ESD24VS2 - 26V ESD Protection TVS Diode | Infineon
Teilenummer: ESD24VS2 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0.0252 | $0,03 |
| 10 | $0.0252 | $0,25 |
| 100 | $0.0252 | $2,52 |
| 500 | $0.0252 | $12,60 |
| 1.000 | $0.0252 | $25,20 |
ESD24VS2 Übersicht
A TVS diode, also called a transient-voltage-suppression diode, is a discrete semiconductor protection device. It belongs to the diode and surge-protection hierarchy, sits between a protected circuit node and ground or a supply rail, and diverts transient current when the voltage rises beyond its protection threshold. The device acts as a high-impedance path during normal operation and becomes conductive during a short ESD pulse. This category complements other circuit-protection methods such as filters, fuses, and overvoltage clamps.
Verified listings describe the ESD24VS2 family for ESD and EMI protection, automotive applications, and 30 kV ESD withstand in the ESD24VS2U E6327 ordering variant. The supplied data does not establish the complete electrical rating set for the exact base MPN, so details such as reverse working voltage, breakdown voltage, forward voltage, capacitance, leakage current, and pulse power are retained as data-needed values rather than inferred from related variants.
The PG-SOT23 package supports compact surface-mount layouts and is commonly used on signal lines, control interfaces, communication ports, and low-voltage equipment. Placement near a connector or board entry point helps limit transient energy before it reaches sensitive circuitry. The exact package pin mapping is not published in the supplied verification excerpt, so the package pinout is marked unavailable rather than guessed.
Use ESD24VS2 when the board requires a dedicated discrete ESD clamp and the verified protection rating meets the system’s interface threat level. Designers should confirm the exact ordering variant, polarity, working voltage, clamp voltage, and system grounding strategy against the manufacturer datasheet before production release. This page consolidates the supplied distributor references, datasheet link, and circuit-protection guidance without inventing missing ratings.
The most important design tradeoff is between placing the clamp close to the connector and controlling capacitance or leakage on sensitive signal paths. For power or high-current transients, the TVS diode may require a separate fuse or upstream surge-protection stage; the supplied data does not establish suitability for those conditions. This device should be selected for ESD and EMI transients rather than assumed to replace a power surge suppressor.
This product page combines verified Infineon and distributor references, practical placement guidance, application context, and strict data-gap markers. It is intended as an engineering starting point for ESD protection selection, with final approval dependent on the exact variant datasheet and system-level transient validation.
Drop-in-Alternativen für ESD24VS2 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
ESD24VS2U E6327
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ESD24VS2UE6327HTSA1
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ESD24VS2B
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ESD24VS2 Grenzwerte & elektrische Eigenschaften
| Device Type | Silicon TVS diode / ESD protection diode |
| Product Family | ESD24VS2 series |
| Manufacturer | Infineon Technologies |
| ESD Protection Rating | 30 kV for ESD24VS2U E6327 ordering variant |
| Related Ordering Code | ESD24VS2U E6327 |
| Automotive Ordering Code | ESD24VS2UE6327HTSA1 |
| Related Ordering Code Clamp Voltage | 41 V at 5 A (8/20 microsecond pulse) |
| Gehäuse | PG-SOT23 |
| Montageart | Surface mount |
| Application Category | ESD and EMI protection |
| Automotive Application | Automotive ESD/EMI protection |
ESD24VS2 pg-sot23 Pinbelegungsleitfaden
Pinbelegung für ESD24VS2 (pg-sot23-Gehäuse). Dieses Leistungsbauteil verfügt über Gate-, Drain- und Source-Anschlüsse. Bei nicht gepolten Gehäusen entnehmen Sie die genaue Ausrichtung von Pin 1 und Footprint-Details dem Herstellerdatenblatt. Typische Anwendungen sind Netzteilentwurf, Motoransteuerung und Lastschaltung.
Keine detaillierten Pinbelegungsdaten verfügbar für ESD24VS2.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
ESD24VS2 ist geeignet für 6 Anwendungs: Automotive Connector ESD Protection, USB and Communications Port Protection, Industrial Control Interface Protection, Sensor and Measurement Signal Inputs, Low-Voltage Embedded Systems, EMI-Sensitive External Cable Entry.
Automotive Connector ESD Protection
The ESD24VS2 family is explicitly described by verified Mouser data as automotive ESD/EMI protection, making it a candidate for connector-facing automotive electronics. Place the PG-SOT23 device close to the external connector so an ESD event is diverted before reaching a controller or communication interface. The verified ESD24VS2U E6327 variant is listed at 30 kV ESD withstand, while the exact base-MPN rating, polarity, and temperature limits must be confirmed before production. Validate the return path and verify that the protected signal remains within the downstream device limits.
Empfohlen
USB and Communications Port Protection
Use the ESD24VS2 as a discrete transient clamp on a communication line entering a compact PCB, provided the exact device ratings are verified for the line voltage and signal bandwidth. The PG-SOT23 package supports surface-mount placement near the connector, reducing the distance over which an ESD pulse can propagate into the protected circuitry. The verified data confirms ESD/EMI protection use but does not provide the capacitance, working voltage, or leakage needed to qualify a high-speed line. Check those parameters and confirm pin orientation before layout release.
Empfohlen
Industrial Control Interface Protection
The ESD24VS2 family can be evaluated for industrial control, sensor, and equipment interfaces where human-contact or cable-borne ESD events are expected. Place the TVS diode close to the connector entry and use the shortest practical path to the chosen ground or protection reference. The verified listings support ESD/EMI protection and surface mounting, but they do not provide the exact reverse voltage, leakage, capacitance, or industrial temperature range for the base MPN. These parameters must be checked against the control-system signal and grounding requirements.
Empfohlen
Sensor and Measurement Signal Inputs
A low-level sensor or measurement interface can benefit from a dedicated ESD clamp when the external cable is exposed to electrostatic discharge. The ESD24VS2 is intended for discrete ESD and EMI protection, and its PG-SOT23 package enables placement near the input connector or connector-adjacent protection area. However, the supplied data does not state input capacitance, leakage, or working voltage for the exact base MPN. Confirm that the clamp does not unacceptably load a precision sensor signal and compare its capacitance with the source impedance and required bandwidth.
Empfohlen
Low-Voltage Embedded Systems
ESD24VS2 can be evaluated as an external transient clamp on low-voltage embedded-system interfaces where the exact protection voltage is compatible with the circuit. The PG-SOT23 surface-mount package is suitable for automated assembly and compact boards, while the verified family data supports automotive ESD/EMI protection. The supplied data does not establish the base MPN’s reverse working voltage, leakage current, or capacitance, so it should not be selected solely from the family name. Verify the complete ordering code and test the clamp in the final ground-reference configuration.
Empfohlen
EMI-Sensitive External Cable Entry
The verified product references identify ESD/EMI protection as the application category for the ESD24VS2 family, making it relevant to cable-entry points where external electromagnetic transients may couple into a board. Place the device near the connector and keep the transient return path short and controlled. Because the supplied information does not provide antenna-coupling data, capacitance, or system-level surge margins, this application requires board-level validation rather than reliance on the family description alone. Confirm the exact clamp behavior and ensure downstream devices remain below their absolute maximum ratings.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für ESD24VS2 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | ESD24VS2U E6327 | ESD24VS2UE6327HTSA1 | ESD24VS2B |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Device Type | Silicon TVS diode / ESD protection diode | Silicon TVS diode / ESD protection diode | TVS diode | ESD24VS2 family variant; exact type rating unavailable |
Wichtigste Unterscheidungsmerkmale
- Verified automotive-oriented family variant (vs. ESD24VS2U E6327)
- Documented clamp condition for a related ordering code (vs. ESD24VS2UE6327HTSA1)
- Surface-mount PG-SOT23 integration (vs. ESD24VS2B)
Designhinweise
Place the TVS diode at the connector-side entry point and keep the path from the exposed connector to the clamp as short as practical. The protected signal should reach the clamp before sensitive circuitry, while the transient return should follow a controlled ground or reference path. Confirm the PG-SOT23 land pattern and pin orientation against the exact Infineon datasheet; the supplied excerpt does not provide a pin map.
Do not assign the related ESD24VS2U E6327 rating of 30 kV or the ESD24VS2UE6327HTSA1 clamp value of 41 V at 5 A to the base MPN without checking the ordering code. Family naming can conceal different voltage, polarity, qualification, or temperature variants. Validate reverse working voltage, clamp voltage, leakage, capacitance, and pulse conditions against the protected line before schematic release.
For communication or sensor lines, compare the TVS capacitance and leakage with the source impedance, edge rate, and receiver bandwidth. A clamp that meets an ESD voltage rating can still degrade a high-speed signal if its capacitance is too high or if its leakage changes the bias network. The supplied data does not state the exact capacitance or leakage, so these values remain mandatory design checks.
Compliance-Informationen
The supplied data identifies automotive ESD/EMI protection for ESD24VS2U E6327 but does not provide verified RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements for ESD24VS2.
