Renesas Electronics

ICS527R-04 - 160MHz CMOS PLL Clock Driver | Renesas

Teilenummer: ICS527R-04 ✓ Aktiv
SSOP-28 Package 160 MHz Speed
MOQ: 1 |

ICS527R-04 Übersicht

The Renesas Electronics ICS527R-04 is a user-configurable PECL-input, zero-delay-buffer clock driver based on a CMOS phase-locked loop, with a maximum operating frequency of 160 MHz. The device is associated with a 28-pin SSOP package and operates across a commercial temperature range of 0°C to 70°C. It belongs to the clock and timing hierarchy: PLL-based clock driver → clock buffer → clock and timing IC → semiconductor.

A PLL-based clock driver is an integrated timing device that locks an output clock to a reference and distributes that clock through configurable logic paths. The user-configurable architecture allows a design to select the division ratio and output behavior required by the receiving circuitry. In a zero-delay-buffer configuration, the device minimizes propagation delay between the driving source and downstream clock loads while preserving a defined relationship between input and output edges.

The ICS527R-04 supports a maximum frequency of 160 MHz, making it applicable to clock-generation and distribution systems operating below that limit. Its PECL input interface is intended for systems using positive emitter-coupled logic clock sources. The CMOS PLL implementation and configurable outputs provide the basis for translating a reference clock into multiple synchronized signals needed by digital logic, communications equipment, and test systems.

A principal design consideration is the relationship between input frequency, selected feedback ratio, output division, and the resulting operating point. The manufacturer datasheet should be used to confirm supported configuration combinations, output-edge relationships, supply requirements, and the treatment of unused inputs or outputs before the device is placed into production. PCB implementation must preserve the pin assignments and decoupling recommendations associated with the SSOP-28 footprint.

Typical uses include PECL-to-logic clock distribution, frequency multiplication or division within a PLL architecture, and generation of related clocks for digital subsystems. The device can also be used in communications equipment and test platforms where multiple outputs must remain synchronized. Its 0°C to 70°C commercial operating range is appropriate for indoor commercial and industrial equipment that does not require extended-temperature operation.

Engineers should verify absolute maximum ratings, recommended operating conditions, AC timing, output-drive capability, and power consumption against the manufacturer datasheet before final schematic or layout release. The SSOP-28 package provides a high pin count relative to its body size, so careful routing and stable supply decoupling are particularly important.

This page organizes the documented operating limits, package information, sourcing questions, and design considerations for ICS527R-04. It also distinguishes verified device facts from parameters that still require confirmation before a replacement or new design can be released.

Drop-in-Alternativen für ICS527R-04 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ICS527R-04 (gleiche Bauform und Footprint) – abweichend in Package.

Renesas Electronics
Package: 28-SSOP (0.154 inch, 3.90 mm width)
Vergleichen mit ICS527R-04 →

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

ICS527R-04 Technische Daten

Device Type PLL-based clock driver
Maximum Frequency 160 MHz
Input Interface User-configurable PECL
Output Function Zero-delay buffer
Internal Technology CMOS PLL
Gehäuse SSOP-28
Montageart Surface mount
Betriebstemperatur 0°C to 70°C
Reel Quantity 2,500 units
AEC-Q100 Qualification Not applicable

ICS527R-04 ssop-28 Pinbelegungsleitfaden

Pinbelegung für ICS527R-04 (ssop-28-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für ICS527R-04 im ssop-28-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ICS527R-04.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ICS527R-04 ist geeignet für 6 Anwendungs: PECL Clock Distribution, Frequency Multiplication and Division, Telecommunications Clocking, Digital Test Equipment, Industrial Control Logic, Synchronous Data Processing.

🌐

PECL Clock Distribution

The ICS527R-04 fits PECL clock-distribution designs that require more than simple edge distribution because it combines a user-configurable PECL input with PLL-based clock generation and zero-delay-buffer functionality. Its documented maximum frequency of 160 MHz provides a defined operating ceiling for downstream logic. Use the input termination and configuration network specified by the manufacturer, then route each supported output according to the device's pin and timing tables. The zero-delay architecture is particularly useful when the design must retain a close relationship between the reference source and distributed clocks, although final timing margin must be evaluated at the receiver rather than inferred only from the device name.

🔧

Frequency Multiplication and Division

The ICS527R-04 can serve as the central timing element in systems that require a reference clock to be multiplied, divided, or redistributed through a PLL-based architecture. Its maximum operating frequency of 160 MHz sets the principal design boundary, while the user-configurable nature of the device supports several clock-plan options. Engineers should derive the feedback and output settings from the manufacturer configuration table, verify that the requested output remains inside the PLL's valid operating range, and include startup and lock behavior in system timing analysis. The CMOS PLL implementation makes this device appropriate for digital subsystems requiring deterministic clock relationships.

🌐

Telecommunications Clocking

ICS527R-04 is applicable to telecommunications equipment that accepts a PECL clock reference and needs configurable, synchronized clock outputs. The device's documented 160 MHz maximum frequency accommodates clocking requirements below that limit, and its PLL-based architecture can support frequency relationships that a simple fanout buffer cannot provide. Design the reference input according to the manufacturer interface requirements and keep each output's loading within its specified fanout and timing limits. Because SSOP-28 routing density can affect return paths and coupling, use a solid ground plane and place decoupling and termination close to the relevant pins.

🖥️

Digital Test Equipment

The configurable PLL and zero-delay-buffer behavior of the ICS527R-04 can support clock generation inside digital test and measurement systems. Such equipment often needs several related clocks for acquisition, processing, conversion, or data-transfer blocks, and a single user-configurable device can simplify the clock-plan architecture. The 160 MHz maximum frequency is suitable for systems whose internal clock targets remain below that value. Engineers should characterize setup, hold, jitter, and output-skew requirements for each timing path and reserve configuration control so operating modes can be changed safely without violating the manufacturer's PLL operating constraints.

🏭

Industrial Control Logic

ICS527R-04 can be used in industrial control logic when a controller or communication block requires a PECL reference and coordinated clock outputs. Its commercial 0°C to 70°C operating range suits indoor equipment whose internal ambient remains within that interval. The PLL-based implementation supports generated clock relationships, while the zero-delay-buffer function can help preserve source-to-destination edge alignment in suitably designed systems. The design must account for supply tolerances, temperature-dependent timing, startup behavior, and the configuration state of unused outputs. Firmware or control logic should keep the clock configuration within the valid combinations listed by the manufacturer.

🖥️

Synchronous Data Processing

The ICS527R-04 is suitable for clocking synchronous processing pipelines where several logic domains must operate from related reference signals. Its user-configurable output behavior allows the clock architecture to be tailored more precisely than a fixed fanout device, while the documented 160 MHz ceiling defines the maximum supported operating point. Place the device close to the clock-consuming circuitry, provide low-impedance supply and ground connections, and use the pin-description table to terminate unused outputs as directed. System-level timing analysis should include worst-case PLL variation, output skew, loading, and board delay rather than relying only on nominal propagation-delay figures.

Zusammenfassung der empfohlenen Produkte

ICS527R-04T Temperature-range-qualified ordering variant identified for the same clock-driver family Verwendet in: PECL Clock Distribution, Frequency Multiplication and Division, Telecommunications Clocking, Digital Test Equipment, Industrial Control Logic, Synchronous Data Processing ICS527R-02ILF ICS527-series PLL clock-driver family member Verwendet in: PECL Clock Distribution, Telecommunications Clocking, Industrial Control Logic
What is the ICS527R-04?
The ICS527R-04 is a user-configurable PECL-input, zero-delay-buffer clock driver based on a CMOS PLL. The documented maximum operating frequency is 160 MHz, and the device is available in an SSOP-28 surface-mount package. According to the ICS527R-04 datasheet listing, it is intended for CMOS applications, with the internal PLL providing clock multiplication, division, and distribution functions.
What is the maximum frequency of ICS527R-04?
The maximum frequency of the ICS527R-04 is 160 MHz. This value comes from the ICS527R-04T datasheet listing, which describes the device as a CMOS PLL clock driver in an SSOP package. The operating frequency of an individual system must remain below this maximum after accounting for PLL configuration, output loading, temperature, and the timing margins required by the downstream logic.
What type of clock driver is ICS527R-04?
The ICS527R-04 is a PLL-based clock driver with a user-configurable PECL input and zero-delay-buffer functionality. It converts a reference clock into synchronized output clocks according to its programmed configuration. The manufacturer datasheet identifies CMOS PLL technology, a 160 MHz maximum frequency, and an SSOP-28 package as the principal device characteristics.
Where can I download the ICS527R-04 datasheet PDF?
The ICS527R-04 datasheet PDF can be accessed through the datasheet listing at alldatasheet.com. The listing identifies the ICS527R-04 as a clock slicer with user-configurable PECL input and zero-delay-buffer operation. Before releasing a design, compare the document revision and ordering information against the exact manufacturer part number and package suffix being assembled.
Where can I find the ICS527R-04 pinout?
The ICS527R-04 pinout is published in the manufacturer pin-description table and package drawing associated with the device datasheet. The device is identified as an SSOP-28 package. Assign PCB nets directly from that table, including every power, ground, clock input, configuration, and output connection, rather than inferring unused-pin treatment from another member of the clock-driver family.
What is the operating temperature range of ICS527R-04?
The ICS527R-04 operates from 0°C to 70°C. The operating-temperature statement appears in the ICS527R-04T datasheet listing and identifies the device as intended for commercial-temperature operation. If the surrounding enclosure can exceed 70°C or fall below 0°C, select a part explicitly rated for that environment instead of assuming that the clock timing remains suitable.
Is ICS527R-04 suitable for PECL clock distribution?
Yes, the ICS527R-04 is suitable for systems that use a PECL input because the device provides a user-configurable PECL input interface and CMOS PLL-based clock generation. The source interface, output logic levels, termination network, supply voltage, and timing limits must be checked together in the manufacturer datasheet before implementation.
How does ICS527R-04 compare with a conventional clock buffer?
The ICS527R-04 combines PLL-based clock generation with zero-delay-buffer and user-configurable functions, rather than operating only as a fixed-ratio buffer. Its documented maximum frequency is 160 MHz and its interface includes a configurable PECL input. A conventional buffer may be simpler when no feedback, multiplication, division, or configurable output logic is required.
When should I choose ICS527R-04 for a clocking design?
Choose ICS527R-04 when the design needs a PECL reference input, PLL-based clock relationships, configurable logic behavior, and operation up to 160 MHz in an SSOP-28 package. It is less attractive when a simple fixed-frequency fanout buffer would meet the requirement with fewer configuration controls and less timing analysis. Confirm output count, supply requirements, jitter, and exact pin functions in the datasheet.
Can another IC replace ICS527R-04 without PCB changes?
A drop-in replacement must use the same SSOP-28 footprint and match the clock inputs, configuration pins, output functions, supply requirements, and timing behavior. The available cross-reference information does not establish that any alternative candidate is pin-to-pin and parameterically compatible with ICS527R-04. Treat a replacement as unapproved until its manufacturer datasheet and timing data have been checked directly.
What is the best drop-in replacement for ICS527R-04?
No confirmed drop-in replacement for ICS527R-04 is established by the available manufacturer and distributor information. A valid substitute must preserve the SSOP-28 pinout and provide equivalent PECL input, PLL configuration, output behavior, supply, and timing characteristics. Use the manufacturer cross-reference resources to locate candidates, then verify each candidate against the ICS527R-04 datasheet before production use.
What can replace ICS527R-04?
A suitable replacement for ICS527R-04 must be a pin-compatible SSOP-28 clock driver or a board-level substitute supported by complete timing and electrical data. No cross-brand equivalent in the available results is confirmed as pin-to-pin compatible with this device. Do not substitute solely on a shared family name or maximum-frequency figure; verify configuration pins, output count, logic levels, supply voltage, and AC timing.
Is ICS527R-04 the same as ICS527R-02ILF?
No. The ICS527R-02ILF belongs to the same ICS527 clock-driver family, but its part number identifies a different configuration. The available comparison information explicitly notes that the main parameters and circuit structure differ and that circuit modification may be required. It therefore must not be treated as an automatic drop-in replacement for the ICS527R-04.
Where can I buy ICS527R-04 online?
The ICS527R-04 can be requested through the Request a Quote form on this XAIPART page. Stock status and lead time should be confirmed for the exact package and ordering suffix at the time of quotation. The Request a Quote form is the appropriate route for current availability, minimum order quantity, and supply information without relying on a static listing price.
What is the price and lead time for ICS527R-04?
Use the Request a Quote form on this XAIPART page for the current price, stock position, and lead time of ICS527R-04. The available product information does not print a qualifying quantity-break price, so a static price should not be quoted from it. Include the exact ordering suffix, target quantity, and required delivery date in the request to obtain an actionable quotation.

Technische Referenzdaten für ICS527R-04 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose ICS527R-04 when the system needs a user-configurable PECL input, PLL-based clock relationships, zero-delay-buffer behavior, and operation up to 160 MHz in an SSOP-28 package. It is particularly suitable for communication, test-equipment, industrial-control, and synchronous-processing systems that require more control than a fixed fanout buffer provides. Select it only after confirming the supply voltage, output count, configuration options, AC timing, jitter, and PLL operating ranges in the manufacturer datasheet. Do not substitute ICS527R-02ILF solely because it belongs to the same family; the available comparison information identifies different parameters and possible circuit changes. If the design can be met with a simple non-PLL clock buffer, that simpler device may reduce configuration effort and design risk. For any proposed replacement, require the same SSOP-28 pinout and equivalent electrical and timing behavior before approving a PCB change.

Vergleich mit Alternativen

Parameter Dieses Produkt
Brand Renesas Electronics
Package SSOP-28
Device Type PLL-based clock driver
Maximum Frequency 160 MHz
Input Interface User-configurable PECL
Output Function Zero-delay buffer
Internal Technology CMOS PLL
Operating Temperature 0°C to 70°C

Wichtigste Unterscheidungsmerkmale

  • Combines PECL input, PLL generation, and zero-delay buffering (vs. ICS527R-02ILF)
  • Documented operating ceiling (vs. ICS527R-02ILF)
  • Commercial-temperature operating range (vs. ICS527R-02ILF)

Designhinweise

Use the manufacturer SSOP-28 pin-description table when assigning every power, ground, input, output, and configuration connection. Place the PLL reference input and clock outputs on short, direct routes, and provide a continuous ground plane beneath the device. The 28-pin SSOP footprint has closely spaced leads, so fanout and escape routing should be planned before finalizing adjacent component placement.

Place the manufacturer's recommended supply-decoupling network close to the corresponding power and ground pins, and keep clock-input return paths away from switching nodes. Confirm the supported supply range, bypass capacitance, and input termination from the datasheet before schematic release. Do not infer PECL termination values from another ICS527 configuration because interface requirements may differ.

Verify the complete feedback ratio, division ratio, output configuration, and target frequency as one valid PLL operating combination. A requested output below the 160 MHz device maximum can still be invalid if it violates the PLL's permitted input or feedback range. Also check startup, lock, unused-pin, and unused-output requirements in the manufacturer documentation before treating configuration-control pins as ordinary static logic.

Base output routing, fanout, and termination on the clock's rise and fall requirements rather than nominal operating frequency alone. Use short paths to minimize board-induced skew, maintain a continuous reference plane, and keep unused outputs in the manufacturer-recommended state. Validate setup time, hold time, and jitter at the receiving device because a valid source-edge relationship does not guarantee adequate margin at the end of the trace.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The documented 0°C to 70°C operating range is a temperature rating, not evidence of automotive qualification.

Daten verifiziert am: 2026-11-16 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

ICS527R-04 datasheet ICS527R-04 pinout ICS527R-04 datasheet pdf ICS527R-04 SSOP-28 pinout ICS527R-04 160MHz PLL ICS527R-04 PECL clock driver ICS527R-04 equivalent ICS527R-04 replacement ICS527R-04 cross reference ICS527R-04 vs ICS527R-02ILF ICS527R-04 application circuit ICS527R-04 price ICS527R-04 stock Renesas ICS527R-04

Verwandte Bauteile & Begriffe

Renesas Electronics Integrated Device Technology ICS527R-04 ICS527R-04T ICS527R-02ILF PLL-based clock driver zero-delay buffer clock buffer clock and timing IC phase-locked loop CMOS PLL PECL SSOP-28 SSOP package family surface-mount package 160 MHz clock user-configurable clock clock distribution clock multiplication clock division industrial control logic telecommunications equipment test equipment output skew timing jitter
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen