Texas Instruments

DS90CR282MTD - 28-Bit LVDS Channel-Link Receiver | Texas Instruments

Teilenummer: DS90CR282MTD ✓ Aktiv
4.5 V to 5.5 V Vdss 56-TSSOP Package
MOQ: 1 |

DS90CR282MTD Übersicht

Texas Instruments DS90CR282MTD is a 28-bit Channel-Link receiver that recovers four parallel LVDS data streams and an embedded differential clock from a serialized source. It operates from a 4.5 V to 5.5 V supply and is packaged in a 56-pin TSSOP. The receiver converts four differential LVDS data pairs into 28 parallel CMOS/TTL output bits while supporting high-speed point-to-point digital links.

A Channel-Link receiver is a specialized interface IC that bridges the voltage and signaling domains between a high-speed differential transmitter and downstream parallel logic. The DS90CR282MTD belongs to the broader low-voltage differential signaling interface hierarchy: Channel-Link receiver, differential line receiver, digital interface IC, and semiconductor. Its role is to deserialize or reconstruct parallel data from a compact group of differential conductors, reducing connector pin count while preserving a parallel data presentation to the receiving system.

The principal interface characteristics include a 28-bit parallel data width, four LVDS data streams, LVDS protocol support, and a 4.5 V to 5.5 V supply range. These features make the device applicable to industrial control systems, digital video processing, instrumentation, test equipment, and embedded systems that use a Channel-Link transmitter such as the DS90CR281. The wide parallel output interface allows each recovered bit to be routed directly into FPGA, ASIC, or other digital logic.

Operationally, the receiver relies on differential signaling to reject common-mode voltage and reduce sensitivity to noise encountered along a cable or PCB interconnect. Differential clock recovery coordinates the parallel outputs, while the four LVDS lanes carry groups of serialized data. Board-level implementation must preserve controlled impedance, short return paths, and adequate coupling between the transmitter and receiver. Power and ground distribution should be planned to prevent simultaneous output switching from disturbing adjacent sensitive circuitry.

Typical uses include transferring control and pixel data in video-processing equipment, transporting automation commands between distributed controllers, and carrying parallel bus data over a compact cable connection. The interface is particularly useful when a design already uses a Channel-Link-compatible transmitter and therefore benefits from a standard 28-bit parallel receiver architecture.

A principal design consideration is signal integrity. The differential pairs require matched routing, suitable layer-stack geometry, and compliant LVDS input capacitance. The supply rails need local high-frequency decoupling, while the parallel output timing budget must include receiver latency and clock-alignment requirements. Power sequencing and signal integrity should be evaluated together because a stable supply does not compensate for an incorrectly implemented differential channel.

This product overview combines the confirmed device identity, interface width, supply range, protocol, package, and packaging information with practical guidance for LVDS routing, decoupling, timing, and source selection. It also distinguishes direct drop-in alternatives from related Channel-Link parts that may require a different transmitter, voltage, protocol, or board footprint.

Drop-in-Alternativen für DS90CR282MTD – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit DS90CR282MTD (gleiche Bauform und Footprint) – abweichend in Packaging.

Texas Instruments
Packaging: Tape & Reel (TR)
Vergleichen mit DS90CR282MTD →

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

DS90CR282MTD Technische Daten

Device Type Receiver
Product Family 28-Bit Channel Link
Parallel Data Width 28 bits
LVDS Data Streams 4 streams
Supply Voltage Range 4.5 V to 5.5 V
Protocol LVDS
Gehäuse 56-TSSOP
Package Body Width 6.10 mm
Package Body Height 0.240 mm
Packaging Tube
Montageart Surface Mount
Logic Interface CMOS/TTL

DS90CR282MTD 0.240 mm Pinbelegungsleitfaden

Pinbelegung für DS90CR282MTD (0.240 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für DS90CR282MTD im 0.240 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für DS90CR282MTD.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

DS90CR282MTD ist geeignet für 6 Anwendungs: Industrial Control and Automation Links, Digital Video Processing Equipment, Test and Measurement Instrumentation, Embedded Backplane Communication, FPGA Data Acquisition Cards, Telecommunications and Network Equipment.

🏭

Industrial Control and Automation Links

DS90CR282MTD is suitable for an industrial automation controller that must receive grouped parallel data from a distant or separately powered subsystem. Its four LVDS streams provide a compact differential transport path, while the 28-bit CMOS/TTL output can connect directly to controller logic operating from a 4.5 V to 5.5 V supply. The design should preserve matched differential-pair geometry, maintain a continuous ground reference, and verify receiver timing against the transmitting equipment. Cable length, data rate, connector losses, and isolation boundaries determine how much additional interface protection and equalization may be required.

📺

Digital Video Processing Equipment

DS90CR282MTD can serve as the receiving boundary in video-processing equipment when an upstream Channel-Link transmitter serializes pixel, control, or configuration data. The receiver restores the data to a 28-bit parallel bus for an FPGA, ASIC, or digital processor, reducing interconnect width compared with carrying all bits individually. The 4.5 V to 5.5 V supply aligns with a conventional 5 V interface domain. Engineering validation must cover video timing, clock alignment, lane skew, connector behavior, and the exact mapping between transmitted bits and downstream logic.

🔧

Test and Measurement Instrumentation

DS90CR282MTD is appropriate for test and measurement instruments that separate acquisition or processing hardware from a remote front end. Four differential LVDS streams can carry grouped control or result data across a defined board or cable distance, and the receiver delivers the information as a 28-bit parallel bus for timing-critical processing. Because measurement systems often combine sensitive analog and digital circuitry, the interface section should use controlled-impedance routing, local supply decoupling, and deliberate return-current paths. Validate the supported data rate, receiver latency, and signal-loss margin at the intended connection length.

🖥️

Embedded Backplane Communication

DS90CR282MTD can be used in an embedded backplane when a central transmitter distributes grouped digital data to receiver modules. The four LVDS streams limit the number of high-speed conductors compared with a 28-bit parallel bus, while the recovered parallel outputs simplify the interface to local programmable logic. The 56-pin TSSOP package supports conventional surface-mount assembly, and tube packaging accommodates production handling. Backplane engineers should account for connector and trace loss, lane-to-lane skew, reference-plane continuity, and the allowable loading of every receiver input.

🖥️

FPGA Data Acquisition Cards

DS90CR282MTD is useful in an FPGA acquisition card when the source subsystem serializes multiple data channels and the FPGA requires a parallel reconstruction. The receiver's 28-bit output can feed registers or block RAM, allowing the four LVDS streams to represent a wider logical payload than any single pair can carry. The interface operates from a 4.5 V to 5.5 V supply, but the output voltage compatibility must still be checked against the FPGA bank voltage. Layout should minimize stubs, maintain symmetrical pair spacing, and define timing constraints using the receiver's clock and latency characteristics.

🌐

Telecommunications and Network Equipment

DS90CR282MTD can support internal high-speed links in telecommunications equipment where a parallel functional block must communicate with another circuit board across a controlled differential connection. Four LVDS streams offer a practical way to carry grouped control, payload, or status bits, and the receiver outputs them in a 28-bit parallel format for downstream line-card logic. The implementation should separate the interface from noisy switching sections, use a solid reference plane, and apply decoupling close to the supply pins. Production qualification should confirm operating temperature, lifecycle status, and environmental compliance for the exact assembled system.

Zusammenfassung der empfohlenen Produkte

DS90CR281 Compatible 28-bit Channel-Link transmitter Verwendet in: Industrial Control and Automation Links, Digital Video Processing Equipment, Test and Measurement Instrumentation, FPGA Data Acquisition Cards, Telecommunications and Network Equipment DS90CF562MTD Texas Instruments Verwendet in: Industrial Control and Automation Links, Test and Measurement Instrumentation, Embedded Backplane Communication, Telecommunications and Network Equipment DS90C387VJD-TI Texas Instruments Verwendet in: Digital Video Processing Equipment, Embedded Backplane Communication, FPGA Data Acquisition Cards
What is the DS90CR282MTD?
The DS90CR282MTD is a Texas Instruments 28-bit Channel-Link receiver with four LVDS data streams and a 4.5 V to 5.5 V supply. According to the DS90CR282MTD datasheet listing, it receives differential LVDS data and presents the recovered information through a parallel CMOS/TTL interface in a 56-pin TSSOP package.
What is the operating voltage of DS90CR282MTD?
The DS90CR282MTD operates from 4.5 V to 5.5 V. The DS90CR282MTD specifications identify the receiver as a 5 V LVDS interface device, so the complete design should remain within this stated supply range during startup, normal operation, and transmission.
Where can I download the DS90CR282MTD datasheet PDF?
The DS90CR282MTD datasheet is available through the linked DS90CR282MTD PDF page on Alldatasheet and through the product resources listed on the Texas Instruments part page. Use the manufacturer datasheet pin-description table to confirm signal assignments, supply pins, ground pins, and differential input polarity before laying out the PCB.
Where can I find the DS90CR282MTD pinout?
The DS90CR282MTD pinout is defined in the manufacturer datasheet's pin-configuration tables. The device uses a 56-pin TSSOP package, but exact pin names, differential-pair polarity, supply connections, and ground assignments must be copied from those tables rather than inferred from the package drawing.
How many LVDS streams does DS90CR282MTD receive?
The DS90CR282MTD receives four LVDS data streams. Together they convey the serialized source data that the receiver reconstructs into a 28-bit parallel CMOS/TTL output, making the device appropriate for compatible Channel-Link transmitter architectures such as the DS90CR281 family.
Can DS90CR282MTD replace DS90CR281?
No. DS90CR281 is a transmitter, while DS90CR282MTD is a receiver, so they occupy opposite ends of a Channel-Link connection. Replacing one with the other would reverse the signal direction and change the board-level function; a transmitter and receiver must instead be selected as complementary parts.
Is DS90CR282MTD suitable for video data transfer?
Yes. DS90CR282MTD can be suitable for video-processing systems that already transmit serialized data with a compatible Channel-Link transmitter and require a 28-bit parallel receiver output. The actual video timing budget, data rate, cable length, connector, channel skew, and downstream FPGA or ASIC timing must be verified for the complete system.
What is the best drop-in replacement for DS90CR282MTD?
No independently verified drop-in replacement was identified for DS90CR282MTD with a documented 56-pin TSSOP footprint, equivalent pin assignment, and closely matched electrical ratings. Do not substitute a related Channel-Link device solely by matching the data width; confirm differential pair polarity, supply voltage, clock behavior, input capacitance, and package dimensions first.
What can replace DS90CR282MTD?
A valid replacement must be a 56-pin TSSOP Channel-Link receiver with pin-to-pin compatible connections, a 4.5 V to 5.5 V supply, equivalent four-stream LVDS behavior, and compatible parallel output timing. No candidate with all of these characteristics was confirmed, so use the Request a Quote form on this page when requesting sourcing or engineering review for an alternative.
How do I choose between DS90CR282MTD and a related Channel-Link receiver?
Choose DS90CR282MTD when the system uses four LVDS data streams, a 28-bit parallel output, a 4.5 V to 5.5 V supply, and a 56-pin TSSOP footprint. Select another receiver only after confirming that its protocol, data width, clock architecture, supply range, pin assignment, package, and timing behavior match the transmitter and downstream logic.
Is DS90CR282MTD in stock?
Current stock status must be checked through the Request a Quote form on this page because inventory changes continuously. The product listing identifies the part as available for ordering, but it does not establish a fixed quantity that can be guaranteed for a future production or prototype build.
What is the price of DS90CR282MTD?
Use the Request a Quote form on this page for the current DS90CR282MTD quotation, including the required quantity and tube packaging. The available product listings do not provide an explicit quantity-break table for this exact suffix, so no unit price is stated on this page.
What is the lead time for DS90CR282MTD?
Request the current lead time through the Request a Quote form on this page. Lead time can vary with order quantity, packaging, manufacturing conditions, and logistics requirements, so engineers should obtain a quantity-specific schedule before committing the component to a production milestone.
What are the key specifications of DS90CR282MTD that engineers should know?
The key confirmed specifications are a 28-bit parallel data width, four LVDS data streams, a 4.5 V to 5.5 V operating supply, CMOS/TTL parallel signaling, and a 56-pin TSSOP package supplied in a tube. Maximum data rate, receiver latency, input impedance, and temperature limits should be taken from the manufacturer datasheet for the exact device.
Does DS90CR282MTD require controlled-impedance PCB routing?
Yes. The DS90CR282MTD uses differential LVDS inputs, so the differential pairs should be routed with matched geometry, suitable layer-stack impedance, and minimized discontinuity between transmitter and receiver. Keep the four data lanes and clock channel mechanically and electrically consistent, and provide a continuous ground reference beneath the routed pairs.
Is DS90CR282MTD RoHS compliant and qualified for automotive use?
RoHS and automotive qualification status must be confirmed for the exact orderable MPN before use in a regulated design. The DS90CR282MTD product information confirms its 4.5 V to 5.5 V supply, 56-pin TSSOP package, and tube packaging, while the exact environmental and compliance declarations should be taken from the manufacturer labeling.

Technische Referenzdaten für DS90CR282MTD – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose DS90CR282MTD for a Channel-Link design that requires a 28-bit CMOS/TTL receiver output, four LVDS data streams, and a 4.5 V to 5.5 V supply in a 56-pin TSSOP package. It is a natural choice when the transmitter is a compatible 28-bit Channel-Link device, such as DS90CR281. Do not select it for a transmitter position, a negative-polarity LVDS interface, or a design requiring a different parallel-data width. No directly comparable drop-in receiver was confirmed, so related Channel-Link parts should be treated as redesign candidates until their pin assignments, differential polarity, electrical ratings, timing, and package dimensions are verified. For current availability, lead time, and a quantity-specific quotation, use the Request a Quote form on this page and include the required tube quantity and target schedule.

Vergleich mit Alternativen

Parameter Dieses Produkt
Brand Texas Instruments
Package 56-TSSOP
Device Type Receiver
Product Family 28-Bit Channel Link
Parallel Data Width 28 bits
LVDS Data Streams 4 streams
Supply Voltage Range 4.5 V to 5.5 V
Logic Interface CMOS/TTL
Packaging Tube

Wichtigste Unterscheidungsmerkmale

  • Dedicated 28-bit Channel-Link receiver function (vs. DS90CR281)
  • Conventional 5 V interface supply range (vs. DS90CF562MTD)
  • Established 56-pin TSSOP production format (vs. DS90CR285MTD)

Designhinweise

Route the four LVDS data pairs and the associated clock channel as controlled-impedance differential nets on a continuous reference plane. Keep pair spacing and trace geometry matched, avoid stubs, and maintain the same general routing environment across all channels. Consult the manufacturer datasheet for the exact differential pair assignments and polarity before assigning FPGA or ASIC pins.

Place the required input and bypass capacitors close to the DS90CR282MTD supply and ground pins, with short, low-inductance connections. The receiver operates from 4.5 V to 5.5 V, so verify rail tolerance and startup behavior across the complete system. Use the manufacturer recommended capacitance values and ESR characteristics when selecting decoupling components.

Account for cable or PCB-channel loss, connector transitions, source termination, receiver input capacitance, and lane-to-lane skew when establishing the supported link distance. Simulate or measure the complete source-to-receiver channel at the intended data rate. A short bench connection does not guarantee reliable performance over production cable lengths or through connectors.

Do not treat DS90CR281 and DS90CR282MTD as interchangeable devices: one transmits and the other receives. Also avoid choosing a replacement solely because it has 28 outputs or a 56-pin package. Confirm pin-to-pin mapping, differential polarity, supply range, protocol behavior, output timing, package dimensions, and assembly tolerances before approving a substitute.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The exact compliance declarations for DS90CR282MTD must be confirmed from the manufacturer labeling for the orderable MPN. No RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was confirmed by the product information.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

DS90CR282MTD datasheet DS90CR282MTD pinout DS90CR282MTD datasheet pdf DS90CR282MTD equivalent DS90CR282MTD replacement DS90CR282MTD cross reference DS90CR282MTD price DS90CR282MTD stock Texas Instruments DS90CR282MTD DS90CR282MTD 56-TSSOP receiver DS90CR282MTD 4.5V 5.5V DS90CR282MTD LVDS interface DS90CR282MTD vs DS90CR281 DS90CR282MTD footprint DS90CR282MTD application circuit

Verwandte Bauteile & Begriffe

Texas Instruments DS90CR282MTD DS90CR281 DS90CF562MTD DS90C387VJD-TI 28-Bit Channel Link LVDS Low Voltage Differential Signaling CMOS/TTL interface IC differential line receiver digital interface semiconductor 56-TSSOP TSSOP package family surface-mount package 4.5 V to 5.5 V LVDS data stream differential clock parallel data interface industrial automation video processing FPGA data acquisition test and measurement controlled-impedance routing digital signal integrity
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen