DG406DYZ - 16:1 CMOS Analog Multiplexer | Renesas
Teilenummer: DG406DYZ ✓ AktivDG406DYZ Übersicht
An analog multiplexer is a semiconductor switching network that connects one of several input terminals to a common output. It belongs to the analog switch and multiplexer hierarchy within interface ICs. By translating binary address and enable signals into controlled switch states, a multiplexer's digital control logic can route low-frequency analog signals without requiring a separate analog switch for every connection.
The DG406 family combines a 16-switch array with address-decoding circuitry in one monolithic CMOS device. Its TTL- and CMOS-compatible control inputs simplify interfacing with modern digital systems, while the voltage reference establishes consistent switching thresholds. The ENABLE input allows multiple multiplexers to share address lines and prevents unwanted paths from being connected when the device is disabled.
Renesas describes the DG406 and DG407 as drop-in replacements for the DG506A and DG507A series. That legacy continuity makes the DG406 useful in equipment designed around established 28-pin analog-routing interfaces. The principal design consideration is ensuring that signal amplitude, bandwidth, leakage, charge injection, and switching transients remain acceptable for the source and destination circuitry.
Typical applications include audio signal routing, communication systems, data-acquisition systems, guidance and control systems, sample-and-hold circuits, and test equipment. In a data-acquisition system, the device can route multiple sensor or measurement channels into a shared converter input. In audio equipment, it can select among several signal paths while preserving a common downstream amplifier or converter.
For PCB design, place the device so every selected analog trace remains short and away from high-speed digital and switching-power paths. Confirm input and output voltage limits, supply requirements, and the control-logic truth table in the manufacturer datasheet. Verify the supported switch configuration and signal polarity before finalizing differential routing.
This page organizes the DG406DYZ architecture, verified technical characteristics, same-footprint alternatives, and application-focused design guidance into a concise engineering reference for analog-routing designs.
Drop-in-Alternativen für DG406DYZ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit DG406DYZ (gleiche Bauform und Footprint) – abweichend in Package, Logic Threshold Reference, Number of Analog Switches, Number of Channels, Technology.
DG406DY-T
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →DG406DY
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →DG406DW-E3
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
DG406EWI+T
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
DG406EWI-T
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
DG406DN+T
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →DG406DYZ Technische Daten
| Multiplexer Configuration | Single 16:1 or differential 8:1 |
| Number of Circuits | 1 circuit |
| On-Resistance | 100 ohm |
| Number of Analog Switches | 16 switches |
| Technology | Monolithic CMOS |
| Address Input Compatibility | TTL and CMOS compatible |
| Logic Threshold Reference | Internal voltage reference |
| Enable Control | 1 ENABLE input |
| Anzahl der Pins | 28 pins |
| Gehäuse | 28-pin SOIC |
| Montageart | Surface mount |
| Betriebstemperaturbereich | -40°C to +85°C |
| Single-Ended Mode | 16 channels |
| Differential Mode | 8 channels |
DG406DYZ 28-pin soic Pinbelegungsleitfaden
Pinbelegung für DG406DYZ (28-pin soic-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für DG406DYZ.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
DG406DYZ ist geeignet für 6 Anwendungs: Data Acquisition Systems, Audio Signal Routing, Sample-and-Hold Circuits, Communication Systems, Guidance and Control Systems, Test and Measurement Equipment.
Data Acquisition Systems
The DG406DYZ is well suited to selecting among multiple analog measurement channels in a data-acquisition system. Its 16-switch array can route one single-ended source at a time or eight differential pairs, reducing the number of external signal paths entering a shared converter. The internal TTL- and CMOS-compatible decoding simplifies address generation, while the ENABLE input permits controlled isolation during reset or calibration. Design the source impedance and acquisition bandwidth around the switch's 100 ohm on-resistance and verify settling, leakage, and charge-injection requirements against the manufacturer datasheet.
Empfohlen
Audio Signal Routing
The DG406DYZ can route audio inputs or test signals through a common amplification and conversion chain. Its single-ended 16-channel configuration offers broad source selection, while differential 8-channel operation can support balanced audio paths. The 100 ohm on-resistance is modest for many line-level signals, although source impedance and the impedance seen by downstream amplifiers still determine practical loading. Use short, shielded analog traces and keep switching nodes away from clock and power-converter paths to reduce audible or measurable crosstalk.
Empfohlen
Sample-and-Hold Circuits
A DG406DYZ can select one of several sampled or sensed signals before feeding a sample-and-hold stage. The 16-switch array provides more channel density than a discrete analog switch network, and the address decoder allows firmware or a control counter to update the selected path. Timing must account for address propagation, switch settling, charge injection, and the acquisition interval. The ENABLE input can hold the multiplexer inactive while the hold circuit acquires, preventing an unintended source from disturbing the sampled node during critical conversion periods.
Empfohlen
Communication Systems
The DG406DYZ can consolidate several low-frequency analog communication paths into a shared receiver or measurement circuit. Its TTL- and CMOS-compatible address decoding supports integration with digital controllers, while the internal logic-threshold reference supports consistent decoding across compatible supply conditions. The ENABLE input is useful when multiple multiplexers share control lines or when the receiver must be isolated during channel changes. Validate signal bandwidth, insertion loss, off-channel isolation, and switch-transient behavior before using it in high-rate or precision communication links.
Empfohlen
Guidance and Control Systems
The DG406DYZ can multiplex feedback, position, or sensor signals into a shared control-processing input. Its 28-pin SOIC implementation and 16-switch array provide a compact way to organize several analog channels while keeping address and enable control in the digital domain. For safety- or mission-critical behavior, verify the exact pinout, power limits, operating temperature range of -40°C to +85°C, and fault behavior for the ordered device. The system should also disable the mux or select a defined fallback path during reset so the control input never floats unexpectedly.
Empfohlen
Test and Measurement Equipment
The DG406DYZ is applicable to test equipment that routes multiple test points, reference levels, or injected signals into a shared measurement chain. Sixteen single-ended inputs or eight differential pairs provide flexibility for automated fixtures. TTL- and CMOS-compatible decoding allows direct control from test sequencers, and the ENABLE input supports isolation between measurements. For precision instruments, characterize leakage, channel resistance, settling time, and crosstalk with the actual source impedance. Layout should preserve short return paths and minimize coupling from adjacent digital control and switching-supply nodes.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DG406DYZ – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DG406DY-T | DG406DY | DG406DW-E3 | DG406EWI+T | DG406EWI-T | DG406DN+T |
|---|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Maxim Integrated | Maxim Integrated | Analog Devices |
| Package | SOIC-28 | SOIC-28 | SOIC-28 | SOIC-28 | SOIC-28 | SOIC-28 | SOIC-28 |
| Number of Pins | 28 | 28 | 28 | 28 | 28 | 28 | 28 |
Wichtigste Unterscheidungsmerkmale
- Combines 16 physical switches with integrated channel decoding (vs. DG406DN+T)
- Supports single-ended and differential routing in one device (vs. DG406EWI+T)
- Compatible with both TTL and CMOS control systems (vs. DG406EWI-T)
Designhinweise
Treat the selected analog path as a switched 100 ohm resistance when assessing loading. Estimate the divider formed by that resistance and the input impedance of the receiving circuit, then confirm that the resulting attenuation remains acceptable. For high-impedance sensors, include amplifier input capacitance and cable capacitance in settling analysis. Keep the multiplexer output trace short and place any following buffer amplifier close enough to isolate the shared node from downstream loading.
Route each analog input directly to its assigned package pin and avoid crossing the paths with digital address lines, ENABLE, switching regulators, or high-current return paths. Use a continuous ground plane where the layout permits, but return the digital-control ground current directly to the device ground rather than through the analog input area. Separate the shared analog output route from neighboring high-speed nets and provide a nearby return path to minimize loop area and coupling.
Do not assume that the 28-pin package alone guarantees substitution. Verify the complete pin names, ENABLE polarity, address truth table, supply requirements, logic thresholds, input and output voltage limits, and differential-routing connections against the manufacturer datasheet. Also check whether an alternative uses different switched-pin or common-pin assignments, because those differences can prevent operation even when the land pattern and channel count appear identical.
Allow adequate acquisition time after changing address and ENABLE states. The settling interval must include address-decoder propagation, switch-transition behavior, charge injection, and the acquisition time required by the downstream converter or sample-and-hold circuit. A fixed delay that works with one source impedance may be inadequate with a different cable or sensor. Establish timing from worst-case signal amplitude, source impedance, temperature, and system tolerance rather than from nominal timing alone.
Compliance-Informationen
No definitive compliance declarations were identified in the product-page and distributor snippets. The DG406 family is not stated to be AEC-Q100 qualified; confirm the ordered part's qualification status with the manufacturer before automotive use.