LC4064B-10T48I - 64-Macrocell 125MHz CPLD | Lattice
Teilenummer: LC4064B-10T48I ✗ AbgekündigtLC4064B-10T48I Übersicht
A CPLD, or Complex Programmable Logic Device, is a programmable-logic semiconductor positioned between fixed-function logic ICs and larger FPGAs. It belongs to the FPGA and CPLD hierarchy, combining nonvolatile in-system programming with a comparatively simple architecture for implementing Boolean logic, counters, state machines, bus decoding, and control functions. The ispMACH 4000B family targets designs requiring fast routing, deterministic control logic, and efficient PCB integration without an external configuration memory.
Key features include 64 macrocells, a 125 MHz operating frequency associated with the 10 ns device grade, 2.5 V operation, and 32 dedicated general-purpose I/O pins plus 4 dedicated inputs. The Lattice family documentation identifies 3.3 V, 2.5 V, and 1.8 V operation across the applicable device families. In-system programmability allows the configuration memory to be rewritten by the host system, supporting production programming, field updates, and logic revision without removing the device from its assembled circuit board.
The 48-pin TQFP package uses a square, gull-wing surface-mount form. Its 48-terminal arrangement supports the mixed signal requirements of a typical control design: programmable I/O, dedicated inputs, power, ground, and configuration or clock-related connections. Because this is a digital programmable-logic IC, no safe-operating-area curve applies. Thermal design instead depends on supply voltage, I/O switching activity, clock activity, board construction, and the package's exposed heat-transfer path through the PCB.
Typical applications include industrial motor sequencing, programmable relay control, instrumentation signal conditioning interfaces, multi-function peripheral controllers, and embedded system bus arbitration. The dedicated inputs can handle fixed control signals while the 32 general-purpose I/O pins are assigned by the CPLD design. The 125 MHz performance class is also appropriate for short control loops and clocked state machines where deterministic timing is more important than the parallel logic capacity of a large FPGA.
Designers should assign pins from the manufacturer pin-description table rather than inferring terminal functions from package position. Configuration pins, dedicated inputs, general-purpose I/O, power, and ground each have distinct requirements, and an incorrect assignment can place a normal operating signal on a configuration function. PCB layout should provide a continuous ground plane, short supply connections, and appropriate decoupling close to the power terminals. Programming should follow the ispMACH 4000 family procedures and use a voltage-compatible programming interface.
Drop-in-Alternativen für LC4064B-10T48I – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit LC4064B-10T48I (gleiche Bauform und Footprint) – abweichend in Core Supply Voltage, Package, Package Type, Product Type, Speed Grade.
LC4064B-10TN48I
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
LC4064V-10T48I
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →LC4064V-10TN48I
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LC4064B-10T48I Grenzwerte & elektrische Eigenschaften
| Device Type | In-System Programmable SuperFAST CPLD |
| Macrocell Count | 64 macrocells |
| Maximum Frequency | 125 MHz |
| Speed Grade | 10 ns |
| Core Supply Voltage | 2.5 V |
| Supported Family Supply Voltages | 1.8 V, 2.5 V, and 3.3 V |
| General-Purpose I/O Count | 32 I/O |
| Dedicated Input Count | 4 inputs |
| Terminal Count | 48 terminals |
| Package Type | TQFP |
| Package Shape | Square |
| Lead Form | Gull wing |
| Montageart | Surface mount |
| Programming Method | In-system programming |
| Logic Architecture | ispMACH 4000B |
| Packaging Form | Tray |
LC4064B-10T48I square Pinbelegungsleitfaden
Pinbelegung für LC4064B-10T48I (square-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für LC4064B-10T48I.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
LC4064B-10T48I ist geeignet für 6 Anwendungs: Industrial Motor and Relay Sequencing, Peripheral Interface Consolidation, Programmable Test and Measurement Front End, Network Interface Control and Bus Decoding, Automotive and Equipment Auxiliary Control, Embedded Configuration and Glue Logic.
Industrial Motor and Relay Sequencing
The LC4064B-10T48I fits centralized sequencing for relays, contactors, solenoids, and motor-control interlocks where deterministic logic is needed. Its 64 macrocells can implement state machines, timers, fault interlocks, and transition sequencing, while the 125 MHz timing class provides ample margin for short control paths. The 32 general-purpose I/O pins connect output-driver controls and status inputs, and the 4 dedicated inputs can handle independent machine-start or safety-interface signals before programmable logic processes them. Use external drivers and protection networks for inductive loads rather than driving load current directly through the CPLD.
Empfohlen
Peripheral Interface Consolidation
The LC4064B-10T48I is useful for consolidating several slow or medium-speed peripheral interfaces into a compact programmable-logic block. Its 64 macrocells can decode addresses, qualify control signals, arbitrate bus access, and generate timing sequences, while 32 general-purpose I/O pins provide connections to external transceivers or standard peripherals. The 10 ns device timing supports a 125 MHz logic class without requiring a large FPGA. Boundary behavior should be implemented with registered logic where possible, and every external signal should be checked against the device's supported voltage and drive limits.
Empfohlen
Programmable Test and Measurement Front End
The LC4064B-10T48I can implement measurement sequencing, signal routing, range selection, and front-panel control in compact instrumentation. Its 64 macrocells accommodate counters, timing gates, command decoders, and status-machinery functions, while the 125 MHz operating class supports clocked acquisition-control logic. The 32 general-purpose I/O pins provide flexible connections to sensors, switches, displays, and converters, and the 4 dedicated inputs support capture or trigger functions. Analog precision is determined by external converters and signal conditioning rather than by the CPLD itself, so sensitive paths should remain short and properly referenced.
Empfohlen
Network Interface Control and Bus Decoding
The LC4064B-10T48I is appropriate for deterministic protocol management, address decoding, interrupt arbitration, and status multiplexing around a network controller. The 64 macrocells support parallel logic engines and registered outputs, while 32 general-purpose I/O pins accommodate data, command, and handshake signals. Its 125 MHz timing class is suitable for clocked control functions, but the device should not be assumed to replace a high-speed FPGA or processor for complex packet processing. Define clock ownership, reset behavior, and asynchronous input synchronization in the design, and follow the manufacturer timing guidance for each selected path.
Empfohlen
Automotive and Equipment Auxiliary Control
The LC4064B-10T48I can implement auxiliary control logic for equipment subsystems where compact nonvolatile programmability and deterministic timing are valuable. Potential functions include status aggregation, lamp and buzzer control, mode selection, watchdog handling, and coordination between a host controller and discrete peripherals. Its 32 general-purpose I/O pins and 4 dedicated inputs provide adequate interface capacity for small control subsystems. The device should not be selected for safety-critical control without confirming its temperature grade, automotive qualification, electrical ratings, and applicable functional-safety requirements in the manufacturer documentation.
Empfohlen
Embedded Configuration and Glue Logic
The LC4064B-10T48I fits embedded systems that need flexible glue logic between a host processor, memory, converters, and external interfaces. In-system programming allows the same board to support multiple configurations, diagnostics, or field revisions without requiring a separate mask-programmed logic device. The 64 macrocells can implement command decoding, interrupt masks, watchdog logic, and peripheral timing, while the 48-pin TQFP package keeps routing manageable. Designers should include an accessible programming interface, define configuration pins and startup behavior carefully, and validate every reprogramming event against the system-state requirements.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für LC4064B-10T48I – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | LC4064B-10TN48I | LC4064V-10T48I | LC4064V-10TN48I |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | TQFP-48 | TQFP-48 | TQFP-48 | TQFP-48 |
| Macrocell Count | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells |
| Maximum Frequency | 125 MHz | 125 MHz | 125 MHz | 125 MHz |
| Speed Grade | 10 ns | 10 ns | 10 ns | 10 ns |
| General-Purpose I/O Count | 32 I/O | 32 I/O | 32 I/O | 32 I/O |
| Dedicated Input Count | 4 inputs | 4 inputs | 4 inputs | 4 inputs |
| Programming Method | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
Wichtigste Unterscheidungsmerkmale
- Matches the 125 MHz timing class while retaining 64 macrocells (vs. LC4064B-10TN48I)
- Provides an established B-grade 2.5 V configuration (vs. LC4064V-10T48I)
- Combines a 48-pin TQFP footprint with 32 general-purpose I/O pins (vs. LC4064V-10TN48I)
Designhinweise
Assign all 48 terminals from the manufacturer pin-description table before routing the PCB. Configuration signals, dedicated inputs, general-purpose I/O, power, and ground are not interchangeable. Place bypass capacitors near the supply terminals, maintain a continuous ground plane, and route the programming interface away from high-current switching paths. Confirm package orientation, pin-one location, and solderable land pattern against the TQFP-48 mechanical drawing before releasing fabrication files.
Design the supply network for the B-grade 2.5 V operating configuration and check every connected I/O against the absolute maximum and voltage-level limits in the manufacturer datasheet. The LC4064B family supports several supply configurations, but that does not mean every I/O pin may be driven or tolerated at every family voltage. Use separate level translation when a peripheral operates outside the CPLD's I/O range. Include bulk and local high-frequency decoupling according to the family reference design and measured switching requirements.
Do not treat an identical package and timing suffix as sufficient proof of interchangeability. Before substituting LC4064B-10TN48I, LC4064V-10T48I, or LC4064V-10TN48I, verify supply voltage, I/O thresholds, configuration-pin behavior, startup timing, temperature grade, programming interface, and lifecycle status. Preserve the original design's unused-pin treatment and configuration safeguards. The family documentation notes pin-oriented migration benefits within the ispMACH 4000 family, but each ordered suffix still requires an engineering review.
Use registered logic for clocked interfaces and define a single clock-domain strategy before assigning the 32 general-purpose I/O pins. Account for setup and hold requirements, clock skew, output loading, and any asynchronous status or interrupt inputs. If an input changes near a clock edge, use synchronization or design-level qualification rather than assuming the nominal 10 ns speed grade resolves metastability. Keep sensitive or high-fanout nets short and avoid routing them adjacent to switching power nodes.
Compliance-Informationen
The component records do not provide a conclusive compliance declaration for this exact orderable MPN. Confirm RoHS, REACH, lead-free, halogen-free, and automotive qualification status with the manufacturer or an authorized supplier before release.