DS90CF384AMTDX - 24-Bit 3.3V LVDS Receiver | Texas Instruments
Teilenummer: DS90CF384AMTDX ✓ AktivDS90CF384AMTDX Übersicht
An LVDS receiver is an interface circuit that converts differential data signals into logic-level signals for the receiving system. LVDS, or low-voltage differential signaling, belongs to the interface IC category and supports high-speed data transfer over balanced interconnects. The DS90CF384AMTDX is used in display applications where a transmitter sends serialized pixel or control data over a differential link and the receiver restores usable digital data for downstream logic.
Key features of the device include its +3.3 V supply operation, 24-bit flat panel display link support, 65 MHz operating frequency and 56-pin TSSOP package. The 56-pin package provides the physical interface for the receiver's digital, differential and power connections. The listed operating temperature range is -10 °C to +70 °C, making the device suitable for commercial and industrial equipment where that temperature range is acceptable.
The DS90CF384AMTDX is specifically identified as an LVDS interface IC for 24-bit flat panel display links. In a typical link, the receiver accepts low-voltage differential data from a display transmitter, applies receiver functions designed for the LVDS interface, and presents recovered data to the display or video processing circuitry. Designers should pay close attention to trace geometry, connector and cable topology, supply decoupling and the timing relationship between the transmitter and receiver.
Typical uses include flat panel display controllers, monitor and television interface boards, industrial display equipment, test systems for display links and embedded display subsystems. The receiver can be considered when the system already uses an LVDS display link and requires a 24-bit, 65 MHz class receiver in a 56-pin TSSOP footprint.
A key design consideration is the use of controlled-impedance differential routing and a properly engineered connector or cable path. Keep the receiver supply and ground connections close to the device, follow the manufacturer's recommended decoupling arrangement and validate the complete transmitter-to-receiver channel for eye margin, jitter and common-mode behavior. The DS90CF384AMTDX should be selected only when its 3.3 V supply, 24-bit link, 65 MHz frequency and TSSOP package requirements match the existing system.
This product page combines manufacturer identification, interface parameters, package information, sourcing guidance and practical considerations for evaluating the DS90CF384AMTDX in a flat panel display receiver design.
Drop-in-Alternativen für DS90CF384AMTDX – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
DS90CF384AMTD/NOPB
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
DS90CF384AMTDX/NOPB
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
DS90CF384AMTDX Technische Daten
| Device Type | +3.3 V LVDS Receiver |
| Display Link Data Width | 24 bit |
| Operating Frequency | 65 MHz |
| Datenrate | 1800 Mbps |
| Versorgungsspannung | +3.3 V |
| Schnittstellentyp | Low-Voltage Differential Signaling (LVDS) |
| Application | Flat Panel Display Link |
| Gehäuse | 56-pin TSSOP (DGG) |
| Pin-Anzahl | 56 pins |
| Betriebstemperaturbereich | -10 °C to +70 °C |
| Montageart | Surface Mount |
| Manufacturer | Texas Instruments |
DS90CF384AMTDX 56-pin tssop (dgg) Pinbelegungsleitfaden
Pinbelegung für DS90CF384AMTDX (56-pin tssop (dgg)-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für DS90CF384AMTDX.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
DS90CF384AMTDX ist geeignet für 6 Anwendungs: Flat Panel Monitor Receiver, Industrial Display Controller, Display Test Equipment, Video Processing Interface, Embedded Display System, Broadcast and Studio Display Interface.
Flat Panel Monitor Receiver
The DS90CF384AMTDX fits a flat panel monitor receiver stage when the display link uses a compatible 24-bit LVDS protocol at 65 MHz. It receives serialized differential display data and provides the interface toward the downstream display-processing circuitry. The +3.3 V supply aligns with many modern display-controller power domains, while the 56-pin TSSOP supports a conventional surface-mount layout. The design should preserve controlled-impedance differential routing, provide local supply decoupling and verify connector or cable losses before operation. Because the listed temperature range is -10 °C to +70 °C, enclosure temperature must be checked against that limit.
Empfohlen
Industrial Display Controller
The DS90CF384AMTDX can be used in an industrial display controller when the equipment remains within its published -10 °C to +70 °C operating range. Its 24-bit FPD Link capability and 65 MHz operating frequency are suitable for a receiver-side link to a compatible panel interface. The +3.3 V supply simplifies integration with low-voltage display logic, but the system designer must still provide a clean 3.3 V rail and careful LVDS routing. Industrial enclosure temperature, grounding and cable length should be evaluated together because the receiver specification does not by itself guarantee performance for every cable or connector implementation.
Empfohlen
Display Test Equipment
The DS90CF384AMTDX is suitable for a display-link test fixture or receiver card that reproduces a 24-bit LVDS FPD interface at 65 MHz. Its receiver function can be paired with a compatible transmitter, pattern generator or display test platform to exercise cables, connectors and downstream video logic. The 56-pin TSSOP package allows the receiver to be placed close to the input connector, which helps minimize routing sensitivity. Design the fixture with controlled-impedance differential pairs and observe differential voltage and timing at the receiver. Keep the card temperature within -10 °C to +70 °C and confirm the exact protocol before using the fixture as a production test path.
Empfohlen
Video Processing Interface
The DS90CF384AMTDX can serve as the display-side receiver in a video processing subsystem that communicates with a compatible LVDS transmitter over a 24-bit FPD Link. The 65 MHz receiver class and listed 1800 Mbps data rate align with high-speed serialized display links, while the +3.3 V operating supply simplifies interface with digital logic. Placement near the display connector helps keep the differential pair short and reduces sensitivity to routing discontinuities. The processing board still needs independent power sequencing and grounding, and the receiver's -10 °C to +70 °C range must be respected in the final equipment.
Empfohlen
Embedded Display System
The DS90CF384AMTDX is appropriate for an embedded display subsystem that receives serialized panel data over a compatible 24-bit LVDS FPD Link at 65 MHz. Its small 56-pin TSSOP footprint supports compact controller boards, and the +3.3 V supply is convenient for embedded logic that already operates at 3.3 V. Integration requires a matched transmitter, correctly terminated differential inputs and PCB routing based on the manufacturer's interface recommendations. Because no public complete pin list is reproduced here, use the pin-description table in the Texas Instruments datasheet for board construction. Check the final enclosure temperature against the -10 °C to +70 °C operating range.
Empfohlen
Broadcast and Studio Display Interface
The DS90CF384AMTDX may be used in a broadcast or studio display interface when the source equipment implements a compatible 24-bit LVDS FPD Link at 65 MHz. The device provides the receiver function required at the panel end of the link, while its +3.3 V supply and surface-mount TSSOP package support compact interface cards. Signal-integrity quality depends on the complete transmitter, cable, connector and receiver path, so validate eye margin and jitter in the assembled system. The device's listed -10 °C to +70 °C operating range also requires consideration in studio equipment where internal temperature may exceed the surrounding room temperature.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DS90CF384AMTDX – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DS90CF384AMTD/NOPB | DS90CF384AMTDX/NOPB |
|---|---|---|---|
| Package | 56-pin TSSOP (DGG) | 56-pin TSSOP (DGG) | 56-pin TSSOP (DGG) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Device Type | +3.3 V LVDS Receiver | +3.3 V LVDS Receiver | +3.3 V LVDS Receiver |
| Display Link Data Width | 24 bit | 24 bit | 24 bit |
| Operating Frequency | 65 MHz | 65 MHz | 65 MHz |
| Supply Voltage | +3.3 V | +3.3 V | +3.3 V |
| Lead-Free Ordering Designation | Target ordering code does not include /NOPB | /NOPB included | /NOPB included |
Wichtigste Unterscheidungsmerkmale
- Matches the required 24-bit 65 MHz LVDS display-link role (vs. DS90CF384AMTD/NOPB)
- Provides an exact lead-free ordering option (vs. DS90CF384AMTDX/NOPB)
- Suited to compact display-interface boards (vs. DS90CF384AMTD/NOPB)
Designhinweise
Route the LVDS differential pair as a controlled-impedance, tightly coupled pair from the receiver to the connector or cable interface. Avoid stubs, test pads and right-angle discontinuities where possible, and use the manufacturer's pin-description table and layout guidance when assigning the differential inputs. Keep unrelated noisy switching nodes away from the receiver because the device is intended for high-speed differential display signaling.
Do not treat DS90CF384AMTDX, DS90CF384AMTD/NOPB and DS90CF384AMTDX/NOPB as interchangeable without checking the exact ordering suffix, marking and temperature information. The verified listings associate all three names with the same receiver family and 56-pin TSSOP package, but suffix handling can affect procurement labeling. Use the manufacturer part details and datasheet as the final authority for pin, grade and qualification decisions.
Provide a stable +3.3 V supply and place the required local decoupling close to the device power and ground pins. Keep return-current paths short and use a quiet ground reference for the interface circuitry. Decoupling values and placement should follow the manufacturer recommendations because no complete external-capacitor schedule was established by the verified product snippets.
Validate the complete transmitter-to-receiver path rather than evaluating only the receiver IC. Check differential input amplitude, common-mode voltage, eye margin and jitter with the intended connector and cable. The device is identified as a 65 MHz, 24-bit LVDS FPD Link receiver, but practical link performance also depends on source-device output, board geometry, cable length and termination strategy.
Confirm that the assembled board and enclosure remain within the listed -10 °C to +70 °C operating range. The TSSOP package provides a compact surface-mount footprint, but the available information does not establish a specific junction-temperature rating or thermal resistance. Use conservative ambient limits and manufacturer thermal information during final reliability analysis rather than inferring a thermal figure from the package name.
Compliance-Informationen
The verified product information does not state the compliance status of the exact DS90CF384AMTDX ordering code. The /NOPB suffix on listed alternates identifies a lead-free ordering designation, but it is not used here as proof of every compliance category.