DSPIC33EP512MC204-I/ML - 16-bit 70 MIPS DSC 512KB Flash | Microchip
Teilenummer: DSPIC33EP512MC204-I/ML ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $6.42 | $6,42 |
| 10 | $5.78 | $57,80 |
| 100 | $5.16 | $516,00 |
| 500 | $4.68 | $2.340,00 |
| 1.000 | $4.25 | $4.250,00 |
DSPIC33EP512MC204-I/ML Übersicht
A digital signal controller combines the compute architecture of a microcontroller with the mathematical throughput of a DSP. In the product hierarchy, the dsPIC33EP sits within the broader class of 16-bit microcontrollers and digital signal controllers, occupying the space between general-purpose MCUs and dedicated DSPs. Its single-cycle MAC, DSP engine, and hardware multiply-accumulate make it the de facto choice for closed-loop control systems that need both decision logic and fast arithmetic in one chip.
Key features include the 70 MIPS dsPIC33E core, dual FLASH partitions supporting live updates, motor control PWM (MCPWM) peripherals with complementary outputs and dead-time insertion, quadrature encoder interface (QEI) inputs, and integrated analog: op-amps, comparators, and a high-speed 10/12-bit ADC. The peripheral mix is purpose-built for precision motor control - sensorless BLDC, PMSM FOC, and stepper drives - where PWM resolution and ADC sampling synchronization dominate system accuracy.
Technically, the dsPIC33EP core uses an enhanced Harvard architecture with a 24-bit instruction word, hardware DSP multiply-accumulate, and 40-bit wide accumulators. The MCPWM module provides up to 8 PWM outputs with edge- and center-aligned modes, while the QEI interfaces directly to optical encoders for velocity and position feedback. Multiple PGECx/PGEDx pin pairs support In-Circuit Serial Programming (ICSP) and debugging.
Typical applications include brushless DC and PMSM motor drives, digital power supplies (PFC, LLC), UPS systems, and industrial automation nodes requiring deterministic control loops at 20-70 kHz PWM frequencies.
Design consideration: all VDD/VSS pairs must be decoupled with 0.1uF ceramics placed close to the exposed-pad QFN, and the exposed pad must be soldered to a grounded copper pour for thermal and signal-integrity reasons; ICSP requires matched PGECx/PGEDx pairs.
This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with selection and sourcing information in one place.
Drop-in-Alternativen für DSPIC33EP512MC204-I/ML – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit DSPIC33EP512MC204-I/ML (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature, Core Architecture, Max CPU Speed, Maximum CPU Speed.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
DSPIC33EP512MC204-E/ML
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
DSPIC33EP512MC204-H/ML
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →DSPIC33EP256MC204T-I/MV
✅ Drop-In✓ Auf Lager
$3.34 / Stück
Datenblatt ansehen →DSPIC33EP32MC504-E/MV
✅ Drop-In✓ Auf Lager
$3.35 / Stück
Datenblatt ansehen →DSPIC33EP512MC204-I/ML Grenzwerte & elektrische Eigenschaften
| Core Architecture | 16-bit dsPIC33E DSC |
| Maximum CPU Speed | 70 MIPS |
| Program Memory (FLASH) | 512 KB (170K x 24) |
| RAM | 48 KB |
| Versorgungsspannung | 3.3 V |
| Gehäuse | 44-QFN (8x8 mm) with exposed pad (ML) |
| Pin-Anzahl | 44 |
| Betriebstemperatur | -40C to +85C (I grade) |
| Motor Control PWM (MCPWM) | Yes |
| Quadrature Encoder Interface (QEI) | Yes |
| Integrated Op-Amps | Yes |
| Comparators | Yes |
| Montageart | Surface Mount |
| Programming Interface | ICSP (multiple PGECx/PGEDx pairs) |
| Series | dsPIC 33EP |
| RoHS-Status | Compliant |
DSPIC33EP512MC204-I/ML 44-qfn (8x8 mm) with exposed pad (ml) Pinbelegungsleitfaden
Pinbelegung für DSPIC33EP512MC204-I/ML (44-qfn (8x8 mm) with exposed pad (ml)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für DSPIC33EP512MC204-I/ML.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
DSPIC33EP512MC204-I/ML ist geeignet für 6 Anwendungs: BLDC / PMSM Motor Control, Digital Power Supplies (PFC / LLC), Industrial Automation and PLC I/O, UPS and Inverter Systems, Sensor Signal Processing and Data Acquisition, Embedded Control and IoT Gateway Nodes.
BLDC / PMSM Motor Control
The DSPIC33EP512MC204-I/ML is purpose-built for sensorless and sensored brushless DC and PMSM drives. Its MCPWM module delivers complementary PWM pairs with hardware dead-time insertion at PWM frequencies of 16-20 kHz typical for FOC, while the 70 MIPS core executes field-oriented control current loops at 10 kHz+ with ample margin. The quadrature encoder interface reads position feedback directly, and the integrated op-amps condition shunt-resistor current signals before the ADC samples them synchronized to PWM centers, minimizing switching-noise corruption. The 512KB FLASH accommodates full FOC libraries plus parameter tables and a bootloader with room to spare. Unlike a general MCU plus external DSP, the single-chip solution cuts BOM cost and loop latency.
Empfohlen
Digital Power Supplies (PFC / LLC)
In digital power conversion - LLC resonant converters, PFC stages, and DC-DC modules - the DSPIC33EP512MC204-I/ML replaces analog control ICs with a firmware-defined control law. The high-speed ADC samples output voltage and inductor current each switching cycle, and the 70 MIPS core closes voltage and current loops for 100-500 kHz power stages. The MCPWM module's complementary outputs with adjustable dead-time drive half-bridge gates safely, and its special events trigger ADC sampling precisely at the optimal point in each cycle. The 512KB FLASH holds multiple converter profiles, protection state machines, and PMBus-style communication stacks, enabling one controller design across a product family with firmware-only variants.
Empfohlen
Industrial Automation and PLC I/O
For industrial automation nodes - PLC smart I/O, servo indexers, and motion subcontrollers - the DSPIC33EP512MC204-I/ML provides deterministic real-time control with DSP throughput. The QEI tracks incremental encoder motion in hardware, offloading the CPU for communication and logic tasks, while comparators implement hardware-based overcurrent trips with microsecond response independent of software. The 44-pin QFN packs enough GPIO and peripherals for combined control plus I/O handling in a compact 8x8 mm footprint. Industrial -40C to +85C rating matches factory-floor requirements, and 512KB FLASH supports protocol stacks (Modbus, CANopen-style layers) alongside the real-time control code within a single supply domain of 3.3V.
Empfohlen
UPS and Inverter Systems
Uninterruptible power supplies and low-power inverters benefit from the DSPIC33EP512MC204-I/ML's combination of fast control loops and rich protection peripherals. The MCPWM generates sinusoidal SPWM or space-vector modulation for the inverter bridge, the ADC samples AC output and battery current synchronized to the PWM carrier, and integrated comparators provide cycle-by-cycle hardware overcurrent shutdown. The 70 MIPS core simultaneously executes battery-charge management, transfer-switch logic, and communication. With 512KB FLASH, firmware can include event logging and configurable output profiles. The controller's deterministic interrupt latency is essential for the sub-100 microsecond response needed when transferring between mains and battery paths without output disturbance.
Empfohlen
Sensor Signal Processing and Data Acquisition
As a data-acquisition front-end, the DSPIC33EP512MC204-I/ML leverages its integrated analog to reduce external component count. The on-chip op-amps amplify small sensor signals (load cells, thermocouples via external conditioning, pressure bridges), comparators implement window thresholds, and the ADC digitizes multiple channels under DMA or firmware control. The DSP engine applies single-cycle MAC filtering - IIR/FIR noise reduction, RMS computation, and FFT-based spectral analysis - at 70 MIPS, far beyond typical MCU capability. The 48KB RAM buffers waveform captures for burst analysis. The 44-QFN's compact footprint suits dense multi-channel sensor cards, and 512KB FLASH stores calibration tables per channel with margin for field firmware updates.
