ICS527R-01 - 160 MHz Zero-Delay Clock Slicer | Renesas
MPN: ICS527R-01 ✓ AktifICS527R-01 Ringkasan
A clock slicer is a specialized timing integrated circuit that belongs to the clock and timing IC family, alongside clock buffers, generators, phase-locked loops, and frequency synthesizers. Its purpose is to control the relationship between an input clock and its outputs so that downstream circuits receive coherent, predictable timing references. The zero-delay architecture minimizes added latency between the source and fanout outputs, which is important when several subsystems must operate from the same clock domain.
Key characteristics of the ICS527R-01 include a 160 MHz maximum clock frequency, a 28-SSOP package, zero-delay fanout operation, and user-programmable clock multiplication or division capabilities. The device is suited to systems that require more than one usable clock output without introducing uncontrolled skew between receiving circuits. Its configuration flexibility allows a single clocking component to serve systems whose operating modes require different output-clock relationships.
The ICS527R-01 combines clock distribution with programmable ratio generation. Instead of cascading a separate divider or multiplier after a fanout buffer, the system can derive the required output relationships from one package. This reduces circuit count and keeps the clock-generation structure compact. Exact control-pin states, output ratios, supply voltage, and operating-temperature limits should be confirmed in the Renesas 527-01 datasheet before the device is placed in a new design.
Typical uses include processor and peripheral clock distribution, telecommunications line-card timing, data-acquisition systems, test and measurement equipment, and industrial control modules. In a multi-channel data-conversion system, a common sliced clock can feed converters that must launch data against a shared time reference. In a telecommunications design, the fanout outputs can support separate transmit, receive, and processing sections that must remain synchronized.
When laying out the PCB, keep clock traces short, use controlled-impedance routing where required, and avoid routing sensitive clock nets beside high-current switching nodes. Follow the package pin arrangement and recommended decoupling configuration in the manufacturer datasheet. Validate output ratio settings and startup behavior in hardware because incorrect control sequencing or an unsuitable input clock can produce invalid timing at downstream circuits.
This page combines the verified product identity, package information, family-level functions, drop-in replacement options, application guidance, and engineering design notes in one engineering-focused reference.
Pilihan pengganti yang segera untuk ICS527R-01 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
ICS527R-01I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ICS527R-02T
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ICS527R-01T
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ICS527-01
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
527R-01LF
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ICS527R-01 Spesifikasi
| Product Type | User-configurable zero-delay clock buffer and clock slicer |
| Frekuensi Klock Maksimum | 160 MHz |
| Clock Output Architecture | Zero-delay fanout with configurable multiplied or divided output relationships |
| Output Count | 1 output listed in the product listing |
| Kemasan | 28-SSOP |
| Package Width | 3.90 mm (0.154 in) |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin ICS527R-01 3.90 mm (0.154 in)
Konfigurasi pin untuk ICS527R-01 (3.90 mm (0.154 in) pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk ICS527R-01.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ICS527R-01 patut untuk 6 aplikasis: Telecommunications Line-Card Clock Distribution, Processor and Peripheral Clock Fanout, Data-Acquisition and Conversion Systems, Test and Measurement Instrumentation, Industrial Control and Automation Modules, Network and Interface Timing.
Telecommunications Line-Card Clock Distribution
The ICS527R-01 fits line-card designs that must distribute one reference clock to transmit, receive, and processing circuits while preserving a controlled relationship between outputs. Its zero-delay fanout operation and user-configurable multiplied or divided outputs allow the clock tree to be adapted without adding a separate ratio-conversion stage. At a maximum operating frequency of 160 MHz, the device supports high-speed backplane and serial-interface subsystems. Keep the source clock and output loads close to the package, follow the pin table in the Renesas 527-01 datasheet, and confirm that each clock domain tolerates the selected output ratio.
Disebarkan
Processor and Peripheral Clock Fanout
The ICS527R-01 can distribute a common clock to a processor, memory interface, and peripheral block that must operate within one coherent timing domain. Its zero-delay buffer behavior minimizes additional latency at the distribution point, while configurable output relationships provide flexibility when downstream circuits require derived clocks. The 28-SSOP package keeps the component compact for a multi-rail controller board. Validate input-clock amplitude and slew rate against the Renesas 527-01 datasheet, and use short trace lengths to preserve edge quality and minimize clock skew between receiving devices.
Disebarkan
Data-Acquisition and Conversion Systems
In a parallel or multiplexed data-acquisition system, the ICS527R-01 provides a shared timing reference for converters and capture logic. Synchronizing the sampling clock across multiple channels reduces aperture-time and trigger-path variation that otherwise develops when each channel uses an independent clock source. The device supports output-clock relationships derived from one input and operates up to 160 MHz. Place the package centrally relative to the converters, maintain a continuous return path beneath clock traces, and confirm converter clock-input limits before committing the system timing architecture.
Disebarkan
Test and Measurement Instrumentation
The ICS527R-01 is appropriate for instrumentation that must feed multiple acquisition, modulation, or trigger sections from a common clock source. A single configurable clock slicer can generate several related outputs, simplifying the architecture compared with a fanout buffer followed by separate ratio converters. Its 160 MHz operating frequency supports demanding laboratory and industrial test systems, while the 28-SSOP package simplifies board routing. For high-fanout or long-trace configurations, terminate unused outputs according to the manufacturer guidance and verify crosstalk, edge rate, and output-to-output timing during prototype validation.
Disebarkan
Industrial Control and Automation Modules
The ICS527R-01 can organize the timing reference for an industrial controller containing a processor, communications interface, and high-speed counter or data-conversion block. Deriving several clock relationships from one input reduces duplicated oscillators and keeps the design centered on a common reference. Its 160 MHz maximum frequency offers margin for digital control subsystems, although the selected supply and temperature limits determine the usable operating range. Follow the reference circuit and decoupling arrangement in the Renesas 527-01 datasheet, and isolate clock routing from relay, motor, and power-converter switching nodes.
Disebarkan
Network and Interface Timing
The ICS527R-01 can serve as the central clock-distribution element in interface cards where Ethernet, serial, storage, and fabric sections require a shared timing relationship. Using one clock slicer instead of separate fanout and conversion components can improve source-to-load consistency and simplify control of the clock tree. The device's 160 MHz capability and 28-SSOP footprint suit compact interface hardware. Check the data-sheet input threshold, output loading, and supply conditions against the actual link rates, and keep sensitive clock traces away from connector returns and high-speed data lanes.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ICS527R-01 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | ICS527R-01I | ICS527R-02T | ICS527R-01T | ICS527-01 | 527R-01LF |
|---|---|---|---|---|---|---|
| Package | 28-SSOP | 28-SSOP | 28-SSOP | 28-SSOP | 28-SSOP | 28-SSOP |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Integrated Device Technology |
| Device Type | Zero-delay clock buffer and clock slicer | Zero-delay clock buffer and clock slicer | Zero-delay clock buffer and clock slicer | Zero-delay clock buffer and clock slicer | User-configurable zero-delay clock buffer | Zero-delay clock buffer |
| Maximum Clock Frequency | 160 MHz | 160 MHz | 160 MHz | 160 MHz | 160 MHz | 160 MHz |
| Package Width | 3.90 mm (0.154 in) | 3.90 mm (0.154 in) | 3.90 mm (0.154 in) | 3.90 mm (0.154 in) | 3.90 mm (0.154 in) | 3.90 mm (0.154 in) |
| Pin Count | 28 pins | 28 pins | 28 pins | 28 pins | 28 pins | 28 pins |
Penyeberangsung Jelas
- Combines zero-delay fanout with configurable clock relationships (vs527R-01LF)
- Same 160 MHz clocking class as the closest Renesas variants (vsICS527R-01I)
- Configurable output relationship rather than a fixed-only clock stage (vsICS527R-02T)
- Supports a 160 MHz reference in a compact 28-SSOP footprint (vsICS527-01)
Catatan Desain
Route the source clock and all output nets as short, continuous traces, and provide a continuous return path beneath each clock route. The ICS527R-01 operates up to 160 MHz, so trace loss, capacitance, and crosstalk can affect edge rate even when the nominal frequency is within specification. Keep the clock paths away from switching-node returns and connector fields, and verify output loading against the electrical-characteristics table in the Renesas 527-01 datasheet.
Follow the manufacturer reference circuit for input and output decoupling, including the component type, placement distance, and connection to the appropriate supply pins. Place the decoupling network close to the package rather than at the power entry point so high-frequency current loops remain compact. Verify that the selected control-input states are valid during reset and power sequencing, because incorrect configuration states can leave the clock outputs in an unintended condition.
Do not treat every 28-SSOP clock-slicer ordering code as electrically identical. Confirm the supported output ratios, control-pin functions, supply limits, and temperature grade in the 527-01 datasheet before substituting ICS527R-01I, ICS527R-02T, ICS527R-01T, or the legacy 527R-01LF. A matching body outline alone does not guarantee identical timing, level, or configuration behavior.
Estimate the device's supply-current contribution at the intended clock frequency, output loading, and supply voltage before finalizing power-budget and thermal calculations. Add the calculated device dissipation to the regulator and copper-area budget for the board. Keep unused outputs in the state recommended by the manufacturer and avoid tying an active output to another output, which can cause excess current and unpredictable timing behavior.
Maklumat Kesediaan
Compliance declarations are not stated in the product information used for this record. Confirm RoHS, REACH, halogen-free, and conflict-minerals status with Renesas for the exact ordering code and current material declaration.