CY8C3444PVI-118 8-Bit 50MHz 8051 MCU 16KB Flash
Teilenummer: CY8C3444PVI-118 ✓ AktivCY8C3444PVI-118 Übersicht
A PSoC, or Programmable System-on-Chip, is a microcontroller architecture that integrates a CPU with configurable digital and analog peripheral blocks into one device. The 8051-compatible core provides a familiar instruction set and deterministic embedded-control behavior, while the programmable blocks can be adapted to functions such as timers, serial interfaces, analog conversion, and signal conditioning. This integration can reduce external discrete circuitry and simplify firmware development compared with a fixed-function MCU design.
The CY8C3444PVI-118 is specified for operation from 1.71V to 5.5V, making it suitable for low-voltage industrial, consumer, appliance, and embedded-control systems. Its 16KB flash memory provides on-chip program storage, while the 50MHz maximum operating frequency supports time-sensitive control tasks and peripheral activity. The 48-SSOP package is intended for surface-mount PCB assembly and is appropriate where a compact, low-profile component is required.
The PSoC 3 family uses a mixed-signal design approach in which digital and analog resources are configured through programmable registers and device configuration tools. Designers should assign resources according to the required peripherals, timing budget, analog signal levels, and external component values. Firmware configuration and application code are normally developed with the manufacturer’s PSoC design environment and programming tools, so tool support and the required peripheral configuration should be checked before committing to the device.
Typical uses include sensor conditioning, motor and actuator control, industrial interface modules, consumer appliances, building equipment, and compact embedded products. The 8051-compatible architecture is particularly useful for engineers migrating from conventional 8-bit systems while retaining familiar programming concepts. The wide supply range also supports systems using regulated 1.8V, 2.5V, 3.3V, or 5V rails, although the external clock, reset, and peripheral circuits must match the selected operating conditions.
For PCB implementation, route power and ground carefully, place decoupling capacitors close to the supply pins, and follow the manufacturer’s recommended pin and thermal-layout guidance. Confirm the exact SSOP footprint and exposed-pad requirements against the package drawing before release. Because this page summarizes catalog information, final production decisions should be checked against the current manufacturer datasheet and the device’s detailed electrical and timing specifications.
This page provides practical sourcing context around the CY8C3444PVI-118, including its core architecture, supply range, memory configuration, package format, application fit, and engineering trade-offs. It also distinguishes exact catalog variants from broader functional replacements, helping engineers identify when a same-family option is appropriate and when a full firmware, pin, or peripheral review is required.
Drop-in-Alternativen für CY8C3444PVI-118 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
CY8C3444PVA-118
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CY8C3444PVE-118
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CY8C3444PVI-118 Grenzwerte & elektrische Eigenschaften
| Product Type | 8-bit PSoC 3 microcontroller |
| CPU Core | 8051-compatible 8-bit core |
| Maximum Operating Frequency | 50 MHz |
| Program Memory | 16KB flash |
| Program Memory Organization | 16K x 8 bits |
| Operating Supply Voltage Range | 1.71V to 5.5V |
| Gehäuse | 48-SSOP |
| Montageart | Surface mount |
| Microcontroller Category | 8-bit embedded microcontroller |
| Architecture | PSoC 3 mixed-signal programmable system-on-chip |
| Digital and Analog Resources | Programmable PSoC 3 peripheral blocks |
| RoHS-Status | ROHS3 compliant |
| Manufacturer | Infineon Technologies |
| Datasheet Package Description | 48-SSOP |
CY8C3444PVI-118 48-ssop Pinbelegungsleitfaden
Pinbelegung für CY8C3444PVI-118 (48-ssop-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für CY8C3444PVI-118.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
CY8C3444PVI-118 ist geeignet für 6 Anwendungs: Industrial Sensor Conditioning, Motor and Actuator Control, Consumer Appliance Control, Building Equipment Interface, Data Acquisition Module, Portable Embedded Product.
Industrial Sensor Conditioning
The CY8C3444PVI-118 fits compact sensor-conditioning modules that must combine acquisition, filtering, thresholding, and control in one device. Its programmable PSoC 3 resources can reduce the need for separate analog and timer components, while the 8-bit 8051-compatible core handles control logic at up to 50MHz. The 1.71V to 5.5V range supports low-voltage sensor systems and regulated 3.3V or 5V industrial rails. Design engineers should allocate the analog and digital blocks around the sensor bandwidth, select external conditioning components from the datasheet, and verify operating-temperature requirements before production.
Empfohlen
Motor and Actuator Control
The CY8C3444PVI-118 can serve as the digital controller in compact motor, solenoid, or actuator modules where deterministic timing and configurable peripherals are important. Its 50MHz maximum operating frequency supports responsive control-loop execution, and PSoC 3 programmable resources can be assigned to timers, pulse generation, capture functions, and communications. The 48-SSOP package assists compact board layouts, while the 1.71V to 5.5V supply range permits operation from low-voltage power systems. Confirm output-drive ratings, timer limits, thermal conditions, and external driver requirements in the device documentation.
Empfohlen
Consumer Appliance Control
The CY8C3444PVI-118 is suitable for compact appliance controllers that coordinate user inputs, displays, sensors, relays, and communication interfaces. Its 16KB flash provides program storage for modest control applications, while the PSoC 3 programmable architecture allows peripherals to be tailored instead of relying on a fixed block set. The 1.71V to 5.5V operating range accommodates common low-voltage appliance rails. Designers should assess flash usage, startup behavior, brownout requirements, pin multiplexing, and EMC layout, and should validate the final configuration against the manufacturer datasheet.
Empfohlen
Building Equipment Interface
The CY8C3444PVI-118 can implement local control and communication for building-automation modules, actuator nodes, and equipment interfaces. Programmable PSoC 3 blocks allow designers to configure serial communication, timing, and signal functions around a common 8051-compatible core, reducing board area in distributed systems. The 48-SSOP package supports compact surface-mount assemblies, and operation from 1.71V to 5.5V provides flexibility for low-energy nodes. For deployed products, check temperature limits, communication timing, watchdog behavior, bus levels, and regulatory requirements before selecting it.
Empfohlen
Data Acquisition Module
The CY8C3444PVI-118 is a potential fit for compact data-acquisition front ends that require configurable analog conditioning, digital filtering, and local control. Its mixed-signal PSoC 3 architecture can place acquisition and processing functions close to the sensor, reducing analog routing distance and system complexity. The 50MHz core supports digital signal and control tasks, while the 1.71V to 5.5V range supports multiple rail arrangements. Exact ADC resolution, input limits, sampling performance, and programmable-block allocation require confirmation in the manufacturer datasheet before signal-chain sign-off.
Empfohlen
Portable Embedded Product
The CY8C3444PVI-118 suits compact battery-powered accessories that combine touch or sensor input, local indication, and serial control. Its low-voltage operation from 1.71V to 5.5V helps designers select efficient system rails, while the 48-SSOP package supports space-constrained boards. The 8-bit architecture is appropriate for low-complexity user-interface and control tasks, and PSoC 3 programmability can reduce discrete component count. Validate quiescent-current behavior, brownout thresholds, startup sequencing, flash retention, and ESD requirements for the finished portable product.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CY8C3444PVI-118 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CY8C3444PVA-118 | CY8C3444PVE-118 |
|---|---|---|---|
| Brand | Infineon | Infineon | Infineon |
| Package | 48-SSOP | 48-SSOP | 48-SSOP |
| Product Type | 8-bit PSoC 3 microcontroller | 8051 PSoC 3 microcontroller | 8051 PSoC 3 microcontroller |
| CPU Core | 8-bit 8051-compatible core | 8-bit 8051 core | 8-bit 8051 core |
| Maximum Operating Frequency | 50 MHz | 50 MHz | 50 MHz |
| Programmable Mixed-Signal Architecture | PSoC 3 programmable digital and analog blocks | PSoC 3 programmable architecture | PSoC 3 programmable architecture |
Wichtigste Unterscheidungsmerkmale
- Programmable mixed-signal integration (vs. CY8C3444PVA-118)
- Direct 8051-compatible control platform (vs. CY8C3444PVE-118)
- Wide low-voltage operating range (vs. CY8C3444PVA-118)
Designhinweise
Use the manufacturer 48-SSOP footprint and land pattern, then place all required decoupling capacitors close to the corresponding power pins. Keep sensitive analog inputs away from switching-node and high-current return paths, and provide a continuous ground reference beneath the device where the package drawing permits. Confirm pin numbering directly from the datasheet because the SSOP orientation and pin-1 location determine assembly correctness.
The CY8C3444PVI-118 operates across a 1.71V to 5.5V range, but the usable internal resource set and external component values can depend on the selected voltage. Select the system rail with margin for startup, transient response, and peripheral current. Validate brownout behavior and power-supply sequencing in the complete configuration rather than assuming that every PSoC peripheral is available under all supply conditions.
Reserve the programming interface, reset circuitry, clock components, and any manufacturer-recommended external passive network before fixing the PCB layout. PSoC 3 designs can require specific programming-pad geometry and boot configuration handling. Keep firmware update access practical for manufacturing and field service, and verify that exposed test points do not interfere with high-speed or sensitive analog routing.
Do not treat a shared 48-SSOP package as proof that every CY8C3444 order code is an automatic substitute. Compare temperature grade, qualification, clock options, peripheral resources, flash organization, and the complete pin table. The PVI, PVA, and PVE order codes should be reviewed through the manufacturer ordering guide before changing a released design.
Compliance-Informationen
A catalog result identifies the CY8C3444PVI-118 as ROHS3 compliant. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified.