Silicon Labs

EFM32TG210F16-D-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs

Teilenummer: EFM32TG210F16-D-QFN32 ✓ Aktiv
1.85 V to 3.8 V Vdss 0.6 uA Id 32-QFN (6 x 6 mm) Package 32 MHz Speed 16 KB Memory
MOQ: 1 |

EFM32TG210F16-D-QFN32 Übersicht

The Silicon Labs EFM32TG210F16-D-QFN32 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating at up to 32 MHz, with 16 KB of Flash memory, 4 KB of RAM, and a 32-QFN 6 x 6 mm package. It combines a 32-bit RISC core with autonomous peripherals and low-power operating modes for energy-sensitive embedded systems.

A microcontroller is a complete programmable control device integrating a processor core, Flash program memory, RAM, clocking, interrupt control, and peripherals such as timers, communications interfaces, and analog blocks. Within the product hierarchy, the EFM32TG210 belongs to the Tiny Gecko family of 32-bit microcontrollers and uses the ARM Cortex-M3 processor architecture.

Key specifications include a maximum clock frequency of 32 MHz, 16 KB of program Flash, 4 KB of SRAM, and 24 digital I/O pins. The processor can reach 1.25 Dhrystone MIPS per MHz, while an integrated Memory Protection Unit supports as many as eight memory segments. A Wake-up Interrupt Controller handles interrupts generated while the CPU is asleep.

The EFM32TG210 combines relatively high processing performance with low-power behavior suitable for battery-operated equipment. Published power characteristics include consumption as low as 0.6 uA in Stop mode and approximately 150 uA/MHz in Run mode. Autonomous peripheral operation allows timers and other functions to continue handling defined events while the processor remains in a low-energy state, reducing the need for continuous software polling.

Typical applications include connected sensor nodes, compact industrial controllers, battery-powered meters, low-power communications equipment, wearable accessories, and embedded subsystems that need a 32-bit core in a small surface-mount footprint. The 1.85 V to 3.8 V operating supply range also suits designs built around low-voltage 3 V power rails.

When laying out the board, treat the exposed pad as a thermal and electrical connection point and follow the manufacturer land-pattern and thermal-via guidance. Confirm the device pin names against the manufacturer pinout table, and place the external decoupling capacitors close to their associated supply pins to limit impedance in fast-switching current paths.

This page combines manufacturer-family specifications, same-footprint device comparisons, and practical implementation guidance to help engineers evaluate the EFM32TG210F16-D-QFN32 for compact, low-power embedded control designs.

Drop-in-Alternativen für EFM32TG210F16-D-QFN32 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit EFM32TG210F16-D-QFN32 (gleiche Bauform und Footprint) – abweichend in Package, Flash Memory, Digital I/O Pins, Product Type, RAM.

Silicon Labs
Package: 32-QFN (6x6 mm) with exposed pad
Vergleichen mit EFM32TG210F16-D-QFN32 →
Silicon Labs
Package: 32-QFN, 6 x 6 mm
Flash Memory: 32 kB
Digital I/O Pins: 24 pins
Vergleichen mit EFM32TG210F16-D-QFN32 →
Silicon Labs
Package: 32-QFN, 6x6 mm
Flash Memory: 8 kB
RAM: 2 kB
Vergleichen mit EFM32TG210F16-D-QFN32 →

EFM32TG210F32-QFN32

✅ Drop-In
Silicon Labs
📦 32-QFN (6 x 6 mm)
ARM Cortex-M3 32-bit microcontroller · ARM Cortex-M3 · 32 MHz · 32 kB · 4 kB · 24 pins · 2 x 16-bit timers · 1.85 V to 3.8 V

Preis auf Anfrage

Datenblatt ansehen →

EFM32TG210F8-QFN32

✅ Drop-In
Silicon Labs
📦 32-QFN (6 x 6 mm)
32-bit ARM Cortex-M3 microcontroller · ARM Cortex-M3 · 32 MHz · 8 kB · 2 kB · 24 · 2 x 16-bit timers · 1.85 V to 3.8 V

Preis auf Anfrage

Datenblatt ansehen →

EFM32G210F128-QFN32

✅ Drop-In
Silicon Labs
📦 32-QFN (6 x 6 mm)
32-bit ARM Cortex-M3 microcontroller · 32 MHz · ARM Cortex-M3 · 32-bit RISC · 128 kB · 128K x 8 · 16 kB · 24 pins

Preis auf Anfrage

Datenblatt ansehen →

EFM32G200F32-QFN32

✅ Drop-In
Silicon Labs
📦 32-QFN (6 x 6 mm)
ARM Cortex-M3 · 32-Bit · 32 MHz · 32 kB (32K x 8) · 8 kB · 1.98 V to 3.8 V · 24 · 2 x 16-bit

Preis auf Anfrage

Datenblatt ansehen →

EFM32ZG210F16-QFN32

✅ Drop-In
📦 32-QFN (6 x 6 mm)
Core changes from Cortex-M3 at 32 MHz to Cortex-M0+ at 24 MHz, a 25% frequency reduction; Flash and RAM remain 16 KB and 4 KB

📋 Referenzalternative (nicht im Katalog)

EFM32TG210F16-D-QFN32 Grenzwerte & elektrische Eigenschaften

Product Type 32-bit ARM Cortex-M3 microcontroller
Series EFM32 Tiny Gecko
Maximum CPU Frequency 32 MHz
Core Architecture ARM Cortex-M3, 32-bit RISC
Flash Memory 16 KB
RAM 4 KB
Digital I/O Pins 24
Timers 2 x 16-bit
Supply Voltage Range 1.85 V to 3.8 V
Stop Mode Current 0.6 uA
Run Mode Current 150 uA/MHz
Processor Performance Up to 1.25 Dhrystone MIPS/MHz
Memory Protection Unit Segments Up to 8
Gehäuse 32-QFN (6 x 6 mm)
Montageart Surface mount
Program Memory Organization 16K x 8

EFM32TG210F16-D-QFN32 32-qfn (6 x 6 mm) Pinbelegungsleitfaden

Pinbelegung für EFM32TG210F16-D-QFN32 (32-qfn (6 x 6 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für EFM32TG210F16-D-QFN32 im 32-qfn (6 x 6 mm)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für EFM32TG210F16-D-QFN32.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

EFM32TG210F16-D-QFN32 ist geeignet für 6 Anwendungs: Battery-Powered IoT Sensor Node, Industrial Control and Monitoring Module, Low-Power Communications Terminal, Smart Metering and Utility Endpoint, Portable Medical or Wellness Device, Embedded Accessory and Wearable Controller.

🧩

Battery-Powered IoT Sensor Node

The EFM32TG210F16-D-QFN32 fits compact sensor nodes that periodically report measurements and spend most of their operating time asleep. According to the manufacturer EFM32TG210 datasheet, the device consumes as little as 0.6 uA in Stop mode, while the Cortex-M3 core reaches 32 MHz when processing is required. Its 16 KB of Flash accommodates a compact acquisition, filtering, and communications firmware, and 4 KB of RAM supports typical protocol buffers. The Wake-up Interrupt Controller allows captured events to trigger processing even when the processor is sleeping.

🏭

Industrial Control and Monitoring Module

The EFM32TG210F16-D-QFN32 is suitable for compact industrial modules that supervise digital equipment, read sensors, and maintain deterministic timing functions. Its two 16-bit timers support periodic sampling, input capture, and output compare tasks, while 24 digital I/O pins provide practical connectivity in a 6 x 6 mm package. The 1.85 V to 3.8 V operating range fits 3 V equipment architectures. Confirm the exact peripheral allocation and exposed-pad layout against the manufacturer pinout before committing the PCB footprint.

