Microchip Technology

KSZ8873RLLU - 3-Port 10/100 Ethernet Switch | Microchip

Teilenummer: KSZ8873RLLU ✓ Aktiv
1.66 V to 3.465 V Vdss 64-LQFP, 10 x 10 mm Package
MOQ: 1 |

KSZ8873RLLU Übersicht

The Microchip Technology KSZ8873RLLU is a highly integrated three-port Ethernet switch designed for cost-sensitive, power-efficient 10/100 Mbps networks. It combines three Fast Ethernet PHYs, switching logic, and host-control interfaces in a 64-LQFP package measuring 10 x 10 mm. The device supports operation from 1.66 V to 3.465 V and an extended ambient temperature range of -40°C to +85°C.

An Ethernet switch is a network-interface integrated circuit that receives frames on one or more physical ports and forwards them to other ports using MAC addresses. Within the network hierarchy, the KSZ8873 is a three-port Layer 2 switch, while its integrated 10/100 Base-TX PHYs connect directly to copper Ethernet cabling without requiring separate transceiver components. Its small footprint suits compact industrial controllers, embedded gateways, and cost-sensitive access equipment.

Key features include three integrated 10/100 Mbps ports, IEEE 802.3u Fast Ethernet operation, and both I2C and SPI host interfaces. Configuration access allows the host processor to manage switch behavior, address tables, and port parameters. The RLLU ordering designation identifies the 64-LQFP package configuration, while the U suffix denotes the supplied packaging arrangement for production assembly.

The KSZ8873 family is intended to reduce board area by consolidating multiple PHY functions and switch control into one device. This lowers component count and simplifies routing compared with discrete Ethernet controllers, although each copper port still requires external magnetics, line-side filtering, and a properly terminated RJ45 interface. The integrated PHYs do not replace Ethernet transformers or the connector's isolation requirements.

Typical applications include industrial Ethernet bridges, embedded control panels, set-top and access equipment, printer controllers, machine vision systems, and compact network appliances. Each port must be checked against the system's link-speed, cable-length, and auto-negotiation requirements. Designers should also review the manufacturer reference schematic for recommended magnetics and impedance-controlled differential routing.

A key design consideration is the relationship between switching performance and copper-magnetics selection. Although the switch provides 10/100 Mbps data paths, board-level EMI and return-loss performance depend on the transformer, center-tap termination, Bob Smith termination, and controlled-impedance layout. Review the pin-description and layout guidance in the Microchip KSZ8873 datasheet before assigning PCB nets.

This page consolidates package information, interface details, family substitution guidance, and application-oriented design guidance. It also identifies the electrical and layout parameters that require confirmation from the manufacturer datasheet before a new PCB is released.

Drop-in-Alternativen für KSZ8873RLLU – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit KSZ8873RLLU (gleiche Bauform und Footprint) – abweichend in Package, Product Type, Host Interface, Ethernet Data Rate, Operating Temperature Range.

Microchip Technology
Product Type: Integrated managed Ethernet switch
Ethernet Data Rate: 10/100 Mbps
Vergleichen mit KSZ8873RLLU →
Microchip Technology
Package: 64-LQFP, 10 mm × 10 mm
Product Type: Integrated three-port managed Ethernet switch
Host Interface: MII
Vergleichen mit KSZ8873RLLU →
Microchip Technology
Package: 64-LQFP (10 mm x 10 mm)
Product Type: Integrated 3-port managed Ethernet switch with PHYs
Host Interface: MII and RMII
Vergleichen mit KSZ8873RLLU →
Microchip Technology
Package: LQFP-48
Product Type: Integrated 3-port managed Ethernet switch with PHYs
Ethernet Data Rate: 10/100 Mbps
Vergleichen mit KSZ8873RLLU →

KSZ8873MLL

✅ Drop-In
Microchip Technology
📦 64-LQFP (10x10)
Integrated three-port managed Ethernet switch · 3 ports · 10 Mbps and 100 Mbps · MII · 3 integrated PHYs · 1.8 V, 2.5 V, or 3.3 V · 0°C to +70°C · 64-LQFP, 10 mm × 10 mm

Preis auf Anfrage

Datenblatt ansehen →

KSZ8873FLL

✅ Drop-In
Microchip Technology
📦 64-LQFP (10x10)
Integrated managed Ethernet switch · 3 ports · 10/100 Mbps · 2 ports · 3 integrated Fast Ethernet PHYs · I2C and SPI · One MII interface · CPU control and data interfaces

Preis auf Anfrage

Datenblatt ansehen →

KSZ8873RLL

✅ Drop-In
Microchip Technology
📦 64-LQFP (10x10)
Integrated 3-port managed Ethernet switch with PHYs · 3 ports · 10/100 Mbps · 100 Mbps · 10/100BASE-T/TX · MII and RMII · I2C and SPI · 2.5 V and 3.3 V

Preis auf Anfrage

Datenblatt ansehen →

KSZ8873RLLI

✅ Drop-In
Microchip Technology
📦 64-LQFP (10x10)
Integrated 3-port managed Ethernet switch with PHYs · 3 ports · 10/100 Mbps · 10/100 Base-T/TX PHY · I2C and SPI · RMII · 1.8 V, 2.5 V, and 3.3 V · 115 mA

Preis auf Anfrage

Datenblatt ansehen →

KSZ8873RLLU Grenzwerte & elektrische Eigenschaften

Device Type 3-port Ethernet switch with integrated 10/100 Base-TX PHYs
Number of Ports 3 ports
Datenrate 10/100 Mbps per port
Ethernet Standard IEEE 802.3u
Supply Voltage Range 1.66 V to 3.465 V
Host Interface I2C and SPI
Gehäuse 64-LQFP, 10 x 10 mm
Montageart Surface mount
Betriebstemperaturbereich -40°C to +85°C
Temperature Grade Extended temperature
Port Count 3 integrated Fast Ethernet ports
Media Support 10/100 Base-TX copper Ethernet
Product Family KSZ8873MML/MLL/FLL/RLL
Interface Control I2C or SPI host configuration
Switch Function Integrated Layer 2 Ethernet switching

KSZ8873RLLU 64-lqfp, 10 x 10 mm Pinbelegungsleitfaden

Pinbelegung für KSZ8873RLLU (64-lqfp, 10 x 10 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für KSZ8873RLLU im 64-lqfp, 10 x 10 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für KSZ8873RLLU.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

KSZ8873RLLU ist geeignet für 6 Anwendungs: Industrial Ethernet Bridge, Embedded Network Appliance, Machine Vision Controller, Printer and Imaging Controller, Set-Top and Access Equipment, Building and Energy Control Gateway.

🏭

Industrial Ethernet Bridge

The KSZ8873RLLU suits a compact industrial bridge that must distribute 10/100 Mbps copper links among sensors, a controller, and an upstream gateway. Its three integrated PHYs avoid the area and routing overhead of three discrete network interfaces, while I2C or SPI allows the host processor to configure the switch. Because the device operates from 1.66 V to 3.465 V, it can share a low-voltage industrial system rail. External isolation magnetics, controlled-impedance routing, and EMI filtering remain essential to achieve reliable copper links in industrial cabinets.

🖥️

Embedded Network Appliance

A compact gateway, controller, or print server can use the KSZ8873RLLU to provide three 10/100 Mbps service ports without adding separate PHY packages. Its 64-LQFP 10 x 10 mm footprint preserves routing space in densely populated boards, and the extended -40°C to +85°C range supports industrial and harsh indoor equipment. The host processor selects configuration through I2C or SPI, simplifying firmware access to switch functions. Engineers must still reserve space for RJ45 connectors, isolation transformers, and the recommended termination network around every copper port.

🎥

Machine Vision Controller

The KSZ8873RLLU can connect a machine-vision controller to cameras, a vision server, and service equipment over separate 10/100 Mbps copper ports. Integrating the PHYs into one switch reduces the number of high-speed copper routing regions and keeps the control board compact. I2C management is useful when the host bus is already occupied, while SPI provides a higher-speed alternative for initialization. The 1.66 V to 3.465 V operating range supports low-voltage embedded platforms, but camera links may require careful isolation, return-loss, and EMI layout based on the chosen magnetics.

🖨️

Printer and Imaging Controller

Printers, copiers, and imaging peripherals often need several 10/100 Mbps ports for service, host, and configuration links. The KSZ8873RLLU consolidates those copper interfaces into one 64-LQFP device and provides I2C or SPI control from the embedded printer controller. Its low-port-count architecture is appropriate for cost-sensitive equipment that does not require gigabit Ethernet. Designers should use the manufacturer layout guidance to route the PHY differential pairs cleanly and should verify transformer selection against the required cable length and emission targets.

📺

Set-Top and Access Equipment

Compact set-top boxes and access equipment benefit from the KSZ8873RLLU's three integrated Fast Ethernet ports and small 64-LQFP footprint. The switch supports 10/100 Mbps service connectivity for IP television, management, or service-diagnostic functions without relying on several discrete Ethernet controllers. Its 1.66 V to 3.465 V supply range allows deployment alongside modern application processors, and I2C or SPI management keeps host integration straightforward. The enclosure still requires tested magnetics and filtering, since component integration alone does not guarantee regulatory EMI performance.

🧩

Building and Energy Control Gateway

The KSZ8873RLLU is suitable for low-cost building controllers, energy-monitoring gateways, and HVAC interface modules that connect several 10/100 Mbps devices. Three integrated PHYs support controller, upstream, and service links, while the -40°C to +85°C operating range suits equipment beyond ordinary consumer temperatures. Host configuration through I2C or SPI simplifies integration with a microcontroller or application processor. Because these products may be installed near long cables or noisy power systems, the Ethernet magnetics, return-loss structure, and chassis grounding must be evaluated as part of the complete interface design.

What is the KSZ8873RLLU?
The KSZ8873RLLU is a Microchip Technology three-port Ethernet switch with integrated 10/100 Mbps PHYs, I2C and SPI host interfaces, and a 64-LQFP package. According to the Microchip KSZ8873 product page, the KSZ8873 family is intended for low-port-count, cost-sensitive, power-efficient 10/100 Mbps switch systems, allowing one device to replace several separate copper-network interface functions.
How many Ethernet ports does the KSZ8873RLLU have?
The KSZ8873RLLU has three integrated Fast Ethernet ports operating at 10/100 Mbps. The Microchip KSZ8873 datasheet describes each port as a 10/100 Base-TX interface, so a single switch can connect three copper Ethernet endpoints. External isolation transformers and RJ45 connectors are still required because the integrated PHY does not provide the network-side isolation specified for copper Ethernet.
What is the supply voltage range of the KSZ8873RLLU?
The KSZ8873RLLU operates from 1.66 V to 3.465 V according to the published KSZ8873RLL comparison data. This range supports low-voltage embedded systems where the switch shares a 1.8 V, 2.5 V, or 3.3 V rail with the supervising processor. Confirm the exact core and I/O voltage requirements in the manufacturer pin-description table before applying the device to a new board.
What package does the KSZ8873RLLU use?
The KSZ8873RLLU is packaged in a 64-LQFP measuring 10 x 10 mm for surface-mount PCB assembly. The Microchip KSZ8873 family page identifies the RLL ordering option within the 64-LQFP family, and distributor records identify the U suffix as the packaged form. Use the manufacturer land pattern and exposed-pad or thermal recommendations rather than scaling a generic 64-pin footprint.
How do you configure the KSZ8873RLLU?
The KSZ8873RLLU is configured through its I2C or SPI host interface, giving the controlling MCU access to switch functions. The manufacturer KSZ8873 datasheet identifies both control interfaces, allowing the system processor to initialize the device and manage network operation. Select one interface according to the host bus requirements and isolate unused interface pins according to the device documentation.
Where can I download the KSZ8873RLLU datasheet PDF?
The official KSZ8873 datasheet and product resources are available from the Microchip KSZ8873 product page at https://www.microchip.com/en-us/product/KSZ8873. Use the manufacturer PDF for the complete pin list, electrical characteristics, timing values, initialization sequence, and layout guidance. Search the product-page document list for the KSZ8873 datasheet revision that matches your exact ordering code.
Where can I find the KSZ8873RLLU pinout?
The KSZ8873RLLU pinout is documented in the Microchip KSZ8873 datasheet under the pin-description and package-information sections. The RLLU device uses a 64-LQFP package, but signal assignments must not be inferred from a generic 64-pin drawing. Use the pin-description table to map VDDA, VDD, ground, reference, management, and PHY differential pairs before laying out the PCB.
What can replace the KSZ8873RLLU?
The closest documented family substitutions are the KSZ8873MLL and KSZ8873FLL, as identified by Microchip's KSZ8873 RLL/MLL/FLL substitution guidance. Whether either option is a true drop-in choice depends on its pin configuration, supported features, and the affected application. Review that support article and compare the manufacturer datasheets before changing a released design.
Can KSZ8873MLL or KSZ8873FLL replace KSZ8873RLLU?
Microchip publishes a dedicated substitution page for using the KSZ8873MLL or KSZ8873FLL where the KSZ8873RLL has availability problems. These are same-family alternatives, but substitution approval depends on the specific differences in configuration, pin usage, and features. Do not treat the substitution guidance as a blanket guarantee; verify the affected signals and board requirements against each manufacturer datasheet.
What is the best Microchip equivalent for KSZ8873RLLU?
The best-supported same-manufacturer equivalent is the KSZ8873MLL or KSZ8873FLL, because Microchip explicitly covers those substitutions for the KSZ8873RLL. The RLL and RLLI ordering options also appear in published comparison records, but each ordering code must be checked for temperature grade, packaging, and pin configuration. Choose the variant that matches the original board requirements exactly.
When should I choose the KSZ8873RLLU instead of another KSZ8873 variant?
Choose the KSZ8873RLLU when the design requires three integrated 10/100 Mbps ports, a 64-LQFP package, I2C or SPI host control, and operation across the -40°C to +85°C range. Other KSZ8873 ordering options may differ in pin configuration, temperature grade, or packaging. Select the exact variant only after comparing the relevant datasheet tables and your intended PCB footprint.
Is the KSZ8873RLLU suitable for industrial equipment?
The KSZ8873RLLU is suitable for many industrial and embedded applications because it supports -40°C to +85°C operation and integrates three 10/100 Mbps PHYs in one 64-LQFP package. Suitability still depends on the enclosure temperature, copper-magnetics selection, isolation requirements, and electromagnetic-compatibility testing. A network product intended for industrial deployment may require additional qualification beyond component temperature ratings.
Where can I buy the KSZ8873RLLU?
Use the Request a Quote form on this page to ask for KSZ8873RLLU pricing, current stock, and lead time from XAIPART. The manufacturer lists the KSZ8873 family, and distribution records include the RLLU ordering code in the 64-LQFP configuration. Provide your target quantity, date-code preference, and required production schedule so the quote can reflect the correct supply conditions.
What is the lead time for the KSZ8873RLLU?
Lead time for the KSZ8873RLLU depends on current factory and distribution inventory, so it should be confirmed for the exact ordering code and quantity. Submit the part number, annual usage, and required delivery schedule through the Request a Quote form on this page. For designs where continuity is critical, also evaluate the documented KSZ8873MLL and KSZ8873FLL substitution paths.
What are the key specifications of KSZ8873RLLU that engineers should know?
The essential KSZ8873RLLU specifications are three integrated 10/100 Mbps Ethernet ports, a 1.66 V to 3.465 V operating range, I2C and SPI host interfaces, and a 64-LQFP 10 x 10 mm package. The device supports extended temperature operation from -40°C to +85°C. These figures come from the Microchip KSZ8873 product resources and published ordering data, while timing, current, and absolute-maximum limits remain datasheet-controlled.
Is the KSZ8873RLLU the same as the KSZ8873RLLI?
The KSZ8873RLLU and KSZ8873RLLI are related KSZ8873 ordering codes, but their suffix codes must be decoded from the manufacturer ordering information before interchange is assumed. Published comparison information shows both associated with the 64-pin LQFP family, but package suffix, temperature grade, and ordering conditions can differ. Check the datasheet ordering table and perform a complete pin and temperature comparison before substitution.

Technische Referenzdaten für KSZ8873RLLU – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the KSZ8873RLLU when the design needs three integrated 10/100 Mbps copper ports, I2C or SPI host control, and a 64-LQFP 10 x 10 mm surface-mount package. It is well suited to compact bridges, access equipment, printer controllers, and industrial gateways that do not require gigabit Ethernet. Consider the KSZ8873MLL or KSZ8873FLL when availability or qualification requires a documented same-family substitution, but first verify their pin configuration and feature differences against the original design. The KSZ8873RLL is the base ordering option to evaluate when a different suffix or packaging arrangement is preferred. The KSZ8873RLLI is another related family option, but suffix-specific temperature and qualification conditions must be checked. In every case, preserve the 64-LQFP land pattern and confirm Ethernet magnetics, termination, and differential routing from the manufacturer reference design.

Vergleich mit Alternativen

Parameter Dieses Produkt KSZ8873MLL KSZ8873FLL KSZ8873RLL KSZ8873RLLI
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-LQFP (10x10) 64-LQFP (10x10) 64-LQFP (10x10) 64-LQFP (10x10) 64-LQFP (10x10)
Device Type 3-port Ethernet switch KSZ8873 family switch KSZ8873 family switch 3-port Ethernet switch KSZ8873 family switch
Ethernet Data Rate 10/100 Mbps 10/100 Mbps family 10/100 Mbps family 10/100 Mbps 10/100 Mbps

Wichtigste Unterscheidungsmerkmale

  • Three copper-network ports integrated in one device (vs. KSZ8873MLL)
  • Dual host-control options on the same family (vs. KSZ8873FLL)
  • Compact 10 x 10 mm surface-mount implementation (vs. KSZ8873RLL)

Designhinweise

Route PHY differential pairs as short, continuous, impedance-controlled traces and follow the Microchip KSZ8873 reference layout. Keep the switching and magnetics area away from noisy clock and power-conversion circuitry. Place the required bypass capacitors close to their specified supply pins and keep copper termination clear of unrelated digital return paths.

Validate the complete Ethernet interface, including the selected isolation transformer, termination components, RJ45 connector, and chassis strategy. Component placement and return-loss performance determine whether the 10/100 Mbps link is robust in the final enclosure. Use the manufacturer reference schematic and layout examples when creating the first revision rather than treating the IC footprint as a complete Ethernet design.

Do not substitute an ordering code solely because the 64-LQFP outline matches. Compare the KSZ8873MLL, KSZ8873FLL, KSZ8873RLL, and KSZ8873RLLI pin descriptions, temperature grades, and supported switch functions. Confirm unused interface handling and initialization requirements in the manufacturer documentation before releasing a substitution into production.

Design the 1.66 V to 3.465 V supply rails so each port remains within its operating limit under the intended load and startup sequence. Use the datasheet current limits to determine supply capacity and the recommended decoupling values for transient performance. Account for the switching load of all three ports rather than sizing the rail from an idle measurement.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer product page confirms the KSZ8873 family and RLL ordering option, but no explicit RoHS, REACH, halogen-free, or conflict-minerals statements are included in the available records. AEC-Q100 is not applicable because this is a commercial Ethernet switch rather than an automotive-qualified device.

Daten verifiziert am: 2026-11-09 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

KSZ8873RLLU KSZ8873RLLU datasheet KSZ8873RLLU datasheet pdf KSZ8873RLLU pinout KSZ8873RLLU equivalent KSZ8873RLLU replacement KSZ8873RLLU 64-LQFP KSZ8873RLLU vs KSZ8873RLL Microchip KSZ8873RLLU KSZ8873RLLU price KSZ8873RLLU stock KSZ8873 3-port Ethernet switch

Verwandte Bauteile & Begriffe

Microchip Technology KSZ8873RLLU KSZ8873MLL KSZ8873FLL KSZ8873RLL KSZ8873RLLI Ethernet switch Layer 2 switch Ethernet controller 10/100 Base-TX 10 Mbps 100 Mbps IEEE 802.3u I2C SPI 64-LQFP LQFP package family surface mount SMD integrated PHY Ethernet magnetics differential pair controlled impedance 1.66 V to 3.465 V -40°C to +85°C
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen