Analog Devices

DG202DY+ - 4-Channel SPST CMOS Switch | Analog Devices

MPN: DG202DY+ ✓ Hoạt động
-18 V to +18 V Vdss 200 ohm Rds(on) 16-SOIC, 0.154 inch (3.90 mm) width Package
MOQ: 1 |

DG202DY+ Tóm tắt

The Analog Devices DG202DY+ is a four-channel, normally open SPST CMOS analog switch with a maximum on-resistance of 200 ohms, an on-time of 600 ns, and operation from ±4.5 V to ±18 V. It is packaged in a 16-pin SOIC for surface-mount systems requiring independent analog signal routing. The four isolated switches support bidirectional signal paths while normally presenting a high-impedance state when a channel is off.

An analog switch is an integrated semiconductor device that connects or isolates nodes under digital control. The DG202 belongs to the CMOS analog-switch hierarchy, which sits within interface ICs and broader signal-management systems. Unlike a mechanical relay, it changes state rapidly without moving mechanical contacts. This makes it suitable for precision test equipment, signal routing, instrumentation, and industrial control systems where repeatable switching and compact implementation matter.

The DG202 provides four independent single-pole, single-throw channels, 200-ohm maximum on-resistance, and 600-ns maximum on-time. Its normally open configuration means that each switched terminal remains disconnected until the corresponding control input is asserted. The manufacturer specifies continuous operation with dual supplies from -18 V to +18 V, including operation near ±4.5 V. These characteristics make the device suitable for routing bipolar or unipolar signals when the system requires a compact four-channel solution.

The DG202 is functionally distinguished from the DG201 by inverted control polarity, while the DG212 provides the complementary functional behavior within the related family. According to the Analog Devices product page, the switches are designed to avoid latch-up when power is disconnected while input signals remain connected. That behavior supports more dependable system power sequencing, although correct supply sequencing and input-voltage limits must still be observed in the final circuit.

Typical applications include automated test systems, data-acquisition front ends, analog signal multiplexing, industrial process monitoring, laboratory instrumentation, and control systems. The device can route sensors, conditioned analog outputs, reference signals, or feedback paths under microcontroller control. Four channels in one package reduce component count and make it especially useful where several independent analog signals must be selected or disconnected.

Layout should keep switch traces short and provide a solid ground reference because high on-resistance makes the switch sensitive to leakage, contamination, and PCB contamination-related leakage. Avoid routing inputs beyond the permitted signal range, account for off-state leakage when designing high-impedance networks, and use the control-input timing and power-sequencing guidance in the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins with a short return path.

This page combines the DG202DY+ technical specifications, lifecycle information, application guidance, and verified sourcing references. It also distinguishes true same-footprint drop-in options from related DG201, DG202, and DG212 devices whose control polarity or package prevents unqualified substitution.

Bộ thay thế dễ dàng lắp đặt cho DG202DY+ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

DG202DY+ Tỷ lệ tối đa & tính chất điện

Number of Switches 4
Switch Configuration 4 x SPST
Initial State Normally open
Maximum On-Resistance 200 ohm
Maximum On-Time 600 ns
Dual-Supply Operating Range -18 V to +18 V
Minimum Dual-Supply Operating Voltage ±4.5 V
Single-Supply Operating Range 4.5 V to 25 V
Channel-to-Channel Matching 2 ohm
Technology CMOS
Hộp 16-SOIC, 0.154 inch (3.90 mm) width
Kiểu lắp đặt Surface mount
Terminal Count 16
Nhiệt độ hoạt động -40 °C to +85 °C
Manufacturer Analog Devices / Maxim Integrated
Power-Off Protection Designed to avoid latch-up when supplies are disconnected with input signals still connected

Hướng dẫn cấu hình chân DG202DY+ 16-soic, 0.154 inch (3.90 mm) width

Cấu hình chân cho DG202DY+ (16-soic, 0.154 inch (3.90 mm) width gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 16-soic, 0.154 inch (3.90 mm) width cho DG202DY+

Không có dữ liệu chân cụ thể sẵn có cho DG202DY+.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

DG202DY+ phù hợp cho 6 Áp dụngs: Automated Test Systems, Data-Acquisition Front Ends, Industrial Process Monitoring, Laboratory Instrumentation, Analog Signal Multiplexing, Control and Signal Conditioning.

🖥️

Automated Test Systems

The DG202DY+ fits automated test systems that must connect several measured or sourced analog nodes to a shared instrument. Four normally open SPST channels provide independent routing in one 16-SOIC package, while the 600-ns maximum on-time supports quick measurement sequencing. The 200-ohm maximum on-resistance is suitable for many low- and medium-impedance sensor paths, though precision high-impedance measurements should include a full leakage and settling-error budget. Keep analog traces short and place decoupling near the supply pins to preserve switching performance.

📊

Data-Acquisition Front Ends

The DG202DY+ can route four conditioned sensor or analog-input channels in a multiplexed data-acquisition front end. Its four normally open switches isolate channels until selected, and the 200-ohm maximum on-resistance can be included in the source impedance seen by the downstream converter or amplifier. The 600-ns maximum on-time is short enough for controlled channel sequencing, but acquisition systems with very high source impedances must also account for leakage, charge injection, settling time, and PCB cleanliness.

🏭

Industrial Process Monitoring

The DG202DY+ is appropriate for industrial process-monitoring equipment that must connect pressure, temperature, or current-derived analog signals to a shared amplifier or controller. Four isolated SPST paths reduce the number of discrete relays or switch packages, while the -40 °C to +85 °C industrial operating range supports typical equipment environments. Keep protected sensor wiring away from high-energy traces, maintain a common analog ground strategy, and ensure every selected signal remains within the device's electrical limits during switching.

🔬

Laboratory Instrumentation

The DG202DY+ can select among multiple test signals, outputs, or feedback paths in laboratory instrumentation. Its four-channel normally open configuration keeps unselected nodes isolated, and the 600-ns maximum on-time supports rapid settling between test states. The 200-ohm maximum on-resistance is practical for buffer outputs and moderate source impedances but may require buffering for precision dividers or high-impedance sensors. Use short traces, clean connectors, and grounded shields where leakage or external pickup could affect measurement accuracy.

🌐

Analog Signal Multiplexing

The DG202DY+ supports four-channel analog multiplexing when the system requires normally open SPST routing instead of a dedicated multiplexer architecture. Its dual-supply capability from -18 V to +18 V accommodates bipolar signals, while the 600-ns maximum on-time supports moderate multiplexing rates. For high-bandwidth signals, check capacitance and bandwidth in the manufacturer datasheet; for high-impedance sources, include switch leakage and channel-transition errors in the measurement budget.

⚙️

Control and Signal Conditioning

The DG202DY+ fits control boards that independently gate four analog signals before amplification, filtering, or conversion. Normally open channels provide a defined resting state and can isolate actuator feedback paths when they are inactive. The 200-ohm maximum on-resistance should be included when selecting resistor values and downstream input loading, while the 600-ns maximum on-time permits deterministic software-controlled transitions. Firmware should also account for control-signal timing and avoid assuming that switching speed alone guarantees complete analog settling.

