Microchip Technology

KSZ8041FTLI 10/100 Ethernet PHY | Microchip | 48-TQFP

N.º da peça: KSZ8041FTLI ✓ Ativo
Single supply Vdss 48-pin TQFP Package 10Base-T and 100Base-TX Speed
MOQ: 1 |

KSZ8041FTLI Visão geral

The Microchip Technology KSZ8041FTLI is a single-port 10Base-T/100Base-TX Ethernet physical-layer transceiver with MII, RMII, and SMII interfaces, supplied in a 48-pin TQFP package. It is designed for embedded systems that require a 10/100 Ethernet copper connection and a conventional parallel MAC interface. The device uses a single-supply mixed-signal design to extend signaling distance while reducing power consumption, and supports HP Auto-MDI/MDI-X crossover operation.

An Ethernet PHY is the physical-layer component that converts digital MAC data into electrical signals for a twisted-pair cable and converts received signals back into digital data for the MAC controller. The KSZ8041 belongs to the Ethernet interface IC hierarchy, where the PHY works alongside a network controller, transformer, RJ45 connector, clock source, and magnetics. Unlike a switch or protocol controller, the KSZ8041 primarily handles analog signaling and line coding at the physical layer.

The KSZ8041 supports 10Base-T and 100Base-TX operation and provides MII, RMII, and SMII choices for connection to a host controller. These interface options allow the PHY to be used with controllers having different clocking and data arrangements. The manufacturer describes the device as using a unique mixed-signal design to extend signaling distance while reducing power consumption. HP Auto-MDI/MDI-X support simplifies direct connection to a network transformer without manual crossover configuration.

Typical uses include industrial Ethernet equipment, embedded control systems, access equipment, industrial controls, print systems, and embedded network gateways. The 48-TQFP package provides a conventional surface-mount footprint and exposes the PHY, clock, interface, power, and configuration functions needed for implementation in a multilayer PCB.

A successful design depends on correct supply decoupling, controlled clocking, proper MII/RMII/SMII connection, and layout that preserves the integrity of the analog receive and transmit paths. The PHY should be placed close to the Ethernet magnetics, with short, controlled-impedance traces for digital interface signals and carefully planned separation between noisy digital return currents and sensitive analog nodes. The manufacturer’s KSZ8041 documentation should be used for the final pin assignments, strap configuration, layout guidance, and interface timing.

Alternativas drop-in para KSZ8041FTLI — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com KSZ8041FTLI (mesmo formato e footprint) — diferindo em Package, Device Type, Product Type, Supply Architecture, Supported Data Rates.

Microchip Technology
Package: 48-TQFP, 7 x 7 mm
Comparar com KSZ8041FTLI →
Microchip Technology
Package: 48-TQFP (7 x 7 mm)
Device Type: Ethernet interface IC / physical-layer transceiver
Product Type: 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Comparar com KSZ8041FTLI →
Microchip Technology
Package: 48-TQFP, 7 mm x 7 mm
Device Type: 10/100BASE-TX Ethernet physical-layer transceiver
Comparar com KSZ8041FTLI →
Microchip Technology
Package: 48-TQFP (7 x 7 mm)
Device Type: Ethernet interface IC / physical-layer transceiver
Product Type: 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Comparar com KSZ8041FTLI →
Microchip Technology
Device Type: 10Base-T/100Base-TX Ethernet physical-layer transceiver
Supported Data Rates: 10 Mbps and 100 Mbps
Comparar com KSZ8041FTLI →
Microchip Technology
Package: 48-pin TQFP, 7 x 7 mm
Device Type: 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Supported Data Rates: 10 Mb/s and 100 Mb/s
Comparar com KSZ8041FTLI →

KSZ8041TLI-S

✅ Drop-In
Microchip Technology
📦 48-TQFP (7x7)
10BASE-T/100BASE-TX Ethernet physical-layer transceiver · 10 Mb/s and 100 Mb/s · Single supply · MII, RMII, and SMII · Supported · Low-power CMOS mixed-signal process · IEEE 802.3u · 1

Consulte o preço

Ver ficha técnica →

KSZ8041TLI

✅ Drop-In
Microchip Technology
📦 48-TQFP (7x7)
10Base-T/100Base-TX Ethernet physical-layer transceiver · 10 Mbps and 100 Mbps · 1 channel · MII, RMII, and SMII · Single supply · 3.3 V · 3.135 V to 3.465 V · IEEE 802.3 and IEEE 802.3u

✓ Em estoque

$3.6094 / unidade

Ver ficha técnica →

KSZ8041TL

✅ Drop-In
Microchip Technology
📦 48-TQFP (7x7)
10BASE-T/100BASE-TX Ethernet physical-layer transceiver · 10 Mb/s and 100 Mb/s · MII, RMII, and SMII · Single-supply · 10BASE-T and 100BASE-TX · Yes; intended to extend signaling distance while reducing power consumption · HP Auto MDI/MDIX · INTRP on pin 32; optional PHY-register status-update signal

Consulte o preço

Ver ficha técnica →

KSZ8041FTL-TR

✅ Drop-In
Microchip Technology
📦 48-TQFP (7x7)
10Base-T, 100Base-TX, 100Base-FX · 10 Mb/s to 100 Mb/s · 3.135 V to 3.465 V · Single supply · MII, RMII, SMII · 1 · 1 · HP Auto MDI/MDI-X

Consulte o preço

Ver ficha técnica →

KSZ8041TL-TR

✅ Drop-In
Microchip Technology
📦 48-TQFP (7x7)
10BASE-T/100BASE-TX Ethernet physical-layer transceiver · 10 Mb/s and 100 Mb/s · MII, RMII, and SMII · Single-supply · 10BASE-T and 100BASE-TX · Yes; intended to extend signaling distance while reducing power consumption · HP Auto MDI/MDIX · INTRP on pin 32; optional PHY-register status-update signal

Consulte o preço

Ver ficha técnica →

KSZ8041FTLI Especificações

Product Type 10/100 Ethernet physical-layer transceiver
Ethernet Speed Support 10Base-T and 100Base-TX
Host Interface MII, RMII, and SMII
Supply Architecture Single supply
Crossover Support HP Auto-MDI/MDI-X
Encapsulamento 48-pin TQFP
Package Dimensions 7 mm x 7 mm
Temperatura de operação -40 C to +85 C
Tipo de montagem Surface mount
Manufacturer Microchip Technology
Port Count 1 Ethernet port
Media Type Twisted-pair copper

Guia de Configuração de Pinos do KSZ8041FTLI 7 mm x 7 mm

Configuração de pinos para KSZ8041FTLI (pacote 7 mm x 7 mm). A numeração dos pinos, funções e diagramas de conexão estão definidos no datasheet do fabricante. Consulte-o para o footprint exato e diretrizes de soldagem.

Diagrama de pinagem do pacote 7 mm x 7 mm para KSZ8041FTLI

Nenhum dado detalhado de pinagem disponível para KSZ8041FTLI.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

KSZ8041FTLI é adequado para 6 aplicaçãos: Industrial Ethernet Control Systems, Embedded Network Gateways, Network Printers and Peripherals, Access and Terminal Equipment, Industrial Networking Equipment, Embedded Test and Measurement Products.

🏭

Industrial Ethernet Control Systems

The KSZ8041FTLI fits industrial controllers, PLC peripherals, and factory equipment that need a single 10/100 Ethernet port. Its MII, RMII, and SMII interfaces allow connection to different host-controller architectures, while the 48-TQFP package supports conventional surface-mount assembly. The PHY should be placed near the Ethernet transformer, with supply bypass and interface traces arranged according to the manufacturer’s layout guidance. Its -40 C to +85 C operating range is suitable for industrial-temperature equipment when the remaining system components also satisfy their own environmental limits.

🌐

Embedded Network Gateways

The KSZ8041FTLI can provide the physical layer for embedded gateways that bridge a local processor or microcontroller to a 10/100 Ethernet network. RMII is useful when the host controller and PHY share a 50 MHz reference and require fewer interface signals than MII; SMII provides another documented interface option. The mixed-signal design is intended to extend signaling distance while reducing power consumption. Layout quality remains critical because long digital traces or an improperly grounded analog section can degrade receive performance even when nominal component specifications are met.

🖨️

Network Printers and Peripherals

The KSZ8041FTLI suits network-enabled printers, scanners, and print peripherals that require a 10Base-T or 100Base-TX physical layer. A single PHY supports copper networking without the complexity of a multiport Ethernet switch. The host processor can use the most suitable documented interface among MII, RMII, and SMII, reducing signal count where system constraints favor RMII. Keep the PHY close to the magnetics and route clock and data signals over a continuous reference plane to preserve signal integrity across the printed-circuit board.

🖥️

Access and Terminal Equipment

The KSZ8041FTLI is appropriate for single-port access terminals, point-of-sale equipment, and communication endpoints that connect an embedded controller to an Ethernet LAN. HP Auto-MDI/MDI-X operation simplifies link crossover handling for direct copper connections, while the single-supply architecture supports compact implementations. Exact supply voltage, reset behavior, strap configuration, and timing limits must be implemented from the manufacturer datasheet. Confirm that the selected suffix maintains the required operating-temperature grade and production status.

📡

Industrial Networking Equipment

The KSZ8041FTLI can serve as the Ethernet physical layer in monitors, bridges, embedded telemetry equipment, and single-port network interface modules. Its -40 C to +85 C operating range supports industrial-temperature designs, while the 48-TQFP package provides a practical path for automated assembly. Because Ethernet performance depends on the complete physical channel, use suitable network magnetics, controlled-impedance routing, a stable clock source, and careful separation between analog and digital return currents. Validate the complete channel rather than relying only on nominal PHY specifications.

🧰

Embedded Test and Measurement Products

The KSZ8041FTLI can add Ethernet connectivity to embedded test instruments, analyzers, and measurement controllers that need a deterministic 10/100 copper interface. The available MII, RMII, and SMII host interfaces support different processor interfaces and clocking arrangements. When designing the PCB, place the PHY near the Ethernet transformer, provide low-impedance supply connections, and maintain short analog traces. The host interface should also be routed over a continuous ground plane with no plane splits beneath high-speed clock or data nets.

What is the KSZ8041FTLI?
The KSZ8041FTLI is a Microchip Technology single-port Ethernet physical-layer transceiver for 10Base-T and 100Base-TX copper networks. It provides MII, RMII, and SMII host interfaces, uses a single-supply mixed-signal design, and is packaged in a 48-pin TQFP. The manufacturer identifies it as a KSZ8041-series 10/100 PHY transceiver.
What Ethernet speeds does KSZ8041FTLI support?
The KSZ8041FTLI supports 10Base-T and 100Base-TX Ethernet operation on twisted-pair copper cabling. It is intended for single-port embedded Ethernet designs rather than multiport switching. The physical-layer device also provides MII, RMII, and SMII interfaces so the host controller can be selected according to timing and board-space requirements.
Where can I download the KSZ8041FTLI datasheet?
The KSZ8041FTLI datasheet can be accessed through the manufacturer’s KSZ8041 product page at https://www.microchip.com/en-us/product/KSZ8041. That page provides the device documentation, product information, and supporting design resources. For PCB implementation, use the manufacturer’s pin-description table and layout guidance rather than relying on a generic package drawing.
What is the KSZ8041FTLI pinout?
The KSZ8041FTLI uses a 48-pin TQFP package with a pin 1 marker and counter-clockwise numbering. Exact signal names, power pins, configuration straps, and no-connect positions must be taken from the manufacturer’s KSZ8041 datasheet. Use that pin-description table when assigning PCB nets and when checking RMII or MII connections.
Which interface should I use with KSZ8041FTLI?
Choose MII, RMII, or SMII according to the host controller and PCB constraints. MII provides separate parallel signals for transmit and receive but uses more pins; RMII reduces interface width and is common in compact embedded systems; SMII is intended for specific serial-interface arrangements. Confirm signal timing, clock direction, and supported host-controller implementation in the manufacturer documentation.
Does KSZ8041FTLI support auto MDI/MDI-X crossover?
Yes. The KSZ8041FTLI includes HP Auto-MDI/MDI-X operation, allowing the PHY to handle crossover requirements automatically for the connected copper link. This simplifies Ethernet hardware design by reducing the need for manual crossover logic. The feature still requires the appropriate external magnetics and connector implementation specified for the design.
What is the operating temperature range of KSZ8041FTLI?
The KSZ8041FTLI is specified for an operating temperature range of -40 C to +85 C. That range covers industrial-temperature applications and provides useful margin in systems with internal temperature variation. Keep the PHY within its specified limits while also observing the separate absolute maximum ratings for supply and signal pins.
What is the difference between KSZ8041FTLI and KSZ8041TLI-S?
The KSZ8041FTLI and KSZ8041TLI-S are compared as members of the same KSZ8041 family, with package and interface characteristics requiring direct review before substitution. Cross-reference information identifies them as related candidates, but it does not establish that every temperature, configuration, or lifecycle detail is identical. Verify the exact ordering code and datasheet before using either part as a replacement.
What is the best drop-in replacement for KSZ8041FTLI?
The closest documented drop-in candidates are related KSZ8041 ordering codes that use the same 48-pin TQFP format and support the same 10/100 Ethernet PHY function. KSZ8041FTL-TR and KSZ8041TLI-S appear in the available cross-reference results, while KSZ8041TLI and KSZ8041TL provide additional family comparisons. Confirm pin names, temperature grade, configuration straps, and lifecycle status before production use.
What is the Microchip equivalent for KSZ8041FTLI?
Microchip’s KSZ8041TLI and KSZ8041TL are documented comparisons for the KSZ8041FTLI and use the same 48-pin TQFP format. KSZ8041TLI-S is another related ordering code shown in the KSZ8041 comparison results. These are same-family candidates rather than blanket approvals; the exact suffix determines temperature range, packing, qualification, and possibly configuration details.
Can KSZ8041FTLI replace an Ethernet PHY in an existing design?
The KSZ8041FTLI can replace a 48-pin TQFP 10/100 Ethernet PHY only when the existing board provides the same supply, MII/RMII/SMII pin assignments, reset and strap logic, clocking, and magnetics interface. Check pin names and interface mode settings against the manufacturer’s tables. PCB changes may be required if the original PHY uses a different footprint or nonstandard signal arrangement.
How should I lay out a KSZ8041FTLI Ethernet board?
Place the KSZ8041FTLI close to the Ethernet transformer and connector to minimize analog trace length and loop area. Route MII, RMII, or SMII signals over a continuous reference plane with controlled impedance, and place decoupling and crystal or clock circuitry according to the manufacturer’s layout guidance. Keep switching-current paths and high-speed digital return currents away from sensitive receive and bias nodes.
What power and decoupling are required for KSZ8041FTLI?
The KSZ8041FTLI requires a clean single supply and correctly placed bypass capacitors to support its analog and digital sections. The exact recommended voltage, capacitor values, ESR or ESR requirements, and sequencing conditions must be taken from the manufacturer datasheet. Place the specified capacitors close to their associated power pins and minimize supply-loop impedance.
What are the key specifications engineers should know about KSZ8041FTLI?
The key engineering facts are single-port 10Base-T and 100Base-TX support, MII/RMII/SMII host interfaces, single-supply operation, HP Auto-MDI/MDI-X, a 48-pin 7 mm x 7 mm TQFP package, and a -40 C to +85 C operating range. These features place it in the Ethernet interface IC category for embedded single-port copper-networking designs.
Where can I buy KSZ8041FTLI and what is the lead time?
Use the Request a Quote form on this page for current availability, lead time, and commercial terms for KSZ8041FTLI. The manufacturer and distributor pages listed for this device can be used to confirm the ordering code and documentation, but current supply should be confirmed at the time of order. The exact suffix and transport packaging should be stated with the request.
How much does KSZ8041FTLI cost?
The KSZ8041FTLI is priced according to the exact ordering code, quantity, and current supply position. Submit the MPN and required quantity through the Request a Quote form on this page to obtain the applicable commercial response without relying on a stale listing price. For budgeting, also confirm whether the required form is the standard ordering code or the tape-and-reel suffix shown in the device documentation.
Is KSZ8041FTLI in stock?
Current stock for KSZ8041FTLI should be confirmed through the Request a Quote form on this page, which can respond with the current supply status and expected lead time for the requested quantity. Include the desired package or shipping form and production quantity in the request so the quotation reflects the part you actually need.

Dados de referência de engenharia para KSZ8041FTLI — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose KSZ8041FTLI for a new single-port 10/100 Ethernet design that needs MII, RMII, or SMII connectivity and an industrial-temperature range of -40 C to +85 C. KSZ8041TLI-S is a close family candidate when its exact suffix-specific temperature, configuration, and qualification characteristics satisfy the product requirements. KSZ8041TL is less suitable when the full -40 C to +85 C range is required because its comparison identifies a 0 C to +70 C limit. KSZ8041FTL-TR retains the same 48-TQFP KSZ8041FT family format and may suit procurement requirements tied to that ordering code. Before replacing any installed PHY, compare pin names, strap settings, reset requirements, interface timing, clock arrangement, magnetics interface, and operating-temperature grade rather than relying on the package name alone.

Comparação com alternativas

Parâmetro Este produto KSZ8041TLI-S KSZ8041TLI KSZ8041TL KSZ8041FTL-TR
Package 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7) 48-TQFP (7x7)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Ethernet Function 10Base-T/100Base-TX physical-layer transceiver 10Base-T/100Base-TX physical-layer transceiver 10Base-T/100Base-TX physical-layer transceiver 10Base-T/100Base-TX physical-layer transceiver 10Base-T/100Base-TX physical-layer transceiver
Host Interfaces MII, RMII, and SMII MII, RMII, and SMII MII, RMII, and SMII MII, RMII, and SMII MII, RMII, and SMII
Port Count 1 1 1 1 1
Supply Architecture Single supply Single supply Single supply Single supply Single supply

Principais diferenciais

  • Broader specified operating-temperature range than KSZ8041TL (vs KSZ8041TL)
  • Family-compatible 48-TQFP footprint (vs KSZ8041TLI-S)
  • Same core 10/100 PHY architecture as KSZ8041FTL-TR (vs KSZ8041FTL-TR)

Notas de projeto

Place the KSZ8041FTLI close to the Ethernet transformer and RJ45 connector. Keep the transmit and receive analog paths compact, avoid unnecessary stubs, and maintain a continuous ground reference beneath the PHY. Follow the manufacturer’s reference layout for component placement and copper geometry because small changes in the physical-layer channel can affect signal integrity and EMI performance.

Use the exact recommended supply voltage, bypass capacitance, and placement rules stated in the manufacturer datasheet. Place each specified capacitor adjacent to its associated power pin and minimize the loop area through the power and ground paths. Do not assign a nominal capacitor value without checking the datasheet’s ESR, voltage, temperature, and tolerance requirements.

Route MII, RMII, or SMII clocks and data over a continuous reference plane without split-plane crossings. Match trace lengths according to the selected interface timing requirements, and confirm the clock source, amplitude, and jitter expectations for the host controller. The RMII reference clock must be distributed cleanly to avoid data-to-clock skew that can cause intermittent framing errors.

Do not treat the suffix as interchangeable without checking its meaning. The KSZ8041TL comparison identifies a reduced 0 C to +70 C temperature range compared with -40 C to +85 C for KSZ8041FTLI. Before substitution, verify pin names, reset behavior, configuration straps, interface mode, operating-temperature grade, and qualification requirements against the manufacturer documentation.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

Compliance attributes are not stated in the available manufacturer and distributor records. The comparison search references RoHS and REACH status for related KSZ8041 variants but does not provide a definitive status for KSZ8041FTLI.

Buscas relacionadas

KSZ8041FTLI datasheet KSZ8041FTLI pinout KSZ8041FTLI datasheet pdf KSZ8041FTLI equivalent KSZ8041FTLI replacement KSZ8041FTLI cross reference KSZ8041FTLI vs KSZ8041TLI-S KSZ8041FTLI footprint KSZ8041FTLI 48-TQFP KSZ8041FTLI application circuit KSZ8041FTLI price KSZ8041FTLI stock Microchip KSZ8041FTLI KSZ8041 MII RMII SMII PHY KSZ8041FTLI Ethernet transceiver

Componentes & termos relacionados

Microchip Technology KSZ8041FTLI KSZ8041TLI-S KSZ8041TLI KSZ8041TL KSZ8041FTL-TR KSZ8041TL-TR Ethernet PHY physical-layer transceiver 10Base-T 100Base-TX MII RMII SMII HP Auto-MDI/MDI-X 48-TQFP TQFP package family surface-mount package Ethernet interface IC embedded networking industrial Ethernet network magnetics single-supply mixed-signal design 10/100 Ethernet Interface ICs
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