CY8C3444PVI-103 - PSoC 3 8-Bit 50MHz 16KB Flash MCU | Infineon
Teilenummer: CY8C3444PVI-103 ✓ AktivCY8C3444PVI-103 Übersicht
A microcontroller is a programmable system-on-chip that integrates a CPU core, memory and peripherals on a single die. The PSoC 3 (Programmable System-on-Chip) family extends the classic 8051 concept with a programmable analog and digital peripheral block, capacitive-sensing capability, and on-chip resources that reduce the external discrete count in touch, control and industrial sensor nodes. In the supplier hierarchy, this device belongs to the 8-bit microcontroller class, itself part of the embedded processor and embedded systems integration family.
Key differentiating specifications are the 50 MHz operating clock, which gives roughly six times the throughput of the classic 12 MHz 8051 core and allows real-time control loops to execute without offloading to external logic; the 16 KB flash program memory, which holds the application firmware plus boot and configuration data; and the 48-SSOP footprint, which keeps the board area small enough for cost-optimized multi-function panels and compact control modules.
Technically, the part sits in the CY8C34xx performance range, pairing a pipelined 8051 core with a digital peripheral set and analog blocks that can be routed through programmable interconnect. Because the core is 8-bit while the clock is 50 MHz, software designers use byte-oriented architectures with code executed from flash, and the on-chip SRAM serves as the working memory for stack, buffers and peripheral descriptors. The device is also a supported target for industry-standard ISP and SWD programmers, which simplifies production programming.
Typical applications include capacitive-touch control panels for white goods and industrial HMI, small motor and valve controllers, compact sensor-hub nodes, LED lighting controllers, battery-powered remote controls and low-cost USB-to-embedded bridges. In each of these the 50 MHz headroom lets one device absorb several peripheral functions that previously required separate glue logic.
Design considerations center on decoupling and layout. Place the bulk and high-frequency ceramic capacitors directly at the supply pins, keep the analog supply path short and isolated from switching return currents, and route SWD programming signals away from noisy analog nets. Because flash and SRAM sizes are modest, plan the firmware partition and buffer usage early; if a design needs larger RAM or USB host support, step up to a higher-density member of the CY8C34xx family rather than adding external memory.
This page consolidates distributor availability and pricing context, pin-compatible drop-in alternatives, and practical design guidance that engineers rarely find in a single place, so you can evaluate the CY8C3444PVI-103 against equivalent 8-bit MCU options before committing a layout.
Drop-in-Alternativen für CY8C3444PVI-103 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit CY8C3444PVI-103 (gleiche Bauform und Footprint) – abweichend in Package, Flash Memory, Product Type.
CY8C3444PVA-103
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CY8C3444PVI-100
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →CY8C3444PVA-100
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
CY8C3442PVI-103
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
CY8C3445PVI-103
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
CY8C3444PVI-103 Grenzwerte & elektrische Eigenschaften
| Product Family | PSoC 3 (CY8C34xx) |
| CPU Core | 8051-compatible 8-bit core |
| Bit Width | 8 bit |
| Maximum CPU Frequency | 50 MHz |
| Flash Program Memory | 16 KB (16K x 8) |
| Gehäuse | 48-SSOP |
| Montageart | Surface mount |
| Ordering Code Suffix | -103 temperature grade option |
| Programming Interface | ISP / SWD (in-circuit programming) |
| Lebenszyklusstatus | Active, orderable |
CY8C3444PVI-103 48-ssop Pinbelegungsleitfaden
Pinbelegung für CY8C3444PVI-103 (48-ssop-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für CY8C3444PVI-103.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
CY8C3444PVI-103 ist geeignet für 6 Anwendungs: Capacitive Touch Control Panels, Small Motor and Valve Controllers, Industrial Sensor Hub Nodes, White Goods and Appliance Control, LED Lighting Controllers, Battery-Powered Remote and IoT Controls.
Capacitive Touch Control Panels
The CY8C3444PVI-103 suits capacitive-touch front ends because the PSoC 3 architecture places programmable analog blocks and digital peripherals behind the same 8051-compatible core, so the touch-sensing scan engine, key debounce and UI response all run on one device. At up to 50 MHz the 8-bit core has enough instruction bandwidth to sample several capacitive channels while servicing interrupts and driving the indicator LEDs. Compared with a discrete touch controller plus host MCU, this integration removes a package, shrinks the board and lowers the BOM line count. Keep the charge-transfer or scan network on a separate analog island with its own local decoupling, and verify the supported channel count against the datasheet before finalising the panel geometry.
Empfohlen
Small Motor and Valve Controllers
For compact stepper, valve and solenoid drivers, the CY8C3444PVI-103 provides the control bandwidth of a 50 MHz 8051-compatible core plus the programmable digital peripheral blocks needed to time commutation sequences and drive a MOSFET gate stage. Positioning the part between the command input and the power stage keeps real-time timing loops deterministic without a separate timer IC. The 48-SSOP footprint keeps the controller area small enough to sit behind the actuator rather than on a central board. Design for the noise environment of a motor bay: isolate the gate-drive return path from the analog supply, and keep the SWD programming lines short and away from the switching node.
Empfohlen
Industrial Sensor Hub Nodes
The CY8C3444PVI-103 works as a compact sensor hub that polls mixed analog and digital sensors, applies filtering, and forwards results over a serial link. Its 50 MHz clock allows oversampling of slow sensors plus protocol handling on a single core, while the PSoC 3 programmable analog block can be configured to condition inputs without external op-amps. The 48-SSOP package fits a DIN-rail or inline enclosure without competing with the sensor itself. Keep the hub low-power by running the core at the lowest frequency that meets the polling interval, and enable sleep modes between bursts; verify the average current in the datasheet before sizing the power budget.
Empfohlen
White Goods and Appliance Control
Appliance control boards typically combine a user interface, motor or relay sequencing, and temperature sensing on a single low-cost PCB, which is exactly where the CY8C3444PVI-103 consolidates functions. Its 8-bit core at 50 MHz handles button matrix scanning, relay timing and sensor polling without the cost of a 32-bit MCU, and the 48-SSOP package suits high-volume through-hole or fine-pitch mixed assembly. Compared with three separate 8-bit controllers, the integrated approach simplifies firmware maintenance and reduces the number of programming operations in manufacturing. For appliance-grade robustness, derate the supply rails for motor transients and keep the on-board regulator's ground return separate from relay coil returns.
Empfohlen
LED Lighting Controllers
LED driver controllers need accurate current timing, dimming updates and fault reporting at a refresh rate that is comfortable rather than marginal. The 50 MHz clock of the CY8C3444PVI-103 leaves processing headroom for PWM dimming resolution, temperature compensation and inter-panel communication, all on an 8-bit core that keeps the BOM cost low for volume lighting products. The 48-SSOP outline allows the controller to sit next to the LED driver stage instead of in a separate enclosure. Design considerations are similar to any switching-adjacent board: keep the LED current return path separate from the MCU supply ground, and use the analog supply pins exclusively for the sensing chain.
Empfohlen
Battery-Powered Remote and IoT Controls
Battery-operated handsets and small IoT controls benefit from an 8-bit core that can be clock-gated aggressively and placed into deep sleep between transmissions. The CY8C3444PVI-103 delivers enough 50 MHz headroom to compress protocol handling and sensor sampling into short active bursts, while the 48-SSOP package keeps the assembled board small enough for a slim remote or a sealed sensor node. The trade-off to plan for is program memory: 16 KB of flash limits firmware size, so structure the code with a compact driver layer and avoid large lookup tables, or step up within the same family when the feature set grows.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CY8C3444PVI-103 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CY8C3444PVA-103 | CY8C3444PVI-100 | CY8C3444PVA-100 | CY8C3442PVI-103 | CY8C3445PVI-103 |
|---|---|---|---|---|---|---|
| Package | 48-SSOP | 48-SSOP - same footprint | 48-SSOP - same footprint | 48-SSOP - same footprint | 48-SSOP - same footprint | 48-SSOP - same footprint |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| CPU Architecture | 8051-compatible 8-bit core | 8051-compatible 8-bit core | 8051-compatible 8-bit core | 8051-compatible 8-bit core | 8051-compatible 8-bit core | 8051-compatible 8-bit core |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Temperature Grade Option | -103 extended grade option | -103 extended grade option | -100 standard grade option | -100 standard grade option | -103 extended grade option | -103 extended grade option |
| Programming Interface | ISP / SWD in-circuit programming | ISP / SWD in-circuit programming | ISP / SWD in-circuit programming | ISP / SWD in-circuit programming | ISP / SWD in-circuit programming | ISP / SWD in-circuit programming |
| Product Family | PSoC 3 (CY8C34xx) | PSoC 3 (CY8C34xx) | PSoC 3 (CY8C34xx) | PSoC 3 (CY8C34xx) | PSoC 3 (CY8C34xx) | PSoC 3 (CY8C34xx) |
Wichtigste Unterscheidungsmerkmale
- Consolidates touch/analog sensing and real-time control on one 8-bit core (vs. CY8C3444PVI-100)
- Identical key parameters with a different package ordering code for dual sourcing (vs. CY8C3444PVA-103)
- Memory density headroom without changing the footprint or tool chain (vs. CY8C3442PVI-103)
- Compact 48-SSOP footprint with 50 MHz performance (vs. CY8C3445PVI-103)
Designhinweise
Place the bulk supply capacitor and a 100 nF high-frequency ceramic capacitor directly at the device supply pins, with the shortest possible trace between them. In a PSoC 3 design the analog supply path should be kept separate from the digital supply and from switching return currents, so that sensor conditioning and touch scanning are not disturbed by relay, motor or LED driver noise. Add local filtering at the power entry point and keep the ground return of the analog section referenced to a single quiet point near the device.
The 48-SSOP footprint is fine-pitch and sensitive to solder-paste printing. Match the land pattern to the manufacturer recommended footprint, verify pad and courtyard dimensions against your PCB library, and consider a two-stage or stepped stencil if the pin pitch is at the limit of your assembly house's capability. Keep the SWD programming header on the board edge or provide test pads so production programming does not require fixture access to inner signals, and route SWCLK and SWDIO away from analog input nets.
Two mistakes recur with this class of 8-bit MCU. First, firmware is often written assuming a 12 MHz 8051 and then run at 50 MHz without correcting timer reload values, baud-rate divisors or delay loops, which produces subtle timing faults; recalculate every constant when the clock is changed. Second, the 16 KB flash budget is easily exceeded by large tables and libraries, so partition the code, enable compiler optimisation, and step up within the CY8C34xx family when linker output reports overflow instead of removing application features.
In capacitive-sensing or analog measurement designs, the sense lines are high-impedance nodes and any leakage or injected noise shows up directly in the reading. Guard the analog island on all layers, keep the sense traces short and away from the SWD and switching paths, and provide a solid ground plane reference beneath the analog section. Because the 8-bit core quantises results, apply averaging in firmware rather than relying on gain alone, and confirm the input range stays inside the analog block limits before choosing resistor divider values.
Compliance-Informationen
No explicit RoHS, REACH or conflict-minerals declarations were found for this MPN; the PVI package code indicates a lead-free assembly option, which must be confirmed against the manufacturer declarations. AEC-Q100 qualification does not apply to this industrial/consumer 8-bit MCU.