What are the key specifications of DG202DY+ that engineers should know?
The DG202DY+ is a four-channel, normally open SPST CMOS analog switch with 200-ohm maximum on-resistance and 600-ns maximum on-time. It operates from -18 V to +18 V across dual supplies and is packaged in a 16-SOIC. Analog Devices identifies the DG202 family as production, and the product page identifies the DG202 as one of the quad SPST devices in the DG202/DG212 family.
Where can I download the DG202DY+ datasheet PDF?
The official DG202 datasheet is linked from the Analog Devices DG202 product page at https://www.analog.com/en/products/dg202.html. The document provides the DG202/DG212 family electrical characteristics, pin descriptions, operating limits, and application information. Use the ordering information in the document to confirm that the 16-SOIC DG202DY+ suffix corresponds to the required package and temperature grade.
Where can I find the DG202DY+ pinout?
The DG202DY+ pinout is defined in the pin-description table of the manufacturer datasheet available from the official Analog Devices DG202 product page. The device uses a 16-SOIC package, so assign PCB land patterns from the package drawing and connect each control and switched terminal according to that table. The final schematic should also preserve the voltage limits and power-off behavior specified for the DG202 family.
What is the difference between DG202DY+ and DG201DY+?
The primary functional difference is control polarity: the DG202 uses inverted control behavior relative to the DG201 family, as stated on the Analog Devices DG202 product page. Both are related quad SPST CMOS switch families, but opposite control polarity can reverse the intended on/off response. Before replacing one with the other, confirm every control input in the schematic and verify the operating voltages against the manufacturer datasheet.
Is DG202DY+ suitable for bipolar analog signal routing?
The DG202DY+ is suitable for bipolar signal routing when operated within its specified supply and signal limits. The DG202 family supports dual supplies from ±4.5 V to ±18 V, with four normally open SPST channels and a 200-ohm maximum on-resistance. Its 600-ns switching time supports fast routing, while the relatively high on-resistance makes leakage and PCB contamination important considerations in precision high-impedance paths.
How does DG202DY+ compare with DG212DY+?
The DG202DY+ and DG212DY+ are related quad SPST CMOS switches, but they provide complementary control behavior within the DG202/DG212 family. The Analog Devices product page identifies the DG202 as normally open and contrasts it with the DG201 family through inverted control. Because control polarity determines when each channel conducts, select the family whose asserted control level matches the existing digital logic and test setup.
When should I choose DG202DY+ over a single-channel analog switch?
Choose DG202DY+ when the design must route four independent analog paths while using one 16-SOIC package. Its four normally open SPST channels, 200-ohm maximum on-resistance, and 600-ns maximum on-time make it useful for automated test and signal-conditioning systems. A single-channel switch may be preferable when only one path is required, the routing topology differs, or a lower on-resistance is more important than channel count.
Is DG202DY+ in stock?
Current inventory should be confirmed through the Request a Quote form on this page rather than inferred from a product-page listing. The Analog Devices product page identifies DG202 as production, which indicates continued manufacturer availability, but production status does not by itself confirm any particular warehouse quantity. Provide the required quantity and delivery location in the quote request to obtain current availability and lead-time confirmation.
What is the price of DG202DY+?
Use the Request a Quote form on this page for the current DG202DY+ price, volume breaks, stock position, and lead time. Quote pricing can depend on order quantity, package suffix, production allocation, and delivery requirements. The Analog Devices product page presents family-level list pricing, but that value should not be treated as a quotation for a specific DG202DY+ order quantity without confirmation.
Where can I buy DG202DY+ online?
The Request a Quote form on this page is the recommended route for obtaining DG202DY+ pricing, current inventory, and lead time. The Analog Devices product page identifies the DG202 family as production. For a new design, provide the exact DG202DY+ ordering code, target quantity, and required delivery date so supply can be matched to the production schedule.
What is the lead time for DG202DY+?
The current lead time should be obtained through the Request a Quote form on this page with the quantity and required delivery date stated. The DG202 family is listed as production by Analog Devices, but manufacturing capacity and allocation can vary by order. A firm delivery commitment should therefore be confirmed before the component is scheduled into a production build.
What can replace DG202DY+?
A replacement must match the 16-SOIC footprint, provide four normally open SPST channels, preserve the DG202 control polarity, and remain within the required on-resistance and supply ratings. Related DG201 and DG212 devices use different control behavior and are not automatic replacements. The available cross-reference results do not identify five distinct pin-to-pin substitutes, so request a quote for the original MPN and use the manufacturer pin table for any proposed substitution.
Is DG202DY+ the same as DG212DY+?
No. The DG202DY+ and DG212DY+ are related but complementary-control devices within the Analog Devices DG202/DG212 family. The DG202 is identified as normally open, while the DG212 provides the alternate control behavior. They may share a package family, but matching packages alone do not make them drop-in equivalents because reversing control polarity can change the behavior of every channel.
What is the best Analog Devices equivalent for DG202DY+?
The closest verified Analog Devices selection is the DG202DY+ itself, because no distinct pin-to-pin replacement is identified in the available cross-reference results. A related DG202/DG212 device should not be called a drop-in equivalent unless its control polarity matches the original design. Use the official Analog Devices product page for the family datasheet and submit the Request a Quote form for supply of the exact ordering code.
Does the DG202DY+ avoid latch-up when its power is removed?
Yes. Analog Devices states that the DG202/DG212 switches will not latch up if the power supplies are disconnected while input signals remain connected. This feature improves robustness during unexpected power removal, although it does not remove all design obligations. Keep input signals within the absolute maximum ratings and follow the datasheet's supply and control sequencing guidance.
How should I design the PCB layout for DG202DY+?
Place the DG202DY+ close to the sources and destinations of its switched analog signals, and route each switched node over a continuous ground plane with no unintended signal crossings. Place supply-decoupling capacitors close to the relevant power pins and provide a short ground return. Because maximum on-resistance is 200 ohms, contamination and leakage can materially affect accuracy, so keep the switching region clean and use guarding techniques when leakage is significant.
Is DG202DY+ RoHS compliant?
The RoHS status is not established by the technical material listed for this product. Check the current compliance declarations and material documentation linked from the official Analog Devices DG202 product page before treating the part as compliant for a specific procurement or manufacturing requirement. If the declaration cannot be located, record the status as unknown rather than assuming that the product is RoHS compliant.

Dữ liệu tham khảo kỹ thuật cho DG202DY+ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose DG202DY+ when the design needs four normally open SPST analog paths, a 200-ohm maximum on-resistance, and operation across -18 V to +18 V dual supplies. Its 16-SOIC package is particularly useful when several independent sensor, test, or signal-conditioning paths must be routed under logic control. A single-channel SPST device may be simpler when only one path is required, while a multiplexer should be selected when the architecture demands more channels or lower resistance. The related DG201 and DG212 families must be checked for control polarity before substitution: a matching package does not make them interchangeable when the active control level changes. If accurate high-impedance measurements are central to the design, verify leakage, transition behavior, and external buffering rather than relying only on the 600-ns maximum on-time.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Package 16-SOIC
Brand Analog Devices
Number of Switches 4
Switch Configuration 4 x SPST, normally open
Maximum On-Resistance 200 ohm
Maximum On-Time 600 ns
Dual-Supply Operating Range -18 V to +18 V
Single-Supply Operating Range 4.5 V to 25 V
Operating Temperature -40 °C to +85 °C
Technology CMOS

Bảo phân biệt quan trọng

  • Four independent analog routes in one package (vsDG419DY+)
  • Fast controlled channel transitions (vsDG212DY+)
  • Supports bipolar and single-supply operation (vsDG212DY+)

Ghi chú thiết kế

Route each switched analog node over a continuous ground plane and minimize the distance from the DG202DY+ to the connected source and destination. The maximum on-resistance is 200 ohm, so trace resistance and contamination can represent a meaningful share of the total path impedance. Keep the switching area free of solder residue and avoid placing high-impedance routes adjacent to fast digital or switching-regulator nodes.

Place the supply-decoupling capacitors directly beside the DG202DY+ power pins and connect them to a low-impedance ground return. Maintain the -18 V to +18 V dual-supply limits, or use the documented 4.5 V to 25 V single-supply configuration as appropriate. Review absolute maximum ratings, control-input states, and signal amplitudes in the manufacturer datasheet before power sequencing or disconnecting supplies.

The 200-ohm maximum on-resistance makes the DG202DY+ most suitable for low- and medium-impedance analog paths. For high-impedance sensors, include off-state leakage, PCB contamination leakage, input capacitance, and switching transients in the error budget. When signal settling must be faster than the 600-ns on-time alone implies, add an external buffer or allow additional acquisition settling time.

Do not treat the related DG201 and DG212 devices as automatic replacements because their control polarity differs. Verify the active level of all four control inputs, confirm the normally open behavior, and review power-off conditions before layout release. Although the DG202 family is designed to avoid latch-up when supplies are disconnected with inputs still connected, normal operating limits and absolute maximum ratings still apply.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The DG202 family is listed as production by Analog Devices. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established by the cited technical material and remain unknown.

Dữ liệu được xác minh vào: 2026-11-10 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

DG202DY+ datasheet DG202DY+ pinout DG202DY+ datasheet pdf DG202DY+ specifications Analog Devices DG202DY+ DG202DY+ equivalent DG202DY+ replacement DG202DY+ drop-in replacement DG202DY+ vs DG212DY+ DG202DY+ 16-SOIC footprint DG202DY+ analog switch application DG202DY+ price DG202DY+ stock DG202DY+ SPST CMOS switch what is the on-resistance of DG202DY+

Các bộ phận và thuật ngữ liên quan

Analog Devices Maxim Integrated DG202DY+ DG202 DG212 DG201 DG419DY+ DG408DY+ DG444DJ+ analog switch CMOS analog switch SPST switch normally open switch interface IC semiconductor 16-SOIC SOIC package family surface mount SMD on-resistance on-time power-off protection analog signal routing data acquisition industrial process monitoring
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