ICS557G-06 - 1:4 HCSL Clock Buffer | Renesas Electronics
MPN: ICS557G-06 ✓ Hoạt độngICS557G-06 Tóm tắt
A clock buffer or fanout buffer is a timing IC that reproduces an incoming clock signal across multiple outputs. Clock multiplexers add input selection, allowing a system to choose between clock sources while maintaining consistent output timing. The ICS557G-06 belongs to the clock buffer and clock multiplexer hierarchy, which falls under clock and timing ICs used in PCI Express cards, servers, industrial controllers, and other high-speed digital systems.
The principal features of the ICS557G-06 include two differential input pairs, selection of one input pair, four differential output pairs, and support for HCSL and LVDS signal levels. Its one-to-four fanout architecture allows a selected source clock to reach several destinations while reducing the loading that would otherwise be imposed directly on the clock source. The 200 MHz frequency specification identifies the device's stated operating point for design planning.
The ICS557G-06 does not use an internal PLL according to the component classification. Instead, it functions as a differential clock mux and fanout buffer: one of two input pairs is selected, and the selected clock is distributed through four differential output pairs. This architecture preserves the role of the original clock source while providing controlled fanout and selection for multi-output clock networks.
Typical uses include PCI Express clock distribution, server backplane clock routing, industrial data-acquisition systems, network interface equipment, and test-and-measurement platforms. In a PCI Express design, the device can select the appropriate differential clock source and distribute it to multiple downstream circuits, reducing the fanout burden on the source and helping maintain consistent clock topology.
Designers should verify differential impedance, output pair routing, return-path continuity, and input/output logic-level compatibility in the target system. Differential clock traces should be routed as a length-matched pair on a controlled-impedance board, with nearby high-speed or switching nodes kept away from the clock network. Decoupling, grounding, and unused-pin handling should follow the pin-description and layout guidance in the manufacturer datasheet.
This page organizes the device function, interface characteristics, package details, application guidance, drop-in replacement information, and engineering design notes into one engineering-focused reference for evaluating the ICS557G-06 in PCI Express clock architectures.
Bộ thay thế dễ dàng lắp đặt cho ICS557G-06 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
557G-06LF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ICS557G-06 Thông số kỹ thuật
| Device Type | PCI Express fanout buffer and multiplexer IC |
| Product Function | One-to-four differential HCSL clock buffer |
| Primary Application | PCI Express clock distribution |
| Operating Frequency | 200 MHz |
| Input Signal Type | HCSL or LVDS differential |
| Output Signal Type | HCSL or LVDS differential |
| Number of Circuits | 1 circuit |
| Input-to-Output Ratio | 1:4 |
| Differential Input Pairs | 2 pairs |
| Differential Output Pairs | 4 pairs |
| PLL | No PLL |
| Hộp | 20-pin TSSOP |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân ICS557G-06 20-pin tssop
Cấu hình chân cho ICS557G-06 (20-pin tssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho ICS557G-06.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ICS557G-06 phù hợp cho 6 Áp dụngs: PCI Express Clock Distribution, Server Backplane Clock Routing, Industrial Data-Acquisition Systems, Network Interface Equipment, Test and Measurement Platforms, High-Speed Digital Backplanes.
PCI Express Clock Distribution
The ICS557G-06 fits PCI Express clock-distribution networks that require one selected differential source to feed four destinations. It selects between two HCSL differential input pairs and provides four HCSL or LVDS differential output pairs, creating a controlled 1:4 fanout instead of connecting several loads directly to one source. According to the Renesas 557-06 datasheet, the device is specifically intended for PCI Express applications. Its 200 MHz operating-frequency classification and 20-pin TSSOP package make it a practical choice when the board requires differential clock selection rather than single-ended distribution. In implementation, preserve pair symmetry, maintain a continuous reference plane, and verify that every downstream receiver accepts the selected output level.
Được đề xuất
Server Backplane Clock Routing
The ICS557G-06 can organize a server backplane clock distribution point where two differential clock candidates must be selected before reaching four downstream domains. Its two HCSL differential input pairs provide source selection, and the four HCSL or LVDS output pairs distribute the chosen clock with a 1:4 ratio. This architecture can reduce fanout demand on an upstream oscillator or buffer while keeping routing structured around a common device. At 200 MHz in the 20-pin TSSOP package, it is appropriate for backplanes where differential signaling and multiple routed destinations are required. Board designers should validate insertion loss, skew, receiver thresholds, and clock-source stability across voltage and temperature conditions in the final system.
Được đề xuất
Industrial Data-Acquisition Systems
The ICS557G-06 is suitable for industrial acquisition equipment that must distribute a common differential clock to multiple converters, processing sections, or communication links. The two differential input pairs allow one of two clock sources to be selected, while the four differential output pairs provide a 1:4 distribution point. HCSL and LVDS support gives the device flexibility for systems using those differential clock conventions. Its listed 200 MHz operating frequency can cover moderate-rate acquisition and control clocking requirements, provided the complete signal chain meets the specified limits. Keep sensitive routing away from switching nodes, use matched pair geometry, and check converter acquisition timing against the selected clock path.
Được đề xuất
Network Interface Equipment
The ICS557G-06 can serve as a centralized differential clock-routing element in network interface equipment that requires selectable clock sources and several downstream destinations. Its 1:4 differential fanout provides a structured way to feed multiple interface blocks from one selected pair, while HCSL or LVDS outputs support common high-speed board signaling approaches. The 20-pin TSSOP footprint is suitable for compact interface cards, and the device is classified for operation at 200 MHz. In a practical design, confirm that the selected source meets each receiver's timing requirements and that output pair routing preserves adequate spacing from data lines. Validate signal integrity with the actual connectors, cables, and enclosure structures that can affect the clock distribution.
Được đề xuất
Test and Measurement Platforms
The ICS557G-06 fits test and measurement platforms where several subsystems must receive a selected differential reference clock. Two HCSL input pairs allow selection between reference sources, and four differential output pairs distribute the chosen clock to acquisition, conversion, or trigger-processing sections. The device's 200 MHz operating-frequency classification and support for HCSL or LVDS outputs provide useful flexibility for medium-speed instrumentation. The 20-pin TSSOP package also supports compact, multi-channel implementations where board area is constrained. Engineers should evaluate clock-to-data timing margins, pair-to-pair skew, grounding, and connector transitions, and should use the manufacturer datasheet to confirm the electrical limits that apply to the complete test system.
Được đề xuất
High-Speed Digital Backplanes
The ICS557G-06 is applicable to high-speed digital backplanes that need controlled differential clock fanout rather than a branched or daisy-chained clock path. Selecting one of two HCSL input pairs and driving four differential output pairs creates a defined distribution point that can simplify topology across a multi-section board. The 1:4 ratio and 200 MHz operating-frequency classification align with moderate-speed clock distribution, while HCSL and LVDS interfaces allow compatible signaling choices. The 20-pin TSSOP package supports conventional surface-mount assembly. Layout verification should include differential impedance, equal pair lengths where timing requires it, uninterrupted return paths, and adequate spacing from high-current or high-speed data paths to reduce coupling into the clock network.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ICS557G-06 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | 557G-06LF |
|---|---|---|
| Package | 20-TSSOP | 20-TSSOP - same |
| Brand | Renesas Electronics | Renesas Electronics |
| Device Type | PCI Express fanout buffer and multiplexer IC | Clock driver |
| Input-to-Output Ratio | 1:4 | 1:4 |
| Differential Input Pairs | 2 pairs | 2 inputs |
| Input Signal Type | HCSL or LVDS differential | HCSL or LVDS |
| Primary Application | PCI Express clock distribution | PCI Express clock distribution |
Bảo phân biệt quan trọng
- One-to-four differential clock distribution (vs557G-06LF)
- Selectable differential input architecture (vs557G-06LF)
- PCI Express-oriented interface support (vs557G-06LF)
Ghi chú thiết kế
Route every HCSL and LVDS connection as a controlled-impedance differential pair. Keep the two conductors of each pair geometrically coupled, maintain consistent spacing over the complete route, and provide a continuous return path beneath the pair. Avoid routing over plane splits, because a reference discontinuity can disturb the differential clock even when the apparent trace geometry appears correct.
Keep the four differential output paths away from switching nodes, high-current returns, and unrelated high-speed data lanes. If the four outputs reach different physical regions, use deliberate impedance and geometry matching rather than forcing identical routing through unrelated obstacles. This reduces coupling into the selected clock and helps preserve predictable behavior across the device's 1:4 fanout network.
Validate differential input thresholds, output levels, source-to-load timing, and clock-to-data margins at the receiver rather than only at the ICS557G-06 pins. Account for connector and trace losses in the complete clock path. Because the device selects one of two input pairs and fans it out to four output pairs, verify both branches and all destinations before production release.
Do not treat the ICS557G-06 as a PLL or frequency generator; the device has no PLL and redistributes an existing differential clock. Assign pins strictly from the manufacturer pin-description table, including power, ground, selection, and no-connect positions. Replacing it with the 557G-06LF can retain the 20-TSSOP footprint, but production approval should still confirm operating limits, lifecycle status, and quality requirements.
Thông tin tuân thủ
The 557-06 datasheet does not establish RoHS, REACH, halogen-free, conflict-minerals, or automotive qualification status in the available product records. AEC-Q100 is marked not applicable because no automotive qualification is identified for this clock and timing IC.