Empfohlen
Embedded Control and IoT Gateway Nodes
For general embedded control that also needs signal-processing capability - smart actuators, environmental monitors, and edge gateway nodes - the DSPIC33EP512MC204-I/ML offers 16-bit compute density with 512KB FLASH for communication stacks (UART, SPI, I2C, CAN via external transceiver) plus application DSP tasks such as vibration analysis or acoustic event detection. The 3.3V supply aligns with standard sensor and radio modules, and the multiple PGECx/PGEDx pairs simplify field programming and diagnostics through ICSP. The QFN exposed pad provides solid thermal grounding for continuous-duty operation, and the industrial temperature grade covers unconditioned enclosures. One chip replaces an MCU plus a co-processor, reducing board area and BOM.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DSPIC33EP512MC204-I/ML – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DSPIC33EP512MC204-E/ML | DSPIC33EP512MC204-H/ML | DSPIC33EP256MC204T-I/MV | DSPIC33EP32MC504-E/MV |
|---|---|---|---|---|---|
| Package | 44-QFN (ML, 8x8 mm) | 44-QFN (ML, 8x8 mm) - same | 44-QFN (ML, 8x8 mm) - same | 44-QFN (MV) - same footprint family | 44-QFN (MV) - same footprint family |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FLASH Memory | 512 KB | 512 KB | 512 KB | 256 KB | 32 KB |
| CPU Speed | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Operating Temperature | -40C to +85C (I grade) | -40C to +125C (E grade) | Suffix-specific bin - verify datasheet | -40C to +85C (I grade) | -40C to +125C (E grade) |
| Motor Control Peripherals (MCPWM/QEI) | Yes (MCPWM, QEI) | Yes (MCPWM, QEI) | Yes (MCPWM, QEI) | Yes (MCPWM, QEI) | Yes (MCPWM, QEI) |
| Automotive Grade | No | No | No | No | No |
Wichtigste Unterscheidungsmerkmale
- 512KB FLASH for complex firmware (vs. DSPIC33EP256MC204T-I/MV)
- Extended temperature option in identical package (vs. DSPIC33EP512MC204-E/ML)
- Integrated analog reduces BOM (vs. DSPIC33EP32MC504-E/MV)
Designhinweise
The 44-QFN exposed pad is the primary ground and heat-removal path. Create a grounded copper pour under the part with an array of thermal vias (typically 4x4 grid) connecting to inner ground planes. Solder the exposed pad fully - a voided pad causes elevated junction temperatures and increased ground impedance that corrupts ADC readings during PWM switching. Per northernsoftware.com, all VDD and VSS pins must be connected, and each needs a 0.1uF ceramic decoupling capacitor placed within 2 mm of the pin.
The device provides multiple PGECx/PGEDx pairs for ICSP programming and debugging. A frequent field failure is wiring ICSPCLK and ICSPDAT to pins from different pairs - per northernsoftware.com you must use matched pairs (e.g., PGEC2 with PGED2). Also, when re-purposing PGD/PGC pins as GPIO, be aware they drive actively during programming; series resistors on motor-gate driver inputs prevent accidental MOSFET turn-on during reflashing in-circuit.
In motor-drive layouts, keep the current-shunt traces to the integrated op-amp inputs short and Kelvin-connected directly at the shunt resistor. Trigger ADC sampling from the MCPWM special-event trigger at PWM center or valley, where switching transients are minimal, rather than free-running the ADC. Route analog ground returns separately to the exposed pad and keep gate-driver switching loops small to limit ground bounce into the 3.3V domain.
Compliance-Informationen
RoHS compliant and lead-free per DigiKey/Mouser/Xecor listings. REACH, halogen-free, and conflict-minerals statuses not stated in provided data.
