LM2506SQ - 320 Mbps Pixel Link Serializer | Texas Instruments
MPN: LM2506SQ ✓ فعالLM2506SQ جائزہ
A Mobile Pixel Link serializer/deserializer is a display-interface IC that converts parallel pixel data into a high-speed serial link and reconstructs parallel data at the receiving endpoint. It belongs to the serializer/deserializer class within interface ICs and system-level display transport. The Mobile Pixel Link architecture reduces the number of PCB signal traces required between a graphics engine and display, which is especially useful where connector count, board area, EMI control, and power efficiency are important.
The LM2506SQ supports data rates up to 320 Mbps and is intended for 18-bit RGB display interfaces. Its low-power design targets compact embedded and mobile equipment rather than general-purpose storage or networking links. The 40-WQFN package provides a dense surface-mount footprint, while the serializer/deserializer arrangement allows display data to be transmitted over fewer conductors than a conventional parallel RGB bus.
Operation from 2.5 V to 6.5 V permits integration with common embedded display systems that use either 3.3 V or 5 V signaling environments. The manufacturer datasheet is the controlling document for timing, electrical limits, initialization, color mapping, and pin-level implementation. Engineers should treat the specified clocking, lane timing, power sequencing, and display timing values as mandatory constraints rather than infer them from the 320 Mbps headline rate.
Typical uses include small-format LCD and OLED panels, portable instruments, industrial human-machine interfaces, automotive display modules, medical monitoring displays, and compact embedded systems. The LM2506SQ is most appropriate when both ends of the link can be configured for Mobile Pixel Link and when reduced trace count is more valuable than retaining a wide parallel RGB interface.
A critical design step is verifying the complete panel-side connection, including supply sequencing, clock source, ground distribution, differential pair routing, and display timing initialization. Route high-speed links on a continuous reference plane, maintain the manufacturer-recommended spacing, and avoid introducing stubs or test-point discontinuities that can degrade signal integrity.
This page combines the LM2506 interface characteristics, verified package and rate details, same-family replacement options, comparison parameters, and practical PCB guidance to support faster component selection and board design.
کے لیے ڈراپ اِن متبادل LM2506SQ — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔
اس سیریز میں مختلف ورژن
اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں LM2506SQ (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Interface, Package, Product Type, Supply Voltage Range.
LM2506SQ/NOPB
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LM2506SQX/NOPB
✅ ڈراپ-اِن📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LM25066PSQ/NOPB
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہقیمت کے لیے رابطہ کریں
ڈیٹا شیٹ دیکھیں →LM2506X
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LM2506X/NOPB
✅ ڈراپ-اِن ⚠️ تفصیلات غیر تصدیق شدہ📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)
LM2506SQ تفصیلات
| Product Type | Serializer/Deserializer |
| انٹرفیس | Low Power Mobile Pixel Link (MPL) Level 0 |
| Maximum Data Rate | 320 Mbps |
| Pixel Data Format | 18-bit RGB |
| Serializer Inputs | 22 inputs |
| Deserializer Outputs | 3 outputs |
| Supply Voltage Range | 2.5 V to 6.5 V |
| زیادہ سے زیادہ آؤٹ پٹ کرنٹ | 1.5 A |
| Maximum Power Dissipation | 15 W |
| پیکیج | 40-WQFN, 5 x 5 mm |
| ماؤنٹنگ ٹائپ | Surface Mount |
LM2506SQ 40-wqfn, 5 x 5 mm پن کنفیگریشن گائیڈ
LM2506SQ (40-wqfn, 5 x 5 mm پیکیج) کے لیے پن کنفیگریشن۔ پن نمبرنگ، فنکشنز اور کنکشن ڈایاگرامز مینوفیکچرر کے ڈیٹا شیٹ میں بیان کیے گئے ہیں۔ درست فٹ پرنٹ اور سولڈرنگ رہنما ہدایات کے لیے اسی سے رجوع کریں۔
کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں LM2506SQ.
رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔
عام استعمالات
LM2506SQ کے لیے موزوں ہے 6 ایپلیکیشنs: Compact Embedded LCD, Portable Medical Monitor, Industrial Human-Machine Interface, Automotive Display Module, Portable Instrument Display, Embedded OLED Control Board.
Compact Embedded LCD
The LM2506SQ fits a compact embedded LCD when the controller and panel support 18-bit RGB Mobile Pixel Link Level 0 signaling. Its 320 Mbps maximum data rate and 22 serializer inputs move the display connection toward a compact high-speed link, reducing the number of parallel RGB traces that must cross the PCB. The 2.5 V to 6.5 V supply range also accommodates common embedded supply rails. The trade-off is endpoint dependence: both the graphics source and display receiver must use compatible clocking, initialization, and timing. Panel timing, lane routing, and refresh-rate requirements should therefore be confirmed before committing to the device.
تجویز کردہ
Portable Medical Monitor
The LM2506SQ can support a portable medical-monitor display when its interface matches the selected panel and the product requires a compact PCB interconnect. Supporting up to 320 Mbps and 18-bit RGB provides sufficient transport capability for many embedded display timing schemes while avoiding the routing burden of a full parallel bus. The 2.5 V to 6.5 V operating range simplifies integration with common embedded power systems. Medical suitability still depends on the complete system risk assessment, electrical-safety requirements, electromagnetic compatibility, and the manufacturer qualification status applicable to the exact ordering code.
تجویز کردہ
Industrial Human-Machine Interface
The LM2506SQ is appropriate for an industrial human-machine interface when the display controller supports Mobile Pixel Link Level 0 and the panel operates within the device's environmental limits. The 320 Mbps rate supports high-speed serialized transport, while 22 serializer inputs and 3 deserializer outputs match the LM2506 interface organization. Using a serial display link can reduce connector density and improve PCB routing flexibility in space-constrained control panels. The implementation must preserve signal integrity on the high-speed links, provide a continuous reference plane, and follow the manufacturer power-up and initialization sequence. Industrial qualification and long-term availability must be confirmed for the selected suffix.
تجویز کردہ
Automotive Display Module
تجویز کردہ
Portable Instrument Display
The LM2506SQ is suitable for a portable instrument display when the selected controller supports 18-bit RGB Mobile Pixel Link and board space or connector density is the main constraint. A 320 Mbps serial link can replace a wider parallel pixel route, helping reduce conductor count and simplify multilayer routing around batteries, analog sections, and communication circuitry. Its 2.5 V to 6.5 V supply range allows use with common embedded rails, although power sequencing and decoupling should follow the manufacturer recommendations. For battery-powered equipment, evaluate complete display power consumption rather than assuming the low-power interface designation alone determines the system's energy budget.
تجویز کردہ
Embedded OLED Control Board
The LM2506SQ can serve an embedded OLED control board when the graphic controller and panel use compatible Mobile Pixel Link timing and the required pixel depth is supported. Its 18-bit RGB capability and 320 Mbps interface rate provide a focused transport function for compact color displays. The 40-WQFN footprint reduces board area but demands careful escape routing, exposed-pad thermal handling, and assembly process control. Engineers should verify the panel's initialization requirements, supported timing range, and color mapping before selecting the IC. The design must also separate noisy display and switching-power paths from sensitive analog areas while maintaining a continuous return path beneath the high-speed link.
تجویز کردہ
تجویز کردہ پروڈکٹس کا خلاصہ
کے لیے انجینئرنگ ریفرنس ڈیٹا LM2506SQ — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔
انتخاب کی گائیڈ
متبادلات کے ساتھ موازنہ
| پیرامیٹر | یہ پروڈکٹ | LM2506SQ/NOPB | LM2506SQX/NOPB | LM2506 | LM2506X | LM2506X/NOPB |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 40-WQFN (5 x 5 mm) | 40-WQFN (5 x 5 mm) | 40-WQFN (5 x 5 mm) | 40-WQFN (5 x 5 mm) | 40-WQFN (5 x 5 mm) | 40-WQFN (5 x 5 mm) |
| Device Type | Serializer/Deserializer | Serializer/Deserializer | Serializer/Deserializer | Serializer/Deserializer | Serializer/Deserializer | Serializer/Deserializer |
| Ordering Suffix | SQ | SQ/NOPB | SQX/NOPB | Base ordering code | X suffix | X/NOPB |
اہم امتیازی خصوصیات
- Directly documented same-family interface configuration (بمقابلہLM2506SQ/NOPB)
- Pin-compatible ordering option with a distinct suffix (بمقابلہLM2506SQX/NOPB)
- Base-family ordering flexibility (بمقابلہLM2506)
ڈیزائن نوٹس
Use a continuous reference plane beneath the Mobile Pixel Link connections and route the high-speed pair as a controlled impedance structure. Match the trace geometry to the manufacturer recommendations, keep the pair length balanced, and avoid stubs, unnecessary vias, and abrupt reference-plane changes. The 40-WQFN footprint also requires careful fan-out planning so display traces are not trapped between fine-pitch pads.
Follow the LM2506 datasheet's supply, decoupling, and power-sequencing requirements exactly. Place required decoupling capacitance at the appropriate power pins with short ground paths, and keep return current continuous beneath the device. Although the stated operating range is 2.5 V to 6.5 V, regulation at the load depends on the complete power tree, trace resistance, transient response, and whether the selected display load remains within the device's operating limits.
Treat the exposed pad as both an electrical and thermal feature. Follow the land pattern and solder-process recommendations in the manufacturer package drawing, connect the pad to the intended ground plane, and provide uninterrupted copper where space allows. Validate temperature rise using the actual PCB stack-up, enclosure, airflow, and display load. Do not assume the package's maximum power rating describes the dissipation sustainable in every board layout.
Do not substitute a similar serializer solely because the data rate matches. Confirm protocol level, pixel width, lane topology, clock source, initialization sequence, supply range, exposed-pad arrangement, and pin names. In particular, ordering suffixes can distinguish finish, packing, or qualification. Archive the exact manufacturer ordering table and datasheet revision used for production release so procurement, assembly, and engineering use the same device configuration.
تعمیل کی معلومات
Compliance status must be confirmed for the exact LM2506SQ ordering code in the manufacturer product and ordering documentation. The NOPB suffix alone should not be treated as proof of lead-free, halogen-free, RoHS, REACH, or automotive qualification.