KSZ8041FTLI 10/100 Ethernet PHY | Microchip | 48-TQFP
Teilenummer: KSZ8041FTLI ✓ AktivKSZ8041FTLI Übersicht
An Ethernet PHY is the physical-layer component that converts digital MAC data into electrical signals for a twisted-pair cable and converts received signals back into digital data for the MAC controller. The KSZ8041 belongs to the Ethernet interface IC hierarchy, where the PHY works alongside a network controller, transformer, RJ45 connector, clock source, and magnetics. Unlike a switch or protocol controller, the KSZ8041 primarily handles analog signaling and line coding at the physical layer.
The KSZ8041 supports 10Base-T and 100Base-TX operation and provides MII, RMII, and SMII choices for connection to a host controller. These interface options allow the PHY to be used with controllers having different clocking and data arrangements. The manufacturer describes the device as using a unique mixed-signal design to extend signaling distance while reducing power consumption. HP Auto-MDI/MDI-X support simplifies direct connection to a network transformer without manual crossover configuration.
Typical uses include industrial Ethernet equipment, embedded control systems, access equipment, industrial controls, print systems, and embedded network gateways. The 48-TQFP package provides a conventional surface-mount footprint and exposes the PHY, clock, interface, power, and configuration functions needed for implementation in a multilayer PCB.
A successful design depends on correct supply decoupling, controlled clocking, proper MII/RMII/SMII connection, and layout that preserves the integrity of the analog receive and transmit paths. The PHY should be placed close to the Ethernet magnetics, with short, controlled-impedance traces for digital interface signals and carefully planned separation between noisy digital return currents and sensitive analog nodes. The manufacturer’s KSZ8041 documentation should be used for the final pin assignments, strap configuration, layout guidance, and interface timing.
Drop-in-Alternativen für KSZ8041FTLI – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit KSZ8041FTLI (gleiche Bauform und Footprint) – abweichend in Package, Device Type, Product Type, Supply Architecture, Supported Data Rates.
KSZ8041TLI-S
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →KSZ8041TLI
✅ Drop-In✓ Auf Lager
$3.6094 / Stück
Datenblatt ansehen →KSZ8041TL
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →KSZ8041FTL-TR
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →KSZ8041TL-TR
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →KSZ8041FTLI Technische Daten
| Product Type | 10/100 Ethernet physical-layer transceiver |
| Ethernet Speed Support | 10Base-T and 100Base-TX |
| Host Interface | MII, RMII, and SMII |
| Supply Architecture | Single supply |
| Crossover Support | HP Auto-MDI/MDI-X |
| Gehäuse | 48-pin TQFP |
| Package Dimensions | 7 mm x 7 mm |
| Betriebstemperatur | -40 C to +85 C |
| Montageart | Surface mount |
| Manufacturer | Microchip Technology |
| Port Count | 1 Ethernet port |
| Media Type | Twisted-pair copper |
KSZ8041FTLI 7 mm x 7 mm Pinbelegungsleitfaden
Pinbelegung für KSZ8041FTLI (7 mm x 7 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für KSZ8041FTLI.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
KSZ8041FTLI ist geeignet für 6 Anwendungs: Industrial Ethernet Control Systems, Embedded Network Gateways, Network Printers and Peripherals, Access and Terminal Equipment, Industrial Networking Equipment, Embedded Test and Measurement Products.
Industrial Ethernet Control Systems
The KSZ8041FTLI fits industrial controllers, PLC peripherals, and factory equipment that need a single 10/100 Ethernet port. Its MII, RMII, and SMII interfaces allow connection to different host-controller architectures, while the 48-TQFP package supports conventional surface-mount assembly. The PHY should be placed near the Ethernet transformer, with supply bypass and interface traces arranged according to the manufacturer’s layout guidance. Its -40 C to +85 C operating range is suitable for industrial-temperature equipment when the remaining system components also satisfy their own environmental limits.
Empfohlen
Embedded Network Gateways
The KSZ8041FTLI can provide the physical layer for embedded gateways that bridge a local processor or microcontroller to a 10/100 Ethernet network. RMII is useful when the host controller and PHY share a 50 MHz reference and require fewer interface signals than MII; SMII provides another documented interface option. The mixed-signal design is intended to extend signaling distance while reducing power consumption. Layout quality remains critical because long digital traces or an improperly grounded analog section can degrade receive performance even when nominal component specifications are met.
Empfohlen
Network Printers and Peripherals
The KSZ8041FTLI suits network-enabled printers, scanners, and print peripherals that require a 10Base-T or 100Base-TX physical layer. A single PHY supports copper networking without the complexity of a multiport Ethernet switch. The host processor can use the most suitable documented interface among MII, RMII, and SMII, reducing signal count where system constraints favor RMII. Keep the PHY close to the magnetics and route clock and data signals over a continuous reference plane to preserve signal integrity across the printed-circuit board.
Empfohlen
Access and Terminal Equipment
The KSZ8041FTLI is appropriate for single-port access terminals, point-of-sale equipment, and communication endpoints that connect an embedded controller to an Ethernet LAN. HP Auto-MDI/MDI-X operation simplifies link crossover handling for direct copper connections, while the single-supply architecture supports compact implementations. Exact supply voltage, reset behavior, strap configuration, and timing limits must be implemented from the manufacturer datasheet. Confirm that the selected suffix maintains the required operating-temperature grade and production status.
Empfohlen
Industrial Networking Equipment
The KSZ8041FTLI can serve as the Ethernet physical layer in monitors, bridges, embedded telemetry equipment, and single-port network interface modules. Its -40 C to +85 C operating range supports industrial-temperature designs, while the 48-TQFP package provides a practical path for automated assembly. Because Ethernet performance depends on the complete physical channel, use suitable network magnetics, controlled-impedance routing, a stable clock source, and careful separation between analog and digital return currents. Validate the complete channel rather than relying only on nominal PHY specifications.
Empfohlen
Embedded Test and Measurement Products
The KSZ8041FTLI can add Ethernet connectivity to embedded test instruments, analyzers, and measurement controllers that need a deterministic 10/100 copper interface. The available MII, RMII, and SMII host interfaces support different processor interfaces and clocking arrangements. When designing the PCB, place the PHY near the Ethernet transformer, provide low-impedance supply connections, and maintain short analog traces. The host interface should also be routed over a continuous ground plane with no plane splits beneath high-speed clock or data nets.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für KSZ8041FTLI – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | KSZ8041TLI-S | KSZ8041TLI | KSZ8041TL | KSZ8041FTL-TR |
|---|---|---|---|---|---|
| Package | 48-TQFP (7x7) | 48-TQFP (7x7) | 48-TQFP (7x7) | 48-TQFP (7x7) | 48-TQFP (7x7) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Ethernet Function | 10Base-T/100Base-TX physical-layer transceiver | 10Base-T/100Base-TX physical-layer transceiver | 10Base-T/100Base-TX physical-layer transceiver | 10Base-T/100Base-TX physical-layer transceiver | 10Base-T/100Base-TX physical-layer transceiver |
| Host Interfaces | MII, RMII, and SMII | MII, RMII, and SMII | MII, RMII, and SMII | MII, RMII, and SMII | MII, RMII, and SMII |
| Port Count | 1 | 1 | 1 | 1 | 1 |
| Supply Architecture | Single supply | Single supply | Single supply | Single supply | Single supply |
Wichtigste Unterscheidungsmerkmale
- Broader specified operating-temperature range than KSZ8041TL (vs. KSZ8041TL)
- Family-compatible 48-TQFP footprint (vs. KSZ8041TLI-S)
- Same core 10/100 PHY architecture as KSZ8041FTL-TR (vs. KSZ8041FTL-TR)
Designhinweise
Place the KSZ8041FTLI close to the Ethernet transformer and RJ45 connector. Keep the transmit and receive analog paths compact, avoid unnecessary stubs, and maintain a continuous ground reference beneath the PHY. Follow the manufacturer’s reference layout for component placement and copper geometry because small changes in the physical-layer channel can affect signal integrity and EMI performance.
Use the exact recommended supply voltage, bypass capacitance, and placement rules stated in the manufacturer datasheet. Place each specified capacitor adjacent to its associated power pin and minimize the loop area through the power and ground paths. Do not assign a nominal capacitor value without checking the datasheet’s ESR, voltage, temperature, and tolerance requirements.
Route MII, RMII, or SMII clocks and data over a continuous reference plane without split-plane crossings. Match trace lengths according to the selected interface timing requirements, and confirm the clock source, amplitude, and jitter expectations for the host controller. The RMII reference clock must be distributed cleanly to avoid data-to-clock skew that can cause intermittent framing errors.
Do not treat the suffix as interchangeable without checking its meaning. The KSZ8041TL comparison identifies a reduced 0 C to +70 C temperature range compared with -40 C to +85 C for KSZ8041FTLI. Before substitution, verify pin names, reset behavior, configuration straps, interface mode, operating-temperature grade, and qualification requirements against the manufacturer documentation.
Compliance-Informationen
Compliance attributes are not stated in the available manufacturer and distributor records. The comparison search references RoHS and REACH status for related KSZ8041 variants but does not provide a definitive status for KSZ8041FTLI.