Texas Instruments

LM2506SQ - 320 Mbps Pixel Link Serializer | Texas Instruments

Teilenummer: LM2506SQ ✓ Aktiv
2.5 V to 6.5 V Vdss 1.5 A Id 40-WQFN, 5 x 5 mm Package
MOQ: 1 |

LM2506SQ Übersicht

Texas Instruments LM2506SQ is a 320 Mbps Low Power Mobile Pixel Link serializer/deserializer for 18-bit RGB display data, packaged in a 40-WQFN 5 x 5 mm surface-mount package. The device provides 22 serialized inputs and 3 deserialized outputs, linking a graphics source to a display panel over a compact differential interface. Its operating supply range is 2.5 V to 6.5 V, and the LM2506 family is designed for low-power mobile display systems.

A Mobile Pixel Link serializer/deserializer is a display-interface IC that converts parallel pixel data into a high-speed serial link and reconstructs parallel data at the receiving endpoint. It belongs to the serializer/deserializer class within interface ICs and system-level display transport. The Mobile Pixel Link architecture reduces the number of PCB signal traces required between a graphics engine and display, which is especially useful where connector count, board area, EMI control, and power efficiency are important.

The LM2506SQ supports data rates up to 320 Mbps and is intended for 18-bit RGB display interfaces. Its low-power design targets compact embedded and mobile equipment rather than general-purpose storage or networking links. The 40-WQFN package provides a dense surface-mount footprint, while the serializer/deserializer arrangement allows display data to be transmitted over fewer conductors than a conventional parallel RGB bus.

Operation from 2.5 V to 6.5 V permits integration with common embedded display systems that use either 3.3 V or 5 V signaling environments. The manufacturer datasheet is the controlling document for timing, electrical limits, initialization, color mapping, and pin-level implementation. Engineers should treat the specified clocking, lane timing, power sequencing, and display timing values as mandatory constraints rather than infer them from the 320 Mbps headline rate.

Typical uses include small-format LCD and OLED panels, portable instruments, industrial human-machine interfaces, automotive display modules, medical monitoring displays, and compact embedded systems. The LM2506SQ is most appropriate when both ends of the link can be configured for Mobile Pixel Link and when reduced trace count is more valuable than retaining a wide parallel RGB interface.

A critical design step is verifying the complete panel-side connection, including supply sequencing, clock source, ground distribution, differential pair routing, and display timing initialization. Route high-speed links on a continuous reference plane, maintain the manufacturer-recommended spacing, and avoid introducing stubs or test-point discontinuities that can degrade signal integrity.

This page combines the LM2506 interface characteristics, verified package and rate details, same-family replacement options, comparison parameters, and practical PCB guidance to support faster component selection and board design.

Drop-in-Alternativen für LM2506SQ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LM2506SQ (gleiche Bauform und Footprint) – abweichend in Interface, Package, Product Type, Supply Voltage Range.

Texas Instruments
Interface: PMBus-compliant SMBus/I2C
Package: 24-pin WQFN (NHZ), 4 mm x 5 mm
Product Type: Hot-swap controller with PMBus

LM2506SQ/NOPB

✅ Drop-In
📦 40-WQFN (5 x 5 mm)
Same 320 Mbps rate, 22/3 serializer-deserializer configuration, and 40-WQFN footprint; ordering suffix differs by 0% in listed key parameters.

📋 Referenzalternative (nicht im Katalog)

LM2506SQX/NOPB

✅ Drop-In
📦 40-WQFN (5 x 5 mm)
Same 320 Mbps rate, 22/3 serializer-deserializer configuration, and 40-WQFN footprint; X ordering suffix differs with 0% change in listed key parameters.

📋 Referenzalternative (nicht im Katalog)

LM25066PSQ/NOPB

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 40-WQFN (5 x 5 mm)
Hot-swap controller with PMBus · 2.9 V to 17 V · 5.8 mA · PMBus-compliant SMBus/I2C · 24-pin WQFN (NHZ), 4 mm x 5 mm · Yes, package identified as WQFN-24-EP (4x5) by distributor data · Base stations, networking line cards, servers · System power management and protection IC

Preis auf Anfrage

Datenblatt ansehen →

LM2506X

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 40-WQFN (5 x 5 mm)
Same-family ordering variant with the same 320 Mbps interface and 40-WQFN footprint; listed key parameters differ by 0%, with suffix-specific packing details requiring confirmation.

📋 Referenzalternative (nicht im Katalog)

LM2506X/NOPB

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 40-WQFN (5 x 5 mm)
Same-family NOPB ordering variant retaining the 320 Mbps interface and 40-WQFN footprint; listed key parameters differ by 0%, while finish and packing details require confirmation.

📋 Referenzalternative (nicht im Katalog)

LM2506SQ Technische Daten

Product Type Serializer/Deserializer
Schnittstelle Low Power Mobile Pixel Link (MPL) Level 0
Maximum Data Rate 320 Mbps
Pixel Data Format 18-bit RGB
Serializer Inputs 22 inputs
Deserializer Outputs 3 outputs
Supply Voltage Range 2.5 V to 6.5 V
Maximaler Ausgangsstrom 1.5 A
Maximum Power Dissipation 15 W
Gehäuse 40-WQFN, 5 x 5 mm
Montageart Surface Mount

LM2506SQ 40-wqfn, 5 x 5 mm Pinbelegungsleitfaden

Pinbelegung für LM2506SQ (40-wqfn, 5 x 5 mm-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für LM2506SQ im 40-wqfn, 5 x 5 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für LM2506SQ.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

LM2506SQ ist geeignet für 6 Anwendungs: Compact Embedded LCD, Portable Medical Monitor, Industrial Human-Machine Interface, Automotive Display Module, Portable Instrument Display, Embedded OLED Control Board.

📺

Compact Embedded LCD

The LM2506SQ fits a compact embedded LCD when the controller and panel support 18-bit RGB Mobile Pixel Link Level 0 signaling. Its 320 Mbps maximum data rate and 22 serializer inputs move the display connection toward a compact high-speed link, reducing the number of parallel RGB traces that must cross the PCB. The 2.5 V to 6.5 V supply range also accommodates common embedded supply rails. The trade-off is endpoint dependence: both the graphics source and display receiver must use compatible clocking, initialization, and timing. Panel timing, lane routing, and refresh-rate requirements should therefore be confirmed before committing to the device.

💊

Portable Medical Monitor

The LM2506SQ can support a portable medical-monitor display when its interface matches the selected panel and the product requires a compact PCB interconnect. Supporting up to 320 Mbps and 18-bit RGB provides sufficient transport capability for many embedded display timing schemes while avoiding the routing burden of a full parallel bus. The 2.5 V to 6.5 V operating range simplifies integration with common embedded power systems. Medical suitability still depends on the complete system risk assessment, electrical-safety requirements, electromagnetic compatibility, and the manufacturer qualification status applicable to the exact ordering code.

🏭

Industrial Human-Machine Interface

The LM2506SQ is appropriate for an industrial human-machine interface when the display controller supports Mobile Pixel Link Level 0 and the panel operates within the device's environmental limits. The 320 Mbps rate supports high-speed serialized transport, while 22 serializer inputs and 3 deserializer outputs match the LM2506 interface organization. Using a serial display link can reduce connector density and improve PCB routing flexibility in space-constrained control panels. The implementation must preserve signal integrity on the high-speed links, provide a continuous reference plane, and follow the manufacturer power-up and initialization sequence. Industrial qualification and long-term availability must be confirmed for the selected suffix.

🚗

Automotive Display Module

🔋

Portable Instrument Display

The LM2506SQ is suitable for a portable instrument display when the selected controller supports 18-bit RGB Mobile Pixel Link and board space or connector density is the main constraint. A 320 Mbps serial link can replace a wider parallel pixel route, helping reduce conductor count and simplify multilayer routing around batteries, analog sections, and communication circuitry. Its 2.5 V to 6.5 V supply range allows use with common embedded rails, although power sequencing and decoupling should follow the manufacturer recommendations. For battery-powered equipment, evaluate complete display power consumption rather than assuming the low-power interface designation alone determines the system's energy budget.

🖥️

Embedded OLED Control Board

The LM2506SQ can serve an embedded OLED control board when the graphic controller and panel use compatible Mobile Pixel Link timing and the required pixel depth is supported. Its 18-bit RGB capability and 320 Mbps interface rate provide a focused transport function for compact color displays. The 40-WQFN footprint reduces board area but demands careful escape routing, exposed-pad thermal handling, and assembly process control. Engineers should verify the panel's initialization requirements, supported timing range, and color mapping before selecting the IC. The design must also separate noisy display and switching-power paths from sensitive analog areas while maintaining a continuous return path beneath the high-speed link.

Zusammenfassung der empfohlenen Produkte

LM2506SQ Texas Instruments Verwendet in: Compact Embedded LCD, Portable Medical Monitor, Industrial Human-Machine Interface, Automotive Display Module, Portable Instrument Display, Embedded OLED Control Board LM2506SQ/NOPB Same-family ordering alternative Verwendet in: Compact Embedded LCD, Portable Instrument Display LM2506X/NOPB Same-family ordering option for design review Verwendet in: Portable Medical Monitor LM2506 Base-family ordering option Verwendet in: Industrial Human-Machine Interface LM2506SQX/NOPB Same-family ordering alternative Verwendet in: Automotive Display Module LM2506X Same-family ordering option Verwendet in: Embedded OLED Control Board
What is the LM2506SQ?
The LM2506SQ is a 320 Mbps Low Power Mobile Pixel Link serializer/deserializer for 18-bit RGB display data. According to the National Semiconductor LM2506 datasheet, it provides 22 serializer inputs and 3 deserializer outputs in a 40-WQFN 5 x 5 mm package. It is designed for compact embedded display systems where replacing a broad parallel RGB connection with a high-speed serial link reduces board routing requirements.
What are the key specifications of LM2506SQ that engineers should know?
The LM2506SQ combines a 320 Mbps maximum data rate, 18-bit RGB pixel support, 22 serializer inputs, and 3 deserializer outputs in a 40-WQFN package. Its stated operating supply range is 2.5 V to 6.5 V. According to the National Semiconductor LM2506 datasheet, the Mobile Pixel Link Level 0 interface is intended to reduce connection complexity in low-power mobile display applications while retaining parallel pixel functionality at the system interface.
Where can I download the LM2506SQ datasheet PDF?
The LM2506SQ datasheet PDF can be obtained from the National Semiconductor LM2506 document listed on this page. It describes the 320 Mbps Mobile Pixel Link interface, 18-bit RGB operation, 2.5 V to 6.5 V supply range, electrical characteristics, and the 40-WQFN connection information. Use the manufacturer document for final pin assignments, timing values, and initialization requirements before releasing a PCB layout.
Where can I find the LM2506SQ pinout?
The LM2506SQ pinout is found in the connection diagram and pin-description tables of the National Semiconductor LM2506 datasheet. The component uses a 40-WQFN 5 x 5 mm package. Use that diagram to identify power, ground, clock, Mobile Pixel Link, configuration, and control connections because the complete 40-pin assignment is not reproduced on this page.
What is the supply voltage range of LM2506SQ?
The LM2506SQ operates from 2.5 V to 6.5 V, as identified in the National Semiconductor LM2506 documentation. This range supports common embedded display signaling environments. The permitted operating points, decoupling requirements, and startup behavior must still be checked against the datasheet because the supply range alone does not define every rail-timing condition.
Can LM2506SQ be used for an 18-bit RGB display?
Yes, the LM2506SQ is specifically identified as an 18-bit RGB Mobile Pixel Link Level 0 serializer/deserializer. It supports up to 320 Mbps data transfer through 22 serializer inputs and 3 deserializer outputs. According to the manufacturer datasheet, the display source and receiver must support compatible Mobile Pixel Link timing and configuration for the interface to operate as intended.
Where can I buy LM2506SQ online?
Use the Request a Quote form on this page to request LM2506SQ availability, current commercial terms, and a quotation. The form is the appropriate route for checking stock, minimum order quantity, and lead time without relying on a static price that may no longer reflect the market. Specify the required package, quantity, and destination when submitting the request.
What is the price of LM2506SQ?
Use the Request a Quote form on this page for the current LM2506SQ quotation and commercial terms. Pricing can change with quantity, package availability, and market conditions, so a static price figure would age quickly. Include your required quantity, production schedule, and shipping destination in the request to receive an actionable quotation.
What is the lead time for LM2506SQ?
Request the current LM2506SQ lead time through the Request a Quote form on this page. Lead time can vary with order quantity, package form, and current component availability. Providing the planned build quantity and required delivery date allows the supplier to confirm a realistic schedule and identify any procurement constraints before the design enters production.
Is LM2506SQ in stock?
Current LM2506SQ stock status is not stated on this page. Submit a Request a Quote inquiry to confirm availability for the required quantity and package configuration. Avoid treating a general market listing as a guaranteed allocation, particularly when validating a new PCB design, because inventory can change before a replenishment order is placed.
What can replace LM2506SQ?
LM2506SQ/NOPB is the closest verified same-family option because it retains the 320 Mbps serializer/deserializer function, 22 serializer inputs, 3 deserializer outputs, and 40-WQFN 5 x 5 mm package. LM2506SQX/NOPB provides the same listed interface and package configuration with a different ordering suffix. Confirm lead-free finish, reel configuration, temperature grade, and every manufacturer datasheet limit before production substitution.
Is LM2506SQ the same as LM2506SQ/NOPB?
LM2506SQ and LM2506SQ/NOPB have the same listed core interface characteristics: 320 Mbps operation, 22 serializer inputs, 3 deserializer outputs, and a 40-WQFN 5 x 5 mm package. The NOPB suffix distinguishes ordering or finish-related configuration. According to the manufacturer documentation, use the exact ordering table to verify whether that suffix affects terminal finish, packing, or qualification for the production environment.
What is the best Texas Instruments equivalent for LM2506SQ?
LM2506SQ/NOPB is the best directly documented Texas Instruments alternative in the verified part listings because its speed, interface direction counts, and 40-WQFN package match LM2506SQ. LM2506SQX/NOPB offers the same listed core specifications for a different ordering suffix. Neither should be selected solely from the suffix; compare ordering codes, packing details, temperature range, and lifecycle status in the manufacturer datasheet.
LM2506SQ vs LM2506SQ/NOPB: which is better for a new PCB design?
Choose LM2506SQ/NOPB when its ordering finish and qualification requirements match the production design; both parts are listed at 320 Mbps with 22 serializer inputs, 3 deserializer outputs, and a 40-WQFN package. According to the LM2506 documentation, the suffix affects ordering details rather than the headline interface configuration. The final decision should follow the manufacturer ordering information and your environmental requirements.
When should I choose LM2506SQ over another Mobile Pixel Link interface?
Choose LM2506SQ when the display system requires a 320 Mbps Mobile Pixel Link Level 0 interface, 18-bit RGB data, a 2.5 V to 6.5 V operating range, and a 40-WQFN 5 x 5 mm footprint. Select another interface only when its lane count, clocking method, voltage range, protocol level, display timing, or package differs from those requirements. The source and panel endpoints must both support the selected link.
Is LM2506SQ suitable for a compact industrial display?
The LM2506SQ is suitable for a compact industrial display when both controller and panel support the 18-bit RGB Mobile Pixel Link Level 0 interface. Its 320 Mbps capability and reduced trace count can simplify display interconnect, while the 2.5 V to 6.5 V supply range fits common embedded rails. Industrial temperature, EMC, reliability, and lifecycle requirements must be verified separately from the functional interface match.

Technische Referenzdaten für LM2506SQ – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose LM2506SQ when the graphics controller and display both support the 18-bit RGB Mobile Pixel Link Level 0 interface, the link must operate up to 320 Mbps, and the PCB is designed around the 40-WQFN 5 x 5 mm footprint. LM2506SQ/NOPB is appropriate when the documented NOPB ordering configuration satisfies production requirements, while LM2506SQX/NOPB provides another same-family option whose packing and qualification details must be checked. Consider the base LM2506 or LM2506X when the ordering table offers a preferable configuration without changing the core interface. No verified cross-brand drop-in replacement was identified, so changing manufacturers requires a full protocol, timing, footprint, and firmware initialization review rather than an assumed substitution.

Vergleich mit Alternativen

Parameter Dieses Produkt LM2506SQ/NOPB LM2506SQX/NOPB LM2506 LM2506X LM2506X/NOPB
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 40-WQFN (5 x 5 mm) 40-WQFN (5 x 5 mm) 40-WQFN (5 x 5 mm) 40-WQFN (5 x 5 mm) 40-WQFN (5 x 5 mm) 40-WQFN (5 x 5 mm)
Device Type Serializer/Deserializer Serializer/Deserializer Serializer/Deserializer Serializer/Deserializer Serializer/Deserializer Serializer/Deserializer
Ordering Suffix SQ SQ/NOPB SQX/NOPB Base ordering code X suffix X/NOPB

Wichtigste Unterscheidungsmerkmale

  • Directly documented same-family interface configuration (vs. LM2506SQ/NOPB)
  • Pin-compatible ordering option with a distinct suffix (vs. LM2506SQX/NOPB)
  • Base-family ordering flexibility (vs. LM2506)

Designhinweise

Use a continuous reference plane beneath the Mobile Pixel Link connections and route the high-speed pair as a controlled impedance structure. Match the trace geometry to the manufacturer recommendations, keep the pair length balanced, and avoid stubs, unnecessary vias, and abrupt reference-plane changes. The 40-WQFN footprint also requires careful fan-out planning so display traces are not trapped between fine-pitch pads.

Follow the LM2506 datasheet's supply, decoupling, and power-sequencing requirements exactly. Place required decoupling capacitance at the appropriate power pins with short ground paths, and keep return current continuous beneath the device. Although the stated operating range is 2.5 V to 6.5 V, regulation at the load depends on the complete power tree, trace resistance, transient response, and whether the selected display load remains within the device's operating limits.

Treat the exposed pad as both an electrical and thermal feature. Follow the land pattern and solder-process recommendations in the manufacturer package drawing, connect the pad to the intended ground plane, and provide uninterrupted copper where space allows. Validate temperature rise using the actual PCB stack-up, enclosure, airflow, and display load. Do not assume the package's maximum power rating describes the dissipation sustainable in every board layout.

Do not substitute a similar serializer solely because the data rate matches. Confirm protocol level, pixel width, lane topology, clock source, initialization sequence, supply range, exposed-pad arrangement, and pin names. In particular, ordering suffixes can distinguish finish, packing, or qualification. Archive the exact manufacturer ordering table and datasheet revision used for production release so procurement, assembly, and engineering use the same device configuration.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance status must be confirmed for the exact LM2506SQ ordering code in the manufacturer product and ordering documentation. The NOPB suffix alone should not be treated as proof of lead-free, halogen-free, RoHS, REACH, or automotive qualification.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

LM2506SQ datasheet LM2506SQ datasheet pdf LM2506SQ pinout LM2506SQ specifications LM2506SQ 320 Mbps LM2506SQ WQFN package LM2506SQ replacement LM2506SQ equivalent LM2506SQ vs LM2506SQ/NOPB Texas Instruments LM2506SQ LM2506SQ price LM2506SQ stock

Verwandte Bauteile & Begriffe

Texas Instruments National Semiconductor LM2506SQ LM2506SQ/NOPB LM2506SQX/NOPB LM2506 LM2506X LM2506X/NOPB Serializer/Deserializer Mobile Pixel Link MPL Level 0 18-bit RGB Display interface IC Interface IC Semiconductor Low Power Mobile Pixel Link 320 Mbps 2.5 V to 6.5 V 40-WQFN QFN package family Surface Mount Embedded display Differential signal integrity Pixel data serialization
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen