Analog Devices

DG411CY+T - Quad SPST Analog Switch | Analog Devices

Teilenummer: DG411CY+T ✓ Aktiv
2.7 V to 12 V Vdss 45 ohm Rds(on) 16-pin SOIC Package
MOQ: 1 |

DG411CY+T Übersicht

The Analog Devices DG411CY+T is a quad, independently controlled, SPST analog switch with a 1:1 signal configuration, 45 ohm on resistance, and a 16-pin SOIC package. It is designed to route low-voltage analog or digital signals when low power consumption, compact integration, and bidirectional conduction are important. The device combines four switches in one package, reducing board area compared with discrete single-channel implementations.

An analog switch is an integrated semiconductor that connects or disconnects signal paths under digital control. The DG411 family belongs to the broader switch and multiplexer hierarchy, where multiplexers combine multiple inputs onto an output and demultiplexers distribute one input among several outputs. This particular quad SPST architecture gives each switch an independent path rather than sharing a common internal channel.

Key features include four 1:1 switch channels, 45 ohm nominal on resistance as identified for the DG411CY+T listing, on-resistance matching within 3 ohm maximum between switches, and on-resistance flatness within 4 ohm maximum over the signal range. The family also provides low charge injection, low power consumption, and ESD tolerance of at least 2000 V according to the Analog Devices data sheet.

The DG411CY+T uses independently driven control inputs and is intended for low-voltage signal routing. According to the manufacturer information, the switches conduct equally well in either direction while the device is on. This bidirectional behavior makes the switch suitable for systems where the signal source can move between input and output roles, such as selectable test paths, measurement interfaces, and compact control systems.

Typical uses include sample-and-hold systems, test and measurement equipment, battery-powered instruments, industrial control interfaces, and audio or communication signal routing. Four independently controlled switches can implement four separate point-to-point paths, while the 16-pin SOIC package supports conventional surface-mount assembly and straightforward PCB fanout.

Designers should pay attention to control logic levels, supply voltage, signal amplitude, and switch timing before assigning a signal. Keep routing short, provide a stable ground reference, and avoid exceeding the voltage limits specified for the control inputs and switched terminals. The analog manufacturer data sheet should be used as the authoritative reference for the complete pin assignment and electrical limits.

Drop-in-Alternativen für DG411CY+T – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit DG411CY+T (gleiche Bauform und Footprint) – abweichend in Number of Switches, Package, Switch Configuration.

Vishay Intertechnology
Number of Switches: 4 (quad)
Package: 16-SOIC (0.154 in, 3.90 mm width)
Switch Configuration: SPST, 1:1 (four independent)
Vergleichen mit DG411CY+T →

DG411DY-E3

✅ Drop-In
Vishay Intertechnology
📦 16-SOIC
Precision Monolithic Quad SPST CMOS Analog Switch · 4 (quad) · SPST, 1:1 (four independent) · 35 Ohm · CMOS · 0.35 uW (low power) · TTL and CMOS compatible · 15 V / 18 V / 24 V / 28 V class (per distributor listing)

Preis auf Anfrage

Datenblatt ansehen →

ADG411

✅ Drop-In
📦 16-SOIC
Same 4-channel SPST function and 16-pin package; on-resistance difference versus 45 ohm is 0 ohm at the compared family level

📋 Referenzalternative (nicht im Katalog)

DG411FEUE+T

✅ Drop-In
📦 16-SOIC
Same 4-channel SPST switching family in 16-SOIC; performance difference versus the 45 ohm target value is 0 ohm

📋 Referenzalternative (nicht im Katalog)

DG411DY-E3

✅ Drop-In
Vishay Intertechnology
📦 16-SOIC
Precision Monolithic Quad SPST CMOS Analog Switch · 4 (quad) · SPST, 1:1 (four independent) · 35 Ohm · CMOS · 0.35 uW (low power) · TTL and CMOS compatible · 15 V / 18 V / 24 V / 28 V class (per distributor listing)

Preis auf Anfrage

Datenblatt ansehen →

DG411LDY-T1

✅ Drop-In
📦 16-SOIC
Shared 16-SOIC footprint and 2.7 V to 12 V supply range; documented 17 ohm maximum on resistance versus 45 ohm for the target listing, a 28 ohm lower value

📋 Referenzalternative (nicht im Katalog)

DG411CY+T Grenzwerte & elektrische Eigenschaften

Number of Switches 4 circuits
Switch Configuration 4 x SPST
Signal Configuration 1:1
On Resistance 45 ohm
On-Resistance Matching Between Switches 3 ohm maximum
On-Resistance Flatness Over Signal Range 4 ohm maximum
Supply Voltage Range 2.7 V to 12 V
ESD Tolerance 2000 V minimum
Gehäuse 16-pin SOIC
Montageart Surface Mount
Conduction Direction Bidirectional
Control Interface 4 independent digital control inputs

DG411CY+T 16-pin soic Pinbelegungsleitfaden

Pinbelegung für DG411CY+T (16-pin soic-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für DG411CY+T im 16-pin soic-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für DG411CY+T.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

DG411CY+T ist geeignet für 6 Anwendungs: Test and Measurement Signal Routing, Battery-Powered Instrumentation, Industrial Control Interfaces, Audio Signal Selection, Communication Equipment, Data Acquisition and Sample Paths.

🔧

Test and Measurement Signal Routing

The DG411CY+T is well suited to compact test and measurement systems that require several independently controlled analog paths. Each of its 4 SPST channels can connect a source to a measurement instrument without requiring four separate single-switch packages. The 16-SOIC footprint keeps routing compact, while the family’s 3 ohm maximum matching and 4 ohm maximum flatness help maintain similar channel behavior. Because the DG411CY+T is rated at 45 ohm, engineers should include insertion loss, source impedance, and load impedance in the error budget rather than treating it as an ideal closed contact.

🔋

Battery-Powered Instrumentation

The DG411CY+T can route low-level signals in battery-powered instruments where component count and switching power both matter. Four independently controlled switches are integrated into one 16-pin SOIC package, reducing board space and external control overhead. Its stated 2.7 V to 12 V single-supply range accommodates common portable-system rails. The switch’s low power consumption supports instrumentation designs, while the 45 ohm on resistance must be checked against the source and load impedances to prevent excessive attenuation or measurement error.

🏭

Industrial Control Interfaces

The DG411CY+T provides a practical way to route control, feedback, or sensor signals in industrial interfaces with multiple branches. Four SPST switches can independently isolate or connect circuits, and the normally closed configuration can support default signal paths when control commands are inactive. Bidirectional conduction allows the same switch arrangement to handle signals traveling in either direction. Industrial implementations should verify logic thresholds, transient levels, operating temperature, and grounding against the manufacturer data sheet before connecting long wiring or noisy equipment to the switched nodes.

🎧

Audio Signal Selection

The DG411CY+T can implement source selection for low-level audio lines when a resistive signal path is acceptable. Its 4 independently selectable SPST channels support left and right routing, monitoring, mute, or test-point functions in one compact package. The on-resistance matching within 3 ohm maximum and flatness within 4 ohm maximum help preserve channel consistency, although the 45 ohm rating introduces attenuation that depends on the source and load. Confirm the complete audio frequency response and acceptable distortion in the manufacturer data sheet before using the device in precision audio paths.

🌐

Communication Equipment

The DG411CY+T is useful in communication equipment that needs controlled routing of low-voltage command, monitor, or status signals. The four 1:1 switches provide independent paths for multiplexing functional resources without sharing a common multiplexer channel. Bidirectional operation supports both transmit-monitor and receive-route arrangements. System designers should use the 2.7 V to 12 V operating range as the supply constraint, maintain short high-impedance routing where possible, and confirm that the 45 ohm path resistance is acceptable for the interface being switched.

📡

Data Acquisition and Sample Paths

The DG411CY+T can control several acquisition paths when the switched signals are referenced to high source impedances. Its four independent SPST channels make it possible to route a sensor, reference, or test signal under digital supervision. The family’s specified on-resistance matching of 3 ohm maximum and flatness of 4 ohm maximum support consistent behavior across channels. For precision conversion systems, calculate the gain error caused by the 45 ohm switch resistance, use a high-impedance buffer when required, and keep switch transients away from sensitive sampling nodes.

Zusammenfassung der empfohlenen Produkte

DG411CY+ Same quad SPST analog-switch family Verwendet in: Test and Measurement Signal Routing, Audio Signal Selection ADG411 Four-channel SPST routing alternative Verwendet in: Test and Measurement Signal Routing, Industrial Control Interfaces, Audio Signal Selection, Data Acquisition and Sample Paths DG411DY Same-family portable instrumentation option Verwendet in: Battery-Powered Instrumentation, Communication Equipment DG411LDY-T1 Pin-compatible low-resistance cross-brand option Verwendet in: Battery-Powered Instrumentation, Data Acquisition and Sample Paths DG411DY-E3 Vishay Intertechnology Verwendet in: Industrial Control Interfaces DG411FEUE+T Same-package alternate ordering variant Verwendet in: Communication Equipment
What is the DG411CY+T?
The DG411CY+T is a 4-circuit, 1:1, normally closed SPST analog switch manufactured by Analog Devices. According to the Analog Devices DG411 data sheet, Rev. 7, it uses four independent switch channels, provides 45 ohm on resistance for the DG411CY+T ordering variant, and is packaged in a 16-pin SOIC. It is intended for low-voltage analog signal routing and supports bidirectional conduction.
What are the key specifications of DG411CY+T that engineers should know?
The DG411CY+T combines 4 SPST channels, 45 ohm on resistance, and a 16-pin SOIC package in one low-power device. The Analog Devices DG411 data sheet, Rev. 7, also identifies on-resistance matching within 3 ohm maximum, flatness within 4 ohm maximum, ESD tolerance of at least 2000 V, and a 2.7 V to 12 V supply range. These characteristics make the device suitable for compact, independently controlled signal-routing circuits.
Is DG411CY+T pin compatible with DG411DY?
Yes, the DG411CY+T can serve as a drop-in choice for the DG411DY in designs using the 16-pin SOIC footprint. Both devices are four-channel SPST analog switches in the same package, and the available comparison identifies the same mounting style, channel count, and configuration. Confirm control polarity, supply limits, temperature grade, and analog signal limits against the manufacturer data sheet before production substitution.
What is the difference between DG411CY+T and DG411DY?
The principal documented difference is the ordering suffix and package temperature or grade treatment rather than the basic four-channel SPST architecture. The DG411CY+T is identified as a 16-SOIC device with 45 ohm on resistance, while the DG411DY comparison also identifies a 16-SOIC quad SPST switch. Review the orderable-temperature table and electrical-characteristics limits in the manufacturer data sheet before treating either suffix as interchangeable.
What is the best drop-in replacement for DG411CY+T?
The ADG411 is a strong same-manufacturer alternative when a 16-pin, four-channel SPST switching function is required. The Analog Devices product description identifies it as four independently selectable CMOS switches with low on resistance and high switching speed. DG411DY and DG411DY-E3 are additional 16-SOIC options, but exact substitution requires checking control polarity, voltage limits, temperature grade, and the complete pin map.
Can ADG411 replace DG411CY+T?
The ADG411 can be considered for a DG411CY+T replacement when its control polarity, supply voltage, and pin assignment match the existing board. Both devices provide four independently controlled SPST switches in a 16-pin package. The DG411CY+T is specified at 45 ohm on resistance, so use the ADG411 data sheet to confirm its own maximum on resistance and switching characteristics before approving the change.
What is the best Vishay Siliconix equivalent for DG411CY+T?
The Vishay Siliconix DG411LDY-T1 is the documented cross-brand option for a direct functional and pin-compatible replacement. The manufacturer-related comparison identifies a shared 16-SOIC package, a 2.7 V to 12 V single-supply range, 17 ohm maximum on resistance, and closely aligned timing and leakage characteristics. Validate absolute maximum ratings and temperature limits against the complete data sheets.
Where to download the DG411CY+T datasheet PDF?
The official DG411CY+T documentation is available through the Analog Devices DG411 product page at analog.com/en/products/dg411.html. The page identifies the product as an improved quad SPST analog switch and links its data sheet, identified as Rev. 7 in the product documentation. Use the manufacturer data sheet for the authoritative package drawing, pin assignments, recommended operating conditions, and electrical characteristics.
Where can I find the DG411CY+T pinout?
The DG411CY+T pinout is documented in the pin-configuration and ordering-information sections of the Analog Devices DG411 manufacturer data sheet, Rev. 7. The device uses a 16-pin SOIC package. Assign PCB tracks from that table, including the location of each control input, switched terminal, supply pin, and ground pin, rather than relying only on a generic SOIC-16 drawing.
Where can I buy DG411CY+T online?
The DG411CY+T can be requested through the Request a Quote form on this product page. The form is the appropriate route for current unit availability, quantity breaks, lead time, and order confirmation. The manufacturer product page also provides a Sample & Buy route, while the exact commercial terms for the packaged order should be confirmed through the quote workflow.
What is the lead time for DG411CY+T?
The current lead time for DG411CY+T should be confirmed through the Request a Quote form on this page. Lead time depends on order quantity, package form, manufacturing availability, and the distributor channel selected for fulfillment. Submit the required quantity and target assembly location with the request so the commercial response reflects the appropriate production schedule.
Is DG411CY+T in stock?
Current DG411CY+T inventory should be checked through the Request a Quote form on this page rather than inferred from general distributor availability. The manufacturer lists the DG411 family in production, and multiple authorized-channel listings identify the DG411CY+T ordering variant. Request a formal availability confirmation for the required quantity to obtain a reliable fulfillment response.
When should I choose DG411CY+T over ADG411?
Choose the DG411CY+T when your design needs the DG411 family, a 16-pin SOIC footprint, and four independent SPST paths at 45 ohm on resistance. Choose the ADG411 when its specific low on-resistance and switching-speed characteristics better match the signal path, while its control polarity and pin assignment remain compatible. Final selection should consider voltage tolerance, bandwidth, channel matching, and thermal operating requirements.
Is DG411CY+T suitable for test and measurement equipment?
Yes, the DG411CY+T is suitable for compact test and measurement signal routing because it provides 4 independently controlled SPST switches with bidirectional conduction. Its 16-pin SOIC package reduces board space, and the family data sheet identifies on-resistance matching within 3 ohm maximum and flatness within 4 ohm maximum. The 45 ohm rated variant is most appropriate for moderate-impedance paths rather than low-impedance precision networks.
How should DG411CY+T be used in an analog signal path?
Use the DG411CY+T as a controlled shunt or routing element between an analog source and its destination. Because the switch is normally closed and has 45 ohm on resistance, account for insertion loss and the voltage drop created by source and load impedance. Keep traces short, provide a low-impedance ground, observe control-logic levels, and verify switch behavior across the intended signal amplitude and frequency.

Technische Referenzdaten für DG411CY+T – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the DG411CY+T when the design requires the DG411 family, four independent normally closed SPST paths, and a 16-pin SOIC footprint at a nominal 45 ohm on resistance. Choose ADG411 when its documented switching speed or lower on-resistance is better suited to the signal path and its control polarity matches the PCB. Choose DG411DY or DG411DY-E3 for same-package family continuity after checking temperature grade and ordering details. Consider DG411LDY-T1 when lower insertion loss is important: its documented 17 ohm maximum resistance is 28 ohm below the DG411CY+T listing, but qualification and production requirements must be reviewed. In every case, verify pin polarity, absolute maximum voltages, operating temperature, signal bandwidth, and the attenuation introduced by the on resistance.

Vergleich mit Alternativen

Parameter Dieses Produkt DG411DY ADG411 DG411FEUE+T DG411DY-E3 DG411LDY-T1
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Vishay Intertechnology
Number of Switches 4 4 4 4 4 4
Switch Configuration 4 x SPST 4 x SPST 4 x SPST 4 x SPST 4 x SPST 4 x SPST

Wichtigste Unterscheidungsmerkmale

  • Four independent signal paths in one compact package (vs. DG411LDY-T1)
  • Lower documented on-resistance for the cross-brand alternative (vs. DG411LDY-T1)
  • Same-manufacturer family continuity (vs. ADG411)
  • Documented channel consistency (vs. DG411DY)

Designhinweise

Treat the switch as a 45 ohm series element rather than an ideal connection. For a source resistance Rs and load resistance RL, the inserted path forms a divider with the 45 ohm on resistance. Use the divider ratio to estimate insertion loss, and add the switch resistance to the source impedance when evaluating sensor accuracy. High-impedance buffers can be added when the calculated attenuation exceeds the system error budget.

Route each switched terminal directly to the protected source or destination and keep the loop area small to minimize pickup of switching transients. Place the device ground connection close to the package and provide a low-impedance return path. For long external cables, use protection structures at the connector rather than relying on the switch alone. Confirm the package pin assignment from the Analog Devices DG411 data sheet, Rev. 7, before finalizing artwork.

Do not infer control polarity or normally closed behavior from a generic analog-switch pinout. Verify every control input, supply pin, ground pin, and switched terminal against the exact manufacturer pin table. Also check the maximum terminal voltage, control-input logic levels, and operating temperature. A suffix with the same SOIC-16 outline can still differ in grade, marking, qualification, or ordering conditions.

The device operates from a 2.7 V to 12 V single supply according to the documented DG411 family comparison. Ensure that control levels remain valid at the selected supply voltage and that unused control inputs are tied to a defined state. Decouple the supply close to the device with the capacitance recommended in the manufacturer application guidance, and avoid switching terminal voltages that exceed the absolute maximum ratings.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The DG411CY+T is an industrial and commercial analog switch; no vehicle-specific AEC-Q100 qualification is identified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or the relevant declaration.

Ähnliche Suchanfragen

DG411CY+T datasheet DG411CY+T pinout DG411CY+T datasheet pdf DG411CY+T equivalent DG411CY+T replacement DG411CY+T drop-in replacement DG411CY+T price DG411CY+T stock DG411CY+T vs ADG411 DG411CY+T 16-SOIC footprint Analog Devices DG411CY+T DG411CY+T quad SPST switch

Verwandte Bauteile & Begriffe

Analog Devices DG411CY+T DG411 DG411DY ADG411 DG411LDY-T1 analog switch SPST switch normally closed switch quad switch multiplexer demultiplexer semiconductor on resistance on-resistance matching on-resistance flatness charge injection bidirectional conduction 2.7 V to 12 V supply 16-SOIC package SOIC family surface-mount package test and measurement industrial control data acquisition
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen