FGE573QAAMD - Wi-Fi 7 Triple-Band BLE 5.3 Module | Quectel
Teilenummer: FGE573QAAMD ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $32.5 | $32,50 |
| 10 | $29.85 | $298,50 |
| 100 | $26.4 | $2.640,00 |
| 500 | $23.75 | $11.875,00 |
| 1.000 | $21.2 | $21.200,00 |
FGE573QAAMD Übersicht
A Wi-Fi 7 module is a self-contained radio subsystem that integrates the RF transceiver, baseband processor, and protocol stack on a single PCB, allowing host processors to add IEEE 802.11be connectivity without RF design expertise. As part of the broader Wi-Fi module taxonomy (Wi-Fi module -> wireless SoC module -> RF transceiver module -> electronic module), the FGE573QAAMD belongs to the high-throughput multi-band segment that serves cloud gaming, AR/VR, 8K streaming, industrial IoT, and telemedicine.
Key differentiating specifications include triple-band simultaneous operation across 2.4/5/6 GHz, 802.11be (Wi-Fi 7) compliance with 320 MHz channel support, BLE 5.3 with LE Long Range, and MLO for sub-millisecond handover latency. The module ships without an on-board RF filter (per the 'w/o filter' suffix in the MPN), letting designers integrate a customer-selected filter chain for regulatory or band-edge optimization. Surface-mount packaging simplifies high-volume SMT lines, while the antenna-not-included design enables antenna placement flexibility.
The FGE573QAAMD uses a Qualcomm-based Wi-Fi 7 silicon platform with separate 2x2 MIMO radios for 2.4/5/7 GHz and a third 1x1 radio for 6 GHz, achieving 2.9 Gbps aggregate throughput under ideal conditions. Multi-link operation lets a single client transmit simultaneously on multiple bands, reducing latency variance for time-sensitive applications. The host interface is typically PCIe or SDIO for Wi-Fi and UART/PCM for Bluetooth, allowing the module to pair with a wide range of application processors.
Typical applications include AR/VR headsets, cloud-gaming handhelds, 8K video streaming dongles, industrial IoT gateways, telemedicine endpoints, and Wi-Fi 7 access points. Its MLO support particularly benefits variable-latency workloads such as cloud rendering and industrial robotics. The wide-band triple-radio architecture suits gateways, mesh routers, and edge-AI appliances requiring simultaneous high-throughput backhaul and low-power BLE provisioning.
When designing with this module, ensure the host processor supplies stable 3.3 V to the module's VBAT rail and that the antenna trace is a 50 ohm controlled-impedance line with a pi-network footprint reserved for the missing filter. Thermal management is generally passive because the module's average dissipation is below 1.5 W, but a copper keep-out region is recommended under the antenna. Always validate the regulatory domain (FCC, CE, MIC) for the specific 6 GHz band subset in your deployment region.
This page synthesizes distributor pricing, drop-in alternatives, application pairings, and practical design notes not found in the manufacturer datasheet alone.
Drop-in-Alternativen für FGE573QAAMD – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit FGE573QAAMD (gleiche Bauform und Footprint) – abweichend in Frequency Bands, Mounting Type, RoHS Status.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
FGE573QAAMF
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
FGE573QAAMD-R
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
FGE576QAAMD
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$11.4 / Stück
Datenblatt ansehen →FGM573QAAMD
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
FGE573QAAMD Spezifikationen (herstellerveröffentlicht)
| Manufacturer | Quectel |
| Series | FGE573Q |
| Protocol | 802.11 a/b/g/n/ac/ax/be (Wi-Fi 7), Bluetooth v5.3 |
| Frequency Bands | 2.4 GHz, 5 GHz, 6 GHz |
| Maximum Data Rate (Wi-Fi) | 2.9 Gbps |
| Bluetooth Standard | BLE 5.3, BLE Long Range |
| Multi-Link Operation (MLO) | Supported |
| Antenna | Not included (external antenna required) |
| Montageart | Surface Mount |
| Module Form Factor | LGA SMD module |
| RF Filter | Not included on module (per 'w/o filter' suffix) |
| Package / Packaging | Tape & Reel (TR) |
| RoHS-Status | Compliant (per Quectel product page) |
FGE573QAAMD Schnittstellen & Anschlüsse
FGE573QAAMD bietet die folgenden, vom Hersteller veröffentlichten Schnittstellen und Anschlüsse: Funk, Bluetooth. Pinbelegung der Erweiterungsheader, Nummerierung der Anschlüsse und elektrische Grenzwerte sind in der Herstellerdokumentation definiert.
| Funk | 2.9 Gbps |
| Bluetooth | BLE 5.3, BLE Long Range |
Siehe die Herstellerdokumentation für die vollständige Pinbelegung der Erweiterungsleiste und die Nummerierung der Steckverbinder-Pins.
Typische Anwendungen
FGE573QAAMD ist geeignet für 6 Anwendungs: Cloud Gaming Handhelds, AR/VR Headsets, 8K Video Streaming Dongles, Industrial IoT Gateways, Telemedicine Endpoints, Wi-Fi 7 Access Points and Mesh Routers.
Cloud Gaming Handhelds
The FGE573QAAMD fits cloud gaming handhelds by delivering up to 2.9 Gbps aggregate Wi-Fi 7 throughput across 2.4/5/6 GHz bands with multi-link operation (MLO) for sub-millisecond latency handover. Placed between the application processor and the handheld's antenna chain, the module's BLE 5.3 path also serves low-power game controller pairing. Compared with a Wi-Fi 6E module, the FGE573QAAMD reduces input-lag variance by enabling simultaneous 5 GHz + 6 GHz links, critical for 120 fps cloud rendering. The 320 MHz channel support under 802.11be ensures headroom for 4K HDR game streams. Designers should reserve a 50 ohm controlled-impedance antenna trace and provide a 3.3 V LDO rated for 1 A peak.
Empfohlen
AR/VR Headsets
The FGE573QAAMD is suited for AR/VR headsets where MLO and 6 GHz operation reduce motion-to-photon latency by aggregating two bands simultaneously. Its BLE 5.3 Long Range radio supports tether-free controller links up to 200 m line-of-sight, removing the need for a separate Bluetooth companion IC. The triple-band 2x2 MIMO configuration maintains high throughput during head movements that would otherwise trigger rate-adaptation on a single-band link. For inside-out six-degrees-of-freedom (6DoF) tracking over Wi-Fi, the module's <1 ms handover is critical to prevent visible judder. Designers should mount the module at the headset's top edge to minimize body blockage of the 6 GHz signal.
Empfohlen
8K Video Streaming Dongles
For 8K HDR streaming dongles, the FGE573QAAMD's 2.9 Gbps PHY rate provides ample headroom for HEVC/H.266 8K streams at 60 fps, exceeding the bitrate of Wi-Fi 6E modules by ~2x. The module's tri-band capability lets the dongle auto-select 6 GHz for clean-band operation when available, falling back to 5 GHz or 2.4 GHz for legacy routers. BLE 5.3 is used for remote-control pairing and CEC-over-BLE bridging to the host TV. Designers should provision for HDCP-secured link encryption by integrating the module's host-side crypto engine. Thermal dissipation in a sealed dongle enclosure typically remains passive because average RF duty is below 30 percent.
Empfohlen
Industrial IoT Gateways
The FGE573QAAMD enables industrial IoT gateways to aggregate Wi-Fi 7 sensor mesh backhaul alongside legacy 2.4 GHz Zigbee/Thread-over-BLE bridges. Its industrial-grade -40C to +85C operating range (per the Quectel FGE573Q datasheet) supports factory floor deployments. Multi-link operation provides redundant uplink paths to edge-AI servers, reducing downtime from single-band interference common in metal-rich industrial environments. BLE 5.3 Long Range supports provisioning over 100 m line-of-sight, eliminating truck-rolls for device commissioning. For hazardous-location certifications (UL Class I Div 2), the module's surface-mount LGA form factor simplifies enclosure integration.
Empfohlen
Telemedicine Endpoints
For telemedicine endpoints, the FGE573QAAMD provides the bandwidth and latency required for real-time 4K diagnostic video while supporting BLE 5.3 pairing with wireless medical peripherals such as stethoscopes, otoscopes, and pulse oximeters. The module's MLO capability ensures continuous uplink during patient mobility, critical for in-home remote consultation carts. Wi-Fi 7's 320 MHz channels enable simultaneous streaming of multiple high-resolution imaging modalities (ultrasound + endoscopy) to a remote specialist. Designers should pair the module with hardware root-of-trust for HIPAA-compliant data encryption on the wireless link. The external-filter configuration of the 'QAAMD' suffix lets OEMs customize band-edge filtering for hospital RF environments.
Empfohlen
Wi-Fi 7 Access Points and Mesh Routers
The FGE573QAAMD is a strong fit for tri-band Wi-Fi 7 mesh routers, where its 2x2 MIMO across 2.4/5 GHz plus 1x1 MIMO on 6 GHz matches the typical 8-stream service profile for high-end consumer gateways. MLO enables backhaul aggregation across 5 GHz and 6 GHz simultaneously, doubling mesh link throughput versus Wi-Fi 6E. BLE 5.3 is used for easy-mesh onboarding via smartphone apps and for IoT device setup. The 'w/o filter' configuration of the FGE573QAAMD lets router OEMs select cost-optimized filters per region. Designers should provision dedicated RF shielding on the 6 GHz antenna path to minimize self-interference with the 5 GHz radio in a compact router enclosure.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für FGE573QAAMD – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | FGE573QAAMF | FGE573QAAMD-R | FGE576QAAMD | FGM573QAAMD |
|---|---|---|---|---|---|
| Brand | Quectel | Quectel | Quectel | Quectel | Quectel |
| Package | LGA SMD module | LGA SMD module - same | LGA SMD module - same | LGA SMD module - same | LGA SMD module - same |
| Wi-Fi Standard | 802.11 a/b/g/n/ac/ax/be (Wi-Fi 7) | 802.11 a/b/g/n/ac/ax/be (Wi-Fi 7) | 802.11 a/b/g/n/ac/ax/be (Wi-Fi 7) | 802.11 a/b/g/n/ac/ax/be (Wi-Fi 7) | 802.11 a/b/g/n/ac/ax/be (Wi-Fi 7) |
| Frequency Bands | 2.4 / 5 / 6 GHz | 2.4 / 5 / 6 GHz | 2.4 / 5 / 6 GHz | 2.4 / 5 / 6 GHz | 2.4 / 5 / 6 GHz |
| Bluetooth | BLE 5.3 + LE Long Range | BLE 5.3 + LE Long Range | BLE 5.3 + LE Long Range | BLE 5.3 + LE Long Range | BLE 5.3 + LE Long Range |
| Multi-Link Operation (MLO) | Yes | Yes | Yes | Yes | Yes |
| RF Filter | External (w/o filter) | Integrated on module (AAMF suffix) | External (w/o filter) | External (w/o filter) | External (w/o filter) |
| Regional Firmware | Default (broad) | Default (broad) | Regional subset (-R suffix) | Default (broad) | Default (broad) |
Wichtigste Unterscheidungsmerkmale
- Triple-band Wi-Fi 7 with 320 MHz channels and 2.9 Gbps aggregate PHY rate (vs. FGE576QAAMD)
- Multi-link operation (MLO) for sub-millisecond handover latency (vs. FGM573QAAMD)
- 'w/o filter' suffix for OEM-controlled RF front-end tuning (vs. FGE573QAAMF)
Designhinweise
Estimated: Provide a 3.3 V LDO rated for at least 1 A peak transient load to the FGE573QAAMD's VBAT rail. Wi-Fi 7 transmit bursts on 320 MHz channels at MCS 13 draw short peaks above 800 mA; a switching converter with insufficient bulk capacitance will cause Vcore droop and link resets. Add 22 uF + 100 nF decoupling within 5 mm of the module's VBAT pin. The 'w/o filter' suffix means RF chain power is dominated by the module's PA, not the filter, so power supply rejection above 100 kHz matters for EVM compliance.
Reserve a 50 ohm controlled-impedance microstrip or coplanar waveguide (CPWG) trace from the FGE573QAAMD's antenna pad to the external antenna or antenna switch. The trace length should be minimized (typically <8 mm) and routed over a continuous ground plane with no signal traces crossing beneath. Add a pi-network footprint (CLC) on the antenna path to accommodate band-specific matching or filter insertion, since this variant ships without an on-module filter. Maintain at least 3 mm keep-out under the antenna pad to avoid detuning.
Do not assume 6 GHz operation is permitted in your deployment region - 6 GHz bands are restricted by FCC (5.925-7.125 GHz), EN 303 645 / EN 301 893 (5945-6425 MHz in EU), and MIC in Japan. Choose the regional firmware variant (e.g. FGE573QAAMD-R) to match the target band's regulatory mask. Avoid running simultaneous 5 GHz + 6 GHz in adjacent channels without sufficient filter isolation; self-interference can degrade throughput by 30 percent. Also, do not omit the host processor's PCIe reference clock; the FGE573QAAMD typically uses PCIe for Wi-Fi data.
Estimated: Average dissipation of the FGE573QAAMD is below 1.5 W under continuous Wi-Fi 7 2x2 MIMO load, so passive cooling is typically sufficient. However, in sealed enclosures (e.g., compact dongles or AR glasses), measure junction temperature with a thermocouple under worst-case RF duty (MCS 13, 320 MHz) to confirm the case stays below 60 C. Add thermal vias under the module's exposed pad to spread heat into the host PCB's inner copper layers; avoid routing high-speed signals through the same via field.
Compliance-Informationen
RoHS and REACH compliant per Quectel product page. Not AEC-Q100 qualified (consumer/industrial grade, not automotive). Lead-free reflow profile per JEDEC J-STD-020 is supported. Halogen-free status not explicitly listed - confirm with Quectel datasheet before specifying.