🌐

Low-Power Communications Terminal

The EFM32TG210F16-D-QFN32 can serve as the control MCU in a low-power communications terminal requiring fast peripheral handling and low standby demand. At up to 32 MHz, the Cortex-M3 core provides sufficient throughput for protocol stacks, while autonomous timers and the Wake-up Interrupt Controller reduce unnecessary main-loop activity. The 16 KB Flash limitation makes code size a primary design constraint, so use the F32 family member when libraries, dual protocol stacks, or OTA buffers no longer fit. Verify serial-interface pin multiplexing on the chosen board revision.

⚡

Smart Metering and Utility Endpoint

The EFM32TG210F16-D-QFN32 is a practical controller for low-cost metering endpoints that accumulate measurements and transmit compact data packets. Its 24 digital I/O pins can support pulse-output sensors, status indicators, and interface isolation components, while the low-power sleep behavior helps manage the energy budget of battery or energy-harvesting installations. The Cortex-M3 Memory Protection Unit supports up to eight protected memory segments, allowing firmware tasks to be separated. Confirm pulse-counter and wake-up timing requirements in the manufacturer application guidance.

💊

Portable Medical or Wellness Device

The EFM32TG210F16-D-QFN32 can control a compact wellness wearable or portable health-accessory device that combines sensor acquisition with low-energy operation. The 24 digital I/O pins support buttons, LEDs, and sensor-control signals, while the 32 MHz Cortex-M3 core handles signal conditioning and local filtering. Its Stop-mode figure of 0.6 uA supports duty-cycled operation between measurement events. For connected medical equipment, validate regulatory requirements, isolation strategy, and the complete analog signal chain independently of the MCU selection.

📱

Embedded Accessory and Wearable Controller

The EFM32TG210F16-D-QFN32 fits embedded accessory controllers where board area and standby energy are constrained. The 32-QFN 6 x 6 mm package leaves room for sensors and radio circuitry, and 24 digital I/O pins provide flexible control of LEDs, buttons, and host interfaces. The Cortex-M3 core offers a familiar 32-bit architecture while the 16 KB Flash option keeps the firmware footprint modest. For products using a companion radio or higher-bandwidth interface, validate interrupt latency, pin sharing, and firmware footprint before layout release.

What is the EFM32TG210F16-D-QFN32?
The EFM32TG210F16-D-QFN32 is a Silicon Labs Tiny Gecko microcontroller built around a 32-bit ARM Cortex-M3 processor. According to the manufacturer EFM32TG210 datasheet, the device operates at up to 32 MHz and provides 16 KB of Flash, 4 KB of RAM, 24 digital I/O pins, and two 16-bit timers in a 32-QFN 6 x 6 mm package. It is intended for low-power embedded control, sensing, communications, and battery-operated equipment.
How much Flash and RAM does the EFM32TG210F16-D-QFN32 have?
The EFM32TG210F16-D-QFN32 includes 16 KB of Flash program memory organized as 16K x 8 and 4 KB of SRAM. According to the manufacturer EFM32TG210 datasheet, the F16 designation identifies the 16 KB Flash configuration. This combination suits compact applications that need a 32-bit Cortex-M3 core but do not require the larger memory resources of the F32 version of the Tiny Gecko family.
What is the maximum operating frequency of the EFM32TG210F16-D-QFN32?
The EFM32TG210F16-D-QFN32 operates at up to 32 MHz. According to the manufacturer EFM32TG210 datasheet, its ARM Cortex-M3 core can achieve as much as 1.25 Dhrystone MIPS per MHz, providing up to 40 MIPS under the stated performance metric. The clock configuration, flash wait-state settings, and peripheral timing must be programmed consistently with the selected operating frequency.
What is the supply voltage range of the EFM32TG210F16-D-QFN32?
The EFM32TG210F16-D-QFN32 supports a 1.85 V to 3.8 V operating supply range. This range makes the device suitable for systems built around low-voltage 3 V rails. According to the manufacturer device information, designers should confirm the power architecture, decoupling requirements, and peripheral-specific operating limits before finalizing the regulator and analog-supply choices.
Where can I download the EFM32TG210F16-D-QFN32 datasheet PDF?
The EFM32TG210F16-D-QFN32 datasheet PDF is available through the manufacturer document hosted by Keil and through the Silicon Labs product documentation. According to the manufacturer EFM32TG210 datasheet, the document covers the F32, F16, and F8 configurations. Use the pin-description table, electrical characteristics, and package drawings in that document when assigning PCB nets and verifying the exposed-pad connection.
Where can I find the EFM32TG210F16-D-QFN32 pinout?
The EFM32TG210F16-D-QFN32 pinout is documented in the manufacturer EFM32TG210 datasheet package drawings and pin-description tables. The device uses a 32-QFN 6 x 6 mm package with 24 digital I/O pins and an exposed thermal pad. Use the datasheet pin table rather than a generic QFN drawing because the exposed pad and several ground and supply assignments are package-specific.
Is the EFM32TG210F16-D-QFN32 suitable for battery-powered devices?
The EFM32TG210F16-D-QFN32 is suitable for many battery-powered applications because its Tiny Gecko platform emphasizes low-energy operation. According to the manufacturer EFM32TG210 datasheet, the device can consume as little as 0.6 uA in Stop mode and approximately 150 uA/MHz in Run mode. Its autonomous peripherals can also perform defined events while the Cortex-M3 core sleeps.
What is the best drop-in replacement for the EFM32TG210F16-D-QFN32?
The EFM32TG210F32-QFN32 is the closest same-family alternative when additional Flash memory is acceptable. It retains the 32 MHz Cortex-M3 core, 4 KB of RAM, 24 digital I/O pins, and the 32-QFN 6 x 6 mm package, while increasing Flash from 16 KB to 32 KB. Confirm peripheral mappings and board-level requirements in the manufacturer documentation before using it as a production substitute.
What can replace the EFM32TG210F16-D-QFN32?
The EFM32TG210F32-QFN32 can replace the EFM32TG210F16-D-QFN32 when a larger 32 KB Flash device is acceptable and the same 32-QFN footprint remains suitable. The F16 part has 16 KB of Flash, while the F32 alternative has 32 KB and retains the 32 MHz Cortex-M3 core and 4 KB of RAM. Validate the exposed-pad layout and application-specific peripheral requirements before substitution.
Is the EFM32TG210F16-D-QFN32 the same as the EFM32TG210F32-QFN32?
No, the EFM32TG210F16-D-QFN32 and EFM32TG210F32-QFN32 differ in Flash capacity. According to the manufacturer EFM32TG210 datasheet, the F16 device has 16 KB of Flash and the F32 device has 32 KB, while both use the same 32 MHz Cortex-M3 platform and 32-QFN package family. The F32 part is the practical upgrade when the original application no longer fits in 16 KB.
EFM32TG210F16-D-QFN32 vs EFM32TG210F8-QFN32: which should be selected?
Choose the EFM32TG210F16-D-QFN32 when 16 KB of Flash is required; choose the EFM32TG210F8-QFN32 only when an 8 KB Flash, 2 KB RAM configuration is sufficient. According to manufacturer device information, both belong to the 32 MHz Cortex-M3 Tiny Gecko platform and expose 24 digital I/O pins, but their memory capacities differ by a factor of two. Software image size and runtime RAM requirements are the decisive criteria.
When should I choose the EFM32TG210F16-D-QFN32 over a larger-memory variant?
Choose the EFM32TG210F16-D-QFN32 when the firmware fits within 16 KB of Flash, 4 KB of RAM is adequate, and a compact 32-QFN implementation is preferred. According to the manufacturer EFM32TG210 datasheet, it retains the same 32 MHz Cortex-M3 performance class as the larger-memory family member while reducing Flash capacity. This is often appropriate for simple sensor, control, and low-power monitoring nodes.
Is the EFM32TG210F16-D-QFN32 suitable for an IoT sensor node?
The EFM32TG210F16-D-QFN32 is suitable for a compact IoT sensor node that requires low standby consumption and a modest firmware footprint. According to the manufacturer EFM32TG210 datasheet, Stop-mode current can reach 0.6 uA, and the device includes a Wake-up Interrupt Controller for events occurring while the CPU sleeps. Its 24 digital I/O pins also support sensors, indicators, and low-speed digital interfaces.
How do the EFM32TG210F16-D-QFN32 and EFM32ZG210F16-QFN32 compare?
The EFM32TG210F16-D-QFN32 uses a 32 MHz ARM Cortex-M3 core, while the EFM32ZG210F16-QFN32 uses a Cortex-M0+ core rated up to 24 MHz. According to manufacturer device information, both provide 16 KB of Flash, 4 KB of RAM, and 24 digital I/O pins in the Tiny Gecko-class package family. Do not substitute them without checking pin multiplexing, peripheral availability, and firmware-driver compatibility.
Where can I buy the EFM32TG210F16-D-QFN32?
The EFM32TG210F16-D-QFN32 can be requested through the Request a Quote form on this page. The form is the appropriate route for current commercial terms, stock confirmation, minimum order quantity, lead time, and shipment requirements. Avoid placing a production order until the quote confirms the exact ordering code, package variant, and delivery schedule.
What is the lead time for the EFM32TG210F16-D-QFN32?
Request the current EFM32TG210F16-D-QFN32 lead time and minimum order quantity through the Request a Quote form on this page. Lead time can vary with the exact package and shipment option, so it should be confirmed against the current manufacturer and distribution status at the time of quotation. Include your required delivery date in the request to obtain an actionable schedule.
What are the key specifications engineers should know about the EFM32TG210F16-D-QFN32?
The EFM32TG210F16-D-QFN32 combines a 32 MHz ARM Cortex-M3 core with 16 KB of Flash, 4 KB of RAM, 24 digital I/O pins, two 16-bit timers, and a 1.85 V to 3.8 V supply range. According to the manufacturer EFM32TG210 datasheet, it also includes an eight-segment Memory Protection Unit and low-power modes with consumption as low as 0.6 uA in Stop mode. The device is packaged in a 32-QFN 6 x 6 mm outline.

Technische Referenzdaten für EFM32TG210F16-D-QFN32 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Select the EFM32TG210F16-D-QFN32 when a design needs a 32 MHz ARM Cortex-M3 core, 16 KB of Flash, 4 KB of RAM, and 24 digital I/O pins in a compact 32-QFN package. Choose the EFM32TG210F32-QFN32 when the firmware exceeds 16 KB but the rest of the memory and peripheral architecture remain appropriate. Choose the EFM32TG210F8-QFN32 only for a substantially smaller firmware and when reducing RAM from 4 KB to 2 KB is acceptable. Consider the EFM32ZG210F16-QFN32 when 24 MHz Cortex-M0+ performance is sufficient and software is compatible with the simpler core. For designs requiring much larger code or RAM capacity, the EFM32G210F128-QFN32 or EFM32G200F32-QFN32 may fit better, but their peripheral assignments must be checked. In every case, verify pin multiplexing, package dimensions, exposed-pad treatment, voltage requirements, and software-driver support.

Vergleich mit Alternativen

Parameter Dieses Produkt EFM32TG210F32-QFN32 EFM32TG210F8-QFN32 EFM32G210F128-QFN32 EFM32G200F32-QFN32 EFM32ZG210F16-QFN32
Package 32-QFN (6 x 6 mm) 32-QFN (6 x 6 mm) 32-QFN (6 x 6 mm) 32-QFN (6 x 6 mm) 32-QFN (6 x 6 mm) 32-QFN (6 x 6 mm)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M0+
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 24 MHz
Flash Memory 16 KB 32 KB 8 KB 128 KB 32 KB 16 KB
RAM 4 KB 4 KB 2 KB 8 KB 8 KB 4 KB
Digital I/O Pins 24 24 24 24 24 24

Wichtigste Unterscheidungsmerkmale

  • Balanced 32-bit performance and compact 16 KB Flash configuration (vs. EFM32TG210F32-QFN32)
  • Higher processing frequency than the Cortex-M0+ alternative (vs. EFM32ZG210F16-QFN32)
  • More memory than the reduced-memory Tiny Gecko option (vs. EFM32TG210F8-QFN32)
  • Substantially smaller Flash footprint than the G210F128 option (vs. EFM32G210F128-QFN32)

Designhinweise

Use the manufacturer QFN land pattern and thermal-via arrangement for the 32-QFN 6 x 6 mm package. Keep the exposed-pad connection unobstructed because it is part of the package's thermal and electrical construction. Place input and bulk decoupling capacitors near their designated supply pins, and route high-current or fast-switching signals away from the exposed pad to prevent voltage drops and added thermal stress.

Design the supply for the 1.85 V to 3.8 V operating range while allowing for startup, load transients, and the voltage drop across the power-path components. Low-power sleep performance is only realized when leakage and wake-up paths are controlled. Confirm that the regulator can start the MCU into the required operating state and that the brownout and reset design follows the manufacturer guidance.

Do not choose a same-package alternative solely from the Flash and RAM figures. The EFM32ZG210F16-QFN32 uses Cortex-M0+ at up to 24 MHz instead of Cortex-M3 at up to 32 MHz, while EFM32G-series devices may have different peripheral sets. Check pin multiplexing, interrupt vectors, timer functions, analog peripherals, driver support, and the exposed-pad layout before treating any listed alternative as a production substitute.

Assign all peripheral pins from the manufacturer pin-description table rather than inferring functions from a generic 32-QFN drawing. The EFM32TG210 provides 24 digital I/O pins, and several package pins are devoted to supplies, grounds, and the exposed pad. Assign communication lines to pins that support the required peripheral, keep sensitive analog routes short, and isolate clocks and high-speed signals from precision measurement inputs.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer product listing and datasheet excerpts do not state the requested compliance attributes. Confirm current RoHS, REACH, halogen-free, and conflict-minerals declarations for the exact ordering code before production release.

Ähnliche Suchanfragen

EFM32TG210F16-D-QFN32 EFM32TG210F16-D-QFN32 datasheet EFM32TG210F16-D-QFN32 pinout EFM32TG210F16-D-QFN32 datasheet pdf EFM32TG210F16-D-QFN32 price EFM32TG210F16-D-QFN32 stock EFM32TG210F16-D-QFN32 equivalent EFM32TG210F16-D-QFN32 replacement EFM32TG210F16-D-QFN32 vs EFM32TG210F32-QFN32 Silicon Labs EFM32TG210F16-D-QFN32 EFM32TG210F16-D-QFN32 footprint EFM32TG210F16-D-QFN32 low power mode 32 MHz Cortex-M3 16KB Flash QFN32 EFM32TG210F16-D-QFN32 IoT sensor

Verwandte Bauteile & Begriffe

Silicon Labs EFM32TG210F16-D-QFN32 EFM32TG210F32-QFN32 EFM32TG210F8-QFN32 EFM32G210F128-QFN32 EFM32G200F32-QFN32 EFM32ZG210F16-QFN32 EFM32 Tiny Gecko ARM Cortex-M3 ARM Cortex-M0+ 32-bit RISC processor microcontroller embedded system 16 KB Flash 4 KB SRAM 32-QFN QFN surface-mount package low-power mode Stop mode Wake-up Interrupt Controller Memory Protection Unit IoT sensor node industrial controller battery-powered device
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen