הודעת רכישה אחרונה: LM224KDRG4 מתקרב לסוף חיי המוצר. תאריך הזמנה אחרון: צור קשר. צפייה בחלקים חלופיים זמינים →
Texas Instruments

LM224KDRG4 - Quad 36V Op Amp | Texas Instruments

MPN: LM224KDRG4 ✗ סוף ייצור
36 V Vdss 14-SOIC Package Internal frequency compensation Speed
כמות הזמנה מינימלית: 1 |

LM224KDRG4 סקירה

The Texas Instruments LM224KDRG4 is a discontinued quadruple operational amplifier built around four general-purpose, internally compensated high-gain amplifier sections in a 14-pin SOIC package. The LM224 family supports high-voltage operation up to 36 V, provides a typical offset voltage of 600 µV, permits common-mode input ranges that extend to ground, and offers high differential-input-voltage capability. These characteristics make it suitable for industrial signal conditioning, power-supply control, transducer interfaces, and general-purpose analog circuits.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its two inputs. The LM224 belongs to the general-purpose operational-amplifier category within the broader amplifier IC and analog semiconductor hierarchy. Its four amplifier sections share a common supply but operate independently, allowing one compact package to implement four separate gain, buffering, comparison, or active-filter functions. The SOIC surface-mount format also simplifies assembly on conventional through-hole-compatible board outlines.

Each section provides a typical offset voltage of 600 µV, a useful indicator of input-stage imbalance for precision applications. The family’s common-mode input capability extends to ground, which is important in single-supply systems where signal levels may start near 0 V. Operation from a single supply or split supplies supports both industrial control and conventional ±15 V laboratory-style circuitry. Internal frequency compensation removes the need for external compensation components in typical closed-loop amplifier configurations.

The LM224 architecture uses four high-voltage, internally frequency-compensated operational amplifiers in one package. Internal compensation provides stable operation without external network components for conventional voltage-amplifier use. Common-mode operation to ground allows the device to process signals close to the negative supply rail, while the high differential-input capability supports applications that experience larger differential excursions. Exact offset, gain-bandwidth, input-bias-current, output-swing, and temperature limits should be confirmed against the specific LM224KDRG4 manufacturer datasheet before final release.

Typical uses include low-level sensor conditioning, current-loop receivers, panel meters, power-supply feedback loops, and low-frequency active filters. The four independent channels can reduce the number of packages needed when a board implements several analog functions. In battery- or industrial systems, the high-voltage supply capability helps simplify input-stage design, although supply-current consumption and output-drive requirements still need to be checked against the circuit’s operating conditions.

A key implementation consideration is that this exact LM224KDRG4 order code is discontinued. New designs should evaluate the current LM224 family options listed on the Texas Instruments product page and confirm lifecycle status, temperature grade, order-code suffix, and availability before committing to a PCB release. Do not assume that a similarly named SOIC device has identical electrical limits or pin functionality.

This product record combines the exact package and lifecycle information with practical guidance for evaluating the LM224 family. It also distinguishes function-level family options from pin-compatible replacements and highlights the checks required when redesigning around a discontinued four-channel amplifier.

חלופות תחליף ישיר עבור LM224KDRG4 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LM224KDRG4 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Maximum Supply Voltage, Product Type.

Texas Instruments
Package: SOIC-14 (D)
Maximum Supply Voltage: 26 V
השווה עם LM224KDRG4 →
Texas Instruments
Product Type: Quad general-purpose operational amplifier
השווה עם LM224KDRG4 →

LM224KADRG4

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 14-SOIC
Same four-channel LM224 architecture, 14-SOIC footprint, 36 V supply class, and 600 µV typical offset; channel count and package-pin count differ by 0%

📋 חלופה להתייחסות (לא בקטלוג)

LM224DRG4

✅ Drop-In
📦 14-SOIC
Same four-channel LM224 architecture and 14-SOIC footprint; listed operating-frequency rating of 1.2 MHz matches the LM224KAD family reference, a 0% channel-count difference

📋 חלופה להתייחסות (לא בקטלוג)

LM224DRG3

✅ Drop-In
📦 14-SOIC
Same four-channel LM224 family and 14-SOIC pin arrangement; amplifier-channel count is unchanged and package-pin count differs by 0%

📋 חלופה להתייחסות (לא בקטלוג)

LM224ADT

✅ Drop-In
📦 14-SOIC
Same four-amplifier LM224 configuration and 14-SOIC footprint; channel count differs by 0%, while the order code specifies a different temperature-grade configuration

📋 חלופה להתייחסות (לא בקטלוג)

LM324DRG4

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 14-SOIC
Quad general-purpose operational amplifier · 4 channels · 1.2 MHz · 14-SOIC · 14 pins · Surface mount · Single supply or split supply · Independent, high-gain, frequency-compensated amplifiers

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM2902DRG4

✅ Drop-In ⚠️ מפרטים לא מאומתים
Texas Instruments
📦 14-SOIC
4 channels · 26 V · 1.2 MHz · 2 mV · 50 dB · 0.8 mA · 26 V · +13 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LM224KDRG4 דירוגים מרביים ומאפיינים חשמליים

Number of Amplifier Channels 4 channels
Maximum Supply Voltage 36 V
Typical Input Offset Voltage 600 µV
Input Common-Mode Range Extends to ground
Differential Input Capability High differential input voltage capability
Frequency Compensation Internal frequency compensation
Supply Configuration Single supply or split supply
Product Type Quadruple general-purpose operational amplifier
מארז 14-SOIC
Package Code SOP
Package Shape Rectangular
Terminal Form Gull wing
Number of Terminals 14 terminals
סוג הרכבה Surface mount

מדריך תצורת פינים של LM224KDRG4 rectangular

תצורת פינים עבור LM224KDRG4 (מארזת rectangular). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת rectangular עבור LM224KDRG4

אין נתוני פריסת פינים מפורטים עבור LM224KDRG4.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LM224KDRG4 מתאים עבור 6 יישוםs: Industrial Sensor Signal Conditioning, Power Supply Feedback Control, Current-Loop Receiver Amplifier, Low-Frequency Active Filters, Data Acquisition Front End, Audio and Communication Interface Buffering.

🏭

Industrial Sensor Signal Conditioning

The Texas Instruments LM224KDRG4 fits four-channel sensor conditioning when signals can approach ground and the circuit operates from a single supply. Its common-mode input range extending to ground is especially useful for pressure, temperature, and position sensors whose output starts near 0 V. Four internally compensated sections can amplify or buffer two differential inputs or provide four single-ended channels in one 14-SOIC package. The 36 V maximum supply rating accommodates protected industrial interfaces, but the selected order code’s temperature grade and actual input range must cover the enclosure environment.

⚡

Power Supply Feedback Control

The LM224KDRG4 can implement error amplifiers and output-feedback paths in regulated power-supply designs because it contains four high-gain, internally compensated amplifier sections. Its common-mode capability reaching ground is useful when the feedback reference or sensed voltage operates near the negative rail. The 36 V supply class allows the amplifier to operate from a higher auxiliary rail than a conventional low-voltage op amp. Designers should still verify loop stability, output swing, load capability, and supply-current effects at the actual output voltage and switching frequency.

🏭

Current-Loop Receiver Amplifier

The LM224KDRG4 is suitable for 4–20 mA current-loop receivers that require amplification of a small signal riding on a substantial common-mode voltage. The amplifier family supports operation from a single supply and common-mode input extension to ground, allowing a receiver to be implemented with less front-end complexity than a general low-voltage amplifier. Its four channels can also form complete analog input/output blocks around a controller. The input protection network, isolation requirements, output range, and burden voltage must be designed together so the chosen temperature grade and supply limits remain valid.

🔧

Low-Frequency Active Filters

The LM224KDRG4 can realize low-frequency active-filter stages because each of its four sections is a high-gain, internally frequency-compensated operational amplifier. Multiple stages can be assembled for low-pass, high-pass, or band-pass networks without allocating a separate package for every amplifier. Internal compensation removes the need for external compensation in conventional closed-loop configurations, simplifying the first design pass. Component tolerances, op-amp gain-bandwidth behavior, output loading, and supply noise remain important when defining the filter response and usable frequency range.

📟

Data Acquisition Front End

The four channels in the LM224KDRG4 can provide useful buffer, gain, and summing functions ahead of an analog-to-digital converter in a data-acquisition system. A common package reduces board area when several low-frequency analog channels must be processed close to the converter. Common-mode input operation extending to ground is valuable for zero-based sensor ranges. The design should account for the ADC input range, op-amp output swing, settling requirements, source impedance, channel-to-channel matching, and any anti-alias or protection components ahead of the amplifier inputs.

🌐

Audio and Communication Interface Buffering

The LM224KDRG4 can provide low-frequency buffering and gain stages in audio, communication, and control interfaces where low cost and multi-channel consolidation are priorities. Four amplifier sections support several modest-bandwidth signal paths without requiring four separate packages, while the 36 V supply class provides headroom for legacy interface circuits. It is not a precision low-noise audio amplifier, so the application should meet the acceptable noise, distortion, slew-rate, and bandwidth requirements. Confirm output-drive capability into the next stage and provide stable reference paths for AC-coupled inputs.

סיכום מוצרים מומלצים

LM224KADRG4 Same-family four-channel signal-conditioning option בשימוש ב-: Industrial Sensor Signal Conditioning, Current-Loop Receiver Amplifier, Audio and Communication Interface Buffering LM224DRG4 LM224-family conditioning amplifier בשימוש ב-: Industrial Sensor Signal Conditioning, Power Supply Feedback Control, Low-Frequency Active Filters LM2902DRG4 Texas Instruments בשימוש ב-: Industrial Sensor Signal Conditioning, Power Supply Feedback Control, Current-Loop Receiver Amplifier, Data Acquisition Front End LM324DRG4 Texas Instruments בשימוש ב-: Power Supply Feedback Control, Low-Frequency Active Filters, Audio and Communication Interface Buffering LM224ADT LM224-family temperature-grade alternative בשימוש ב-: Current-Loop Receiver Amplifier, Audio and Communication Interface Buffering LM224DRG3 LM224-family active-filter option בשימוש ב-: Low-Frequency Active Filters ADS8519IDB Texas Instruments בשימוש ב-: Data Acquisition Front End ADS1262IPW Texas Instruments בשימוש ב-: Data Acquisition Front End
Where can I download the LM224KDRG4 datasheet PDF?
The LM224KDRG4 datasheet is available through the Texas Instruments LM224 product page linked on this record. The document describes the four-channel general-purpose operational amplifier, its 36 V maximum supply operation, typical 600 µV offset voltage, common-mode input range extending to ground, and the 14-SOIC package. Use the manufacturer datasheet for the definitive ordering-code, pinout, electrical-limit, and test-condition tables before placing the part in a new design.
What is the LM224KDRG4?
The LM224KDRG4 is a Texas Instruments quadruple general-purpose operational amplifier with four independent amplifier sections in a 14-SOIC package. According to the manufacturer datasheet, the LM224 family supports supply voltages up to 36 V, has a typical input offset voltage of 600 µV, permits common-mode inputs extending to ground, and uses internal frequency compensation. It can operate from a single supply or from split supplies for conventional industrial and instrumentation circuits.
Is the LM224KDRG4 still active?
No. The LM224KDRG4 is discontinued and is identified as no longer carried by DigiKey. Texas Instruments continues to describe the LM224 family and related order codes on its product page, but the exact LM224KDRG4 lifecycle status should be treated as end-of-life. For a new production design, review current LM224 order options and confirm temperature grade, package, qualification requirements, and supply status before schematic release.
What is the LM224KDRG4 pinout?
The LM224KDRG4 uses a 14-SOIC package containing four operational amplifiers. Assign PCB tracks from the pin-description and typical-application tables in the Texas Instruments LM224 datasheet rather than relying only on the general SOIC footprint. Confirm the exact order-code suffix and exposed functions before layout because similar LM224 order codes can differ by temperature grade, qualification, or packaging attributes.
Where can I buy the LM224KDRG4 online?
Use the Request a Quote form on this page to request LM224KDRG4 availability, minimum order quantity, lead time, and a formal quotation. Because this exact order code is discontinued, the outcome may depend on remaining factory stock, approved supply channels, or an authorized sourcing program. Provide the target quantity, date code requirements, and whether unused original packaging is acceptable when submitting the request.
What is the price of the LM224KDRG4?
The current commercial terms for LM224KDRG4 should be requested through the Request a Quote form on this page. The exact device is discontinued, so availability may be limited and quotations can depend on quantity, traceability requirements, date code, storage condition, and whether an exact original part is required. The platform manages the displayed commercial information separately from the technical specifications, so no static unit price should be assumed from this page.
What is the lead time for LM224KDRG4?
The lead time for LM224KDRG4 must be confirmed for the requested quantity through the Request a Quote form on this page. Because the exact MPN is discontinued, standard lead-time guidance for active components may not apply. Include the annual usage forecast, required date-code range, inspection criteria, and acceptable alternative order codes in the request when negotiating supply continuity.
Is LM224KDRG4 in stock?
Stock for LM224KDRG4 is not represented by a fixed inventory status because the exact device is discontinued and channel availability can change rapidly. Submit a Request a Quote on this page with your required quantity and traceability requirements. The sourcing response should confirm allocation, date code, packaging condition, and estimated delivery schedule for the specific request.
What can replace the LM224KDRG4?
The closest drop-in candidates are LM224KADRG4, LM224DRG4, LM224DRG3, LM224ADT, LM324DRG4, and LM2902DRG4, provided their exact temperature grade and qualification requirements match the application. All use a 14-pin SOIC format and provide four amplifier sections, but supply-voltage and electrical-limit differences must be reviewed before substitution. LM224 family options generally preserve the original architecture more closely than LM324 or LM2902 alternatives.
Can LM224KDRG4 be replaced by LM324 or LM2902?
LM324DRG4 and LM2902DRG4 can be considered because they provide four amplifiers in a 14-SOIC package, but they are not unconditional substitutes. The LM324DRG4 has a lower maximum supply rating than the 36 V LM224 family, while LM2902DRG4 is a dual-source-related variant with its own ordering, qualification, and temperature requirements. Compare input common-mode range, output swing, supply current, offset, bandwidth, and noise before approving either replacement.
When should I choose LM224KDRG4 over LM224DRG4?
Choose the exact LM224KDRG4 only when its original temperature grade, qualification, and sourcing conditions are required by an existing design. For new industrial or instrumentation equipment, compare LM224DRG4 and LM224KADRG4 against the required ambient-temperature range and qualification regime. The amplifier functions are closely related, but order-code suffixes can impose different temperature, packaging, or automotive requirements that are not visible from the 14-SOIC footprint alone.
Is the LM224KDRG4 suitable for single-supply sensor interfaces?
The LM224KDRG4 is suitable for many single-supply sensor interfaces because its common-mode input range extends to ground and its four channels can condition several signals in one package. The actual sensor output must remain inside the complete input and output ranges at the selected supply voltage. Check offset, input-bias current, output swing, noise, and stability with the sensor source impedance, and verify the selected temperature grade before release.
What are the key specifications of LM224KDRG4 that engineers should know?
The principal characteristics are four general-purpose amplifier channels, operation from a single or split supply, a 36 V maximum supply voltage, a typical 600 µV input offset, common-mode input capability extending to ground, internal frequency compensation, and a 14-SOIC package. The manufacturer datasheet remains the controlling source for gain-bandwidth, bias current, output swing, thermal limits, and exact order-code attributes.
LM224KDRG4 vs LM224KADRG4 - which is better for industrial control?
Both devices are 14-SOIC, four-channel general-purpose operational amplifiers in the same LM224 family, so the correct choice depends primarily on the exact order-code attributes and operating requirements. Compare LM224KDRG4 with LM224KADRG4 for temperature range, qualification, supply-voltage limits, and lifecycle status. For industrial control, select the part whose specified limits cover the ambient range, noise environment, and production qualification requirements.
What is the best Analog Devices equivalent for LM224KDRG4?
The appropriate Analog Devices equivalent depends on the required amplifier architecture, temperature grade, supply rating, and exact 14-SOIC pinout. Cross-reference listings for LM224 identify an Analog Devices candidate, but the manufacturer part number and pin compatibility must be confirmed in the relevant component data before substitution. Do not approve a cross-brand device based only on a generic operational-amplifier description.

נתוני עזר הנדסיים עבור LM224KDRG4 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the LM224KDRG4 when maintaining an existing 14-SOIC, four-channel general-purpose amplifier design requires the original LM224 architecture, 36 V supply class, and specified order-code grade. For new production, prefer LM224KADRG4, LM224DRG4, or LM224DRG3 when one of those exact suffixes satisfies the required temperature range, qualification, sourcing, and lifecycle needs. LM224ADT is another same-family 14-SOIC option, but its temperature-grade and order-code attributes must be checked. Consider LM2902DRG4 for a related four-channel 36 V-class implementation, and LM324DRG4 only after confirming that its lower supply rating, electrical limits, and noise requirements are acceptable. For every option, verify the manufacturer pin table and account for input common-mode range, output swing, supply current, temperature, and qualification before approving a drop-in substitution.

השוואה עם חלופות

פרמטר מוצר זה LM224KADRG4 LM224DRG4 LM224DRG3 LM224ADT LM2902DRG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Amplifier Channels 4 channels 4 channels 4 channels 4 channels 4 channels 4 channels
Maximum Supply Voltage 36 V 36 V 36 V 36 V 36 V 36 V
Frequency Compensation Internal Internal Internal Internal Internal Internal
Product Family LM224 general-purpose operational amplifier LM224 LM224 LM224 LM224 LM2902

מבדילים עיקריים

  • Direct LM224-family functional continuity (לעומתLM224DRG4)
  • Four channels reduce package count (לעומתLM324DRG4)
  • Ground-referenced common-mode operation (לעומתLM2902DRG4)

הערות תכנון

Do not treat every 14-SOIC quad op amp as interchangeable with the LM224KDRG4. Confirm the pin description, supply rating, common-mode range, output swing, input bias current, and temperature grade for the exact replacement. In particular, the LM224 family reaches a 36 V maximum supply, while some similarly packaged general-purpose alternatives have lower limits. Review the manufacturer pin table and electrical characteristics together before transferring the footprint.

The amplifier’s quiescent current contributes to total supply demand in every channel, so four active sections can multiply the per-amplifier current by four. Estimate worst-case supply current using the selected order code’s maximum quiescent current and output-current conditions. Provide local input and output bypassing, and verify that the upstream regulator can support the amplifier load plus transient current generated by capacitive inputs and capacitive loads.

Place the op amp, feedback components, and input or output bypass capacitors close to their associated pins to reduce parasitic feedback and coupling. Keep sensitive input traces away from high-current switching paths and provide a solid ground reference for all four amplifier sections. Because the package contains independent amplifiers but shares supply pins, route each section’s compensation path and sensitive feedback loop locally rather than allowing them to cross beneath unrelated channels.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The exact LM224KDRG4 order code is discontinued. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact order code and remaining supply channel.

חיפושים קשורים

LM224KDRG4 datasheet LM224KDRG4 datasheet pdf LM224KDRG4 pinout LM224KDRG4 specifications LM224KDRG4 equivalent LM224KDRG4 replacement LM224KDRG4 cross reference LM224KDRG4 vs LM224DRG4 LM224KDRG4 price LM224KDRG4 stock Texas Instruments LM224KDRG4 LM224KDRG4 14-SOIC

רכיבים ומונחים קשורים

Texas Instruments LM224KDRG4 LM224KADRG4 LM224DRG4 LM224DRG3 LM224ADT LM324DRG4 LM2902DRG4 operational amplifier general-purpose op amp quad operational amplifier analog integrated circuit amplifier IC semiconductor single-supply operation split-supply operation input offset voltage common-mode input range internal frequency compensation 14-SOIC SOIC package family surface-mount package industrial signal conditioning power-supply feedback control
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר