Booster, M2M / IoT Endpoint Coverage Extension.
Residential In-Building Cellular Coverage
The Taoglas CSB-01's 850/1900 MHz dual-band coverage and FCC Part 20 self-monitoring make it well suited to residential in-building coverage where a single booster can serve both AT&T HSPA and Verizon CDMA simultaneously. Installed with an outdoor donor yagi and an indoor coverage panel, it typically delivers 60-70 dB of usable gain and reduces dropped calls by improving edge-of-cell signal by 2-3 bars. The microprocessor-controlled AGC prevents oscillation even when the homeowner's antenna placement is suboptimal, simplifying installer setup.
Empfohlen
Small Office / SOHO Coverage
Small offices with 5-15 staff often suffer poor indoor cellular coverage despite strong outdoor signals blocked by Low-E glass. The CSB-01's automatic oscillation shutdown ensures safe co-location with the building's indoor antenna system, while its 850/1900 MHz band coverage supports legacy AT&T and Verizon voice/data devices still common in office phones and older IoT terminals. Power consumption under 1 A at +12 VDC keeps it compatible with small UPS-backed DC supplies.
Empfohlen
Below-Grade / Basement Coverage
Concrete and rebar in basements and parking structures attenuate 850/1900 MHz signals by 20-30 dB, often rendering indoor cellular unusable. A CSB-01 donor antenna placed outdoors with coax run down to a basement-mounted booster and ceiling coverage antenna restores usable voice and 3G data service for utility rooms, equipment closets, and below-grade retail. The shielded metal housing tolerates dusty, humid below-grade environments when mounted in a NEMA enclosure.
Empfohlen
Remote Cabin / Vacation Home Coverage
Remote cabins and vacation homes at the edge of cellular coverage benefit from the CSB-01's high-gain amplification of weak 850/1900 MHz signals. A rooftop yagi donor antenna feeding the CSB-01 through low-loss coax (LMR-400 or equivalent) can extend usable coverage to locations where the outdoor signal is below -90 dBm. The +12 VDC supply can be backed by a small solar/battery system for off-grid installations.
Empfohlen
Vehicle / RV Mobile Booster
The compact form factor and +12 VDC supply of the CSB-01 make it adaptable to RV and over-the-road vehicle installations where the moving vehicle frequently moves between coverage zones. Mounted in an interior cabinet with an exterior magnetic-mount donor antenna and an interior patch antenna, it provides continuous 850/1900 MHz coverage as the vehicle moves. The AGC reacts quickly to changing outdoor signal levels without requiring user intervention.
Empfohlen
M2M / IoT Endpoint Coverage Extension
Legacy M2M endpoints (utility meters, alarm panels, vending telemetry) often rely on 2G/3G radios that only support 850 or 1900 MHz bands, and these devices can fail in metal-clad or shielded installations. A CSB-01 booster at the site extends usable coverage to indoor endpoints without requiring a cellular modem swap or carrier SIM update. The microprocessor-controlled oscillation shutdown protects against feedback if the indoor antenna is placed too close to the donor antenna in compact equipment cabinets.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CSB-01 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CSB.01.A.001 | CSB-01-A-001 |
|---|---|---|---|
| Package | Enclosed RF Module with SMA-F connectors | Enclosed RF Module with SMA-F connectors - same | Enclosed RF Module with SMA-F connectors - same |
| Brand | Taoglas | Taoglas | Taoglas |
| Frequency Bands | 850 MHz + 1900 MHz (dual-band) | 850 MHz + 1900 MHz - same | 850 MHz + 1900 MHz - same |
| Geographic Coverage | North American 2G/3G | North American 2G/3G - same | North American 2G/3G - same |
| Microprocessor Control | Yes (AGC + oscillation detection) | Yes - same | Yes - same |
| RF Connectors | SMA female | SMA female - same | SMA female - same |
| Part Number Form | Distributor storefront alias (CSB-01) | Manufacturer orderable P/N | Third-party SKU alias |
| Datasheet | CSB.01.A.001 datasheet (same document) | Same document - identical | Same document - identical |
Wichtigste Unterscheidungsmerkmale
- Dual-band 850/1900 MHz in a single integrated enclosure (vs. Single-band boosters (850 MHz only or 1900 MHz only))
- FCC Part 20 self-monitoring (AGC + oscillation detection) (vs. Non-compliant legacy boosters without microprocessor control)
- Shielded metal enclosure with integrated SMA-F connectors (vs. Open-board booster modules)
Designhinweise
Estimated: Always register the CSB-01 with the relevant wireless carrier (AT&T, Verizon, T-Mobile) before activation. Per FCC Part 20 consumer-signal-booster rules, unregistered operation can trigger carrier-side network protection shutdown that blocks all booster-served devices. Registration is a free online process at each carrier's booster portal and must include the booster's FCC ID and serial number.
Estimated: Achieve at least 20 dB of physical isolation between the outdoor donor antenna and the indoor coverage antenna. Vertical separation (donor on roof, coverage in basement) typically provides 25-30 dB; horizontal separation with metal building structure (foil-faced insulation, metal roof) often provides 20-25 dB. Insufficient isolation triggers the CSB-01's automatic oscillation shutdown, reducing gain to prevent carrier-network interference.
Estimated: Use a clean +12 VDC regulated supply rated for at least 1 A continuous. The CSB-01's RF power amplifiers draw the highest current when both 850 and 1900 MHz bands are at maximum uplink gain simultaneously. A supply with poor load-transient response can cause gain fluctuations that the AGC interprets as oscillation, triggering false shutdowns.
Estimated: Use LMR-400 (or equivalent low-loss 50-ohm coax) for runs longer than 5 m between the antennas and the CSB-01. At 1900 MHz, RG-58 loses approximately 1 dB per meter, which can negate a substantial portion of the booster's gain budget and force the AGC into reduced-gain operation. Keep coax runs as short as mechanically possible.
Compliance-Informationen
RoHS and REACH compliant per Taoglas product page. FCC Part 20 certified for consumer signal booster operation. Not automotive grade (AEC-Q100 N/A).
