CY8C3445PVI-077 - 8-Bit 32KB Flash PSoC 3 | Cypress
部品番号: CY8C3445PVI-077 ✓ 生産中CY8C3445PVI-077 概要
A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that places a CPU, programmable analog blocks, digital logic, and programmable I/O on a single integrated circuit. Within the semiconductor hierarchy, this device belongs to the embedded-processor and microcontroller category rather than a general-purpose logic IC or fixed-function analog component. Its configurable peripheral structure can replace several discrete analog, timer, counter, and interface functions around a conventional 8051-class controller.
The CY8C3445PVI-077 belongs to the CY8C34 family documented under datasheet 001-53304. The family provides 32KB flash and 4KB SRAM, while its configurable blocks support analog-to-digital conversion, digital-to-analog conversion, timers, counters, serial communications, and programmable interrupt handling. Because the peripheral behavior is configured in firmware, engineers can adapt signal-chain functions without changing the physical PCB when requirements change.
The PSoC 3 architecture combines an 8051-compatible processing core with a fabric of programmable analog and digital blocks. Analog blocks can implement functions such as amplifiers, analog buffers, comparators, and converters, while digital blocks provide timing, counters, serial communication, and programmable logic. This architecture supports deterministic embedded control while reducing the number of external components required around a microcontroller.
Typical uses for the CY8C3445 family include industrial sensing and control, consumer product interfaces, instrumentation, communication modules, and compact embedded control systems. A designer can use the integrated analog resources for sensor conditioning or signal acquisition and assign programmable digital blocks to timers, communication protocols, or control functions.
The primary design consideration is firmware and peripheral configuration. Before assigning pins, use the device pin-description table and package drawing in the manufacturer datasheet. Decoupling, grounding, programming-interface access, and unused input handling should follow the recommended application circuit, while clock and analog performance should be validated with the selected PSoC configuration.
ドロップイン代替品: CY8C3445PVI-077 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: CY8C3445PVI-077 (同一形状・フットプリント) — 相違点: Package, Mounting Type, SRAM, Device Type, Processor Core.
CY8C3445PVI-088
✅ ドロップイン価格はお問い合わせください
データシートを見る →CY8C3445PVI-094
✅ ドロップイン価格はお問い合わせください
データシートを見る →CY8C3445PVI-077 最大定格&電気的特性
| Device Type | 8-bit programmable system-on-chip microcontroller |
| Series | PSoC 3 CY8C34 family |
| Processor Core | 8051-compatible core |
| Program Flash | 32KB |
| SRAM | 4KB |
| Maximum Clock Frequency for CY8C3445PVI-094 | 50MHz |
| Supply Voltage Range for CY8C3445PVI-088 | 1.71V to 5.5V |
| Programmable Analog Blocks | Configurable analog signal-acquisition and processing blocks |
| Programmable Digital Blocks | Configurable timers, counters, serial communication, and programmable logic blocks |
| パッケージ | 48-BSSOP |
| Package Width | 7.50mm |
| Package Body Width | 0.295inch |
| 実装タイプ | Surface mount |
| Programming Interface | ISP-SWD |
CY8C3445PVI-077 0.295inch ピン配置ガイド
CY8C3445PVI-077 (0.295inch パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: CY8C3445PVI-077.
詳細は データシート をご参照ください。
主な用途
CY8C3445PVI-077 の用途: 6 件s: Industrial Sensor Acquisition, Programmable Measurement Front End, Embedded Communication Controller, Consumer Product Interface Controller, Compact Instrumentation Control, Battery-Powered Embedded Controller.
Industrial Sensor Acquisition
The CY8C3445PVI-077 fits compact industrial sensing designs that require measurement and control in one controller. Its PSoC 3 architecture integrates configurable analog blocks with an 8051-compatible core, allowing sensor signals to be acquired and processed without relying on a separate analog interface IC. The 32KB flash provides space for configuration tables, calibration constants, control logic, and communications firmware, while 4KB SRAM supports working state and acquisition buffers. Designers can assign programmable digital blocks to timing, counters, and control functions. Production validation should confirm the exact clock grade, supply range, temperature range, and noise performance required by the installed sensors.
おすすめ
Programmable Measurement Front End
The CY8C3445PVI-077 is suitable for measurement front ends where analog conditioning, conversion, and digital processing must share a common platform. Configurable analog blocks can implement the required signal path, while the 8051-compatible core executes compensation and filtering algorithms. The 32KB embedded flash is adequate for configuration data, calibration values, and compact firmware, and the family’s programmable digital blocks can support counters and deterministic control sequences. Because peripheral assignments and clock settings are configuration-dependent, engineers should validate gain, bandwidth, noise, and timing against the actual sensor source and production temperature range.
おすすめ
Embedded Communication Controller
The CY8C3445PVI-077 can serve as the host controller in a compact communication product where protocol timing, data handling, and control must share limited board space. Programmable digital blocks can be assigned to serial communication and event timing, while the MCU core handles framing, diagnostics, and system state. The CY8C34 family’s combination of 32KB flash and 4KB SRAM is useful for compact protocol stacks and device configuration. Board-level signal integrity still depends on the selected communication pins and external transceiver or line interface, so use the family package drawing and pin-description table when allocating board functions.
おすすめ
Consumer Product Interface Controller
The CY8C3445PVI-077 is appropriate for consumer interfaces that combine touch, display, timing, and control functions. PSoC 3 configurable analog and digital resources can replace several discrete input, timing, and interface components, reducing board area and allowing firmware-based changes. The 8051-compatible core processes user actions, while the 32KB flash stores configuration, calibration, and application code. Designers should validate the device’s exact speed and temperature grade, confirm the operating supply range, and account for external display-driver, protection, and connector requirements that are outside the microcontroller’s integrated functions.
おすすめ
Compact Instrumentation Control
The CY8C3445PVI-077 can support compact test and measurement equipment where signal acquisition, timing, and control must be implemented in a limited enclosure. Its programmable analog blocks provide flexible front-end resources, while programmable digital blocks can handle counters, triggers, and control sequencing. The 32KB flash and 4KB SRAM allow firmware, calibration data, and short working buffers to reside locally without an external memory device. For laboratory-grade accuracy, evaluate the selected PSoC configuration, reference strategy, analog layout, shielding, and calibration process rather than relying on nominal microcontroller specifications alone.
おすすめ
Battery-Powered Embedded Controller
The CY8C3445PVI-077 is useful in battery-powered embedded products where a mixed-signal controller can reduce the number of supporting components. The PSoC 3 architecture combines programmable analog measurement, digital timing, and an 8051-compatible control core in one package, which can simplify low-power sensor nodes and portable instruments. The family provides 32KB flash and 4KB SRAM for compact firmware and working data. Power-budget decisions must be based on the selected clock, analog configuration, enabled peripherals, and operating voltage because the PSoC configuration directly affects active current.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: CY8C3445PVI-077 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | CY8C3445PVI-088 | CY8C3445PVI-094 |
|---|---|---|---|
| Brand | Cypress Semiconductor | Infineon Technologies | Infineon Technologies |
| Package | 48-BSSOP | 48-BSSOP | 48-BSSOP |
| Product Type | 8-bit PSoC 3 microcontroller | 8-bit PSoC 3 microcontroller | PSoC 3 MCU |
| Processor Core | 8051-compatible core | 8051 core | 8051 core |
| Program Flash | 32KB | 32KB | 32kByte |
| Programmable Analog and Digital Resources | Configurable analog blocks and programmable digital blocks | Configurable analog and digital peripherals | Configurable PSoC 3 peripheral blocks |
主な差別化要因
- Integrated configurable analog and digital peripherals (vs CY8C3445PVI-088)
- Same-family 50MHz ordering option is documented (vs CY8C3445PVI-094)
- Documented supply-voltage range in the -088 option (vs CY8C3445PVI-088)
設計ノート
Assign PCB nets from the exact CY8C3445PVI-077 pin-description table in datasheet 001-53304, not from a generic 48-BSSOP symbol. Preserve the documented power and ground connections, route programming signals to accessible test pads, and place configured analog inputs away from high-current switching paths. Because the -077 ordering grade has distinct qualification conditions, keep its package symbol and programmed-device configuration tied to the released bill of materials.
Evaluate supply tolerance, startup behavior, and active current for the actual PSoC configuration. The alternative CY8C3445PVI-088 is documented for a 1.71V-to-5.5V operating range, but that range must not be assigned automatically to the -077 device. Confirm its electrical limits in the family datasheet and allow suitable local decoupling at the supply pins to prevent conducted noise from disturbing the configurable analog blocks.
Keep analog inputs and reference connections short, guarded where appropriate, and separated from digital switching returns. The PSoC architecture allows analog and digital functions to share one package, but performance still depends on the physical implementation. Validate common-mode range, acquisition bandwidth, and noise with the final component placement, ground-plane geometry, external passives, and enclosure rather than relying only on firmware configuration.
Do not treat the -077, -088, and -094 ordering codes as interchangeable without checking clock, voltage, temperature, and qualification requirements. The 48-BSSOP footprint match is necessary but does not by itself prove drop-in suitability. Before substitution, compare the complete ordering tables, verify programming support, and confirm that existing firmware and peripheral assignments remain valid.
コンプライアンス情報
The manufacturer datasheet family document 001-53304 does not establish the requested product-level environmental, automotive, or material-compliance declarations in the referenced content. These fields remain unknown until confirmed from the exact product declaration.