EFM32TG225F8-BGA48T - 32MHz Cortex-M3 MCU | Silicon Labs
Teilenummer: EFM32TG225F8-BGA48T ✗ AbgekündigtEFM32TG225F8-BGA48T Übersicht
A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. Within the embedded-control hierarchy, the EFM32TG225F8-BGA48T is a 32-bit microcontroller based on the ARM Cortex-M3 RISC architecture. It belongs to the Tiny Gecko family and combines general-purpose embedded processing with energy-saving operating modes, making it suitable for battery-operated and portable products.
The principal features include a 32 MHz Cortex-M3 core, 8 KB of Flash program memory, 2 KB of SRAM, AES hardware acceleration, and three integrated operational amplifiers. Silicon Labs specifies run-mode consumption as 150 uA/MHz and stop-mode consumption as low as 0.6 uA. These characteristics allow the MCU to balance responsive processing against low standby demand when an application spends substantial time sleeping between measurements or control actions.
The Tiny Gecko architecture also emphasizes autonomous peripherals and broad analog integration. Peripheral activity can reduce the need for continuous central-processor intervention, while the operational amplifiers can handle low-level signal conditioning close to the sensing or drive circuit. This integration helps reduce board size, external component count, and the energy required to move analog signals through a larger external signal chain.
Typical uses include battery-powered sensing nodes, compact industrial monitors, low-power wireless-control endpoints, automated test equipment, and embedded instrumentation. The device is particularly appropriate when a design needs a 32-bit control core, short energy-saving-mode transitions, local analog amplification, and hardware-assisted AES without allocating a large external memory subsystem.
PCB design should account for the 48-BGA footprint, exposed-pad thermal requirements, and the small 4 x 4 mm body. Keep high-speed traces short, provide a continuous ground reference, route sensitive analog inputs away from switching nodes, and follow the manufacturer pin-description and land-pattern tables when assigning BGA balls and power planes.
This product page combines the EFM32TG225F8-BGA48T electrical characteristics, package information, low-power use cases, drop-in family alternatives, and practical implementation guidance. The result supports faster MCU selection, more accurate PCB planning, and clearer decisions between flash-memory configurations and related Tiny Gecko devices.
Drop-in-Alternativen für EFM32TG225F8-BGA48T – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
EFM32TG225F16-BGA48T
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
EFM32TG225F32-BGA48T
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
EFM32TG225F16-BGA48
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →EFM32TG225F32-BGA48
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
EFM32TG825F32-BGA48T
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
EFM32TG225F8-BGA48T Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | Tiny Gecko |
| Maximum CPU Frequency | 32 MHz |
| Processor Architecture | 32-bit ARM Cortex-M3 RISC |
| Flash Memory | 8 KB (8K x 8) |
| RAM | 2 KB |
| Supply Voltage Range | 1.85 V to 3.8 V |
| Gehäuse | 48-BGA (4 x 4 mm) |
| Montageart | Surface Mount |
| Cryptographic Accelerator | AES |
| Integrated Operational Amplifiers | 3 |
| Stop-Mode Current | 0.6 uA |
| Run-Mode Current | 150 uA/MHz |
| Core | Single-core |
EFM32TG225F8-BGA48T 48-bga (4 x 4 mm) Pinbelegungsleitfaden
Pinbelegung für EFM32TG225F8-BGA48T (48-bga (4 x 4 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EFM32TG225F8-BGA48T.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EFM32TG225F8-BGA48T ist geeignet für 6 Anwendungs: Battery-Powered Sensor Nodes, Compact Industrial Monitoring, Low-Power Wireless Control Endpoints, Portable Medical Sensor Interface, Automated Test and Measurement, Energy-Efficient IoT Controller.
Battery-Powered Sensor Nodes
The EFM32TG225F8-BGA48T fits compact battery-powered sensor nodes that periodically wake to measure, evaluate, and transmit information. Its 32 MHz ARM Cortex-M3 core provides responsive control, while the specified 0.6 uA stop current and 150 uA/MHz run consumption help reduce energy use between events. The 8 KB Flash budget is suitable for compact firmware, and the 2 KB RAM can support small working buffers. Three integrated operational amplifiers can condition nearby sensor signals without requiring separate amplifiers. Power-budget calculations should also include the sensor, radio, and regulator because the MCU alone does not determine total battery life.
Empfohlen
Compact Industrial Monitoring
The EFM32TG225F8-BGA48T can serve as the local controller in a compact industrial monitoring module that samples sensors and records thresholds or operating status. Its 32-bit Cortex-M3 architecture handles control logic efficiently, and the integrated three operational amplifiers can support low-level signal conditioning close to the sensing nodes. The 1.85 V to 3.8 V operating range accommodates low-voltage industrial rails, while the 48-BGA package limits board footprint. Designers should keep analog traces away from switching nodes, provide local bypass capacitance at supply pins, and confirm the production temperature grade against the installation environment.
Empfohlen
Low-Power Wireless Control Endpoints
The EFM32TG225F8-BGA48T is suitable for wireless-control endpoints that wake periodically to read inputs, update an actuator, and return to a low-power state. Its short energy-saving-mode behavior supports responsive event-driven operation, while the Cortex-M3 core can manage protocol framing and local control tasks. The hardware AES accelerator can support secure link operations without imposing the full software overhead of a general-purpose cryptographic implementation. Because radio current usually dominates the system budget, validate the complete duty cycle and supply regulator rather than estimating battery life from MCU current alone.
Empfohlen
Portable Medical Sensor Interface
The EFM32TG225F8-BGA48T can control a compact medical-sensor interface when its memory, voltage, and qualification requirements match the intended use. The 32-bit processor supports digital filtering and control, and the three integrated operational amplifiers can help condition low-level analog inputs. Its 1.85 V to 3.8 V supply range supports low-voltage portable designs, while AES hardware accelerates secure-data operations. A medical design must verify the exact operating-temperature grade, regulatory requirements, isolation strategy, and patient-safety architecture; the MCU designation alone does not establish medical-device compliance.
Empfohlen
Automated Test and Measurement
The EFM32TG225F8-BGA48T can act as the supervisory controller in a compact automated test fixture where a Cortex-M3 core coordinates stimulus, measurement, sequencing, and status reporting. Its three integrated operational amplifiers may support buffer or gain stages around low-level analog circuitry, reducing external component count. The 8 KB Flash capacity suits small control applications, but firmware-intensive logging or update mechanisms may require a larger-Flash family member. Place sensitive analog paths away from digital switching activity, use a continuous ground plane under the BGA, and verify the exposed-pad thermal design before applying sustained workloads.
Empfohlen
Energy-Efficient IoT Controller
The EFM32TG225F8-BGA48T fits IoT controllers that combine local sensing, low-power logic, and simple actuator outputs. The Tiny Gecko device provides run-mode consumption of 150 uA/MHz and stop-mode consumption as low as 0.6 uA, helping minimize energy when the product is idle. Its AES accelerator and 32-bit processor allow secure control tasks to share a compact platform, while three operational amplifiers can support local analog conditioning. The 48-BGA body reduces board area but requires careful escape routing, thermal-pad management, and assembly-process planning for high-volume production.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EFM32TG225F8-BGA48T – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EFM32TG225F16-BGA48T | EFM32TG225F32-BGA48T | EFM32TG225F16-BGA48 | EFM32TG225F32-BGA48 | EFM32TG825F32-BGA48T |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) | 48-BGA (4 x 4 mm) |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 8 KB | 16 KB | 32 KB | 16 KB | 32 KB | 32 KB |
Wichtigste Unterscheidungsmerkmale
- Lowest Flash configuration in the listed Tiny Gecko alternatives (vs. EFM32TG225F16-BGA48T)
- Compact package with three integrated operational amplifiers (vs. EFM32TG825F32-BGA48T)
- Low-power Cortex-M3 processing with hardware AES (vs. ATXMEGA32A4-CUR)
Designhinweise
Design the 48-BGA escape routing from the manufacturer land pattern and pin-description table. Provide uninterrupted ground-plane coverage beneath the device, route supply connections with low loop area, and place the required bypass capacitors close to their associated power balls. The 4 x 4 mm body offers limited routing escape space, so stackup, via placement, and assembly clearance should be reviewed before the first PCB revision.
Follow the manufacturer's exposed-pad connection and thermal-via guidance for the selected package variant. Keep the thermal-via field under the central pad electrically tied to the required plane, and avoid thermal relief patterns that impair heat transfer. Validate the assembled board with the expected processor activity, ambient temperature, and enclosure because the package is compact and can couple heat from nearby components into the MCU region.
Separate analog and digital signal paths carefully because the three integrated operational amplifiers may be used for sensor signals. Route sensitive inputs away from switching nodes, radio supplies, clock signals, and high-current outputs. Use a continuous reference plane beneath the BGA, avoid splitting return paths beneath the device, and connect analog ground references at the point specified by the device and system architecture.
Do not select a larger-Flash family member solely from its package drawing and assume every peripheral function is identical. Check the relevant datasheet tables for memory configuration, boot behavior, peripheral availability, ordering suffixes, and exposed-pad construction. Likewise, verify that 8 KB Flash and 2 KB RAM meet the application's code, stack, logging, and update requirements before standardizing the device.
Compliance-Informationen
Compliance status and the operating-temperature grade require confirmation from the manufacturer or the current product documentation.