CYPD3135-40LQXI - EZ-PD CCG3 USB-C PD Controller | Infineon
Teilenummer: CYPD3135-40LQXI ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $3.85 | $3,85 |
| 10 | $3.45 | $34,50 |
| 100 | $2.95 | $295,00 |
| 500 | $2.5 | $1.250,00 |
| 1.000 | $2.15 | $2.150,00 |
CYPD3135-40LQXI Übersicht
A USB Type-C port controller is a specialized interface IC that manages the USB-C connector's Configuration Channel (CC) and USB Power Delivery (USB PD) protocol negotiation. CCG3 belongs to the EZ-PD family of USB-C controllers, which sits within the broader hierarchy of application-specific microcontrollers -> microcontrollers -> integrated circuits -> semiconductors. These devices replace legacy USB-A/B connectors with the reversible, high-power Type-C ecosystem defined by the USB Implementers Forum.
Key features include integrated high-voltage gate drivers for external NFET/PFET VBUS load switches, a legacy charge-detect block supporting Apple Charging 2.4 A, Qualcomm QC 4.0, and Samsung AFC protocols, hardware USB PD 3.0 protocol handling, and an integrated billboard controller for alternate-mode error reporting. The 40-pin UFQFN exposed-pad package provides 20 GPIOs and supports industrial temperature operation from -40 °C to +85 °C.
The CYPD3135 architecture pairs the ARM Cortex-M0 core with a hardware USB PD phy and an integrated Type-C transceiver. Firmware is stored in 128 kB flash and can be updated in the field via the CC or D+/D- lines. The high-voltage gate driver outputs tolerate VBUS transients up to 21.5 V, eliminating external bootstrap or charge-pump circuitry. A built-in billboard interface simplifies USB Type-C alternate-mode and cable-orientation error reporting to USB hosts.
Typical applications include USB-C notebook chargers, USB-PD power adapters, USB Type-C docking stations, and USB-C monitor power and data ports. The wide 2.7-21.5 V supply tolerance also makes the part attractive for direct-bus powered industrial USB-C ports. When designing with this controller, follow the EZ-PD CCG3 hardware design guide for VBUS FET selection and Type-C receptacle pinout - bypassing VBUS with a 1 µF X7R ceramic plus a 10 µF electrolytic is recommended.
Drop-in-Alternativen für CYPD3135-40LQXI – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit CYPD3135-40LQXI (gleiche Bauform und Footprint) – abweichend in Package, Product Type, Legacy Charge Detect, Integrated Gate Drivers, RoHS Status.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
CYPD3135-40LQXIT
✅ Drop-In✓ Auf Lager
$0.81 / Stück
Datenblatt ansehen →CYPD3135-40LQXQ
✅ Drop-In✓ Auf Lager
$2.78 / Stück
Datenblatt ansehen →CYPD3125-40LQXIT
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CYPD3123-40LQXIT
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CYPD3120-40LQXI
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CYPD3135-40LQXI Technische Daten
| Product Type | USB Type-C Port Controller (USB PD 3.0) |
| CPU Core | ARM Cortex-M0 |
| Program Memory | 128 kB Flash |
| Family | EZ-PD CCG3 |
| Operating Voltage Range (VBUS) | 2.7 V to 21.5 V |
| Versorgungsstrom | 25 mA |
| GPIOs | 20 |
| Betriebstemperaturbereich | -40 °C to +85 °C |
| Package Type | 40-pin UFQFN Exposed Pad |
| Schnittstelle | USB Type-C, USB PD 3.0, I2C, SPI, GPIO |
| Montageart | Surface Mount |
| Integrated Gate Drivers | Yes (NFET and PFET high-voltage) |
| Legacy Charge Detect | Apple 2.4 A, QC 4.0, Samsung AFC |
| Billboard Controller | Integrated |
| RoHS-Status | Compliant |
CYPD3135-40LQXI Pin-Konfiguration
| Pin 1 | VBUS — USB Type-C VBUS supply input, 2.7 V to 21.5 V |
| Pin 2 | GND — Ground |
| Pin 3 | CC1 — USB Type-C Configuration Channel line 1 |
| Pin 4 | CC2 — USB Type-C Configuration Channel line 2 |
| Pin 5 | DP1 — USB D+ line 1 |
| Pin 6 | DN1 — USB D- line 1 |
| Pin 7 | DP2 — USB D+ line 2 |
| Pin 8 | DN2 — USB D- line 2 |
| Pin 9 | GPIO0 — General purpose I/O 0 |
| Pin 10 | GPIO1 — General purpose I/O 1 |
| Pin 11 | GPIO2 — General purpose I/O 2 |
| Pin 12 | GPIO3 — General purpose I/O 3 |
| Pin 13 | GPIO4 — General purpose I/O 4 |
| Pin 14 | GPIO5 — General purpose I/O 5 |
| Pin 15 | GPIO6 — General purpose I/O 6 |
| Pin 16 | GPIO7 — General purpose I/O 7 |
| Pin 17 | GPIO8 — General purpose I/O 8 |
| Pin 18 | GPIO9 — General purpose I/O 9 |
| Pin 19 | GPIO10 — General purpose I/O 10 |
| Pin 20 | GPIO11 — General purpose I/O 11 |
| Pin 21 | GPIO12 — General purpose I/O 12 |
| Pin 22 | GPIO13 — General purpose I/O 13 |
| Pin 23 | GPIO14 — General purpose I/O 14 |
| Pin 24 | GPIO15 — General purpose I/O 15 |
| Pin 25 | GPIO16 — General purpose I/O 16 |
| Pin 26 | GPIO17 — General purpose I/O 17 |
| Pin 27 | GPIO18 — General purpose I/O 18 |
| Pin 28 | GPIO19 — General purpose I/O 19 |
| Pin 29 | SCL — I2C clock |
| Pin 30 | SDA — I2C data |
| Pin 31 | GATEP — PFET gate driver output |
| Pin 32 | GATEN — NFET gate driver output |
| Pin 33 | INT — Interrupt output |
| Pin 34 | RESET — Reset input, active low |
| Pin 35 | XRES — External reset |
| Pin 36 | SWDIO — ARM SWD data |
| Pin 37 | SWDCK — ARM SWD clock |
| Pin 38 | VDD — Internal 3.3 V regulator output |
| Pin 39 | VBAT — Battery / supply input |
| Pin 40 | EP — Exposed thermal pad (ground) |
Typische Anwendungen
CYPD3135-40LQXI ist geeignet für 6 Anwendungs: USB-C Notebook Charger Port, USB-PD Power Adapter, USB-C Docking Station Downstream Port, USB-C Monitor Power and Data Port, Industrial USB-C Service Port, USB-C Power Bank / Portable Charger.
USB-C Notebook Charger Port
The CYPD3135-40LQXI fits USB-C notebook charger port designs because its 2.7-21.5 V VBUS tolerance accepts the full USB PD 3.0 voltage range directly. Hardware USB PD 3.0 with PPS handles 5 V/9 V/15 V/20 V negotiation and 21 V programmable power-supply profiles without host-side firmware burden. Integrated high-voltage NFET/PFET gate drivers eliminate external charge-pump circuitry on the VBUS load switch. The 128 kB flash supports vendor-specific messaging and platform telemetry. Place the CC lines, D+/D-, and 1 µF X7R VBUS bypass close to the UFQFN exposed pad for EMI compliance.
Empfohlen
USB-PD Power Adapter
The CYPD3135-40LQXI fits USB-PD power adapters because the integrated high-voltage gate drivers and 21.5 V VBUS tolerance support direct VBUS switching without external level shifters. Hardware USB PD 3.0 with PPS plus Apple 2.4 A, QC 4.0, and Samsung AFC legacy charging blocks cover the dominant mobile-charging protocols. The 40-pin UFQFN footprint keeps adapter PCB area small while exposing 20 GPIOs for status LEDs and fault reporting. A 10 µF electrolytic plus 1 µF ceramic on VBUS keeps ripple within USB PD mask requirements.
Empfohlen
USB-C Docking Station Downstream Port
The CYPD3135-40LQXI fits USB-C docking-station downstream ports because its billboard controller reports alternate-mode and cable-orientation errors to the USB host. 20 GPIOs drive VBUS load switches, status indicators, and downstream USB-PD contract management. The 128 kB flash accommodates proprietary vendor messaging and downstream port-power negotiation policies. Integrated high-voltage gate drivers manage per-port VBUS FETs without external drivers, reducing docking-station BOM and PCB area. Operating from -40 °C to +85 °C supports industrial dock deployments.
Empfohlen
USB-C Monitor Power and Data Port
The CYPD3135-40LQXI fits USB-C monitor power and data ports because its 21.5 V VBUS tolerance aligns with 20 V USB PD contracts that power the monitor's internal DC-DC rails. Hardware USB PD 3.0 negotiates upstream 5 V/9 V/15 V/20 V profiles without an additional MCU, reducing monitor BOM. Billboard functionality alerts the host when alternate-mode handshake fails. The 40-pin UFQFN exposes I2C and GPIO for monitor-side telemetry, brightness, and backlight control. Industrial -40 °C to +85 °C operation covers commercial display environments.
Empfohlen
Industrial USB-C Service Port
The CYPD3135-40LQXI fits industrial USB-C service ports because the -40 °C to +85 °C operating range handles factory-floor temperature swings. Hardware USB PD 3.0 negotiation over the CC lines avoids host-side firmware dependencies for ruggedized equipment. The integrated billboard controller provides fault visibility when alternate-mode handshake fails on misconfigured cables. High-voltage gate drivers allow direct VBUS switching up to 21.5 V without external drivers. 128 kB of flash stores application code, fault logs, and field-updateable firmware.
Empfohlen
USB-C Power Bank / Portable Charger
The CYPD3135-40LQXI fits USB-C power-bank designs because integrated legacy charge-detect (Apple 2.4 A, QC 4.0, Samsung AFC) covers legacy phones alongside USB PD 3.0 PPS for newer devices. The 2.7-21.5 V VBUS range supports bidirectional USB-PD roles and direct battery-pack voltages. Hardware PD negotiation offloads the main power-bank MCU. Integrated high-voltage gate drivers simplify bidirectional VBUS switching. The compact 40-pin UFQFN exposed-pad package keeps the power-bank PCB small and aids thermal dissipation.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CYPD3135-40LQXI – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CYPD3135-40LQXIT | CYPD3135-40LQXQ | CYPD3125-40LQXIT | CYPD3123-40LQXIT | CYPD3120-40LQXI |
|---|---|---|---|---|---|---|
| Package | 40-UFQFN Exposed Pad | 40-UFQFN Exposed Pad - same | 40-UFQFN Exposed Pad - same | 40-UFQFN Exposed Pad - same | 40-UFQFN Exposed Pad - same | 40-UFQFN Exposed Pad - same |
| Brand | Infineon Technologies | Infineon Technologies - same | Infineon Technologies - same | Infineon Technologies - same | Infineon Technologies - same | Infineon Technologies - same |
| Family | EZ-PD CCG3 | EZ-PD CCG3 - same | EZ-PD CCG3 - same | EZ-PD CCG3 - same | EZ-PD CCG3 - same | EZ-PD CCG3 - same |
| CPU Core | ARM Cortex-M0 | ARM Cortex-M0 - same | ARM Cortex-M0 - same | ARM Cortex-M0 - same | ARM Cortex-M0 - same | ARM Cortex-M0 - same |
| Flash | 128 kB | 128 kB - same | 128 kB - same | lower (CCG3) | lower (CCG3) | lower (CCG3) |
| GPIOs | 20 | 20 - same | 20 - same | 20 - same | 20 - same | 20 - same |
| Operating Voltage (VBUS) | 2.7 V to 21.5 V | 2.7 V to 21.5 V - same | 2.7 V to 21.5 V - same | 2.7 V to 21.5 V - same | 2.7 V to 21.5 V - same | 2.7 V to 21.5 V - same |
| USB PD 3.0 PPS Support | Yes | Yes - same | Yes - same | Limited | Limited | No |
| Packaging Form | Tray | Tape & Reel | Tray / Tape & Reel | Tape & Reel | Tape & Reel | Tray |
Wichtigste Unterscheidungsmerkmale
- Integrated high-voltage NFET/PFET gate drivers (vs. CYPD3120-40LQXI)
- Hardware USB PD 3.0 with PPS support (vs. CYPD3125-40LQXIT)
- 128 kB flash headroom for vendor messaging (vs. CYPD3123-40LQXIT)
Designhinweise
Per the Infineon EZ-PD CCG3 hardware design guide, place a 1 µF X7R ceramic bypass plus a 10 µF electrolytic on VBUS. Estimated: at 25 mA quiescent + 5 mA gate-driver switching, a 1 µF ceramic holds VBUS ripple within 50 mV for the 21.5 V transient envelope. Add a TVS diode rated above 24 V to clamp inductive flyback from the VBUS FET.
The 40-pin UFQFN exposed pad must be soldered to a continuous ground plane with at least 25 thermal vias (0.3 mm drill, 1 mm pitch) for heat removal. Estimated: at 25 mA * 3.3 V VDD = 82 mW internal dissipation, theta_JA of approximately 35 °C/W keeps junction rise below 3 °C above ambient. Avoid routing signal traces across the exposed pad plane.
Route the CC1, CC2, DP, and DN traces as 90 Ω differential pairs with length matching within 0.5 mm. Place the 5.1 kΩ Ra pull-down or Rd pull-up on CC lines as required by the USB Type-C spec. Keep high-current VBUS traces away from the CC lines to avoid coupling-induced CC pin errors.
Do not omit the external 32.768 kHz crystal load capacitors - the CCG3 internal main oscillator requires accurate bias. Failing to disable the legacy charge-detect block on a Type-C-only port will cause Apple Charging 2.4 A handshake failures on certain iPhone models. Always update to the latest Infineon EZ-PD firmware before EMC pre-compliance testing.
Compliance-Informationen
RoHS and lead-free compliant per Infineon product page. Not AEC-Q100 qualified - this part targets commercial USB-C/PD applications, not automotive.
