Renesas Electronics

ICS409MLF - 80MHz LVCMOS PLL Clock Synthesizer | Renesas

Teilenummer: ICS409MLF ✓ Aktiv
3 V to 3.6 V Vdss 8-SOIC Package 80 MHz Speed
MOQ: 1 |

ICS409MLF Übersicht

Renesas Electronics ICS409MLF is a PC peripheral clock synthesizer with a 14.31818 MHz crystal input, an integrated phase-locked loop, and a maximum output frequency of 80 MHz in an 8-pin SOIC package. The device generates a 1:3 input-to-output clock ratio and uses LVCMOS-compatible outputs to support low-cost PC peripheral clocking.

A clock synthesizer is a timing IC that converts a lower-frequency reference into one or more system clock signals. Clock synthesizer, PLL clock generator, and frequency multiplier are related terms within the clock and timing IC hierarchy, which also includes clock buffers, dividers, oscillators, and timer ICs. The ICS409MLF is intended to reduce the number of discrete components required in personal-computer peripheral applications.

The ICS409MLF supports a common 14.31818 MHz crystal through its on-chip crystal oscillator. Its PLL-based architecture multiplies the reference clock by three, producing an 80 MHz maximum output. The specified operating supply range is 3 V to 3.6 V, making the device suitable for systems using a 3.3 V clock domain.

The principal technical benefit is integration: a crystal oscillator, phase-locked loop, and frequency-multiplying output are combined in one IC. This reduces the component count compared with discrete oscillator and multiplier arrangements. The single-circuit implementation also simplifies clock routing, although output drive, jitter, phase accuracy, and loop stability must still be evaluated against the timing requirements of the target peripheral.

Typical applications include PC peripheral interfaces, legacy storage and bus controllers, embedded PC-compatible systems, and communication equipment requiring a 3.3 V LVCMOS reference clock. A 14.31818 MHz crystal is normally connected at the reference input, while the divided PLL architecture generates the higher-frequency clock used by the peripheral subsystem.

When laying out the circuit, keep the crystal and load capacitors close to the device and route the clock output away from noisy switching nodes. Confirm ground-plane continuity, output-load assumptions, and the required clock frequency before releasing the layout. Pin assignments and crystal-load details should be taken directly from the manufacturer pin-description table and application guidance.

Drop-in-Alternativen für ICS409MLF – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ICS409MLF (gleiche Bauform und Footprint) – abweichend in Package.

Renesas Electronics
Package: 8-pin SOIC
Vergleichen mit ICS409MLF →

ICS409M

✅ Drop-In
Renesas Electronics
📦 8-SOIC
Clock/Frequency Synthesizer · Yes · Crystal · LVCMOS · 80 MHz · 1 · 1:3 · On-chip

Preis auf Anfrage

Datenblatt ansehen →

ICS409MLF Technische Daten

Device Type Clock/Frequency Synthesizer
PLL Yes
Reference Input 14.31818 MHz crystal
Output Logic LVCMOS
Maximum Output Frequency 80 MHz
Number of Circuits 1
Input-to-Output Frequency Ratio 1:3
Supply Voltage Range 3 V to 3.6 V
Gehäuse 8-SOIC
Montageart Surface Mount
On-Chip Crystal Oscillator Yes

ICS409MLF 8-soic Pinbelegungsleitfaden

Pinbelegung für ICS409MLF (8-soic-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für ICS409MLF im 8-soic-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ICS409MLF.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ICS409MLF ist geeignet für 6 Anwendungs: PC Peripheral Interface Clocking, Storage Controller Timing, Embedded PC-Compatible Systems, Industrial Communication Equipment, Instrumentation and Test Equipment, Legacy Bus and Interface Timing.

🖥️

PC Peripheral Interface Clocking

The ICS409MLF fits legacy and embedded PC peripheral interfaces that require a stable 80 MHz clock in a 3.3 V domain. Its 14.31818 MHz crystal input and 1:3 frequency relationship let the on-chip PLL generate the required output without a separate frequency multiplier. The 8-SOIC package limits board area, while LVCMOS output suits conventional CMOS loads. Validate edge rate, jitter, and PLL startup in the complete interface timing environment.

🖥️

Storage Controller Timing

The ICS409MLF can provide the 80 MHz peripheral timing reference used by storage-controller and bus-interface sections of PC-compatible systems. Its integrated crystal oscillator and PLL reduce the component count compared with separate oscillator and multiplier stages. The 3 V to 3.6 V supply range aligns with 3.3 V controller logic, and the LVCMOS output simplifies interfacing. Designers should still check recovery time, clock duty-cycle limits, and output loading against the storage controller requirements.

🏭

Embedded PC-Compatible Systems

The ICS409MLF is useful in embedded systems that retain PC peripheral timing but require a compact clock implementation. A 14.31818 MHz crystal provides the reference, and the PLL produces the documented 1:3 ratio for an 80 MHz maximum output. Because the clock generator is only 8 pins, it simplifies routing in space-constrained industrial or communications equipment. Confirm the required temperature grade and test the reference oscillator across the intended voltage and temperature range.

🌐

Industrial Communication Equipment

The ICS409MLF can serve as a local timing source within industrial communication equipment that uses a PC-compatible clock domain. Its single PLL circuit, 3.3 V supply range, and compact 8-SOIC package support designs requiring deterministic integration with limited board space. The LVCMOS clock can feed compatible counters, communication controllers, or timing dividers. Use short clock traces, maintain a continuous ground reference, and validate jitter against the communication protocol's timing budget.

🔧

Instrumentation and Test Equipment

The ICS409MLF can provide a compact 80 MHz reference clock for instrumentation subsystems that divide or gate the output into lower-rate timing domains. The integrated oscillator and PLL reduce assembly complexity, while LVCMOS output supports ordinary CMOS routing. For measurement equipment, place the crystal close to the device, provide a low-noise supply, and avoid routing the clock through switch-node neighborhoods. Confirm output jitter and frequency accuracy before using it as a precision reference.

🔧

Legacy Bus and Interface Timing

The ICS409MLF is appropriate for legacy bus and peripheral-controller designs that expect an 80 MHz clock derived from a 14.31818 MHz reference. The 1:3 PLL relationship provides a straightforward way to generate the clock from a common crystal source, and the 3.3 V operation supports mixed legacy system architectures. The design must confirm that the 8-SOIC controller accepts the required clock amplitude and edge quality. Add source termination only if measurement shows excessive ringing.

What is the operating frequency of the ICS409MLF?
The ICS409MLF accepts a 14.31818 MHz crystal and provides an output frequency of up to 80 MHz. The manufacturer describes the device as a PC peripheral clock synthesizer using a 1:3 input-to-output frequency ratio. This relationship means the 14.31818 MHz reference is tripled to produce the principal clock output.
What type of IC is the ICS409MLF?
The ICS409MLF is a single-circuit PLL-based clock and frequency synthesizer with LVCMOS outputs. It incorporates an on-chip crystal oscillator and is intended to support PC peripheral clock requirements. The 8-SOIC package and 3 V to 3.6 V operating supply make it a compact timing solution for 3.3 V systems.
Where can I download the ICS409MLF datasheet PDF?
The ICS409MLF datasheet is available through the datasheet landing page linked on this product page and through the manufacturer product resources. Use the pin-description table, electrical characteristics, and application information from the manufacturer datasheet before assigning PCB connections. The linked PDF landing page identifies the document as five pages.
Where can I find the ICS409MLF pinout?
The ICS409MLF pinout is documented in the manufacturer datasheet because the public product results do not reproduce a complete, trustworthy pin-description table. The device uses an 8-SOIC package, so the eight physical pins must be assigned from that table rather than inferred from a generic footprint image. Check signal names, power pins, and crystal connections before PCB release.
Can the ICS409MLF replace a discrete crystal oscillator and clock multiplier?
The ICS409MLF can replace a discrete oscillator and frequency-multiplier arrangement when the system requires a 14.31818 MHz reference and a 3:1 clock relationship. Its PLL and integrated oscillator reduce component count in PC peripheral designs. Final equivalence still depends on output jitter, edge quality, load capacitance, and clock-signal integrity requirements.
Is the ICS409MLF suitable for a 3.3 V PC peripheral design?
The ICS409MLF is suitable for a 3.3 V PC peripheral design because its specified supply range is 3 V to 3.6 V and its output is LVCMOS. The device generates a maximum 80 MHz clock from a 14.31818 MHz crystal. Verify startup, PLL lock, and timing margins in the final system.
What can replace the ICS409MLF?
A valid replacement for the ICS409MLF must use the same 8-SOIC footprint, provide compatible 3.3 V power, accept the intended crystal reference, and reproduce the required clock ratio and LVCMOS interface. The ICS409M is the closest same-family candidate identified, but it should not be treated as an automatic substitute without checking its grade, pin table, and frequency parameters.
What is the best Renesas equivalent for the ICS409MLF?
The ICS409M is the closest identified Renesas-family alternative because both belong to the ICS409 clock-synthesizer series. Compatibility depends on matching the 8-SOIC pin configuration, 14.31818 MHz reference arrangement, 1:3 frequency relationship, 3 V to 3.6 V supply range, and LVCMOS output requirements. Review ordering information before approving it as a drop-in replacement.
ICS409MLF vs ICS409M - which is better for a PC peripheral clock?
The ICS409MLF is the better-defined choice for a new 3.3 V PC peripheral design because its package, supply range, reference frequency, output logic, and 1:3 ratio are explicitly identified. The ICS409M is the closer family alternative, but its exact temperature grade and ordering suffix must be checked. A drop-in decision requires pin-for-pin and parameter comparison.
When should I choose the ICS409MLF instead of the ICS409M?
Choose the ICS409MLF when the design specifically requires the MLF 8-SOIC ordering configuration and a documented 3 V to 3.6 V operating range with LVCMOS output at up to 80 MHz. Consider the ICS409M when its exact temperature grade and pin arrangement satisfy the same requirements. The distinction may be commercial or grade-specific rather than functional.
Is the ICS409MLF still available for purchase?
The ICS409MLF is listed as a Renesas Electronics clock and frequency synthesizer on current distributor product pages. Use the Request a Quote form on this page to request current availability, minimum order quantity, and lead time for the exact MPN. Inventory and schedule should be confirmed before committing a production date.
What is the current price of the ICS409MLF?
The current commercial price for the ICS409MLF should be requested through the Request a Quote form on this page. The form reflects the exact ordering code and current purchasing conditions more reliably than a static listing. Engineers can also request quantity breaks and production lead time in the same request.
What is the lead time for the ICS409MLF?
Request the current ICS409MLF lead time through the Request a Quote form on this page. Lead time can depend on order quantity, scheduled deliveries, and component availability, so it should be confirmed for the planned build quantity. Do not infer production availability from a distributor search result alone.
Is the ICS409MLF in stock?
Stock status should be confirmed through the Request a Quote form on this page for the exact ICS409MLF ordering code. Because supply can change by quantity and fulfillment schedule, request the current on-hand position and lead time directly. Include your forecast quantities when requesting a quotation.
What are the key specifications of the ICS409MLF that engineers should know?
The ICS409MLF is a 3 V to 3.6 V single-circuit PLL clock synthesizer in an 8-SOIC package. It accepts a 14.31818 MHz crystal, produces LVCMOS output, reaches a maximum frequency of 80 MHz, and uses a 1:3 input-to-output ratio. These parameters place it in the PC peripheral clock-generator category.

Technische Referenzdaten für ICS409MLF – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the ICS409MLF for a PC peripheral or embedded PC-compatible design that requires an 80 MHz LVCMOS clock derived from a 14.31818 MHz crystal and operates from a 3.3 V supply. The integrated oscillator and PLL reduce the component count relative to discrete oscillator and multiplier circuitry. The ICS409M is the closest identified same-family alternative and should be considered when its exact ordering configuration, temperature grade, and pin assignment meet the system requirements. Before substituting either device, compare the crystal load capacitance, PLL lock behavior, output jitter, duty-cycle limits, and supply current. Do not select a generic PLL merely because its maximum frequency is also 80 MHz: the reference source, multiplication ratio, logic thresholds, package dimensions, and clock-output function must all align with the existing 8-SOIC footprint.

Vergleich mit Alternativen

Parameter Dieses Produkt ICS409M
Brand Renesas Electronics Renesas Electronics
Package 8-SOIC 8-SOIC
Device Type Clock/Frequency Synthesizer Clock/Frequency Synthesizer
PLL Yes Yes
Reference Input 14.31818 MHz crystal 14.31818 MHz crystal
Output Logic LVCMOS LVCMOS
Maximum Output Frequency 80 MHz 80 MHz
Supply Voltage Range 3 V to 3.6 V 3 V to 3.6 V
Input-to-Output Ratio 1:3 1:3
Number of Circuits 1 1

Wichtigste Unterscheidungsmerkmale

  • Integrated reference oscillator and 3:1 multiplier (vs. ICS409M)
  • Compact 8-SOIC implementation (vs. ICS409M)
  • Defined 3.3 V operating domain (vs. ICS409M)

Designhinweise

Place the 14.31818 MHz crystal and its load capacitors directly beside the crystal-input pins. Keep the crystal loop compact, remove unnecessary copper beneath the crystal footprint where the layout guidance permits, and provide a continuous ground plane. Long crystal traces increase parasitic capacitance and pickup, which can reduce startup reliability or disturb frequency stability.

Route the 80 MHz LVCMOS clock as a short, controlled-impedance trace to the receiving circuit and keep it away from switching nodes and high-current return paths. Confirm output rise and fall time, duty-cycle distortion, ringing, and the receiver's allowable capacitance. A source-series termination resistor may be added if edge measurements reveal excessive overshoot, but it should not be populated without checking the clock amplitude at the load.

Do not substitute the 14.31818 MHz reference with an arbitrary oscillator without checking the PLL ratio and output frequency. The specified architecture accepts a 14.31818 MHz crystal and provides a 1:3 relationship, yielding up to 80 MHz. Also verify the exact pin names from the manufacturer datasheet because an eight-pin package does not, by itself, establish the power, ground, crystal, and clock-output assignments.

Operate the device only within its specified 3 V to 3.6 V supply range. Place the supply-decoupling capacitor close to the corresponding power pin and provide a low-impedance return path to the ground reference. Clock-generation circuits can exhibit startup or lock disturbances when the supply is noisy, so separate the reference oscillator from aggressive switching-regulator layouts where board partitioning permits.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were present in the product information for the ICS409MLF. Confirm compliance and automotive qualification using the current manufacturer product documentation before procurement.

Daten verifiziert am: 2026-11-16 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

ICS409MLF datasheet ICS409MLF pinout ICS409MLF datasheet pdf ICS409MLF equivalent ICS409MLF replacement ICS409MLF cross reference ICS409MLF vs ICS409M ICS409MLF 80MHz LVCMOS ICS409MLF 8-SOIC footprint ICS409MLF PC peripheral clock ICS409MLF price ICS409MLF stock Renesas ICS409MLF

Verwandte Bauteile & Begriffe

Renesas Electronics ICS409MLF ICS409M Clock synthesizer PLL clock generator Frequency synthesizer Clock and timing IC Semiconductor 14.31818 MHz crystal 80 MHz output 1:3 frequency ratio LVCMOS 3.3 V clock domain 8-SOIC SOIC family Surface mount PC peripheral Integrated crystal oscillator Phase-locked loop Clock jitter Output duty cycle Crystal load capacitance
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen