Renesas Electronics

ICS527R-01 - 160 MHz Zero-Delay Clock Slicer | Renesas

Teilenummer: ICS527R-01 ✓ Aktiv
28-SSOP Package 160 MHz Speed
MOQ: 1 |

ICS527R-01 Übersicht

The Renesas Electronics ICS527R-01 is a user-configurable zero-delay clock buffer and clock slicer with a 160 MHz operating frequency in a 28-SSOP package measuring 3.90 mm wide. It distributes a source clock across multiple outputs with matched propagation characteristics while allowing the user to generate multiplied or divided output-clock relationships from the input frequency.

A clock slicer is a specialized timing integrated circuit that belongs to the clock and timing IC family, alongside clock buffers, generators, phase-locked loops, and frequency synthesizers. Its purpose is to control the relationship between an input clock and its outputs so that downstream circuits receive coherent, predictable timing references. The zero-delay architecture minimizes added latency between the source and fanout outputs, which is important when several subsystems must operate from the same clock domain.

Key characteristics of the ICS527R-01 include a 160 MHz maximum clock frequency, a 28-SSOP package, zero-delay fanout operation, and user-programmable clock multiplication or division capabilities. The device is suited to systems that require more than one usable clock output without introducing uncontrolled skew between receiving circuits. Its configuration flexibility allows a single clocking component to serve systems whose operating modes require different output-clock relationships.

The ICS527R-01 combines clock distribution with programmable ratio generation. Instead of cascading a separate divider or multiplier after a fanout buffer, the system can derive the required output relationships from one package. This reduces circuit count and keeps the clock-generation structure compact. Exact control-pin states, output ratios, supply voltage, and operating-temperature limits should be confirmed in the Renesas 527-01 datasheet before the device is placed in a new design.

Typical uses include processor and peripheral clock distribution, telecommunications line-card timing, data-acquisition systems, test and measurement equipment, and industrial control modules. In a multi-channel data-conversion system, a common sliced clock can feed converters that must launch data against a shared time reference. In a telecommunications design, the fanout outputs can support separate transmit, receive, and processing sections that must remain synchronized.

When laying out the PCB, keep clock traces short, use controlled-impedance routing where required, and avoid routing sensitive clock nets beside high-current switching nodes. Follow the package pin arrangement and recommended decoupling configuration in the manufacturer datasheet. Validate output ratio settings and startup behavior in hardware because incorrect control sequencing or an unsuitable input clock can produce invalid timing at downstream circuits.

This page combines the verified product identity, package information, family-level functions, drop-in replacement options, application guidance, and engineering design notes in one engineering-focused reference.

Drop-in-Alternativen für ICS527R-01 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

ICS527R-01I

✅ Drop-In
📦 28-SSOP
Same 28-SSOP footprint and 160 MHz clock-slicer family; the I suffix identifies a distinct catalog grade with a 0 MHz frequency-rating difference.

📋 Referenzalternative (nicht im Katalog)

ICS527R-02T

✅ Drop-In
📦 28-SSOP
Same 28-SSOP clock-buffer format and 160 MHz class; the -02 suffix denotes an alternate slicing configuration with a 0 MHz rating difference.

📋 Referenzalternative (nicht im Katalog)

ICS527R-01T

✅ Drop-In
📦 28-SSOP
Same 28-SSOP pin package and 160 MHz clock function; the T suffix distinguishes the catalog variant with a 0 MHz frequency-rating difference.

📋 Referenzalternative (nicht im Katalog)

ICS527-01

✅ Drop-In
📦 28-SSOP
Base member of the same ICS527 zero-delay clock-slicer family with a 0 MHz frequency-rating difference; ordering suffix determines qualification.

📋 Referenzalternative (nicht im Katalog)

527R-01LF

✅ Drop-In
📦 28-SSOP
Legacy IDT clock-buffer equivalent with a 0 MHz frequency-rating difference and consistent terminals and package characteristics.

📋 Referenzalternative (nicht im Katalog)

ICS527R-01 Technische Daten

Product Type User-configurable zero-delay clock buffer and clock slicer
Maximale Taktfrequenz 160 MHz
Clock Output Architecture Zero-delay fanout with configurable multiplied or divided output relationships
Output Count 1 output listed in the product listing
Gehäuse 28-SSOP
Package Width 3.90 mm (0.154 in)
Montageart Surface mount

ICS527R-01 3.90 mm (0.154 in) Pinbelegungsleitfaden

Pinbelegung für ICS527R-01 (3.90 mm (0.154 in)-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für ICS527R-01 im 3.90 mm (0.154 in)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ICS527R-01.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ICS527R-01 ist geeignet für 6 Anwendungs: Telecommunications Line-Card Clock Distribution, Processor and Peripheral Clock Fanout, Data-Acquisition and Conversion Systems, Test and Measurement Instrumentation, Industrial Control and Automation Modules, Network and Interface Timing.

🌐

Telecommunications Line-Card Clock Distribution

The ICS527R-01 fits line-card designs that must distribute one reference clock to transmit, receive, and processing circuits while preserving a controlled relationship between outputs. Its zero-delay fanout operation and user-configurable multiplied or divided outputs allow the clock tree to be adapted without adding a separate ratio-conversion stage. At a maximum operating frequency of 160 MHz, the device supports high-speed backplane and serial-interface subsystems. Keep the source clock and output loads close to the package, follow the pin table in the Renesas 527-01 datasheet, and confirm that each clock domain tolerates the selected output ratio.

🖥️

Processor and Peripheral Clock Fanout

The ICS527R-01 can distribute a common clock to a processor, memory interface, and peripheral block that must operate within one coherent timing domain. Its zero-delay buffer behavior minimizes additional latency at the distribution point, while configurable output relationships provide flexibility when downstream circuits require derived clocks. The 28-SSOP package keeps the component compact for a multi-rail controller board. Validate input-clock amplitude and slew rate against the Renesas 527-01 datasheet, and use short trace lengths to preserve edge quality and minimize clock skew between receiving devices.

📊

Data-Acquisition and Conversion Systems

In a parallel or multiplexed data-acquisition system, the ICS527R-01 provides a shared timing reference for converters and capture logic. Synchronizing the sampling clock across multiple channels reduces aperture-time and trigger-path variation that otherwise develops when each channel uses an independent clock source. The device supports output-clock relationships derived from one input and operates up to 160 MHz. Place the package centrally relative to the converters, maintain a continuous return path beneath clock traces, and confirm converter clock-input limits before committing the system timing architecture.

🔧

Test and Measurement Instrumentation

The ICS527R-01 is appropriate for instrumentation that must feed multiple acquisition, modulation, or trigger sections from a common clock source. A single configurable clock slicer can generate several related outputs, simplifying the architecture compared with a fanout buffer followed by separate ratio converters. Its 160 MHz operating frequency supports demanding laboratory and industrial test systems, while the 28-SSOP package simplifies board routing. For high-fanout or long-trace configurations, terminate unused outputs according to the manufacturer guidance and verify crosstalk, edge rate, and output-to-output timing during prototype validation.

🏭

Industrial Control and Automation Modules

The ICS527R-01 can organize the timing reference for an industrial controller containing a processor, communications interface, and high-speed counter or data-conversion block. Deriving several clock relationships from one input reduces duplicated oscillators and keeps the design centered on a common reference. Its 160 MHz maximum frequency offers margin for digital control subsystems, although the selected supply and temperature limits determine the usable operating range. Follow the reference circuit and decoupling arrangement in the Renesas 527-01 datasheet, and isolate clock routing from relay, motor, and power-converter switching nodes.

🔌

Network and Interface Timing

The ICS527R-01 can serve as the central clock-distribution element in interface cards where Ethernet, serial, storage, and fabric sections require a shared timing relationship. Using one clock slicer instead of separate fanout and conversion components can improve source-to-load consistency and simplify control of the clock tree. The device's 160 MHz capability and 28-SSOP footprint suit compact interface hardware. Check the data-sheet input threshold, output loading, and supply conditions against the actual link rates, and keep sensitive clock traces away from connector returns and high-speed data lanes.

Zusammenfassung der empfohlenen Produkte

ICS527R-01I Related same-family clock-distribution variant Verwendet in: Telecommunications Line-Card Clock Distribution, Test and Measurement Instrumentation, Network and Interface Timing ICS527-01 Base ICS527 clock-slicer family member Verwendet in: Telecommunications Line-Card Clock Distribution, Data-Acquisition and Conversion Systems, Industrial Control and Automation Modules ICS527R-01T Related Renesas ICS527 ordering variant Verwendet in: Processor and Peripheral Clock Fanout, Test and Measurement Instrumentation ICS527R-02T Alternate same-package clock-slicing configuration Verwendet in: Processor and Peripheral Clock Fanout, Industrial Control and Automation Modules 527R-01LF Legacy-compatible clock-buffer equivalent Verwendet in: Data-Acquisition and Conversion Systems, Network and Interface Timing
What is the ICS527R-01 and what does it do?
The ICS527R-01 is a Renesas user-configurable zero-delay clock buffer and clock slicer operating up to 160 MHz. According to the Renesas 527-01 datasheet, it generates output-clock relationships that are multiplied or divided from an input clock while distributing the result with zero added delay. The device is packaged in a 28-SSOP and is intended for systems needing coordinated clock fanout without a separate multiplier or divider stage.
What is the maximum operating frequency of the ICS527R-01?
The ICS527R-01 operates at up to 160 MHz. This maximum frequency appears in the Renesas product listing and defines the upper operating point for the device's clock-buffer and clock-slicing functions. The usable operating point must also remain within the supply-voltage and temperature limits stated in the 527-01 datasheet, because frequency capability is normally qualified together with those operating conditions.
Where can I download the ICS527R-01 datasheet PDF?
The official Renesas 527-01 datasheet is available from the manufacturer document page at https://www.renesas.com/en/document/dst/527-01-datasheet. It is the primary document for pin assignments, supported clock ratios, control logic, electrical characteristics, package dimensions, and recommended application circuits. Use the manufacturer document rather than a distributor summary when defining PCB connections and timing margins.
Where can I find the ICS527R-01 pinout?
The ICS527R-01 pinout is documented in the pin-description section of the Renesas 527-01 datasheet. The device uses a 28-SSOP package with a 3.90 mm body width, so the schematic and layout must follow the manufacturer's numbered pin arrangement. Assign tracks by the numbered pin table and confirm every control input, clock input, and clock output before releasing a PCB layout.
Can the ICS527R-01 replace an IDT 527R-01LF?
The ICS527R-01 is commonly identified as a replacement for the legacy IDT 527R-01LF because the comparison data describes matching terminals, packages, and principal operating characteristics. The IDT part is also described as a single 28-pin clock-buffer implementation. Production substitution should still be confirmed against supply-voltage levels, timing limits, and the exact footprint drawing in both datasheets.
What is the difference between ICS527R-01 and ICS527R-01I?
The ICS527R-01 and ICS527R-01I share the 28-SSOP clock-slicer format and the same 160 MHz device family. The suffix distinguishes the catalog versions, with ICS527R-01I appearing as a separate Renesas ordering code in distributor listings. Because the suffix may encode a qualification or temperature distinction, use the ordering table in the 527-01 datasheet to confirm the grade required by your system.
When should I choose the ICS527R-01 over a basic zero-delay buffer?
Choose the ICS527R-01 when one source clock must feed several functions and the output relationships need to be multiplied or divided from that input. A conventional zero-delay buffer generally provides fanout with a fixed clock relationship. The ICS527R-01 consolidates distribution and programmable ratio generation into one 28-SSOP device, reducing the number of separate timing components in the clock tree.
Is the ICS527R-01 suitable for telecommunications and industrial systems?
The ICS527R-01 is suitable for clock-tree designs in telecommunications, industrial control, data acquisition, and test systems where multiple sections must share a coherent reference. Its 160 MHz operating point and configurable multiplied or divided outputs support distributed clocking requirements. Check the qualified temperature range and exact supply limits in the Renesas 527-01 datasheet before using it in a specific environmental class.
How should the ICS527R-01 be laid out on a PCB?
Place the ICS527R-01 close to the source clock and the loads it serves, and route clock nets as short, continuous traces away from high-current switching nodes. Follow the pin arrangement and decoupling recommendations in the Renesas 527-01 datasheet. If the outputs carry a significant fanout, use controlled-impedance routing and confirm output loading, edge rate, and return-path continuity during signal-integrity review.
What can replace the ICS527R-01?
The closest same-family replacement is the Renesas ICS527R-01I, which retains the 28-SSOP clock-buffer format and 160 MHz clocking function. The legacy IDT 527R-01LF is another documented equivalent with consistent terminals and package characteristics. The ICS527R-02T and ICS527R-01T are related 28-SSOP catalog variants. Confirm the required output ratio, control logic, and operating grade before approving any substitution.
What are the key specifications of ICS527R-01 that engineers should know?
The principal ICS527R-01 specifications are a 160 MHz maximum operating frequency, a 28-SSOP package, a 3.90 mm package width, and user-configurable multiplied or divided output clocks. The device is described as a zero-delay clock buffer and clock slicer with one output shown in the distributor product listing. Pin count, supply limits, output count, and timing specifications should be read directly from the Renesas 527-01 datasheet.
Is ICS527R-01 the same as ICS527R-02T?
The ICS527R-01 and ICS527R-02T are related Renesas 28-SSOP clock slicers, but their suffixes identify different catalog variants. The ICS527R-02T comparison listing describes both as zero-delay clock-buffer ICs in 28-SSOP packages, while the ICS527R-01 family supports user-configurable output relationships. Treat them as related rather than automatically identical, and verify the supported ratio and pin-function table in the manufacturer datasheet.
What is the best Renesas equivalent for the ICS527R-01?
The best same-manufacturer alternative is the ICS527R-01I when the required grade and 28-SSOP configuration match the original design. It appears in the same Renesas ICS527 family and retains the clock-slicing role at the same package level. The Renesas cross-reference and ordering tables should be used to confirm availability, temperature grade, and any change in ordering suffix before release.
How much does the ICS527R-01 cost and where can it be purchased?
Current commercial terms for the ICS527R-01 are obtained through the Request a Quote form on this page. The form supports quantity-break review, current availability checking, and lead-time confirmation for the exact ordering code. Because distributor pricing and stock change frequently, request the current quote rather than relying on an archived price when planning a production release.
What is the lead time and stock status for the ICS527R-01?
Request the current lead time, stock position, and minimum order quantity through the Request a Quote form on this page. The Renesas ordering code, package suffix, and required quantity determine the procurement outcome, and legacy clock products may be distributed through different inventory channels. A quote response provides the most current commercial information for the exact ICS527R-01 configuration.

Technische Referenzdaten für ICS527R-01 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the ICS527R-01 when the design needs zero-delay clock fanout plus configurable multiplied or divided outputs from a single reference clock, particularly in communications, industrial control, data-acquisition, and test equipment. Choose ICS527R-01I when the procurement grade or ordering suffix required by your system matches that catalog version while retaining the same 28-SSOP footprint and 160 MHz class. Consider ICS527R-02T only after confirming that its specific slicing configuration matches the required clock ratios, and use ICS527R-01T for the corresponding ordering-temperature requirement. The legacy IDT 527R-01LF is a practical second-source option for existing zero-delay clock-buffer designs, but it does not provide the same documented ratio flexibility. For every substitution, verify supply voltage, temperature grade, control-pin states, timing limits, and the manufacturer footprint drawing before production release.

Vergleich mit Alternativen

Parameter Dieses Produkt ICS527R-01I ICS527R-02T ICS527R-01T ICS527-01 527R-01LF
Package 28-SSOP 28-SSOP 28-SSOP 28-SSOP 28-SSOP 28-SSOP
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Integrated Device Technology
Device Type Zero-delay clock buffer and clock slicer Zero-delay clock buffer and clock slicer Zero-delay clock buffer and clock slicer Zero-delay clock buffer and clock slicer User-configurable zero-delay clock buffer Zero-delay clock buffer
Maximum Clock Frequency 160 MHz 160 MHz 160 MHz 160 MHz 160 MHz 160 MHz
Package Width 3.90 mm (0.154 in) 3.90 mm (0.154 in) 3.90 mm (0.154 in) 3.90 mm (0.154 in) 3.90 mm (0.154 in) 3.90 mm (0.154 in)
Pin Count 28 pins 28 pins 28 pins 28 pins 28 pins 28 pins

Wichtigste Unterscheidungsmerkmale

  • Combines zero-delay fanout with configurable clock relationships (vs. 527R-01LF)
  • Same 160 MHz clocking class as the closest Renesas variants (vs. ICS527R-01I)
  • Configurable output relationship rather than a fixed-only clock stage (vs. ICS527R-02T)
  • Supports a 160 MHz reference in a compact 28-SSOP footprint (vs. ICS527-01)

Designhinweise

Route the source clock and all output nets as short, continuous traces, and provide a continuous return path beneath each clock route. The ICS527R-01 operates up to 160 MHz, so trace loss, capacitance, and crosstalk can affect edge rate even when the nominal frequency is within specification. Keep the clock paths away from switching-node returns and connector fields, and verify output loading against the electrical-characteristics table in the Renesas 527-01 datasheet.

Follow the manufacturer reference circuit for input and output decoupling, including the component type, placement distance, and connection to the appropriate supply pins. Place the decoupling network close to the package rather than at the power entry point so high-frequency current loops remain compact. Verify that the selected control-input states are valid during reset and power sequencing, because incorrect configuration states can leave the clock outputs in an unintended condition.

Do not treat every 28-SSOP clock-slicer ordering code as electrically identical. Confirm the supported output ratios, control-pin functions, supply limits, and temperature grade in the 527-01 datasheet before substituting ICS527R-01I, ICS527R-02T, ICS527R-01T, or the legacy 527R-01LF. A matching body outline alone does not guarantee identical timing, level, or configuration behavior.

Estimate the device's supply-current contribution at the intended clock frequency, output loading, and supply voltage before finalizing power-budget and thermal calculations. Add the calculated device dissipation to the regulator and copper-area budget for the board. Keep unused outputs in the state recommended by the manufacturer and avoid tying an active output to another output, which can cause excess current and unpredictable timing behavior.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance declarations are not stated in the product information used for this record. Confirm RoHS, REACH, halogen-free, and conflict-minerals status with Renesas for the exact ordering code and current material declaration.

Daten verifiziert am: 2026-11-16 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

ICS527R-01 datasheet ICS527R-01 pinout ICS527R-01 datasheet pdf ICS527R-01 equivalent ICS527R-01 replacement ICS527R-01 vs ICS527R-01I ICS527R-01 160 MHz clock slicer ICS527R-01 28-SSOP Renesas ICS527R-01 ICS527R-01 price ICS527R-01 stock ICS527R-01 clock distribution application ICS527 clock buffer replacement 527R-01LF vs ICS527R-01

Verwandte Bauteile & Begriffe

Renesas Electronics ICS527R-01 ICS527R-01I ICS527R-02T ICS527R-01T ICS527-01 527R-01LF Integrated Device Technology clock slicer zero-delay buffer clock buffer fanout buffer clock and timing IC clock generator phase-locked loop frequency synthesizer 28-SSOP surface mount 160 MHz multiplied clock output divided clock output output-to-output skew clock distribution telecommunications line card
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen