Renesas Electronics

ICS557G-06 - 1:4 HCSL Clock Buffer | Renesas Electronics

Teilenummer: ICS557G-06 ✓ Aktiv
20-pin TSSOP Package 200 MHz Speed
MOQ: 1 |

ICS557G-06 Übersicht

Renesas Electronics ICS557G-06 is a differential PCI Express clock fanout and multiplexer IC with a 1:4 output ratio, 200 MHz listed operating frequency, HCSL or LVDS inputs, and HCSL or LVDS outputs. The device is packaged in a 20-pin TSSOP package and is intended for systems requiring one selected differential clock input to be distributed across multiple outputs.

A clock buffer or fanout buffer is a timing IC that reproduces an incoming clock signal across multiple outputs. Clock multiplexers add input selection, allowing a system to choose between clock sources while maintaining consistent output timing. The ICS557G-06 belongs to the clock buffer and clock multiplexer hierarchy, which falls under clock and timing ICs used in PCI Express cards, servers, industrial controllers, and other high-speed digital systems.

The principal features of the ICS557G-06 include two differential input pairs, selection of one input pair, four differential output pairs, and support for HCSL and LVDS signal levels. Its one-to-four fanout architecture allows a selected source clock to reach several destinations while reducing the loading that would otherwise be imposed directly on the clock source. The 200 MHz frequency specification identifies the device's stated operating point for design planning.

The ICS557G-06 does not use an internal PLL according to the component classification. Instead, it functions as a differential clock mux and fanout buffer: one of two input pairs is selected, and the selected clock is distributed through four differential output pairs. This architecture preserves the role of the original clock source while providing controlled fanout and selection for multi-output clock networks.

Typical uses include PCI Express clock distribution, server backplane clock routing, industrial data-acquisition systems, network interface equipment, and test-and-measurement platforms. In a PCI Express design, the device can select the appropriate differential clock source and distribute it to multiple downstream circuits, reducing the fanout burden on the source and helping maintain consistent clock topology.

Designers should verify differential impedance, output pair routing, return-path continuity, and input/output logic-level compatibility in the target system. Differential clock traces should be routed as a length-matched pair on a controlled-impedance board, with nearby high-speed or switching nodes kept away from the clock network. Decoupling, grounding, and unused-pin handling should follow the pin-description and layout guidance in the manufacturer datasheet.

This page organizes the device function, interface characteristics, package details, application guidance, drop-in replacement information, and engineering design notes into one engineering-focused reference for evaluating the ICS557G-06 in PCI Express clock architectures.

Drop-in-Alternativen für ICS557G-06 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

557G-06LF

✅ Drop-In
📦 20-TSSOP
Same 20-TSSOP package and terminal arrangement; the comparison reports consistent functional characteristics with no circuit modification required

📋 Referenzalternative (nicht im Katalog)

ICS557G-06 Technische Daten

Device Type PCI Express fanout buffer and multiplexer IC
Product Function One-to-four differential HCSL clock buffer
Primary Application PCI Express clock distribution
Operating Frequency 200 MHz
Input Signal Type HCSL or LVDS differential
Output Signal Type HCSL or LVDS differential
Number of Circuits 1 circuit
Input-to-Output Ratio 1:4
Differential Input Pairs 2 pairs
Differential Output Pairs 4 pairs
PLL No PLL
Gehäuse 20-pin TSSOP
Montageart Surface mount

ICS557G-06 20-pin tssop Pinbelegungsleitfaden

Pinbelegung für ICS557G-06 (20-pin tssop-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für ICS557G-06 im 20-pin tssop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für ICS557G-06.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

ICS557G-06 ist geeignet für 6 Anwendungs: PCI Express Clock Distribution, Server Backplane Clock Routing, Industrial Data-Acquisition Systems, Network Interface Equipment, Test and Measurement Platforms, High-Speed Digital Backplanes.

🖥️

PCI Express Clock Distribution

The ICS557G-06 fits PCI Express clock-distribution networks that require one selected differential source to feed four destinations. It selects between two HCSL differential input pairs and provides four HCSL or LVDS differential output pairs, creating a controlled 1:4 fanout instead of connecting several loads directly to one source. According to the Renesas 557-06 datasheet, the device is specifically intended for PCI Express applications. Its 200 MHz operating-frequency classification and 20-pin TSSOP package make it a practical choice when the board requires differential clock selection rather than single-ended distribution. In implementation, preserve pair symmetry, maintain a continuous reference plane, and verify that every downstream receiver accepts the selected output level.

🖥️

Server Backplane Clock Routing

The ICS557G-06 can organize a server backplane clock distribution point where two differential clock candidates must be selected before reaching four downstream domains. Its two HCSL differential input pairs provide source selection, and the four HCSL or LVDS output pairs distribute the chosen clock with a 1:4 ratio. This architecture can reduce fanout demand on an upstream oscillator or buffer while keeping routing structured around a common device. At 200 MHz in the 20-pin TSSOP package, it is appropriate for backplanes where differential signaling and multiple routed destinations are required. Board designers should validate insertion loss, skew, receiver thresholds, and clock-source stability across voltage and temperature conditions in the final system.

🏭

Industrial Data-Acquisition Systems

The ICS557G-06 is suitable for industrial acquisition equipment that must distribute a common differential clock to multiple converters, processing sections, or communication links. The two differential input pairs allow one of two clock sources to be selected, while the four differential output pairs provide a 1:4 distribution point. HCSL and LVDS support gives the device flexibility for systems using those differential clock conventions. Its listed 200 MHz operating frequency can cover moderate-rate acquisition and control clocking requirements, provided the complete signal chain meets the specified limits. Keep sensitive routing away from switching nodes, use matched pair geometry, and check converter acquisition timing against the selected clock path.

🌐

Network Interface Equipment

The ICS557G-06 can serve as a centralized differential clock-routing element in network interface equipment that requires selectable clock sources and several downstream destinations. Its 1:4 differential fanout provides a structured way to feed multiple interface blocks from one selected pair, while HCSL or LVDS outputs support common high-speed board signaling approaches. The 20-pin TSSOP footprint is suitable for compact interface cards, and the device is classified for operation at 200 MHz. In a practical design, confirm that the selected source meets each receiver's timing requirements and that output pair routing preserves adequate spacing from data lines. Validate signal integrity with the actual connectors, cables, and enclosure structures that can affect the clock distribution.

🔧

Test and Measurement Platforms

The ICS557G-06 fits test and measurement platforms where several subsystems must receive a selected differential reference clock. Two HCSL input pairs allow selection between reference sources, and four differential output pairs distribute the chosen clock to acquisition, conversion, or trigger-processing sections. The device's 200 MHz operating-frequency classification and support for HCSL or LVDS outputs provide useful flexibility for medium-speed instrumentation. The 20-pin TSSOP package also supports compact, multi-channel implementations where board area is constrained. Engineers should evaluate clock-to-data timing margins, pair-to-pair skew, grounding, and connector transitions, and should use the manufacturer datasheet to confirm the electrical limits that apply to the complete test system.

🌐

High-Speed Digital Backplanes

The ICS557G-06 is applicable to high-speed digital backplanes that need controlled differential clock fanout rather than a branched or daisy-chained clock path. Selecting one of two HCSL input pairs and driving four differential output pairs creates a defined distribution point that can simplify topology across a multi-section board. The 1:4 ratio and 200 MHz operating-frequency classification align with moderate-speed clock distribution, while HCSL and LVDS interfaces allow compatible signaling choices. The 20-pin TSSOP package supports conventional surface-mount assembly. Layout verification should include differential impedance, equal pair lengths where timing requires it, uninterrupted return paths, and adequate spacing from high-current or high-speed data paths to reduce coupling into the clock network.

Zusammenfassung der empfohlenen Produkte

ICS557G-06 Renesas Electronics Verwendet in: PCI Express Clock Distribution, Server Backplane Clock Routing, Industrial Data-Acquisition Systems, Network Interface Equipment, Test and Measurement Platforms, High-Speed Digital Backplanes 557G-06LF Package-compatible clock-device alternative Verwendet in: PCI Express Clock Distribution, Server Backplane Clock Routing, Industrial Data-Acquisition Systems, Network Interface Equipment, Test and Measurement Platforms, High-Speed Digital Backplanes
What is the ICS557G-06?
The ICS557G-06 is a one-to-four differential clock fanout buffer and multiplexer designed for PCI Express clock distribution. According to the Renesas 557-06 datasheet, it selects one of two differential HCSL input pairs and fans the selected clock out through four differential HCSL or LVDS output pairs. The device is identified in the 20-pin TSSOP package and has a listed operating frequency of 200 MHz.
What are the key specifications of ICS557G-06 that engineers should know?
The ICS557G-06 provides a 1:4 clock fanout ratio, two differential input pairs, four differential output pairs, HCSL or LVDS input support, and HCSL or LVDS output support. According to the Renesas 557-06 datasheet, it operates without a PLL. The distributor classification also identifies a 200 MHz operating frequency and a 20-pin TSSOP package, making those four functional facts the primary checks for initial design screening.
How many clock inputs and outputs does ICS557G-06 have?
The ICS557G-06 has two differential HCSL input pairs and four differential HCSL or LVDS output pairs. The input selector chooses one of the two input pairs, while the output section distributes the selected clock across four differential pairs. This 2-to-4 multiplexer and fanout arrangement is explicitly described by Renesas in the 557-06 datasheet and summarized in the device specification tables.
Does ICS557G-06 contain a PLL?
No. The ICS557G-06 is classified as a fanout buffer and multiplexer with no PLL. According to the Renesas 557-06 datasheet, the device selects one of two differential HCSL input pairs and fans it out to four differential HCSL or LVDS outputs. This makes it suitable for clock distribution where the source frequency is already established and regeneration is not required.
Where can I download the ICS557G-06 datasheet PDF?
The ICS557G-06 datasheet is available from Renesas Electronics on the official 557-06 datasheet page. That document identifies the ICS557-06 family as a two-to-four differential clock multiplexer for PCI Express applications and describes the input selection and four differential output stages. Use the manufacturer document for the authoritative pin description, electrical limits, and application guidance.
Where can I find the ICS557G-06 pinout?
The ICS557G-06 uses a 20-pin TSSOP package, and its authoritative pin assignment should be taken from the pin-description table in the Renesas 557-06 datasheet. Use that table when assigning differential clock inputs, differential outputs, control pins, supplies, and grounds. The manufacturer document is the appropriate reference for production layout because signal-pair and return-path assignments must match the exact device configuration.
What is the best drop-in replacement for ICS557G-06?
The 557G-06LF is the verified drop-in candidate identified for the ICS557G-06. The comparison data describes it as a 20-TSSOP clock driver with matching terminals, package, and functional characteristics, allowing replacement without modifying the existing circuit. Before production substitution, confirm pin assignment, supported input frequency, supply requirements, output performance, and lifecycle requirements against the current manufacturer datasheets.
Can 557G-06LF replace ICS557G-06?
Yes, the 557G-06LF can replace the ICS557G-06 as a package-compatible candidate because both are identified as 20-pin TSSOP clock devices with consistent terminals and closely matching functions. The replacement comparison reports complete functional and terminal compatibility. A production release should still include schematic review, timing validation, and a review of any quality, temperature, or lifecycle requirements specific to the equipment being supported.
What cross-brand equivalent is available for ICS557G-06?
No cross-brand drop-in equivalent for the ICS557G-06 is confirmed by the available cross-reference records. The verified candidate is the Renesas 557G-06LF, so it does not provide a cross-brand qualification. Because the ICS557G-06 uses a 20-pin TSSOP package and combines two differential inputs with four differential outputs, any cross-brand candidate must be checked for exact pin compatibility, 1:4 fanout, differential I/O levels, and equivalent timing performance.
When should I choose ICS557G-06 over another clock buffer?
Choose the ICS557G-06 when the design needs one selected differential clock source distributed to four differential destinations in a 20-pin TSSOP package. It is especially appropriate for PCI Express clock routing that uses two HCSL input pairs and HCSL or LVDS outputs. Do not select it for a design requiring an internal PLL, single-ended clock distribution, or a package other than 20-pin TSSOP.
Is ICS557G-06 suitable for a PCI Express clock network?
Yes, the ICS557G-06 is specifically designed for PCI Express clock distribution. According to the Renesas 557-06 datasheet, it selects one of two differential HCSL input pairs and generates four differential HCSL or LVDS output pairs. Its 1:4 fanout architecture suits systems that need several clock destinations without loading the selected source clock as heavily as a direct multi-load connection would.
What is the difference between ICS557G-06 and 557G-06LF?
The available comparison describes the ICS557G-06 and 557G-06LF as functionally consistent and terminal-compatible 20-TSSOP clock devices, with no circuit modification required for replacement. The principal visible distinction is the ordering code: one retains the ICS557G-06 identifier, while the other uses 557G-06LF. Confirm current electrical limits, temperature range, and qualification status before approving either part for a new design.
How should the ICS557G-06 be used in a differential clock design?
Use the ICS557G-06 as a two-input, four-output differential clock selector and fanout stage. Route each selected differential source as a controlled-impedance pair, connect the four destination pairs to the appropriate loads, and keep the return path continuous under each clock trace. The implementation should follow the manufacturer layout guidance and verify differential levels and timing at the actual receiver endpoints.
Where can I buy ICS557G-06 online?
Use the Request a Quote form on this page to request the ICS557G-06 from XAIPART. The form is the appropriate route for current availability, lot-related questions, quantity requirements, and order handling. Because the device is currently listed as a Renesas Electronics 20-pin TSSOP clock buffer, include the complete ICS557G-06 ordering code when submitting the request.
What is the price of ICS557G-06?
Current pricing for the ICS557G-06 is shown through the Request a Quote form on this page. The form allows quantity and purchase-order details to be included so the quote can reflect the requested configuration. The device is specified as a 200 MHz, 1:4 differential clock fanout and multiplexer in a 20-pin TSSOP package; use that complete ordering code when requesting a quote.
What is the lead time and stock status of ICS557G-06?
Current stock and lead-time information for the ICS557G-06 should be requested through the Request a Quote form on this page. Include the required quantity, target date, and whether factory-sealed packaging or tube packing is acceptable. The identified device is the Renesas Electronics 20-pin TSSOP version, so no alternate package or suffix should be substituted without engineering approval.

Technische Referenzdaten für ICS557G-06 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the ICS557G-06 when the design requires a 20-pin TSSOP PCI Express clock multiplexer and fanout that selects one of two differential inputs and drives four differential outputs at a stated 200 MHz operating point. Its HCSL and LVDS interface support suits boards that already use compatible differential clock signaling. The 557G-06LF is the preferred documented replacement when an existing ICS557G-06 must be substituted without changing the circuit, because it shares the package and has matching terminal and functional characteristics. Before choosing it for a new design, verify its current operating frequency, electrical limits, temperature range, and qualification status. No cross-brand drop-in candidate is confirmed, so do not select another manufacturer solely because it is also described as a 1:4 HCSL buffer; exact pin assignment, differential levels, timing, and package dimensions must be demonstrated before substitution.

Vergleich mit Alternativen

Parameter Dieses Produkt 557G-06LF
Package 20-TSSOP 20-TSSOP - same
Brand Renesas Electronics Renesas Electronics
Device Type PCI Express fanout buffer and multiplexer IC Clock driver
Input-to-Output Ratio 1:4 1:4
Differential Input Pairs 2 pairs 2 inputs
Input Signal Type HCSL or LVDS differential HCSL or LVDS
Primary Application PCI Express clock distribution PCI Express clock distribution

Wichtigste Unterscheidungsmerkmale

  • One-to-four differential clock distribution (vs. 557G-06LF)
  • Selectable differential input architecture (vs. 557G-06LF)
  • PCI Express-oriented interface support (vs. 557G-06LF)

Designhinweise

Route every HCSL and LVDS connection as a controlled-impedance differential pair. Keep the two conductors of each pair geometrically coupled, maintain consistent spacing over the complete route, and provide a continuous return path beneath the pair. Avoid routing over plane splits, because a reference discontinuity can disturb the differential clock even when the apparent trace geometry appears correct.

Keep the four differential output paths away from switching nodes, high-current returns, and unrelated high-speed data lanes. If the four outputs reach different physical regions, use deliberate impedance and geometry matching rather than forcing identical routing through unrelated obstacles. This reduces coupling into the selected clock and helps preserve predictable behavior across the device's 1:4 fanout network.

Validate differential input thresholds, output levels, source-to-load timing, and clock-to-data margins at the receiver rather than only at the ICS557G-06 pins. Account for connector and trace losses in the complete clock path. Because the device selects one of two input pairs and fans it out to four output pairs, verify both branches and all destinations before production release.

Do not treat the ICS557G-06 as a PLL or frequency generator; the device has no PLL and redistributes an existing differential clock. Assign pins strictly from the manufacturer pin-description table, including power, ground, selection, and no-connect positions. Replacing it with the 557G-06LF can retain the 20-TSSOP footprint, but production approval should still confirm operating limits, lifecycle status, and quality requirements.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The 557-06 datasheet does not establish RoHS, REACH, halogen-free, conflict-minerals, or automotive qualification status in the available product records. AEC-Q100 is marked not applicable because no automotive qualification is identified for this clock and timing IC.

Daten verifiziert am: 2026-11-11 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

ICS557G-06 datasheet ICS557G-06 datasheet pdf ICS557G-06 pinout ICS557G-06 20-TSSOP ICS557G-06 HCSL clock buffer ICS557G-06 LVDS output ICS557G-06 PCI Express clock ICS557G-06 1:4 fanout ICS557G-06 equivalent ICS557G-06 replacement ICS557G-06 vs 557G-06LF ICS557G-06 price Renesas ICS557G-06 ICS557G-06 application circuit

Verwandte Bauteile & Begriffe

Renesas Electronics ICS557G-06 557G-06LF PCI Express PCIe clock buffer clock fanout buffer clock multiplexer differential clock HCSL LVDS 200 MHz 1:4 fanout 20-pin TSSOP TSSOP package surface-mount package clock and timing IC semiconductor differential pair routing controlled-impedance routing
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen