Maxim Integrated

ICL7652CPD+ - 450kHz Zero-Drift Op Amp | Maxim Integrated

Teilenummer: ICL7652CPD+ ✗ Abgekündigt
700 uV Vdss 15 pA Id 14-PDIP, 0.300 inch (7.62 mm) row spacing Package
MOQ: 1 |

ICL7652CPD+ Übersicht

The Maxim Integrated ICL7652CPD+ is a single-circuit zero-drift operational amplifier with a 450 kHz gain-bandwidth product, 0.5 V/us slew rate, 15 pA input bias current, and 700 uV input offset voltage. It is packaged in a 14-pin PDIP package measuring 0.300 inches, or 7.62 mm, across the row of leads. The device is listed as obsolete, so lifecycle planning and replacement qualification are essential before starting a new design.

A zero-drift operational amplifier is an amplifier that uses continuous-time chopping and internal nulling techniques to suppress low-frequency input-offset drift. This category belongs to the broader precision-amplifier and signal-conditioning hierarchy. Chopper-stabilized amplifiers are especially useful when a circuit must amplify small differential signals without converting slow temperature changes, resistor drift, or amplifier drift into a significant output error.

The ICL7652CPD+ provides a 450 kHz gain-bandwidth product and 0.5 V/us slew rate. These figures place it among amplifier types suitable for low-frequency precision signal chains with moderate bandwidth requirements. Its 15 pA input bias current minimizes disturbance from high-impedance sources, while the listed 700 uV input offset defines the baseline static error that must be considered in precision gain stages.

The ICL7652CPD+ uses a chopper-stabilized architecture to reduce offset drift and 1/f noise. A chopper amplifier periodically reverses the input polarity and demodulates the result, allowing very small internal offsets to be cancelled. Practical implementations still require attention to input filtering, output-noise bandwidth, clock-related artifacts, and the stability of the surrounding feedback network.

Typical uses include low-level sensor conditioning, strain-gauge and bridge-amplifier front ends, precision current measurement, low-frequency active filters, laboratory instrumentation, and data-acquisition channels. The 15 pA bias current is particularly useful when the source impedance is high, while the 450 kHz bandwidth provides enough loop gain for several common precision-amplifier topologies.

Because the ICL7652CPD+ is obsolete, engineers should assess whether an existing design can remain on this part, whether an order-on-request supply route is acceptable, and whether a qualified drop-in alternative can be validated. For new precision designs, compare offset voltage, bias current, bandwidth, slew rate, supply range, package pinout, noise behavior, and lifecycle status rather than relying only on the zero-drift label.

This page combines the listed electrical characteristics, package information, lifecycle status, drop-in candidates, and application-specific design guidance. It also identifies unspecified parameters explicitly so engineers can check the manufacturer datasheet before release and avoid basing production decisions on incomplete assumptions.

Drop-in-Alternativen für ICL7652CPD+ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

ICL7652CPD

✅ Drop-In
📦 14-PDIP (0.300 inch, 7.62 mm)
Same 450 kHz gain-bandwidth product, 0.5 V/us slew rate, and 14-PDIP package; ordering suffix and lifecycle terms require confirmation

📋 Referenzalternative (nicht im Katalog)

ICL7652CPD-2

✅ Drop-In
📦 14-PDIP (0.300 inch, 7.62 mm)
Same-family 14-PDIP zero-drift amplifier with 450 kHz gain-bandwidth product and 0.5 V/us slew rate; temperature-grade suffix differs

📋 Referenzalternative (nicht im Katalog)

ICL7652CTV

✅ Drop-In
📦 14-PDIP (0.300 inch, 7.62 mm)
Same ICL7652 zero-drift family and 14-PDIP package with approximately 450 kHz gain-bandwidth product; ordering-grade temperature range differs

📋 Referenzalternative (nicht im Katalog)

ICL7652CPD+ Grenzwerte & elektrische Eigenschaften

Amplifier Type Zero-Drift Operational Amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 450 kHz
Slew Rate 0.5 V/us
Input Bias Current 15 pA
Input Offset Voltage 700 uV
Gehäuse 14-PDIP, 0.300 inch (7.62 mm) row spacing
Anzahl der Pins 14 pins
Montageart Through-hole
Product Status Obsolete

ICL7652CPD+ 14-pdip, 0.300 inch (7.62 mm) row spacing Pinbelegungsleitfaden

Pinbelegung für ICL7652CPD+ (14-pdip, 0.300 inch (7.62 mm) row spacing-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für ICL7652CPD+ im 14-pdip, 0.300 inch (7.62 mm) row spacing-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ICL7652CPD+.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ICL7652CPD+ ist geeignet für 6 Anwendungs: Precision Bridge Sensor Front Ends, Low-Level Current Measurement, High-Impedance Sensor Signal Conditioning, Data Acquisition Signal Chains, Precision Instrumentation Amplifiers, Medical and Laboratory Measurement.

🏭

Precision Bridge Sensor Front Ends

The ICL7652CPD+ fits low-level bridge and strain-gauge front ends where signal amplitude is small and low-frequency drift directly affects measurement accuracy. Its zero-drift architecture reduces amplifier-generated offset movement, while the listed 15 pA input bias current limits loading on high-impedance bridge outputs. The 450 kHz gain-bandwidth product supports modest-bandwidth instrumentation, and the 0.5 V/us slew rate can handle sensor transients without overdriving the amplifier. Designers should still verify the input common-mode range, offset-null behavior, and filter requirements for the particular bridge excitation and gain.

⚡

Low-Level Current Measurement

The ICL7652CPD+ is well suited to precision current measurement when the shunt voltage is small and the useful signal bandwidth remains below the amplifier's 450 kHz gain-bandwidth capability. The 15 pA input bias current is favorable for high-impedance sensing networks, while the zero-drift architecture reduces slow offset changes. Its 700 uV listed input offset still contributes to absolute error and should be included in the measurement budget. The 0.5 V/us slew rate provides adequate response for many slowly varying industrial currents, but system designers should include input filtering and verify that the shunt and amplifier do not introduce excessive thermal drift.

🧩

High-Impedance Sensor Signal Conditioning

The ICL7652CPD+ can condition signals from high-impedance sensors because its 15 pA input bias current limits DC loading and its zero-drift operation improves long-term low-frequency stability. With a 450 kHz gain-bandwidth product, it is appropriate for sensors whose information bandwidth is modest rather than high. A practical front end should use guarded or short PCB traces, add input filtering appropriate to the sensor, and keep the selected closed-loop gain low enough to preserve adequate bandwidth and phase margin. The 700 uV input offset specification remains relevant when translating small sensor outputs into engineering units.

🖥️

Data Acquisition Signal Chains

The ICL7652CPD+ is applicable to low-level data-acquisition channels where reducing slow offset drift improves repeatability across temperature. Its 450 kHz gain-bandwidth product can support moderate-bandwidth amplification, and the 15 pA bias current reduces errors with high-source-impedance converters or sensors. Designers should limit loop gain according to the required channel bandwidth and verify the amplifier's stability with the chosen feedback network and sampling capacitance. The obsolete lifecycle status makes this configuration most appropriate for sustaining an existing installation or controlled legacy redesign rather than creating a new long-lived platform.

📡

Precision Instrumentation Amplifiers

The ICL7652CPD+ can serve as the input stage of a discrete instrumentation amplifier when its 15 pA bias current and low-drift architecture are important. A three-amplifier topology can combine common-mode rejection with a configurable differential gain, but each added amplifier contributes offset, noise, and bandwidth limitations. The ICL7652CPD+ contributes a 450 kHz gain-bandwidth product and 0.5 V/us slew rate, making it most appropriate for laboratory or industrial measurements with limited bandwidth. Resistor matching and input bias-current balance must be checked carefully to prevent degradation of common-mode rejection.

💊

Medical and Laboratory Measurement

The ICL7652CPD+ is suited to low-frequency medical or laboratory measurement circuits where leakage from the amplifier could disturb a high-impedance source. Its 15 pA input bias current is the key attraction, while the chopper-stabilized architecture helps reduce slow offset drift. The device must still meet the application's safety, isolation, qualification, and electromagnetic-compatibility requirements, which cannot be inferred from its amplifier specifications. Because the part is obsolete, medical and laboratory equipment programs should document the obsolescence risk, supply plan, and qualification of any replacement.

Zusammenfassung der empfohlenen Produkte

ICL7652CPD Same-family 14-PDIP zero-drift amplifier Verwendet in: Precision Bridge Sensor Front Ends, High-Impedance Sensor Signal Conditioning, Precision Instrumentation Amplifiers ICL7653 Related ICL family precision amplifier Verwendet in: Precision Bridge Sensor Front Ends, High-Impedance Sensor Signal Conditioning, Precision Instrumentation Amplifiers ICL7652CPD-2 Same-family temperature-graded alternative Verwendet in: Low-Level Current Measurement, Data Acquisition Signal Chains, Medical and Laboratory Measurement ICL7652CTV Same-family ordering alternative Verwendet in: Low-Level Current Measurement, Data Acquisition Signal Chains, Medical and Laboratory Measurement
What is the ICL7652CPD+ used for?
The ICL7652CPD+ is used for low-level precision signal conditioning because it combines a zero-drift architecture with 15 pA input bias current and a 450 kHz gain-bandwidth product. According to the Maxim Integrated datasheet, the device is a single operational amplifier suitable for instrumentation, sensor interfaces, and low-frequency active filtering. Its chopper-stabilized operation reduces offset drift, while the 700 uV input offset remains an important error term in high-gain designs.
What are the key specifications of ICL7652CPD+?
The ICL7652CPD+ is a one-circuit, zero-drift operational amplifier with a 450 kHz gain-bandwidth product, 0.5 V/us slew rate, 15 pA input bias current, and 700 uV input offset voltage. The Maxim Integrated datasheet identifies a 14-PDIP package with 7.62 mm lead-row spacing. It is also marked obsolete. These characteristics make it most relevant to low-frequency precision circuits requiring low bias current and reduced offset drift.
Is ICL7652CPD+ obsolete?
Yes, ICL7652CPD+ is listed as obsolete. The Maxim Integrated product information therefore should not be treated as a new-design recommendation. For an existing supported design, request current availability and lead time through the Request a Quote form on this page. For a new design, evaluate a currently supported amplifier and validate offset, bias current, bandwidth, slew rate, supply range, and PCB pin compatibility before substitution.
Where can I download the ICL7652CPD+ datasheet PDF?
The ICL7652CPD+ datasheet is available through the Maxim Integrated document link on this page, with a mirrored PDF index also listed in the technical sources. The manufacturer datasheet is the controlling document for pin assignments, supply limits, offset-drift curves, input common-mode range, output swing, and test conditions. Use the pin-description and electrical-characteristics tables when assigning PCB tracks or preparing a replacement qualification.
Where can I find the ICL7652CPD+ pinout?
The ICL7652CPD+ uses a 14-PDIP package, and its complete numbered pin assignment should be taken from the Maxim Integrated datasheet before PCB work begins. The product page does not reproduce a manufacturer-confirmed pin table, so use the datasheet pin-description diagram as the authoritative reference. In particular, verify offset-null, output, input, supply, and ground connections rather than inferring them from a generic operational-amplifier layout.
What is the difference between a zero-drift amplifier and a conventional op amp?
A zero-drift amplifier continuously corrects its offset to achieve very low drift, while a conventional amplifier relies on resistor matching and internal compensation that may still vary with temperature. The ICL7652CPD+ uses this chopping approach to improve low-frequency precision. Its listed 450 kHz gain-bandwidth product and 0.5 V/us slew rate remain important because zero drift does not automatically make the device suitable for wideband or high-speed signals.
ICL7652CPD+ versus ICL7652CPD — is the difference only the plus suffix?
ICL7652CPD+ and ICL7652CPD represent closely related ordering forms of the same 14-PDIP device family, and the public listing for ICL7652CPD+ explicitly identifies the zero-drift amplifier and package. The plus suffix is not a package-changing code. Any order substitution should still be checked against the manufacturer ordering table for temperature grade, lead finish, and lifecycle status before treating the parts as interchangeable.
What can replace ICL7652CPD+?
ICL7652CPD, ICL7652CPD-2, and ICL7652CTV are the closest same-family candidates identified for the ICL7652CPD+ because they are associated with the ICL7652 family and preserve the 14-pin DIP form considered here. No current cross-brand replacement is established by the cited cross-reference results. Use the Request a Quote form for availability questions, and validate any candidate against the full datasheet, especially offset drift, supply range, noise, and package pinout.
When should I choose ICL7652CPD+ instead of ICL7652CTV?
Choose ICL7652CPD+ only when maintaining an existing design and its ordering conditions matter more than selecting a currently supported new device. ICL7652CTV is a related ICL7652-family orderable that may suit an existing qualified platform, but the suffix-level temperature, qualification, and lifecycle differences must be checked in the manufacturer ordering information. For new development, a currently supported precision amplifier is generally more sustainable than either obsolete-family choice.
Is ICL7652CPD+ suitable for high-impedance sensor signals?
Yes, the listed 15 pA input bias current makes the ICL7652CPD+ suitable for many high-impedance sensor interfaces because the amplifier contributes little DC loading to the source. The 700 uV input offset and zero-drift architecture can improve low-frequency accuracy, but the complete signal path must still account for source noise, sensor leakage, resistor thermal drift, input filtering, and amplifier input common-mode limits. Gain and bandwidth should be selected together.
Can TLC2652ACP replace ICL7652CPD+?
No drop-in replacement should be assumed from the available comparison information. TLC2652ACP is listed as an 8-pin DIP amplifier, whereas ICL7652CPD+ uses a 14-PDIP package, so it cannot occupy the same PCB footprint without redesign. Its 1.9 MHz gain-bandwidth and 3.1 V/us slew rate also differ substantially from the ICL7652CPD+ values of 450 kHz and 0.5 V/us. Use it only for a deliberate redesign.
How much bandwidth can ICL7652CPD+ provide in an amplifier stage?
The ICL7652CPD+ has a 450 kHz gain-bandwidth product, so closed-loop bandwidth decreases as noise gain or command gain increases under the usual single-pole approximation. For example, a noise gain of 10 would provide roughly 45 kHz closed-loop bandwidth before accounting for additional limitations. The 0.5 V/us slew rate must also satisfy large-signal requirements. Confirm stability, output loading, and noise-gain behavior with the complete application circuit.
What is the lead time for ICL7652CPD+?
Lead time for the obsolete ICL7652CPD+ must be confirmed for the exact package and order quantity. Request the current quotation through the Request a Quote form on this page and include your required quantity, date code, and traceable-lot requirements. Because the device is obsolete, an apparent availability statement does not by itself guarantee a stable supply schedule or future repeat orders.
How much does ICL7652CPD+ cost and where can it be purchased?
Use the Request a Quote form on this page for the current commercial terms of ICL7652CPD+, including quantity, availability, and lead time. The part is obsolete, so quotations should identify whether the offer is factory surplus, authorized distribution stock, or another traceable supply channel. Confirm the exact 14-PDIP order code and any date-code requirements before placing an order.
Is ICL7652CPD+ RoHS compliant and qualified for automotive use?
The RoHS and REACH status of the exact ICL7652CPD+ order code must be confirmed from the manufacturer product documentation before a compliant release. Automotive qualification should not be inferred from the device's precision characteristics; the product information must explicitly show AEC-Q100 qualification for that orderable. Until the applicable declaration is available, treat both RoHS status and automotive qualification as unconfirmed.

Technische Referenzdaten für ICL7652CPD+ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose ICL7652CPD+ when maintaining an existing 14-PDIP precision-amplifier design requires the known 450 kHz gain-bandwidth product, 15 pA input bias current, and 0.5 V/us slew rate. ICL7652CPD is the closest same-package ordering candidate when the manufacturer ordering table confirms that its grade, lead finish, and lifecycle terms meet the system requirement. ICL7652CPD-2 or ICL7652CTV may fit specific temperature-grade or legacy sourcing needs, but those suffix-level conditions must be verified rather than inferred. TLC2652ACP and TLC2652AI-8D are not drop-in choices because their 8-pin packages differ from the 14-pin target. For a new product with no installed-base constraint, prefer a currently supported precision amplifier with documented offset drift, bias current, noise, supply range, and lifecycle status.

Vergleich mit Alternativen

Parameter Dieses Produkt ICL7652CPD ICL7652CPD-2 ICL7652CTV
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Package 14-PDIP (0.300 inch, 7.62 mm) 14-PDIP (0.300 inch, 7.62 mm) 14-PDIP (0.300 inch, 7.62 mm) 14-PDIP (0.300 inch, 7.62 mm)
Amplifier Type Zero-Drift Operational Amplifier Zero-Drift Operational Amplifier Zero-Drift Operational Amplifier Zero-Drift Operational Amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit
Gain-Bandwidth Product 450 kHz 450 kHz 450 kHz 450 kHz
Slew Rate 0.5 V/us 0.5 V/us 0.5 V/us 0.5 V/us
Input Bias Current 15 pA 15 pA 15 pA 15 pA
Input Offset Voltage 700 uV 700 uV 700 uV 700 uV

Wichtigste Unterscheidungsmerkmale

  • Low input bias current supports high-impedance sources (vs. ICL7652CTV)
  • Same-family 14-pin footprint supports orderly substitution (vs. ICL7652CPD-2)
  • Lower listed gain-bandwidth product than the TLC2652 comparison family (vs. TLC2652ACP)

Designhinweise

Keep input and feedback traces short, and avoid routing high-impedance input nodes beside switching supplies, relay contacts, or digital clock lines. If the input source has high source impedance, use a guarded layout and consider a small input capacitance for noise filtering, but verify that the resulting pole does not destabilize the intended noise gain. The 15 pA input bias current makes leakage control important even though the amplifier's own bias contribution is low.

Do not select this amplifier solely because it is described as zero-drift. The 700 uV input offset remains part of the absolute-error budget, and the 450 kHz gain-bandwidth product must be divided by the required noise gain to estimate closed-loop bandwidth. Also check the 0.5 V/us slew rate against the largest expected output step. These three checks can prevent an otherwise suitable precision amplifier from failing accuracy, stability, or large-signal requirements.

Decouple the power pins close to the device with the capacitance and ESR range specified by the manufacturer datasheet. For chopper-stabilized amplifiers, power-supply ripple and chopping-related output artifacts may matter even when the dominant specification is input-offset drift. Evaluate the output over the intended measurement bandwidth and inspect the application circuit for residual modulation or clock-spectrum components before using the amplifier in sensitive measurements.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The exact lead-free, RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals declarations for ICL7652CPD+ require confirmation from the manufacturer product documentation.

Ähnliche Suchanfragen

ICL7652CPD+ datasheet ICL7652CPD+ pinout ICL7652CPD+ datasheet pdf ICL7652CPD+ specifications ICL7652CPD+ equivalent ICL7652CPD+ replacement ICL7652CPD+ cross reference ICL7652CPD+ price ICL7652CPD+ stock Maxim Integrated ICL7652CPD+ ICL7652CPD+ 14-DIP pinout ICL7652CPD+ zero drift amplifier ICL7652CPD+ vs ICL7652CTV ICL7652CPD+ sensor signal conditioning

Verwandte Bauteile & Begriffe

Maxim Integrated ICL7652CPD+ ICL7652CPD ICL7652CPD-2 ICL7652CTV TLC2652ACP zero-drift operational amplifier chopper-stabilized amplifier precision amplifier signal-conditioning amplifier input offset voltage input bias current gain-bandwidth product slew rate 14-PDIP DIP package family through-hole package surface-mount package hierarchy bridge sensor strain gauge data acquisition instrumentation amplifier high-impedance sensor obsolete component
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen