DG202DY+ - 4-Channel SPST CMOS Switch | Analog Devices
Teilenummer: DG202DY+ ✓ AktivDG202DY+ Übersicht
An analog switch is an integrated semiconductor device that connects or isolates nodes under digital control. The DG202 belongs to the CMOS analog-switch hierarchy, which sits within interface ICs and broader signal-management systems. Unlike a mechanical relay, it changes state rapidly without moving mechanical contacts. This makes it suitable for precision test equipment, signal routing, instrumentation, and industrial control systems where repeatable switching and compact implementation matter.
The DG202 provides four independent single-pole, single-throw channels, 200-ohm maximum on-resistance, and 600-ns maximum on-time. Its normally open configuration means that each switched terminal remains disconnected until the corresponding control input is asserted. The manufacturer specifies continuous operation with dual supplies from -18 V to +18 V, including operation near ±4.5 V. These characteristics make the device suitable for routing bipolar or unipolar signals when the system requires a compact four-channel solution.
The DG202 is functionally distinguished from the DG201 by inverted control polarity, while the DG212 provides the complementary functional behavior within the related family. According to the Analog Devices product page, the switches are designed to avoid latch-up when power is disconnected while input signals remain connected. That behavior supports more dependable system power sequencing, although correct supply sequencing and input-voltage limits must still be observed in the final circuit.
Typical applications include automated test systems, data-acquisition front ends, analog signal multiplexing, industrial process monitoring, laboratory instrumentation, and control systems. The device can route sensors, conditioned analog outputs, reference signals, or feedback paths under microcontroller control. Four channels in one package reduce component count and make it especially useful where several independent analog signals must be selected or disconnected.
Layout should keep switch traces short and provide a solid ground reference because high on-resistance makes the switch sensitive to leakage, contamination, and PCB contamination-related leakage. Avoid routing inputs beyond the permitted signal range, account for off-state leakage when designing high-impedance networks, and use the control-input timing and power-sequencing guidance in the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins with a short return path.
This page combines the DG202DY+ technical specifications, lifecycle information, application guidance, and verified sourcing references. It also distinguishes true same-footprint drop-in options from related DG201, DG202, and DG212 devices whose control polarity or package prevents unqualified substitution.
Drop-in-Alternativen für DG202DY+ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernDG202DY+ Grenzwerte & elektrische Eigenschaften
| Number of Switches | 4 |
| Switch Configuration | 4 x SPST |
| Initial State | Normally open |
| Maximum On-Resistance | 200 ohm |
| Maximum On-Time | 600 ns |
| Dual-Supply Operating Range | -18 V to +18 V |
| Minimum Dual-Supply Operating Voltage | ±4.5 V |
| Single-Supply Operating Range | 4.5 V to 25 V |
| Channel-to-Channel Matching | 2 ohm |
| Technology | CMOS |
| Gehäuse | 16-SOIC, 0.154 inch (3.90 mm) width |
| Montageart | Surface mount |
| Terminal Count | 16 |
| Betriebstemperatur | -40 °C to +85 °C |
| Manufacturer | Analog Devices / Maxim Integrated |
| Power-Off Protection | Designed to avoid latch-up when supplies are disconnected with input signals still connected |
DG202DY+ 16-soic, 0.154 inch (3.90 mm) width Pinbelegungsleitfaden
Pinbelegung für DG202DY+ (16-soic, 0.154 inch (3.90 mm) width-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für DG202DY+.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
DG202DY+ ist geeignet für 6 Anwendungs: Automated Test Systems, Data-Acquisition Front Ends, Industrial Process Monitoring, Laboratory Instrumentation, Analog Signal Multiplexing, Control and Signal Conditioning.
Automated Test Systems
The DG202DY+ fits automated test systems that must connect several measured or sourced analog nodes to a shared instrument. Four normally open SPST channels provide independent routing in one 16-SOIC package, while the 600-ns maximum on-time supports quick measurement sequencing. The 200-ohm maximum on-resistance is suitable for many low- and medium-impedance sensor paths, though precision high-impedance measurements should include a full leakage and settling-error budget. Keep analog traces short and place decoupling near the supply pins to preserve switching performance.
Empfohlen
Data-Acquisition Front Ends
The DG202DY+ can route four conditioned sensor or analog-input channels in a multiplexed data-acquisition front end. Its four normally open switches isolate channels until selected, and the 200-ohm maximum on-resistance can be included in the source impedance seen by the downstream converter or amplifier. The 600-ns maximum on-time is short enough for controlled channel sequencing, but acquisition systems with very high source impedances must also account for leakage, charge injection, settling time, and PCB cleanliness.
Empfohlen
Industrial Process Monitoring
The DG202DY+ is appropriate for industrial process-monitoring equipment that must connect pressure, temperature, or current-derived analog signals to a shared amplifier or controller. Four isolated SPST paths reduce the number of discrete relays or switch packages, while the -40 °C to +85 °C industrial operating range supports typical equipment environments. Keep protected sensor wiring away from high-energy traces, maintain a common analog ground strategy, and ensure every selected signal remains within the device's electrical limits during switching.
Empfohlen
Laboratory Instrumentation
The DG202DY+ can select among multiple test signals, outputs, or feedback paths in laboratory instrumentation. Its four-channel normally open configuration keeps unselected nodes isolated, and the 600-ns maximum on-time supports rapid settling between test states. The 200-ohm maximum on-resistance is practical for buffer outputs and moderate source impedances but may require buffering for precision dividers or high-impedance sensors. Use short traces, clean connectors, and grounded shields where leakage or external pickup could affect measurement accuracy.
Empfohlen
Analog Signal Multiplexing
The DG202DY+ supports four-channel analog multiplexing when the system requires normally open SPST routing instead of a dedicated multiplexer architecture. Its dual-supply capability from -18 V to +18 V accommodates bipolar signals, while the 600-ns maximum on-time supports moderate multiplexing rates. For high-bandwidth signals, check capacitance and bandwidth in the manufacturer datasheet; for high-impedance sources, include switch leakage and channel-transition errors in the measurement budget.
Empfohlen
Control and Signal Conditioning
The DG202DY+ fits control boards that independently gate four analog signals before amplification, filtering, or conversion. Normally open channels provide a defined resting state and can isolate actuator feedback paths when they are inactive. The 200-ohm maximum on-resistance should be included when selecting resistor values and downstream input loading, while the 600-ns maximum on-time permits deterministic software-controlled transitions. Firmware should also account for control-signal timing and avoid assuming that switching speed alone guarantees complete analog settling.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DG202DY+ – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Package | 16-SOIC |
| Brand | Analog Devices |
| Number of Switches | 4 |
| Switch Configuration | 4 x SPST, normally open |
| Maximum On-Resistance | 200 ohm |
| Maximum On-Time | 600 ns |
| Dual-Supply Operating Range | -18 V to +18 V |
| Single-Supply Operating Range | 4.5 V to 25 V |
| Operating Temperature | -40 °C to +85 °C |
| Technology | CMOS |
Wichtigste Unterscheidungsmerkmale
- Four independent analog routes in one package (vs. DG419DY+)
- Fast controlled channel transitions (vs. DG212DY+)
- Supports bipolar and single-supply operation (vs. DG212DY+)
Designhinweise
Route each switched analog node over a continuous ground plane and minimize the distance from the DG202DY+ to the connected source and destination. The maximum on-resistance is 200 ohm, so trace resistance and contamination can represent a meaningful share of the total path impedance. Keep the switching area free of solder residue and avoid placing high-impedance routes adjacent to fast digital or switching-regulator nodes.
Place the supply-decoupling capacitors directly beside the DG202DY+ power pins and connect them to a low-impedance ground return. Maintain the -18 V to +18 V dual-supply limits, or use the documented 4.5 V to 25 V single-supply configuration as appropriate. Review absolute maximum ratings, control-input states, and signal amplitudes in the manufacturer datasheet before power sequencing or disconnecting supplies.
The 200-ohm maximum on-resistance makes the DG202DY+ most suitable for low- and medium-impedance analog paths. For high-impedance sensors, include off-state leakage, PCB contamination leakage, input capacitance, and switching transients in the error budget. When signal settling must be faster than the 600-ns on-time alone implies, add an external buffer or allow additional acquisition settling time.
Do not treat the related DG201 and DG212 devices as automatic replacements because their control polarity differs. Verify the active level of all four control inputs, confirm the normally open behavior, and review power-off conditions before layout release. Although the DG202 family is designed to avoid latch-up when supplies are disconnected with inputs still connected, normal operating limits and absolute maximum ratings still apply.
Compliance-Informationen
The DG202 family is listed as production by Analog Devices. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the cited technical material and remain unknown.