DSPIC33FJ32MC101-I/SO - 16-bit DSC, 32KB Flash | Microchip
Teilenummer: DSPIC33FJ32MC101-I/SO ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $4.62 | $4,62 |
| 10 | $4.2 | $42,00 |
| 100 | $3.71 | $371,00 |
| 500 | $3.34 | $1.670,00 |
| 1.000 | $3.05 | $3.050,00 |
DSPIC33FJ32MC101-I/SO Übersicht
A digital signal controller combines the compute throughput of a DSP core with the peripheral set and ease of use of a microcontroller, sitting in the hierarchy between general-purpose MCUs and dedicated DSP ICs. The dsPIC33F family executes a modified Harvard, C compiler-friendly instruction set, making it a common choice for closed-loop power conversion and motion control where a plain MCU lacks MAC performance.
Key features of this member of the dsPIC33FJ32MC101 family include Motor Control PWM (MCPWM), a Charge Time Measurement Unit (CTMU), a Real-Time Clock and Calendar (RTCC), three comparators, and Peripheral Pin Select (PPS) that allows digital peripherals to be remapped to available pins - a major advantage on a low 20-pin footprint. The DSC also provides up to 16 mA I/O sink capability on selected pins and two external interrupt sources.
Architecturally, the device runs from an internal FRC oscillator or external crystal, executes single-cycle MAC and DSP multiply instructions, and supports In-Circuit Serial Programming (ICSP) with multiple PGECx/PGEDx pin pairs for debugging. Flash self-programming enables field firmware updates without an external programmer.
Typical applications include Brushless DC and PMSM motor control, digital power supplies such as LLC and PFC stages, electronic ballasts, and battery chargers - systems that need deterministic PWM generation plus fast ADC-triggered control loops.
Design consideration: the 20-pin budget is tight; plan pin assignments using PPS early, and respect the 3.0V-3.6V supply rail with adequate decoupling on all VDD/VSS pin pairs.
This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing context, verified drop-in alternatives, and practical design notes in one place.
Drop-in-Alternativen für DSPIC33FJ32MC101-I/SO – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit DSPIC33FJ32MC101-I/SO (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature, Core Architecture, Motor Control PWM, Peripheral Pin Select.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
DSPIC33FJ32MC101-E/SO
✅ Drop-In✓ Auf Lager
$3.75 / Stück
Datenblatt ansehen →DSPIC33FJ16MC101-I/SO
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$3.03 / Stück
Datenblatt ansehen →DSPIC33FJ32MC101-I/SO Grenzwerte & elektrische Eigenschaften
| Core Architecture | 16-bit dsPIC33F DSC |
| Max CPU Speed | 16 MIPS (32 MHz) |
| Flash Program Memory | 32 KB (11K x 24) |
| SRAM | 2 KB |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Betriebstemperatur | -40C to +85C (Industrial, I suffix) |
| Gehäuse | 20-pin SOIC, 1.27 mm pitch |
| Montageart | Surface Mount |
| Motor Control PWM | Yes (MCPWM) |
| Charge Time Measurement Unit | Yes (CTMU) |
| Real-Time Clock Calendar | Yes (RTCC) |
| Comparators | 3 |
| Peripheral Pin Select | Yes (PPS) |
| I/O Sink Current | Up to 16 mA (pin-specific) |
| Programming Interface | ICSP (PGECx/PGEDx pairs) |
| External Interrupts | 3 (two remappable) |
DSPIC33FJ32MC101-I/SO Pin-Konfiguration
| Pin 1 | MCLR — Master clear reset and ICSP programming voltage input |
| Pin 2 | AN0/CN2/RB0 — Analog input 0 / change notification / port B bit 0 |
| Pin 3 | AN1/CN3/RB1 — Analog input 1 / change notification / port B bit 1 |
| Pin 4 | AN2/CN4/RB2 — Analog input 2 / change notification / port B bit 2 |
| Pin 5 | AN3/CN5/RB3 — Analog input 3 / change notification / port B bit 3 |
| Pin 6 | VSS — Ground reference |
| Pin 7 | OSC1/CLKI/CN6/RA2 — Crystal input or external clock input |
| Pin 8 | OSC2/CLKO/RC15 — Crystal output or clock output |
| Pin 9 | VDD — Positive supply (3.0V to 3.6V) |
| Pin 10 | RP3/RF3/PGD/EMUD1 — Remappable peripheral pin / ICSP data (PGED) |
| Pin 11 | RP2/RF2/PGC/EMUC1 — Remappable peripheral pin / ICSP clock (PGEC) |
| Pin 12 | AN4/CN1/RB4 — Analog input 4 / change notification / port B bit 4 |
| Pin 13 | AN5/CN7/RB5 — Analog input 5 / comparator input / port B bit 5 |
| Pin 14 | AN9/RP5/RB13 — Analog input 9 / remappable pin / port B bit 13 |
| Pin 15 | AN10/RP4/RB14 — Analog input 10 / remappable pin / port B bit 14 |
| Pin 16 | AN11/RP3/RB15 — Analog input 11 / remappable pin / port B bit 15 |
| Pin 17 | TCK/RP0/RA0 — Test clock / remappable pin / port A bit 0 |
| Pin 18 | TDI/RP1/RA1 — Test data in / remappable pin / port A bit 1 |
| Pin 19 | TMS/RP2/RA3 — Test mode select / remappable pin / port A bit 3 |
| Pin 20 | TDO/RP3/RA4 — Test data out / remappable pin / port A bit 4 |
Typische Anwendungen
DSPIC33FJ32MC101-I/SO ist geeignet für 6 Anwendungs: BLDC / PMSM Motor Control, Digital Power Supplies (LLC / PFC), Battery Chargers, Electronic Ballasts and Lighting Control, Sensor Signal Conditioning and Capacitive Touch, Embedded Industrial Control Nodes.
BLDC / PMSM Motor Control
The DSPIC33FJ32MC101-I/SO is purpose-built for compact motor drives: its Motor Control PWM module generates complementary outputs with hardware dead-time, and the three analog comparators provide cycle-by-cycle overcurrent limiting without CPU latency. The 16 MIPS DSP core with single-cycle MAC instructions executes field-oriented or sensorless trapezoidal control loops well within typical 10-20 kHz PWM periods. On a 20-pin SOIC, Peripheral Pin Select lets the designer route PWM and feedback signals to optimal pins for small single-shunt or three-shunt inverter layouts, keeping total BOM cost low in fans, pumps, and power tools.
Empfohlen
Digital Power Supplies (LLC / PFC)
Switching power converters need deterministic PWM phase control and fast analog feedback, both natively handled by this DSC. The MCPWM module supports phase-shifted and complementary topologies required by LLC half-bridge and boost-PFC stages, while the internal comparators trigger current-limit events in hardware. The 16-bit DSP engine runs the compensator (PI or 3p3z) in fixed-point with single-cycle MAC throughput at 16 MIPS. Running from a 3.3V rail, the controller interfaces directly with gate-driver logic, and the CTMU can assist with precise time-interval measurement during fault diagnostics and startup sequencing.
Empfohlen
Battery Chargers
Multi-chemistry chargers (Li-ion CC/CV, lead-acid three-stage) benefit from this DSC's combination of PWM control, comparators for voltage/current thresholds, and RTCC for timed charge phases. The 32KB Flash accommodates charging state machines, temperature-compensation tables, and communication stacks simultaneously. The CTMU supports precise time measurement used in impedance-estimation charging algorithms, while PPS lets ADC-triggered control loops be remapped to fit a compact 20-pin board. Low-pin-count packages with 16 mA I/O drive capability can directly control status LEDs and small relays, reducing external component count in consumer charger designs.
Empfohlen
Electronic Ballasts and Lighting Control
Fluorescent and HID ballasts require high-frequency resonant PWM with lamp-fault protection - precisely the MCPWM-plus-comparator architecture of this device. The 16 MIPS core schedules ignition sequences, warm-up ramps, and frequency sweeps for resonance tracking, while hardware comparators shut down PWM within microseconds on lamp-removal or overcurrent faults, protecting the half-bridge. The RTCC enables scheduled dimming profiles in commercial lighting, and the CTMU supports touch-dimming interfaces without a separate touch IC. The 20-pin SOIC footprint suits the compact PCB area typical of integrated ballast/luminaire assemblies.
Empfohlen
Sensor Signal Conditioning and Capacitive Touch
The CTMU (Charge Time Measurement Unit) turns this DSC into a self-contained measurement system: it supports capacitive-touch keys, ultrasonic time-of-flight, and precise current-source-based measurements without external analog front-ends. The 16-bit DSP pipeline filters sensor data with MAC-accelerated FIR/IIR routines, and PPS lets comparator and timer functions be relocated as sensor layout demands. With 32KB Flash, calibration tables and nonlinearization curves fit alongside the application. This suits cost-sensitive appliances and industrial panels needing touch, level sensing, and basic control on a single 3.3V, 20-pin controller.
Empfohlen
Embedded Industrial Control Nodes
For compact industrial nodes - actuators, valves, small conveyors - this DSC offers a balanced mix of control peripherals and DSP headroom. Three remappable external interrupts, up to 16 mA I/O drive, and Peripheral Pin Select simplify board routing in dense 20-pin designs, while the RTCC supports time-stamped event logging and scheduled operation. The 32KB Flash leaves room for firmware-update bootloaders using Flash self-programming, and ICSP enables field reprogramming through a single connector. Operating from -40C to +85C, the industrial-temperature grade covers factory-floor and outdoor enclosure environments without derating.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DSPIC33FJ32MC101-I/SO – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DSPIC33FJ32MC101-E/SO | DSPIC33FJ16MC101-I/SO | DSPIC33FJ32MC101-I/P |
|---|---|---|---|---|
| Package | SOIC-20 (SO) | SOIC-20 - same | SOIC-20 - same | SPDIP-20 - different footprint |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS |
| Flash Memory | 32 KB | 32 KB | 16 KB | 32 KB |
| SRAM | 2 KB | 2 KB | 1 KB | 2 KB |
| Operating Temperature | -40C to +85C | -40C to +125C | -40C to +85C | -40C to +85C |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Peripherals (MCPWM/CTMU/RTCC/PPS) | Yes / Yes / Yes / Yes | Yes / Yes / Yes / Yes | Yes / Yes / Yes / Yes | Yes / Yes / Yes / Yes |
Wichtigste Unterscheidungsmerkmale
- Extended-temperature option with identical footprint (vs. DSPIC33FJ32MC101-E/SO)
- Double the memory of the smallest footprint-compatible sibling (vs. DSPIC33FJ16MC101-I/SO)
- Low-pin-count DSP performance (vs. DSPIC33FJ32GS608-50I/PT)
Designhinweise
The DSPIC33FJ32MC101-I/SO runs from a single 3.0V-3.6V rail. Decouple each VDD/VSS pin pair with 0.1uF ceramic capacitors placed within 3-5 mm of the package, plus one bulk 4.7-10uF capacitor near the IC. Because MCPWM switching edges inject noise into the analog domain, consider a ferrite bead between the digital rail and the AVDD/VREF input network. Keep the maximum 3.6V absolute rating in mind when sharing a rail with LED strings or charge pumps.
Plan Peripheral Pin Select assignments before routing. On a 20-pin SOIC, PPS flexibility only helps if analog-capable pins (ANx) are reserved for ADC/comparator signals while remappable RPx pins carry PWM outputs and digital feedback. Keep PGEC/PGED programming pairs routed to a 5-pin ICSP header with MCLR - a board that cannot be reprogrammed in-circuit forces socket-based production. Match PGECx with its own PGEDx pair; mixing pairs from different pairs is invalid per Microchip's ICSP guidelines.
Two frequent mistakes with this device: (1) using RB port pins as 5V-tolerant outputs - the dsPIC33FJ is a 3.3V family; interface to 5V logic through level shifters or series resistors only on pins the datasheet identifies as 5V tolerant. (2) Oversizing firmware beyond 32KB Flash - fixed-point control plus bootloader plus communications commonly exceeds this; if compile size approaches 28KB, move to a larger-Flash footprint-compatible family member or external storage rather than stripping safety code.
Compliance-Informationen
Compliance details were not present in the provided verified web data. Modern Microchip dsPIC33F production parts are generally RoHS-compliant, but this must be confirmed on the official Microchip product page or certificate of conformance before claims are made.
