LM224KDRG4 - Quad 36V Op Amp | Texas Instruments
Teilenummer: LM224KDRG4 ✗ AbgekündigtLM224KDRG4 Übersicht
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs. The LM224 belongs to the general-purpose operational-amplifier category within the broader amplifier IC and analog semiconductor hierarchy. Its four amplifier sections share a common supply but operate independently, allowing one compact package to implement four separate gain, buffering, comparison, or active-filter functions. The SOIC surface-mount format also simplifies assembly on conventional through-hole-compatible board outlines.
Each section provides a typical offset voltage of 600 µV, a useful indicator of input-stage imbalance for precision applications. The family’s common-mode input capability extends to ground, which is important in single-supply systems where signal levels may start near 0 V. Operation from a single supply or split supplies supports both industrial control and conventional ±15 V laboratory-style circuitry. Internal frequency compensation removes the need for external compensation components in typical closed-loop amplifier configurations.
The LM224 architecture uses four high-voltage, internally frequency-compensated operational amplifiers in one package. Internal compensation provides stable operation without external network components for conventional voltage-amplifier use. Common-mode operation to ground allows the device to process signals close to the negative supply rail, while the high differential-input capability supports applications that experience larger differential excursions. Exact offset, gain-bandwidth, input-bias-current, output-swing, and temperature limits should be confirmed against the specific LM224KDRG4 manufacturer datasheet before final release.
Typical uses include low-level sensor conditioning, current-loop receivers, panel meters, power-supply feedback loops, and low-frequency active filters. The four independent channels can reduce the number of packages needed when a board implements several analog functions. In battery- or industrial systems, the high-voltage supply capability helps simplify input-stage design, although supply-current consumption and output-drive requirements still need to be checked against the circuit’s operating conditions.
A key implementation consideration is that this exact LM224KDRG4 order code is discontinued. New designs should evaluate the current LM224 family options listed on the Texas Instruments product page and confirm lifecycle status, temperature grade, order-code suffix, and availability before committing to a PCB release. Do not assume that a similarly named SOIC device has identical electrical limits or pin functionality.
This product record combines the exact package and lifecycle information with practical guidance for evaluating the LM224 family. It also distinguishes function-level family options from pin-compatible replacements and highlights the checks required when redesigning around a discontinued four-channel amplifier.
Drop-in-Alternativen für LM224KDRG4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit LM224KDRG4 (gleiche Bauform und Footprint) – abweichend in Package, Maximum Supply Voltage, Product Type.
LM224KADRG4
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
LM224DRG4
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LM224DRG3
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LM224ADT
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LM324DRG4
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →LM2902DRG4
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →LM224KDRG4 Grenzwerte & elektrische Eigenschaften
| Number of Amplifier Channels | 4 channels |
| Maximum Supply Voltage | 36 V |
| Typical Input Offset Voltage | 600 µV |
| Input Common-Mode Range | Extends to ground |
| Differential Input Capability | High differential input voltage capability |
| Frequency Compensation | Internal frequency compensation |
| Supply Configuration | Single supply or split supply |
| Product Type | Quadruple general-purpose operational amplifier |
| Gehäuse | 14-SOIC |
| Package Code | SOP |
| Package Shape | Rectangular |
| Terminal Form | Gull wing |
| Number of Terminals | 14 terminals |
| Montageart | Surface mount |
LM224KDRG4 rectangular Pinbelegungsleitfaden
Pinbelegung für LM224KDRG4 (rectangular-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für LM224KDRG4.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
LM224KDRG4 ist geeignet für 6 Anwendungs: Industrial Sensor Signal Conditioning, Power Supply Feedback Control, Current-Loop Receiver Amplifier, Low-Frequency Active Filters, Data Acquisition Front End, Audio and Communication Interface Buffering.
Industrial Sensor Signal Conditioning
The Texas Instruments LM224KDRG4 fits four-channel sensor conditioning when signals can approach ground and the circuit operates from a single supply. Its common-mode input range extending to ground is especially useful for pressure, temperature, and position sensors whose output starts near 0 V. Four internally compensated sections can amplify or buffer two differential inputs or provide four single-ended channels in one 14-SOIC package. The 36 V maximum supply rating accommodates protected industrial interfaces, but the selected order code’s temperature grade and actual input range must cover the enclosure environment.
Empfohlen
Power Supply Feedback Control
The LM224KDRG4 can implement error amplifiers and output-feedback paths in regulated power-supply designs because it contains four high-gain, internally compensated amplifier sections. Its common-mode capability reaching ground is useful when the feedback reference or sensed voltage operates near the negative rail. The 36 V supply class allows the amplifier to operate from a higher auxiliary rail than a conventional low-voltage op amp. Designers should still verify loop stability, output swing, load capability, and supply-current effects at the actual output voltage and switching frequency.
Empfohlen
Current-Loop Receiver Amplifier
The LM224KDRG4 is suitable for 4–20 mA current-loop receivers that require amplification of a small signal riding on a substantial common-mode voltage. The amplifier family supports operation from a single supply and common-mode input extension to ground, allowing a receiver to be implemented with less front-end complexity than a general low-voltage amplifier. Its four channels can also form complete analog input/output blocks around a controller. The input protection network, isolation requirements, output range, and burden voltage must be designed together so the chosen temperature grade and supply limits remain valid.
Empfohlen
Low-Frequency Active Filters
The LM224KDRG4 can realize low-frequency active-filter stages because each of its four sections is a high-gain, internally frequency-compensated operational amplifier. Multiple stages can be assembled for low-pass, high-pass, or band-pass networks without allocating a separate package for every amplifier. Internal compensation removes the need for external compensation in conventional closed-loop configurations, simplifying the first design pass. Component tolerances, op-amp gain-bandwidth behavior, output loading, and supply noise remain important when defining the filter response and usable frequency range.
Empfohlen
Data Acquisition Front End
The four channels in the LM224KDRG4 can provide useful buffer, gain, and summing functions ahead of an analog-to-digital converter in a data-acquisition system. A common package reduces board area when several low-frequency analog channels must be processed close to the converter. Common-mode input operation extending to ground is valuable for zero-based sensor ranges. The design should account for the ADC input range, op-amp output swing, settling requirements, source impedance, channel-to-channel matching, and any anti-alias or protection components ahead of the amplifier inputs.
Empfohlen
Audio and Communication Interface Buffering
The LM224KDRG4 can provide low-frequency buffering and gain stages in audio, communication, and control interfaces where low cost and multi-channel consolidation are priorities. Four amplifier sections support several modest-bandwidth signal paths without requiring four separate packages, while the 36 V supply class provides headroom for legacy interface circuits. It is not a precision low-noise audio amplifier, so the application should meet the acceptable noise, distortion, slew-rate, and bandwidth requirements. Confirm output-drive capability into the next stage and provide stable reference paths for AC-coupled inputs.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für LM224KDRG4 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | LM224KADRG4 | LM224DRG4 | LM224DRG3 | LM224ADT | LM2902DRG4 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Amplifier Channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Maximum Supply Voltage | 36 V | 36 V | 36 V | 36 V | 36 V | 36 V |
| Frequency Compensation | Internal | Internal | Internal | Internal | Internal | Internal |
| Product Family | LM224 general-purpose operational amplifier | LM224 | LM224 | LM224 | LM224 | LM2902 |
Wichtigste Unterscheidungsmerkmale
- Direct LM224-family functional continuity (vs. LM224DRG4)
- Four channels reduce package count (vs. LM324DRG4)
- Ground-referenced common-mode operation (vs. LM2902DRG4)
Designhinweise
Do not treat every 14-SOIC quad op amp as interchangeable with the LM224KDRG4. Confirm the pin description, supply rating, common-mode range, output swing, input bias current, and temperature grade for the exact replacement. In particular, the LM224 family reaches a 36 V maximum supply, while some similarly packaged general-purpose alternatives have lower limits. Review the manufacturer pin table and electrical characteristics together before transferring the footprint.
The amplifier’s quiescent current contributes to total supply demand in every channel, so four active sections can multiply the per-amplifier current by four. Estimate worst-case supply current using the selected order code’s maximum quiescent current and output-current conditions. Provide local input and output bypassing, and verify that the upstream regulator can support the amplifier load plus transient current generated by capacitive inputs and capacitive loads.
Place the op amp, feedback components, and input or output bypass capacitors close to their associated pins to reduce parasitic feedback and coupling. Keep sensitive input traces away from high-current switching paths and provide a solid ground reference for all four amplifier sections. Because the package contains independent amplifiers but shares supply pins, route each section’s compensation path and sensitive feedback loop locally rather than allowing them to cross beneath unrelated channels.
Compliance-Informationen
The exact LM224KDRG4 order code is discontinued. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact order code and remaining supply channel.