Cypress Semiconductor

CY8C3445PVI-077 - 8-Bit 32KB Flash PSoC 3 | Cypress

Teilenummer: CY8C3445PVI-077 ✓ Aktiv
1.71V to 5.5V Vdss 48-BSSOP Package 50MHz Speed 32KB Memory
MOQ: 1 |

CY8C3445PVI-077 Übersicht

The Cypress Semiconductor CY8C3445PVI-077 is an 8-bit PSoC 3 programmable system-on-chip with 32KB of embedded flash memory in a 48-BSSOP surface-mount package. It combines an 8051-compatible microcontroller core with configurable analog and digital peripheral blocks, allowing signal acquisition, processing, and control functions to be integrated into one device. The package is specified at 7.50 mm wide and 0.295 inch nominal body width.

A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that places a CPU, programmable analog blocks, digital logic, and programmable I/O on a single integrated circuit. Within the semiconductor hierarchy, this device belongs to the embedded-processor and microcontroller category rather than a general-purpose logic IC or fixed-function analog component. Its configurable peripheral structure can replace several discrete analog, timer, counter, and interface functions around a conventional 8051-class controller.

The CY8C3445PVI-077 belongs to the CY8C34 family documented under datasheet 001-53304. The family provides 32KB flash and 4KB SRAM, while its configurable blocks support analog-to-digital conversion, digital-to-analog conversion, timers, counters, serial communications, and programmable interrupt handling. Because the peripheral behavior is configured in firmware, engineers can adapt signal-chain functions without changing the physical PCB when requirements change.

The PSoC 3 architecture combines an 8051-compatible processing core with a fabric of programmable analog and digital blocks. Analog blocks can implement functions such as amplifiers, analog buffers, comparators, and converters, while digital blocks provide timing, counters, serial communication, and programmable logic. This architecture supports deterministic embedded control while reducing the number of external components required around a microcontroller.

Typical uses for the CY8C3445 family include industrial sensing and control, consumer product interfaces, instrumentation, communication modules, and compact embedded control systems. A designer can use the integrated analog resources for sensor conditioning or signal acquisition and assign programmable digital blocks to timers, communication protocols, or control functions.

The primary design consideration is firmware and peripheral configuration. Before assigning pins, use the device pin-description table and package drawing in the manufacturer datasheet. Decoupling, grounding, programming-interface access, and unused input handling should follow the recommended application circuit, while clock and analog performance should be validated with the selected PSoC configuration.

Drop-in-Alternativen für CY8C3445PVI-077 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit CY8C3445PVI-077 (gleiche Bauform und Footprint) – abweichend in Package, Mounting Type, SRAM, Device Type, Processor Core.

Infineon
Package: 48-pin SSOP
SRAM: 4 kByte
Processor Core: 8-bit 8051
Vergleichen mit CY8C3445PVI-077 →
Infineon
Package: 48-SSOP
Mounting Type: Through-hole leaded SMD package
SRAM: 4 kByte
Vergleichen mit CY8C3445PVI-077 →

CY8C3445PVI-088

✅ Drop-In
Infineon
📦 48-BSSOP
Flash-programmable system-on-chip microcontroller · CY8C34 / PSoC 3 · 8-bit 8051 · 50 MHz · 32 KB · 4 kByte · 1.71 V to 5.5 V · 48-pin SSOP

Preis auf Anfrage

Datenblatt ansehen →

CY8C3445PVI-094

✅ Drop-In
Infineon
📦 48-BSSOP
8-bit PSoC 3 microcontroller · 8051 · 50 MHz · 32 kByte Flash · 32K x 8 bits · 4 kByte · 1 kByte · 1.71 V to 5.5 V

Preis auf Anfrage

Datenblatt ansehen →

CY8C3445PVI-077 Grenzwerte & elektrische Eigenschaften

Device Type 8-bit programmable system-on-chip microcontroller
Series PSoC 3 CY8C34 family
Processor Core 8051-compatible core
Program Flash 32KB
SRAM 4KB
Maximum Clock Frequency for CY8C3445PVI-094 50MHz
Supply Voltage Range for CY8C3445PVI-088 1.71V to 5.5V
Programmable Analog Blocks Configurable analog signal-acquisition and processing blocks
Programmable Digital Blocks Configurable timers, counters, serial communication, and programmable logic blocks
Gehäuse 48-BSSOP
Package Width 7.50mm
Package Body Width 0.295inch
Montageart Surface mount
Programming Interface ISP-SWD

CY8C3445PVI-077 0.295inch Pinbelegungsleitfaden

Pinbelegung für CY8C3445PVI-077 (0.295inch-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für CY8C3445PVI-077 im 0.295inch-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für CY8C3445PVI-077.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

CY8C3445PVI-077 ist geeignet für 6 Anwendungs: Industrial Sensor Acquisition, Programmable Measurement Front End, Embedded Communication Controller, Consumer Product Interface Controller, Compact Instrumentation Control, Battery-Powered Embedded Controller.

🏭

Industrial Sensor Acquisition

The CY8C3445PVI-077 fits compact industrial sensing designs that require measurement and control in one controller. Its PSoC 3 architecture integrates configurable analog blocks with an 8051-compatible core, allowing sensor signals to be acquired and processed without relying on a separate analog interface IC. The 32KB flash provides space for configuration tables, calibration constants, control logic, and communications firmware, while 4KB SRAM supports working state and acquisition buffers. Designers can assign programmable digital blocks to timing, counters, and control functions. Production validation should confirm the exact clock grade, supply range, temperature range, and noise performance required by the installed sensors.

📡

Programmable Measurement Front End

The CY8C3445PVI-077 is suitable for measurement front ends where analog conditioning, conversion, and digital processing must share a common platform. Configurable analog blocks can implement the required signal path, while the 8051-compatible core executes compensation and filtering algorithms. The 32KB embedded flash is adequate for configuration data, calibration values, and compact firmware, and the family’s programmable digital blocks can support counters and deterministic control sequences. Because peripheral assignments and clock settings are configuration-dependent, engineers should validate gain, bandwidth, noise, and timing against the actual sensor source and production temperature range.

🌐

Embedded Communication Controller

The CY8C3445PVI-077 can serve as the host controller in a compact communication product where protocol timing, data handling, and control must share limited board space. Programmable digital blocks can be assigned to serial communication and event timing, while the MCU core handles framing, diagnostics, and system state. The CY8C34 family’s combination of 32KB flash and 4KB SRAM is useful for compact protocol stacks and device configuration. Board-level signal integrity still depends on the selected communication pins and external transceiver or line interface, so use the family package drawing and pin-description table when allocating board functions.

📱

Consumer Product Interface Controller

The CY8C3445PVI-077 is appropriate for consumer interfaces that combine touch, display, timing, and control functions. PSoC 3 configurable analog and digital resources can replace several discrete input, timing, and interface components, reducing board area and allowing firmware-based changes. The 8051-compatible core processes user actions, while the 32KB flash stores configuration, calibration, and application code. Designers should validate the device’s exact speed and temperature grade, confirm the operating supply range, and account for external display-driver, protection, and connector requirements that are outside the microcontroller’s integrated functions.

🖥️

Compact Instrumentation Control

The CY8C3445PVI-077 can support compact test and measurement equipment where signal acquisition, timing, and control must be implemented in a limited enclosure. Its programmable analog blocks provide flexible front-end resources, while programmable digital blocks can handle counters, triggers, and control sequencing. The 32KB flash and 4KB SRAM allow firmware, calibration data, and short working buffers to reside locally without an external memory device. For laboratory-grade accuracy, evaluate the selected PSoC configuration, reference strategy, analog layout, shielding, and calibration process rather than relying on nominal microcontroller specifications alone.

🔋

Battery-Powered Embedded Controller

The CY8C3445PVI-077 is useful in battery-powered embedded products where a mixed-signal controller can reduce the number of supporting components. The PSoC 3 architecture combines programmable analog measurement, digital timing, and an 8051-compatible control core in one package, which can simplify low-power sensor nodes and portable instruments. The family provides 32KB flash and 4KB SRAM for compact firmware and working data. Power-budget decisions must be based on the selected clock, analog configuration, enabled peripherals, and operating voltage because the PSoC configuration directly affects active current.

What is the CY8C3445PVI-077?
The CY8C3445PVI-077 is an 8-bit PSoC 3 programmable system-on-chip with 32KB of flash memory, an 8051-compatible core, and configurable analog and digital peripherals in a 48-BSSOP package. According to the CY8C34 family datasheet 001-53304, the architecture integrates signal acquisition, signal processing, and control functions into one programmable device.
What are the key specifications of CY8C3445PVI-077 that engineers should know?
The CY8C3445PVI-077 combines an 8051-compatible core, 32KB of flash, 4KB of SRAM, configurable analog and digital blocks, and a 48-BSSOP package. The CY8C34 family datasheet 001-53304 describes the peripheral architecture, while the ordering information identifies the physical package as 7.50mm wide with surface mounting.
Where can I download the CY8C3445PVI-077 datasheet PDF?
The CY8C3445PVI-077 datasheet PDF is available from the CY8C34 family document 001-53304 at the linked datasheet address. Use the manufacturer datasheet for the pin-description table, package drawing, electrical characteristics, and programming recommendations, and confirm that the selected ordering option matches the intended speed grade.
Where can I find the CY8C3445PVI-077 pinout?
The CY8C3445PVI-077 pinout is shown in the package drawing and pin-description table of the CY8C34 family datasheet 001-53304. The component uses a 48-BSSOP package, so do not assign PCB nets from a generic 48-pin diagram; verify each signal name, power pin, ground pin, and programming function against the exact device documentation.
What is the difference between CY8C3445PVI-077 and CY8C3445PVI-088?
The CY8C3445PVI-088 is listed as an 8-bit PSoC 3 MCU with a 50MHz maximum clock, 32KB flash, and a 1.71V-to-5.5V operating range. The CY8C3445PVI-077 uses the same CY8C3445 family and 48-pin package, but its ordering-grade electrical limits should be confirmed before substituting one for the other.
CY8C3445PVI-077 vs CY8C3445PVI-094 - which is better for a high-speed control design?
The CY8C3445PVI-094 is explicitly specified with an 8051 core up to 50MHz, 32KB flash, and 4KB SRAM. It is the better documented choice for a design requiring that 50MHz rating, while the CY8C3445PVI-077 should be selected when its specific clock and temperature grade satisfy the design requirements.
When should I choose CY8C3445PVI-077 over CY8C3445PVI-088?
Choose CY8C3445PVI-077 when the product has been qualified around its exact ordering code and required operating grade. Choose CY8C3445PVI-088 when a documented 50MHz maximum clock and 1.71V-to-5.5V range are required, because those electrical limits are explicitly stated for the -088 ordering option.
When should I choose CY8C3445PVI-077 over CY8C3445PVI-094?
Choose the CY8C3445PVI-077 when it appears on the approved bill of materials and its grade matches the product specification. Choose the CY8C3445PVI-094 when its documented 50MHz core rating, 32KB flash, and 4KB SRAM are explicitly needed and the -094 ordering limits meet the application.
What is the best drop-in replacement for CY8C3445PVI-077?
The CY8C3445PVI-088 is the closest documented same-family alternative because it belongs to the CY8C3445 PSoC 3 family and is offered in the same 48-BSSOP package. The CY8C3445PVI-094 is another same-family ordering option, but replacement requires checking clock, voltage, temperature, and qualification requirements before production use.
Can CY8C3445PVI-088 replace CY8C3445PVI-077?
The CY8C3445PVI-088 can serve as a candidate replacement because it uses the same CY8C3445 family and 48-BSSOP footprint and is documented at up to 50MHz. Final approval should confirm the target device's clock grade, supply range, temperature range, pin functions, and firmware assumptions before replacing the -077 part.
What can replace CY8C3445PVI-077?
A replacement for the CY8C3445PVI-077 should use the same 48-BSSOP footprint and preserve the PSoC 3 peripheral architecture. The documented candidates are CY8C3445PVI-088 and CY8C3445PVI-094, but the choice depends on the required clock speed, supply voltage, temperature grade, and programmed-device behavior.
Where to buy CY8C3445PVI-077 online?
Use the Request a Quote form on this page to request CY8C3445PVI-077 availability, lot information, and a quotation for the required quantity. The form is the appropriate route for current sourcing because inventory, date codes, and commercial terms can change independently of the device's technical specification.
What is the price of CY8C3445PVI-077?
Request a current quotation for CY8C3445PVI-077 through the Request a Quote form on this page. Commercial pricing depends on order quantity, inventory, date code, and delivery requirements, so the form provides the most appropriate route for a transaction-specific response.
What is the lead time for CY8C3445PVI-077?
Request the current lead time for CY8C3445PVI-077 through the Request a Quote form on this page. Lead time should be confirmed for the selected package, order quantity, production date, and shipment destination rather than inferred from a general catalog listing.
Is CY8C3445PVI-077 in stock?
Current CY8C3445PVI-077 stock should be confirmed through the Request a Quote form on this page. Include the required quantity, target date, acceptable date code, and shipment location so the supplier can return an availability answer tied to the actual production requirement.
Is CY8C3445PVI-077 suitable for industrial signal-control systems?
The CY8C3445PVI-077 is suitable for compact embedded signal-control systems because its PSoC 3 architecture combines an 8051-compatible core with configurable analog and digital blocks. The CY8C34 family datasheet 001-53304 identifies these resources for signal acquisition, processing, and control; industrial use still requires validation of temperature grade, EMC requirements, and long-term availability.

Technische Referenzdaten für CY8C3445PVI-077 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the CY8C3445PVI-077 when it is already specified on an approved BOM and the design needs a compact 8-bit PSoC 3 controller with 32KB flash, 4KB SRAM, configurable analog and digital blocks, and a 48-BSSOP footprint. It is especially attractive when consolidating sensing, timing, and control would reduce external components. Consider the CY8C3445PVI-088 when a documented 50MHz maximum clock and 1.71V-to-5.5V operating range are required. Consider the CY8C3445PVI-094 when a documented 50MHz 8051 core, 32KB flash, and 4KB SRAM match the design. Before any substitution, verify the exact clock, voltage, temperature, programming, qualification, and lifecycle requirements. A shared package permits board-level reuse, but it does not automatically guarantee equivalent operating limits or firmware behavior.

Vergleich mit Alternativen

Parameter Dieses Produkt CY8C3445PVI-088 CY8C3445PVI-094
Brand Cypress Semiconductor Infineon Technologies Infineon Technologies
Package 48-BSSOP 48-BSSOP 48-BSSOP
Product Type 8-bit PSoC 3 microcontroller 8-bit PSoC 3 microcontroller PSoC 3 MCU
Processor Core 8051-compatible core 8051 core 8051 core
Program Flash 32KB 32KB 32kByte
Programmable Analog and Digital Resources Configurable analog blocks and programmable digital blocks Configurable analog and digital peripherals Configurable PSoC 3 peripheral blocks

Wichtigste Unterscheidungsmerkmale

  • Integrated configurable analog and digital peripherals (vs. CY8C3445PVI-088)
  • Same-family 50MHz ordering option is documented (vs. CY8C3445PVI-094)
  • Documented supply-voltage range in the -088 option (vs. CY8C3445PVI-088)

Designhinweise

Assign PCB nets from the exact CY8C3445PVI-077 pin-description table in datasheet 001-53304, not from a generic 48-BSSOP symbol. Preserve the documented power and ground connections, route programming signals to accessible test pads, and place configured analog inputs away from high-current switching paths. Because the -077 ordering grade has distinct qualification conditions, keep its package symbol and programmed-device configuration tied to the released bill of materials.

Evaluate supply tolerance, startup behavior, and active current for the actual PSoC configuration. The alternative CY8C3445PVI-088 is documented for a 1.71V-to-5.5V operating range, but that range must not be assigned automatically to the -077 device. Confirm its electrical limits in the family datasheet and allow suitable local decoupling at the supply pins to prevent conducted noise from disturbing the configurable analog blocks.

Keep analog inputs and reference connections short, guarded where appropriate, and separated from digital switching returns. The PSoC architecture allows analog and digital functions to share one package, but performance still depends on the physical implementation. Validate common-mode range, acquisition bandwidth, and noise with the final component placement, ground-plane geometry, external passives, and enclosure rather than relying only on firmware configuration.

Do not treat the -077, -088, and -094 ordering codes as interchangeable without checking clock, voltage, temperature, and qualification requirements. The 48-BSSOP footprint match is necessary but does not by itself prove drop-in suitability. Before substitution, compare the complete ordering tables, verify programming support, and confirm that existing firmware and peripheral assignments remain valid.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer datasheet family document 001-53304 does not establish the requested product-level environmental, automotive, or material-compliance declarations in the referenced content. These fields remain unknown until confirmed from the exact product declaration.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

CY8C3445PVI-077 datasheet CY8C3445PVI-077 pinout CY8C3445PVI-077 datasheet pdf CY8C3445PVI-077 equivalent CY8C3445PVI-077 replacement CY8C3445PVI-077 cross reference CY8C3445PVI-077 price CY8C3445PVI-077 stock Cypress CY8C3445PVI-077 CY8C3445PVI-077 48-BSSOP CY8C3445PVI-077 programming CY8C3445PVI-077 vs CY8C3445PVI-088

Verwandte Bauteile & Begriffe

Cypress Semiconductor Infineon Technologies CY8C3445PVI-077 CY8C3445PVI-088 CY8C3445PVI-094 PSoC 3 CY8C34 family 8-bit microcontroller 8051-compatible core embedded microcontroller programmable system-on-chip mixed-signal microcontroller semiconductor 32KB flash 4KB SRAM configurable analog blocks programmable digital blocks 48-BSSOP surface-mount package ISP-SWD signal acquisition signal processing embedded control industrial sensing programmable peripheral
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen