Microchip Technology

KSZ8061RNBW - 10/100 Ethernet PHY | Microchip | 32-QFN

Teilenummer: KSZ8061RNBW ✓ Aktiv
3.3 V Vdss 10BASE-T and 100BASE-TX Rds(on) 32-pin VQFN, 5 x 5 mm Package
MOQ: 1 |

KSZ8061RNBW Übersicht

The Microchip Technology KSZ8061RNBW is a single-channel 10BASE-T/100BASE-TX Ethernet physical-layer transceiver with a 32-QFN 5 x 5 mm package and 3.3 V supply operation. It supports data rates of 10 Mb/s and 100 Mb/s over unshielded twisted-pair cable, integrating the digital media-access-control-side interface, analog transmit and receive channels, filtering, and link-management functions in one device.

An Ethernet physical-layer transceiver, commonly called an Ethernet PHY, is the interface between a network controller and physical copper cable. The PHY belongs to the Ethernet interface IC hierarchy, where a link-layer controller transfers frames through the PHY to a 10/100BASE-TX network. Its primary roles are line coding, signal shaping, receive equalization, link detection, and recovery of valid data from the physical medium.

The KSZ8061 offers two supported Ethernet speeds, 10 Mb/s and 100 Mb/s, in a compact 32-QFN package measuring 5 x 5 mm. It operates from a 3.3 V supply and incorporates Quiet-WIRE internal filtering, a Microchip feature intended to reduce line noise and improve signal quality in network equipment. These characteristics make the device suitable for compact Ethernet endpoints that require 10/100BASE-TX connectivity without a separate magnetics-based implementation.

The KSZ8061 family integrates the physical-layer functions required for transmission and reception over unshielded twisted-pair media. Full-duplex operation is supported, while internal Quiet-WIRE filtering addresses unwanted signal content on the line. The small 5 x 5 mm QFN footprint supports dense equipment layouts, but its exposed thermal and electrical requirements still demand careful PCB planning and controlled layout of high-speed differential nets.

Typical uses include industrial Ethernet controllers, embedded network equipment, network interface cards, print servers, IP cameras, and compact communications equipment. In these systems, the KSZ8061 provides the physical copper interface while an Ethernet MAC or communications controller handles frame processing. Designers should pair it with suitable magnetics or an integrated network interface arrangement and implement a manufacturer-recommended 100-ohm differential transmission environment.

PCB implementation requires short, symmetric differential routing from the PHY to the network connector or magnetics, continuous reference planes, controlled impedance, and unobstructed return paths. Decoupling capacitors should be connected close to the supply and ground pins. Differential pair routing, isolation from noisy switching circuitry, and verification with Ethernet compliance testing are more important than raw component count when achieving reliable 100BASE-TX performance.

This product page organizes the KSZ8061RNBW specifications, application guidance, verified source links, and carefully scoped replacement information. It also identifies the electrical, package, lifecycle, and pin-level details that should be confirmed in the manufacturer datasheet before schematic release or PCB layout.

Drop-in-Alternativen für KSZ8061RNBW – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit KSZ8061RNBW (gleiche Bauform und Footprint) – abweichend in Package, Product Type, Supply Voltage.

Microchip Technology
Package: 32-VFQFN exposed-pad package, 5 mm x 5 mm
Product Type: 10BASE-T/100BASE-TX physical-layer transceiver
Vergleichen mit KSZ8061RNBW →
Microchip Technology
Package: 32-QFN (5x5 mm) with EPAD
Product Type: Ethernet PHY Transceiver (10/100Base-TX)
Supply Voltage: 3.3 V (single supply)
Vergleichen mit KSZ8061RNBW →

KSZ8041RNL

✅ Drop-In
Microchip Technology
📦 32-QFN
10BASE-T/100BASE-TX physical-layer transceiver · 10 Mb/s and 100 Mb/s · Full RMII · 1/1 · 3.135 V to 3.465 V · Single supply · 25 MHz crystal · 50 MHz to the media access controller

Preis auf Anfrage

Datenblatt ansehen →

KSZ8061RNBW Technische Daten

Product Type 10/100BASE-TX Ethernet physical-layer transceiver
Supported Data Rates 10 Mb/s and 100 Mb/s
Channel Count 1 channel
Duplex Mode Full duplex
Versorgungsspannung 3.3 V
Cable Medium Unshielded twisted-pair cable
Gehäuse 32-pin VQFN, 5 x 5 mm
Montageart Surface mount
Internal Filtering Quiet-WIRE internal filtering
Ethernet Standards 10BASE-T and 100BASE-TX

KSZ8061RNBW 32-pin vqfn, 5 x 5 mm Pinbelegungsleitfaden

Pinbelegung für KSZ8061RNBW (32-pin vqfn, 5 x 5 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für KSZ8061RNBW im 32-pin vqfn, 5 x 5 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für KSZ8061RNBW.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

KSZ8061RNBW ist geeignet für 6 Anwendungs: Industrial Ethernet Gateway, Embedded Network Interface Card, IP Camera Network Interface, Print Server Connectivity, Network Communications Equipment, Compact Automation Controller.

🏭

Industrial Ethernet Gateway

The KSZ8061RNBW fits an industrial Ethernet gateway that must connect an embedded controller to a 10/100BASE-TX network. Its 10 Mb/s and 100 Mb/s support covers legacy and Fast Ethernet plant networks, while the 3.3 V operation simplifies integration with modern embedded processors. The 32-pin 5 x 5 mm QFN package preserves board area near the network connector. Quiet-WIRE internal filtering can reduce unwanted line signal content, but industrial qualification still requires confirmation of the exact temperature grade, surge exposure, isolation strategy, and enclosure grounding before production release.

🖥️

Embedded Network Interface Card

An embedded network interface card can use the KSZ8061RNBW as the physical interface between a communications controller and twisted-pair Ethernet. The device provides separate 10BASE-T and 100BASE-TX operation in a compact 32-QFN package, allowing a shared controller design to support both Fast Ethernet and 10 Mb/s links. Designers should provide a stable 3.3 V rail, place decoupling close to the PHY, and route the differential pair as a controlled-impedance net. External magnetics or the manufacturer’s supported integrated interface arrangement remain important choices for isolation and compliance.

🎥

IP Camera Network Interface

The KSZ8061RNBW is appropriate for the Ethernet connection stage of an IP camera or similar compact vision endpoint. A 100 Mb/s link supports image transport at the physical layer, while 10 Mb/s support provides compatibility with slower management networks. The 5 x 5 mm QFN footprint is useful where board space is constrained, and Quiet-WIRE filtering helps manage unwanted signal content on copper media. The design must still protect the PHY from camera power-supply noise and route the Ethernet differential pair without stubs or impedance discontinuities.

🖨️

Print Server Connectivity

A print server can use the KSZ8061RNBW to connect a network controller or embedded system to 10BASE-T or 100BASE-TX infrastructure. Supporting both rates improves deployment flexibility across legacy and modern office networks, while full-duplex operation supports simultaneous data transfer and control traffic. The 3.3 V device and compact 32-QFN package fit densely populated embedded controller boards. Layout should isolate the PHY from switching regulators and motors, preserve a continuous ground reference, and follow the manufacturer’s recommended Ethernet magnetics and termination arrangement.

🌐

Network Communications Equipment

The KSZ8061RNBW can serve as the copper-media interface in network communications equipment with a 10/100 Mb/s link. Its full-duplex PHY operation and Quiet-WIRE internal filtering suit equipment that must preserve signal quality between a MAC and unshielded twisted-pair cabling. The 5 x 5 mm QFN package permits placement close to the connector and magnetics, reducing board area and helping maintain differential routing quality. Confirm operating temperature, supply limits, exposed-pad treatment, and all digital timing constraints in the manufacturer datasheet before qualifying the equipment.

🔧

Compact Automation Controller

A compact automation controller can use the KSZ8061RNBW when it requires wired Ethernet connectivity without occupying a large package area. Supporting both 10 Mb/s and 100 Mb/s allows the controller to operate across older and faster network segments, while the 3.3 V supply matches many embedded processor platforms. In a factory environment, the PHY should be positioned away from switching power stages and high-current traces. Validate temperature range, conducted-noise behavior, network isolation, and surge requirements for the intended installation class.

Zusammenfassung der empfohlenen Produkte

KSZ8041RNL Microchip Technology Verwendet in: Industrial Ethernet Gateway, Print Server Connectivity, Compact Automation Controller KSZ8061 Functional Ethernet PHY family Verwendet in: Embedded Network Interface Card, IP Camera Network Interface, Network Communications Equipment
What is the KSZ8061RNBW?
The KSZ8061RNBW is a single-channel 10BASE-T/100BASE-TX Ethernet physical-layer transceiver from Microchip Technology. It supports 10 Mb/s and 100 Mb/s communication over unshielded twisted-pair cable, operates from a 3.3 V supply, and is packaged in a 32-pin QFN measuring 5 x 5 mm. According to the Microchip KSZ8061 product page, the family includes Quiet-WIRE internal filtering and combines transmit and receive functions in one physical-layer device.
What are the key specifications of KSZ8061RNBW that engineers should know?
The KSZ8061RNBW is a 3.3 V, single-channel 10/100 Ethernet PHY in a 32-pin 5 x 5 mm QFN package. Its supported signaling rates are 10 Mb/s and 100 Mb/s over unshielded twisted pair, and it supports full-duplex operation. According to the Microchip KSZ8061 family documentation, Quiet-WIRE internal filtering is included to reduce line noise and improve signal integrity. Exact pin functions, current limits, temperature limits, and timing values should be confirmed in the manufacturer datasheet.
What Ethernet speeds does KSZ8061RNBW support?
The KSZ8061RNBW supports both 10 Mb/s 10BASE-T and 100 Mb/s 100BASE-TX operation. The supported-rate set matches the two legacy Fast Ethernet rate classes and does not include 1000 Mb/s operation. According to the Microchip KSZ8061 family description, the device transmits and receives data over unshielded twisted-pair cable and operates as a full-duplex physical-layer interface.
Where can I download the KSZ8061RNBW datasheet PDF?
The official KSZ8061RNBW documentation is available through the Microchip Technology KSZ8061 product page, with a dedicated datasheet download also indexed for the device. Use the manufacturer link for the authoritative electrical characteristics, pin description, register map, layout guidance, and application circuit. The Microchip product URL is https://www.microchip.com/en-us/product/KSZ8061. For the complete 32-pin mapping, consult the pin-description table rather than relying on a generic QFN-32 diagram.
Where can I find the KSZ8061RNBW pinout?
The KSZ8061RNBW pinout is found in the pin-description table and package drawing in the Microchip KSZ8061 datasheet. The device uses a 32-pin QFN package, but the exposed pad and signal assignments must not be inferred from a generic 32-pin footprint library. According to Microchip documentation, the exposed pad is part of the thermal and electrical design and requires the package-specific land pattern. Use the manufacturer drawing to assign every net.
Is KSZ8061RNBW suitable for industrial Ethernet equipment?
The KSZ8061RNBW is suitable for industrial Ethernet equipment requiring a 10/100BASE-TX copper interface and a compact 3.3 V solution. Its 100 Mb/s capability and full-duplex operation fit legacy industrial controllers, embedded gateways, and machine-to-machine links. The manufacturer lists the KSZ8061 family with Quiet-WIRE filtering, but the specific temperature grade, isolation requirements, regulatory approvals, and surge requirements must be checked for each industrial environment.
Can KSZ8061RNBW replace KSZ8041RNL?
KSZ8041RNL is a candidate for replacement evaluation because the cross-reference information directly compares it with KSZ8061RNBW and both belong to the Microchip 10/100 Ethernet PHY portfolio. The confirmed common points include 10BASE-T/100BASE-TX operation and a 32-lead QFN-class package. Before treating it as a drop-in replacement, verify every pin name, supply sequence, strap configuration, register default, magnetic-interface arrangement, and package land pattern against both manufacturer datasheets.
What is the difference between KSZ8061RNBW and KSZ8041RNL?
The primary confirmed difference is that KSZ8061RNBW belongs to the KSZ8061 family with Quiet-WIRE internal filtering, while KSZ8041RNL belongs to the KSZ8041 series. Both provide a 10BASE-T/100BASE-TX Ethernet physical-layer function. The manufacturer comparison page does not establish identical pin mapping or all electrical limits, so the two devices should be treated as a replacement candidate rather than an unconditional drop-in until the complete pin and register tables have been compared.
When should I choose KSZ8061RNBW over KSZ8041RNL?
Choose KSZ8061RNBW when the design benefits from the Quiet-WIRE filtering feature and its exact electrical and register definitions match the intended Ethernet design. Consider KSZ8041RNL only after confirming that its pin assignments, media interface, configuration pins, and operating limits are fully compatible with the existing PCB. The confirmed Ethernet speed overlap is 10/100 Mb/s, but that alone does not prove drop-in interchangeability for clocking, straps, magnetics, or software configuration.
What is the best drop-in replacement for KSZ8061RNBW?
KSZ8041RNL is the closest documented Microchip replacement candidate because a dedicated comparison identifies it against KSZ8061RNBW. Both support 10BASE-T and 100BASE-TX signaling in a 32-pin QFN-class package, making it the strongest candidate for board-level evaluation. However, a final drop-in designation requires confirmation of all 32 pin assignments, exposed-pad connection, strap levels, supply timing, register defaults, and external network-interface components from the manufacturer datasheets.
Where can I buy KSZ8061RNBW online?
Use the Request a Quote form on this page to request KSZ8061RNBW availability, a formal quotation, and the lead time for the exact 32-QFN ordering code. The form helps prevent confusion with other KSZ8061 package or tape-and-reel variants. Current channel availability and delivery timing can change, so a written quotation is more reliable than treating a distributor search result as a guaranteed stock commitment.
What is the price of KSZ8061RNBW?
A current quotation for KSZ8061RNBW is available through the Request a Quote form on this page. The quote should identify the exact MPN KSZ8061RNBW, the 32-QFN package, and the requested order quantity. Pricing and lifecycle can vary with quantity, inventory, and shipping destination, so obtain the current amount from the form rather than relying on a historical listing or an unqualified starting-price reference.
What is the lead time for KSZ8061RNBW?
The current lead time for KSZ8061RNBW should be requested through the Request a Quote form on this page. The exact code, package, quantity, and destination are needed to confirm scheduling and delivery. Microchip’s active KSZ8061 product page supports current sourcing, but it does not by itself establish a guaranteed lead time for a specific order quantity.
Is KSZ8061RNBW in stock?
KSZ8061RNBW stock status should be confirmed through the Request a Quote form on this page for the exact ordering code. Retailer search pages may show cached availability or a starting-price reference, but neither proves current stock for the quantity being purchased. A quotation tied to the MPN and required quantity provides the appropriate sourcing confirmation.
What layout practices are important for the KSZ8061RNBW?
The KSZ8061RNBW layout should preserve controlled-impedance differential Ethernet routing, continuous reference planes, short return paths, and close supply decoupling. According to the Microchip KSZ8061 documentation, Quiet-WIRE internal filtering is an intended signal-quality feature; external layout must still prevent switching noise, unbalanced differential routing, and unintended coupling into the PHY. Follow the manufacturer’s recommended 32-QFN land pattern and exposed-pad connection exactly.

Technische Referenzdaten für KSZ8061RNBW – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose KSZ8061RNBW when the design requires a Microchip 10/100BASE-TX PHY with Quiet-WIRE internal filtering, full-duplex operation, and a compact 32-QFN footprint. It is especially attractive for compact industrial, communications, imaging, and embedded-network designs that use a 3.3 V supply and can satisfy the manufacturer’s layout and magnetics recommendations. Consider KSZ8041RNL when its electrical limits, register map, strap behavior, and exact pin assignments are validated against the existing PCB. The documented match in 10/100 Mb/s support and 32-pin QFN class makes it a strong replacement candidate, but it should not be treated as an unconditional drop-in until all exposed-pad, pin, timing, and interface details are compared. For a new design, prefer KSZ8061RNBW when its filtering feature and defined KSZ8061 documentation align with the system requirements.

Vergleich mit Alternativen

Parameter Dieses Produkt KSZ8041RNL
Brand Microchip Technology Microchip Technology
Package 32-QFN, 5 x 5 mm 32-QFN
Product Type 10/100BASE-TX Ethernet PHY Ethernet PHY
Supported Data Rates 10 Mb/s and 100 Mb/s 10 Mb/s and 100 Mb/s
Channel Count 1 channel 1 channel
Duplex Mode Full duplex Full duplex
Pin Count 32 pins 32 pins

Wichtigste Unterscheidungsmerkmale

  • Quiet-WIRE internal filtering in the selected family (vs. KSZ8041RNL)
  • Direct 10/100BASE-TX PHY function in a compact package (vs. KSZ8041RNL)
  • Single-chip Ethernet physical-layer integration (vs. KSZ8041RNL)

Designhinweise

Route the Ethernet differential pair as a short, balanced, continuously referenced network with no test pads, stubs, or plane discontinuities. Keep the PHY close to the magnetics or connector and use the manufacturer’s 32-QFN land pattern exactly. Place input and output decoupling capacitors close to their associated supply and ground pins. Do not substitute a generic QFN-32 footprint without checking exposed-pad dimensions and pin-one orientation.

Use the manufacturer’s recommended Ethernet trace impedance and magnetics or integrated-interface topology. Quiet-WIRE filtering does not compensate for poor physical-layer construction: unequal differential lengths, nearby switching-current paths, oversized vias, or an interrupted reference plane can degrade the 100 Mb/s link. Validate the completed board for differential impedance, insertion loss, return loss, and conducted emissions using the applicable Ethernet test procedure.

Do not assign signals from a generic 32-QFN symbol. The KSZ8061RNBW pin names, exposed-pad connection, configuration straps, reset behavior, and supply requirements must be taken from the manufacturer pin-description table. Also verify the correct ordering code and tray or reel option. An apparently identical QFN-32 outline can have different pin assignments or thermal-pad requirements, making schematic and footprint review essential before PCB release.

Provide adequate copper and thermal relief beneath the exposed pad while following the manufacturer land-pattern guidance. The 3.3 V supply and 10/100BASE-TX operating class do not imply that thermal limits can be ignored; actual dissipation depends on the complete operating mode and surrounding PCB construction. Estimate worst-case junction temperature from device dissipation and the effective thermal resistance of the final board, then verify it under maximum ambient temperature.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The exact MPN compliance declarations require confirmation from the Microchip product page or material declaration. AEC-Q100 is not applicable because the KSZ8061RNBW is an Ethernet interface IC rather than an automotive-qualified device designation in the available product information.

Daten verifiziert am: 2026-11-09 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

KSZ8061RNBW datasheet KSZ8061RNBW datasheet pdf KSZ8061RNBW pinout KSZ8061RNBW 32-QFN footprint KSZ8061RNBW specifications KSZ8061RNBW Ethernet PHY KSZ8061RNBW equivalent KSZ8061RNBW replacement KSZ8061RNBW vs KSZ8041RNL Microchip KSZ8061RNBW KSZ8061RNBW price KSZ8061RNBW stock

Verwandte Bauteile & Begriffe

Microchip Technology KSZ8061RNBW KSZ8061 KSZ8041RNL Ethernet PHY 10BASE-T 100BASE-TX physical-layer transceiver Ethernet interface IC unshielded twisted pair UTP Quiet-WIRE full duplex 10 Mb/s 100 Mb/s 3.3 V 32-QFN QFN family surface-mount package differential pair Ethernet magnetics controlled impedance MAC semiconductor
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen